February 2021 - openstack-discuss

Fwd: DPDK+OVS with OpenStack
by Mark Wittling 23 Apr '25

23 Apr '25

Looking for someone who knows OpenStack with OpenVSwitch, and in addition to that, DPDK with OpenStack and OVS.I am using OpenStack Queens, with OpenVSwitch. The architecture I am using is documented here: https://docs.openstack.org/neutron/queens/admin/deploy-ovs-provider.htmlThe OVS I am using on the Compute Node, is compiled with DPDK, and I have enabled the datapath to netdev (DPDK) on br-prv (provider network bridge), and br-tun (tunneling bridge). But these two bridges, br-tun and br-prv, are patched into another OpenStack bridge, called br-int. I wasn’t actually sure about whether to tinker with this bridge, and wondered what datapath it was using.Then, I realized there is a parameter in the openvswitch_agent.ini file, which I will list here: # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - <No description provided> # netdev - <No description provided> #datapath_type = system datapath_type = netdev So in tinkering with this, what I realized, is that when you set this datapath_type to system or netdev, it will adjust the br-int bridge to that datapath type.So here is my question. How can I launch a non-DPDK VM, if all of the bridges are using the netdev datapath type?Here is another question. What if one of the flavors don’t have the largepages property set on them? I assumed OpenStack would revert to a system datapath and not use DPDK for those VM interfaces. Well, I found out in testing, that is not the case. If you set all your bridges up for netdev, and you don’t set the property on the Flavor of the VM (largepages), the VM will launch, but it simply won’t work.Is there no way, on a specific Compute Host, to support both DPDK (netdev datapaths) and non-DPDK (system datapaths)?Either on a VM interface level (VM has one interface that is netdev DPDK and another that is system datapath non-DPDK)?Or on a VM by VM basis (VM 1 has 1 or more netdev datapath interfaces and VM 2 has 1 or more system datapath interfaces)?Am I right here? Once you set up a Compute Host for DPDK, it’s DPDK or nothing on that Compute Host? (edited)

3 2

How to config DPDK compute in OVN
by dangerzone ar 22 Apr '25

22 Apr '25

Hi....as far I understand ovs does support dpdk compute to be deployed. I'm referring to the guideline ' *https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html <https://docs.openstack.org/networking-ovn/queens/admin/dpdk.html>* ' ... It's too brief.. May I know how to config dpdk compute in OVN networking openstack? Hope someone could help what is the config to be done.... Currently compute is run without dpdk over openstack train ovn based. Please need some info on how I can proceed. Thank you

2 1

[all] Dynamic Zuul results table in Gerrit 3
by Radosław Piliszek 04 Aug '22

04 Aug '22

Hello Fellow OpenStack and OpenDev Folks! TL;DR click on [3] and enjoy. I am starting this thread to not hijack the discussion happening on [1]. First of all, I would like to thank gibi (Balazs Gibizer) for hacking a way to get the place to render the table in the first place (pun intended). I have been a long-time-now user of [2]. I have improved and customised it for myself but never really got to share back the changes I made. The new Gerrit obviously broke the whole script so it was of no use to share at that particular state. However, inspired by gibi's work, I decided to finally sit down and fix it to work with Gerrit 3 and here it comes: [3]. Works well on Chrome with Tampermonkey. Not tested others. I hope you will enjoy this little helper (I do). I know the script looks super fugly but it generally boils down to a mix of styles of 3 people and Gerrit having funky UI rendering. Finally, I'd also like to thank hrw (Marcin Juszkiewicz) for linking me to the original Michel's script in 2019. [1] http://lists.openstack.org/pipermail/openstack-discuss/2020-November/019051… [2] https://opendev.org/x/coats/src/commit/444c95738677593dcfed0cfd9667d4c4f0d5… [3] https://gist.github.com/yoctozepto/7ea1271c299d143388b7c1b1802ee75e Kind regards, -yoctozepto

5 7

Nova not updating to new size of an extended in-use / attached cinder volume (Ceph RBD) to guest
by Christian Rohmann 28 Jun '22

28 Jun '22

Hello Openstack-Discuss, after some digging I found out that cinder learned to resize attached (in-use) volumes quite a while ago with the introduction of the initial "extend 'in-use' volume" feature: https://review.opendev.org/c/openstack/cinder/+/454287/ The support was then extended to also cover Ceph RBD backed volumes with: https://review.opendev.org/c/openstack/nova/+/613039/ Since this is only about the cinder part, I was wondering if nova would ever find out and would actively rescan the device / volume and quintessentially present an increased new size to the guest. Apparently this is where a certain volume-extended event comes into play: https://review.opendev.org/c/openstack/nova/+/454322/ that is to be emitted by cinder when a volume had been extened. I then went head and tried this with the openstack cli (as Horizon does not seem to support / offer to resize in-use volumes. I run Openstack Train with Ceph RBD as storage. First I ran into an issue with the openstack cli (https://bugs.launchpad.net/cinder/+bug/1871759/comments/2 <https://bugs.launchpad.net/cinder/+bug/1871759/comments/2>) but using cinder extend $volumeid $newsize I was able to resize in-use volumes just fine. The only thing missing was the propagation to the guest. I played around with SCSI rescans, but that did not work, reboots also failed to do anyting in this regards. Stopping and starting the VM did work, but why having the capability to online-resize an attached volume when not being able to resize the guest volume as well? Apparently there seems to be an old and somewhat similar observation / bug with https://bugs.launchpad.net/nova/+bug/1369465 So I was simply wondering if this is expected to be working? Are there any special settings / options I need to set to enable this feature? Thanks and with kind regards Christian

4 9

[nova][dev] Revisiting qemu emulation where guest arch != host arch
by Apsey, Christopher 05 Jan '22

05 Jan '22

All, A few years ago I asked a question[1] about why nova, when given a hw_architecture property from glance for an image, would not end up using the correct qemu-system-xx binary when starting the guest process on a compute node if that compute nodes architecture did not match the proposed guest architecture. As an example, if we had all x86 hosts, but wanted to run an emulated ppc guest, we should be able to do that given that at least one compute node had qemu-system-ppc already installed and libvirt was successfully reporting that as a supported architecture to nova. It seemed like a heavy lift at the time, so it was put on the back burner. I am now in a position to fund a contract developer to make this happen, so the question is: would this be a useful blueprint that would potentially be accepted? Most of the time when people want to run an emulated guest they would just nest it inside of an already running guest of the native architecture, but that severely limits observability and the task of managing any more than a handful of instances in this manner quickly becomes a tangled nightmare of networking, etc. I see real benefit in allowing this scenario to run natively so all of the tooling that exists for fleet management 'just works'. This would also be a significant differentiator for OpenStack as a whole. Thoughts? [1] http://lists.openstack.org/pipermail/openstack-operators/2018-August/015653… Chris Apsey Director | Georgia Cyber Range GEORGIA CYBER CENTER 100 Grace Hopper Lane | Augusta, Georgia | 30901 https://www.gacybercenter.org

2 2

Help with eventlet 0.26.1 and dnspython >= 2
by Thomas Goirand 04 Oct '21

04 Oct '21

Hi, As you may know, eventlet is incompatible with dnspython >= 2.0.0.0rc1. See [1] for the details. However, Debian unstable has 2.0.0. Would there be some good soul willing to help me fix this situation? I would need a patch to fix this, but I'm really not sure how to start. Cheers, Thomas Goirand (zigo)

8 15

[all]Introduction to venus which is the project of log management and has been contributed to the OpenStack community
by Liye Pang(逄立业) 10 Sep '21

10 Sep '21

Hello everyone, after feedback from a large number of operations and maintenance personnel in InCloud OpenStack, we developed the log management project “Venus” for the OpenStack projects and that has contributed to the OpenStack community. The following is an introduction to “Venus”. If there is interest in the community, we are interested in proposing it to become an official OpenStack project in the future. Background In the day-to-day operation and maintenance of large-scale cloud platform, the following problems are encountered： l Time-consuming for log querying while the server increasing to thousands. l Difficult to retrieve logs, since there are many modules in the platform, e.g. systems service, compute, storage, network and other platform services. l The large amount and dispersion of log make faults are difficult to be discovered. l Because of distributed and interaction between components of the cloud platform, and scattered logs between components, it will take more time to locate problems. About Venus According to the key requirements of OpenStack in log storage, retrieval, analysis and so on, we introduced Venus project, a unified log management module. This module can provide a one-stop solution to log collection, cleaning, indexing, analysis, alarm, visualization, report generation and other needs, which involves helping operator or maintainer to quickly solve retrieve problems, grasp the operational health of the platform, and improve the management capabilities of the cloud platform. Additionally, this module plans to use machine learning algorithms to quickly locate IT failures and root causes, and improve operation and maintenance efficiency. Application scenario Venus played a key role in the following scenarios： l Retrieval: Provide a simple and easy-to-use way to retrieve all log and the context. l Analysis: Realize log association, field value statistics, and provide multi-scene and multi-dimensional visual analysis reports. l Alerts：Convert retrieval into active alerts to realize the error finding in massive logs. l Issue location: Establish a chain relationship and knowledge graphs to quickly locate problems. Overall structure The architecture of log management system based on Venus and elastic search is as follows: Diagram 0: Architecture of Venus venus_api: API module，provide API、rest-api service. venus_manager: Internal timing task module to realize the core functions of the log system. Current progress The current progress of the Venus project is as follows: l Collection：Develop fluentd collection tasks based on collectd to read, filter, format and send plug-ins for OpenStack, operating systems, and platform services, etc. l Index：Dealing with multi-dimensional index data in elasticsearch, and provide more concise and comprehensive authentication interface to return query results. l Analysis：Analyzing and display the related module errors, Mariadb connection errors, and Rabbitmq connection errors. l Alerts：Develop alarm task code to set threshold for the number of error logs of different modules at different times, and provides alarm services and notification services. l Location：Develop the call chain analysis function based on global_requested series, which can show the execution sequence, time and error information, etc., and provide the export operation. l Management：Develop configuration management functions in the log system, such as alarm threshold setting, timing task management, and log saving time setting, etc. Application examples Two examples of Venus application scenarios are as follows. 1. The virtual machine creation operation was performed on the cloud platform and it was found that the virtual machine was not created successfully. First, we can find the request id of the operation and jump to the virtual machine creation call chain page. Then, we can query the calling process, view and download the details of the log of the call. 2. In the cloud platform, the error log of each module can be converted into alarms to remind the users. Further, we can retrieve the details of the error log and error log statistics. Next step The next step of the Venus project is as follows: * Collection：In addition to fluent, other collection plugins such as logstash will be integrated. * Analysis: Explore more operation and maintenance scenarios, and conduct statistical analysis and alarm on key data. * display: The configuration, analysis and alarm of Venus will be integrated into horizon in the form of plugin. * location: Form clustering log and construct knowledge map, and integrate algorithm class library to locate the root cause of the fault. Venus Project Registry Venus library: https://opendev.org/inspur/venus You can grab the source code using the following git command: git clone https://opendev.org/inspur/venus.git Venus Demo Youtu.be: <https://youtu.be/mE2MoEx3awM> https://youtu.be/mE2MoEx3awM

7 15

[simplification] Making ask.openstack.org read-only
by Thierry Carrez 27 May '21

27 May '21

Hi everyone, This has been discussed several times on this mailing list in the past, but we never got to actually pull the plug. Ask.openstack.org was launched in 2013. The reason for hosting our own setup was to be able to support multiple languages, while StackOverflow rejected our proposal to have our own openstack-branded StackExchange site. The Chinese ask.o.o side never really took off. The English side also never really worked perfectly (like email alerts are hopelessly broken), but we figured it would get better with time if a big community formed around it. Fast-forward to 2020 and the instance is lacking volunteers to help run it, while the code (and our customization of it) has become more complicated to maintain. It regularly fails one way or another, and questions there often go unanswered, making us look bad. Of the top 30 users, most have abandoned the platform since 2017, leaving only Bernd Bausch actively engaging and helping moderate questions lately. We have called for volunteers several times, but the offers for help never really materialized. At the same time, people are asking OpenStack questions on StackOverflow, and sometimes getting answers there[1]. The fragmentation of the "questions" space is not helping users getting good answers. I think it's time to pull the plug, make ask.openstack.org read-only (so that links to old answers are not lost) and redirect users to the mailing-list and the "OpenStack" tag on StackOverflow. I picked StackOverflow since it seems to have the most openstack questions (2,574 on SO, 76 on SuperUser and 430 on ServerFault). We discussed that option several times, but I now proposed a change to actually make it happen: https://review.opendev.org/#/c/746497/ It's always a difficult decision to make to kill a resource, but I feel like in this case, consolidation and simplification would help. Thoughts, comments? [1] https://stackoverflow.com/questions/tagged/openstack -- Thierry

10 18

[stein][neutron] gratuitous arp
by Ignazio Cassano 13 May '21

13 May '21

Hello, I have a problem on stein neutron. When a vm migrate from one node to another I cannot ping it for several minutes. If in the vm I put a script that ping the gateway continously, the live migration works fine and I can ping it. Why this happens ? I read something about gratuitous arp. Please, help me ? Any workaround , please ? Best Regards Ignazio

3 33

[ironic] Announcing deprecation of the iSCSI deploy interface
by Dmitry Tantsur 04 May '21

04 May '21

Hi all, Following up to the previous mailing list [1] and virtual meetup [2] discussions, I would like to announce the plans to deprecate the 'iscsi' deploy interface. This is the updated plan discussed on the virtual meetup: 1) In the Victoria cycle (i.e. right now): - Fill in the detected feature gaps [3]. - Switch off the iscsi deploy interface by default. - Change [agent]image_dowload_source to HTTP by default. - Give the direct deploy a higher priority, so that it's used by default unless disabled. - Mark it as deprecated in the code (causing warnings when enabled). - Release a major version of ironic to highlight the defaults changes. 2) In the W cycle: - Keep the iscsi deploy deprecated. - Listen to operators' feedback. 3) In the X cycle - Remove the iscsi deploy completely from ironic and IPA. - Remove support code from ironic-lib with a major version bump. Please let us know if you have any questions or concerns. Dmitry [1] http://lists.openstack.org/pipermail/openstack-discuss/2020-August/016681.h… [2] https://etherpad.opendev.org/p/Ironic-Victoria-midcycle [3] https://storyboard.openstack.org/#!/story/2008075 -- Red Hat GmbH, https://de.redhat.com/ , Registered seat: Grasbrunn, Commercial register: Amtsgericht Muenchen, HRB 153243, Managing Directors: Charles Cachera, Brian Klemm, Laurie Krebs, Michael O'Neill

1 1

[barbican][oslo][nova][glance][cinder] cursive library status
by Brian Rosmaita 03 May '21

03 May '21

Hello Barbican team, Apologies for not including barbican in the previous thread on this topic: http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019430… The situation is that cursive is used by Nova, Glance, and Cinder and we'd like to move it out of the 'x' namespace into openstack governance. The question is then what team would oversee it. It seems like a good fit for Oslo, and the Oslo team seems OK with that, but since barbican-core is currently included in cursive-core, it make sense to give the Barbican team first dibs. From the consuming teams' side, I don't think we have a preference as long as it's clear who we need to bother about approvals if a bugfix is posted for review. Thus my ask is that the Barbican team indicate whether they'd like to move cursive to the 'openstack' namespace under their governance, or whether they'd prefer Oslo to oversee the library. Thank you! brian

5 5

[Murano] Please help with murano image creation
by Bujack, Stefan 19 Apr '21

19 Apr '21

Hello, we want to create the murano image for an openstack victoria deployment. We tried to follow this documentation: https://docs.openstack.org/murano/victoria/reference/appendix/articles/imag… But we were not able to successfully create an image. At first we got the following error: murano-agent requires Python '>=3.6' but the running Python is 2.7.17 Then I changed the release to focal and got another error: Unable to locate package python-pip Is anybody so kind to help me with this problem? Many thanks in advance Greets Stefan Bujack root@kolla-2:~# cat /etc/issue Ubuntu 20.04.2 LTS \n \l root@kolla-2:~# export GITDIR=~/git root@kolla-2:~# mkdir -p $GITDIR root@kolla-2:~# cd $GITDIR root@kolla-2:~/git# git clone https://opendev.org/openstack/murano Cloning into 'murano'... remote: Enumerating objects: 34335, done. remote: Counting objects: 100% (34335/34335), done. remote: Compressing objects: 100% (14856/14856), done. remote: Total 34335 (delta 22813), reused 29217 (delta 18268) Receiving objects: 100% (34335/34335), 16.73 MiB | 7.42 MiB/s, done. Resolving deltas: 100% (22813/22813), done. root@kolla-2:~/git# git clone https://opendev.org/openstack/murano-agent Cloning into 'murano-agent'... remote: Enumerating objects: 6696, done. remote: Counting objects: 100% (6696/6696), done. remote: Compressing objects: 100% (2792/2792), done. remote: Total 6696 (delta 3766), reused 6475 (delta 3586) Receiving objects: 100% (6696/6696), 4.98 MiB | 5.46 MiB/s, done. Resolving deltas: 100% (3766/3766), done. root@kolla-2:~/git# pip3 install diskimage-builder Collecting diskimage-builder Downloading diskimage_builder-3.7.0-py3-none-any.whl (608 kB) |████████████████████████████████| 608 kB 4.8 MB/s Requirement already satisfied: stevedore>=1.20.0 in /usr/lib/python3/dist-packages (from diskimage-builder) (1.32.0) Collecting flake8<4.0.0,>=3.6.0 Downloading flake8-3.8.4-py2.py3-none-any.whl (72 kB) |████████████████████████████████| 72 kB 1.6 MB/s Requirement already satisfied: pbr!=2.1.0,>=2.0.0 in /usr/lib/python3/dist-packages (from diskimage-builder) (5.4.5) Collecting networkx>=1.10 Downloading networkx-2.5-py3-none-any.whl (1.6 MB) |████████████████████████████████| 1.6 MB 7.6 MB/s Requirement already satisfied: PyYAML>=3.12 in /usr/lib/python3/dist-packages (from diskimage-builder) (5.3.1) Collecting pycodestyle<2.7.0,>=2.6.0a1 Downloading pycodestyle-2.6.0-py2.py3-none-any.whl (41 kB) |████████████████████████████████| 41 kB 331 kB/s Collecting pyflakes<2.3.0,>=2.2.0 Downloading pyflakes-2.2.0-py2.py3-none-any.whl (66 kB) |████████████████████████████████| 66 kB 5.8 MB/s Collecting mccabe<0.7.0,>=0.6.0 Downloading mccabe-0.6.1-py2.py3-none-any.whl (8.6 kB) Requirement already satisfied: decorator>=4.3.0 in /usr/lib/python3/dist-packages (from networkx>=1.10->diskimage-builder) (4.4.2) Installing collected packages: pycodestyle, pyflakes, mccabe, flake8, networkx, diskimage-builder Successfully installed diskimage-builder-3.7.0 flake8-3.8.4 mccabe-0.6.1 networkx-2.5 pycodestyle-2.6.0 pyflakes-2.2.0 root@kolla-2:~/git# apt install qemu-utils curl tox Reading package lists... Done Building dependency tree Reading state information... Done curl is already the newest version (7.68.0-1ubuntu2.4). curl set to manually installed. The following additional packages will be installed: ibverbs-providers javascript-common libboost-iostreams1.71.0 libboost-thread1.71.0 libibverbs1 libiscsi7 libjs-jquery libjs-sphinxdoc libjs-underscore libnl-route-3-200 librados2 librbd1 librdmacm1 python3-distlib python3-filelock python3-pluggy python3-py python3-toml python3-virtualenv qemu-block-extra sharutils virtualenv Suggested packages: apache2 | lighttpd | httpd subversion python3-pytest debootstrap sharutils-doc bsd-mailx | mailx The following NEW packages will be installed: ibverbs-providers javascript-common libboost-iostreams1.71.0 libboost-thread1.71.0 libibverbs1 libiscsi7 libjs-jquery libjs-sphinxdoc libjs-underscore libnl-route-3-200 librados2 librbd1 librdmacm1 python3-distlib python3-filelock python3-pluggy python3-py python3-toml python3-virtualenv qemu-block-extra qemu-utils sharutils tox virtualenv 0 upgraded, 24 newly installed, 0 to remove and 14 not upgraded. Need to get 8108 kB of archives. After this operation, 37.8 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libnl-route-3-200 amd64 3.4.0-1 [149 kB] Get:2 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libibverbs1 amd64 28.0-1ubuntu1 [53.6 kB] Get:3 http://de.archive.ubuntu.com/ubuntu focal/main amd64 ibverbs-providers amd64 28.0-1ubuntu1 [232 kB] Get:4 http://de.archive.ubuntu.com/ubuntu focal/main amd64 javascript-common all 11 [6066 B] Get:5 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libboost-iostreams1.71.0 amd64 1.71.0-6ubuntu6 [237 kB] Get:6 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libboost-thread1.71.0 amd64 1.71.0-6ubuntu6 [249 kB] Get:7 http://de.archive.ubuntu.com/ubuntu focal/main amd64 librdmacm1 amd64 28.0-1ubuntu1 [64.9 kB] Get:8 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libiscsi7 amd64 1.18.0-2 [63.9 kB] Get:9 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libjs-jquery all 3.3.1~dfsg-3 [329 kB] Get:10 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libjs-underscore all 1.9.1~dfsg-1 [98.6 kB] Get:11 http://de.archive.ubuntu.com/ubuntu focal/main amd64 libjs-sphinxdoc all 1.8.5-7ubuntu3 [97.1 kB] Get:12 http://de.archive.ubuntu.com/ubuntu focal-updates/main amd64 librados2 amd64 15.2.7-0ubuntu0.20.04.2 [3204 kB] Get:13 http://de.archive.ubuntu.com/ubuntu focal-updates/main amd64 librbd1 amd64 15.2.7-0ubuntu0.20.04.2 [1609 kB] Get:14 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-distlib all 0.3.0-1 [116 kB] Get:15 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-filelock all 3.0.12-2 [7948 B] Get:16 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-pluggy all 0.13.0-2 [18.4 kB] Get:17 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-py all 1.8.1-1 [65.4 kB] Get:18 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-toml all 0.10.0-3 [14.6 kB] Get:19 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 python3-virtualenv all 20.0.17-1 [63.4 kB] Get:20 http://de.archive.ubuntu.com/ubuntu focal-updates/main amd64 qemu-block-extra amd64 1:4.2-3ubuntu6.12 [53.8 kB] Get:21 http://de.archive.ubuntu.com/ubuntu focal-updates/main amd64 qemu-utils amd64 1:4.2-3ubuntu6.12 [974 kB] Get:22 http://de.archive.ubuntu.com/ubuntu focal/main amd64 sharutils amd64 1:4.15.2-4build1 [155 kB] Get:23 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 virtualenv all 20.0.17-1 [2132 B] Get:24 http://de.archive.ubuntu.com/ubuntu focal/universe amd64 tox all 3.13.2-2 [244 kB] Fetched 8108 kB in 0s (31.9 MB/s) Selecting previously unselected package libnl-route-3-200:amd64. (Reading database ... 118797 files and directories currently installed.) Preparing to unpack .../00-libnl-route-3-200_3.4.0-1_amd64.deb ... Unpacking libnl-route-3-200:amd64 (3.4.0-1) ... Selecting previously unselected package libibverbs1:amd64. Preparing to unpack .../01-libibverbs1_28.0-1ubuntu1_amd64.deb ... Unpacking libibverbs1:amd64 (28.0-1ubuntu1) ... Selecting previously unselected package ibverbs-providers:amd64. Preparing to unpack .../02-ibverbs-providers_28.0-1ubuntu1_amd64.deb ... Unpacking ibverbs-providers:amd64 (28.0-1ubuntu1) ... Selecting previously unselected package javascript-common. Preparing to unpack .../03-javascript-common_11_all.deb ... Unpacking javascript-common (11) ... Selecting previously unselected package libboost-iostreams1.71.0:amd64. Preparing to unpack .../04-libboost-iostreams1.71.0_1.71.0-6ubuntu6_amd64.deb ... Unpacking libboost-iostreams1.71.0:amd64 (1.71.0-6ubuntu6) ... Selecting previously unselected package libboost-thread1.71.0:amd64. Preparing to unpack .../05-libboost-thread1.71.0_1.71.0-6ubuntu6_amd64.deb ... Unpacking libboost-thread1.71.0:amd64 (1.71.0-6ubuntu6) ... Selecting previously unselected package librdmacm1:amd64. Preparing to unpack .../06-librdmacm1_28.0-1ubuntu1_amd64.deb ... Unpacking librdmacm1:amd64 (28.0-1ubuntu1) ... Selecting previously unselected package libiscsi7:amd64. Preparing to unpack .../07-libiscsi7_1.18.0-2_amd64.deb ... Unpacking libiscsi7:amd64 (1.18.0-2) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../08-libjs-jquery_3.3.1~dfsg-3_all.deb ... Unpacking libjs-jquery (3.3.1~dfsg-3) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../09-libjs-underscore_1.9.1~dfsg-1_all.deb ... Unpacking libjs-underscore (1.9.1~dfsg-1) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../10-libjs-sphinxdoc_1.8.5-7ubuntu3_all.deb ... Unpacking libjs-sphinxdoc (1.8.5-7ubuntu3) ... Selecting previously unselected package librados2. Preparing to unpack .../11-librados2_15.2.7-0ubuntu0.20.04.2_amd64.deb ... Unpacking librados2 (15.2.7-0ubuntu0.20.04.2) ... Selecting previously unselected package librbd1. Preparing to unpack .../12-librbd1_15.2.7-0ubuntu0.20.04.2_amd64.deb ... Unpacking librbd1 (15.2.7-0ubuntu0.20.04.2) ... Selecting previously unselected package python3-distlib. Preparing to unpack .../13-python3-distlib_0.3.0-1_all.deb ... Unpacking python3-distlib (0.3.0-1) ... Selecting previously unselected package python3-filelock. Preparing to unpack .../14-python3-filelock_3.0.12-2_all.deb ... Unpacking python3-filelock (3.0.12-2) ... Selecting previously unselected package python3-pluggy. Preparing to unpack .../15-python3-pluggy_0.13.0-2_all.deb ... Unpacking python3-pluggy (0.13.0-2) ... Selecting previously unselected package python3-py. Preparing to unpack .../16-python3-py_1.8.1-1_all.deb ... Unpacking python3-py (1.8.1-1) ... Selecting previously unselected package python3-toml. Preparing to unpack .../17-python3-toml_0.10.0-3_all.deb ... Unpacking python3-toml (0.10.0-3) ... Selecting previously unselected package python3-virtualenv. Preparing to unpack .../18-python3-virtualenv_20.0.17-1_all.deb ... Unpacking python3-virtualenv (20.0.17-1) ... Selecting previously unselected package qemu-block-extra:amd64. Preparing to unpack .../19-qemu-block-extra_1%3a4.2-3ubuntu6.12_amd64.deb ... Unpacking qemu-block-extra:amd64 (1:4.2-3ubuntu6.12) ... Selecting previously unselected package qemu-utils. Preparing to unpack .../20-qemu-utils_1%3a4.2-3ubuntu6.12_amd64.deb ... Unpacking qemu-utils (1:4.2-3ubuntu6.12) ... Selecting previously unselected package sharutils. Preparing to unpack .../21-sharutils_1%3a4.15.2-4build1_amd64.deb ... Unpacking sharutils (1:4.15.2-4build1) ... Selecting previously unselected package virtualenv. Preparing to unpack .../22-virtualenv_20.0.17-1_all.deb ... Unpacking virtualenv (20.0.17-1) ... Selecting previously unselected package tox. Preparing to unpack .../23-tox_3.13.2-2_all.deb ... Unpacking tox (3.13.2-2) ... Setting up javascript-common (11) ... Setting up python3-filelock (3.0.12-2) ... Setting up python3-py (1.8.1-1) ... Setting up python3-distlib (0.3.0-1) ... Setting up libboost-iostreams1.71.0:amd64 (1.71.0-6ubuntu6) ... Setting up libnl-route-3-200:amd64 (3.4.0-1) ... Setting up python3-toml (0.10.0-3) ... Setting up python3-pluggy (0.13.0-2) ... Setting up libboost-thread1.71.0:amd64 (1.71.0-6ubuntu6) ... Setting up libjs-jquery (3.3.1~dfsg-3) ... Setting up sharutils (1:4.15.2-4build1) ... Setting up libjs-underscore (1.9.1~dfsg-1) ... Setting up libibverbs1:amd64 (28.0-1ubuntu1) ... Setting up ibverbs-providers:amd64 (28.0-1ubuntu1) ... Setting up python3-virtualenv (20.0.17-1) ... Setting up virtualenv (20.0.17-1) ... Setting up libjs-sphinxdoc (1.8.5-7ubuntu3) ... Setting up librdmacm1:amd64 (28.0-1ubuntu1) ... Setting up librados2 (15.2.7-0ubuntu0.20.04.2) ... Setting up tox (3.13.2-2) ... Setting up librbd1 (15.2.7-0ubuntu0.20.04.2) ... Setting up libiscsi7:amd64 (1.18.0-2) ... Setting up qemu-block-extra:amd64 (1:4.2-3ubuntu6.12) ... Setting up qemu-utils (1:4.2-3ubuntu6.12) ... Processing triggers for libc-bin (2.31-0ubuntu9.2) ... Processing triggers for man-db (2.9.1-1) ... Processing triggers for install-info (6.7.0.dfsg.2-5) ... root@kolla-2:~/git# export ELEMENTS_PATH=$GITDIR/murano/contrib/elements:$GITDIR/murano-agent/contrib/elements root@kolla-2:~/git# disk-image-create vm ubuntu murano-agent -o murano-agent.qcow2 2021-02-18 12:52:34.387 | murano-agent requires Python '>=3.6' but the running Python is 2.7.17 root@kolla-2:~/git# export DIB_RELEASE=focal root@kolla-2:~/git# disk-image-create vm ubuntu murano-agent -o murano-agent.qcow2 2021-02-18 12:55:41.222 | E: Unable to locate package python-pip

2 1

[oslo][security-sig] Please revisit your open vulnerability report
by Jeremy Stanley 12 Apr '21

12 Apr '21

Please help the OpenStack Vulnerability Management Team by taking a look at the following report: keystonemiddleware connections to memcached from neutron-server grow beyond configured values https://launchpad.net/bugs/1883659 Can it be exploited by a nefarious actor, and if so, how? Is it likely to be fixable in all our supported stable branches, respecting stable backport policy? What deployment configurations and options might determine whether a particular installation is susceptible? This is the sort of feedback we depend on to make determinations regarding whether and how to keep the public notified, so they can make informed decisions. Thanks for doing your part to keep our users safe! -- Jeremy Stanley

2 6

[dev][cinder][keystone] Properly consuming system-scope in cinder
by Lance Bragstad 09 Apr '21

09 Apr '21

Hey folks, As I'm sure some of the cinder folks are aware, I'm updating cinder policies to include support for some default personas keystone ships with. Some of those personas use system-scope (e.g., system-reader and system-admin) and I've already proposed a series of patches that describe what those changes look like from a policy perspective [0]. The question now is how we test those changes. To help guide that decision, I worked on three different testing approaches. The first was to continue testing policy using unit tests in cinder with mocked context objects. The second was to use DDT with keystonemiddleware mocked to remove a dependency on keystone. The third also used DDT, but included changes to update NoAuthMiddleware so that it wasn't as opinionated about authentication or authorization. I brought each approach in the cinder meeting this week where we discussed a fourth approach, doing everything in tempest. I summarized all of this in an etherpad [1] Up to yesterday morning, the only approach I hadn't tinkered with manually was tempest. I spent some time today figuring that out, resulting in a patch to cinderlib [2] to enable a protection test job, and cinder_tempest_plugin [3] that adds the plumbing and some example tests. In the process of implementing support for tempest testing, I noticed that service catalogs for system-scoped tokens don't contain cinder endpoints [4]. This is because the cinder endpoint contains endpoint templating in the URL [5], which keystone will substitute with the project ID of the token, if and only if the catalog is built for a project-scoped token. System and domain-scoped tokens do not have a reasonable project ID to use in this case, so the templating is skipped, resulting in a cinder service in the catalog without endpoints [6]. This cascades in the client, specifically tempest's volume client, because it can't find a suitable endpoint for request to the volume service [7]. Initially, my testing approaches were to provide examples for cinder developers to assess the viability of each approach before committing to a protection testing strategy. But, the tempest approach highlighted a larger issue for how we integrate system-scope support into cinder because of the assumption there will always be a project ID in the path (for the majority of the cinder API). I can think of two ways to approach the problem, but I'm hoping others have more. First, we remove project IDs from cinder's API path. This would be similar to how nova (and I assume other services) moved away from project-specific URLs (e.g., /v3/%{project_id}s/volumes would become /v3/volumes). This would obviously require refactoring to remove any assumptions cinder has about project IDs being supplied on the request path. But, this would force all authorization information to come from the context object. Once a deployer removes the endpoint URL templating, the endpoints will populate in the cinder entry of the service catalog. Brian's been helping me understand this and we're unsure if this is something we could even do with a microversion. I think nova did it moving from /v2/ to /v2.0/, which was technically classified as a major bump? This feels like a moon shot. Second, we update cinder's clients, including tempest, to put the project ID on the URL. After we update the clients to append the project ID for cinder endpoints, we should be able to remove the URL templating in keystone, allowing cinder endpoints to appear in system-scoped service catalogs (just like the first approach). Clients can use the base URL from the catalog and append the admin project ID before putting the request on the wire. Even though the request has a project ID in the path, cinder would ignore it for system-specific APIs. This is already true for users with an admin role on a project because cinder will allow you to get volumes in one project if you have a token scoped to another with the admin role [8]. One potential side-effect is that cinder clients would need *a* project ID to build a request, potentially requiring another roundtrip to keystone. Thoughts? [0] https://review.opendev.org/q/project:openstack/cinder+topic:secure-rbac [1] https://etherpad.opendev.org/p/cinder-secure-rbac-protection-testing [2] https://review.opendev.org/c/openstack/cinderlib/+/772770 [3] https://review.opendev.org/c/openstack/cinder-tempest-plugin/+/772915 [4] http://paste.openstack.org/show/802117/ [5] http://paste.openstack.org/show/802097/ [6] https://opendev.org/openstack/keystone/src/commit/c239cc66615b41a0c09e031b3… [7] http://paste.openstack.org/show/802092/ [8] http://paste.openstack.org/show/802118/

4 8

[cinder] Review of tiny patch to add Ceph RBD fast-diff to cinder-backup
by Christian Rohmann 07 Apr '21

07 Apr '21

Hey everyone, I wrote a tiny patch to add the Ceph RDB feature of fast-diff to backups created by cinder-backup: * https://review.opendev.org/c/openstack/cinder/+/766856/ Could someone please take a peek and let me know of this is sufficient to be merged? Thanks and with kind regards, Christian

3 12

[all] Gate resources and performance
by Dan Smith 06 Apr '21

06 Apr '21

Hi all, I have become increasingly concerned with CI performance lately, and have been raising those concerns with various people. Most specifically, I'm worried about our turnaround time or "time to get a result", which has been creeping up lately. Right after the beginning of the year, we had a really bad week where the turnaround time was well over 24 hours. That means if you submit a patch on Tuesday afternoon, you might not get a test result until Thursday. That is, IMHO, a real problem and massively hurts our ability to quickly merge priority fixes as well as just general velocity and morale. If people won't review my code until they see a +1 from Zuul, and that is two days after I submitted it, that's bad. Things have gotten a little better since that week, due in part to getting past a rush of new year submissions (we think) and also due to some job trimming in various places (thanks Neutron!). However, things are still not great. Being in almost the last timezone of the day, the queue is usually so full when I wake up that it's quite often I don't get to see a result before I stop working that day. I would like to ask that projects review their jobs for places where they can cut out redundancy, as well as turn their eyes towards optimizations that can be made. I've been looking at both Nova and Glance jobs and have found some things I think we can do less of. I also wanted to get an idea of who is "using too much" in the way of resources, so I've been working on trying to characterize the weight of the jobs we run for a project, based on the number of worker nodes required to run all the jobs, as well as the wall clock time of how long we tie those up. The results are interesting, I think, and may help us to identify where we see some gains. The idea here is to figure out[1] how many "node hours" it takes to run all the normal jobs on a Nova patch compared to, say, a Neutron one. If the jobs were totally serialized, this is the number of hours a single computer (of the size of a CI worker) would take to do all that work. If the number is 24 hours, that means a single computer could only check *one* patch in a day, running around the clock. I chose the top five projects in terms of usage[2] to report here, as they represent 70% of the total amount of resources consumed. The next five only add up to 13%, so the "top five" seems like a good target group. Here are the results, in order of total consumption: Project % of total Node Hours Nodes ------------------------------------------ 1. TripleO 38% 31 hours 20 2. Neutron 13% 38 hours 32 3. Nova 9% 21 hours 25 4. Kolla 5% 12 hours 18 5. OSA 5% 22 hours 17 What that means is that a single computer (of the size of a CI worker) couldn't even process the jobs required to run on a single patch for Neutron or TripleO in a 24-hour period. Now, we have lots of workers in the gate, of course, but there is also other potential overhead involved in that parallelism, like waiting for nodes to be available for dependent jobs. And of course, we'd like to be able to check more than patch per day. Most projects have smaller gate job sets than check, but assuming they are equivalent, a Neutron patch from submission to commit would undergo 76 hours of testing, not including revisions and not including rechecks. That's an enormous amount of time and resource for a single patch! Now, obviously nobody wants to run fewer tests on patches before they land, and I'm not really suggesting that we take that approach necessarily. However, I think there are probably a lot of places that we can cut down the amount of *work* we do. Some ways to do this are: 1. Evaluate whether or not you need to run all of tempest on two configurations of a devstack on each patch. Maybe having a stripped-down tempest (like just smoke) to run on unique configs, or even specific tests. 2. Revisit your "irrelevant_files" lists to see where you might be able to avoid running heavy jobs on patches that only touch something small. 3. Consider moving some jobs to the experimental queue and run them on-demand for patches that touch particular subsystems or affect particular configurations. 4. Consider some periodic testing for things that maybe don't need to run on every single patch. 5. Re-examine tests that take a long time to run to see if something can be done to make them more efficient. 6. Consider performance improvements in the actual server projects, which also benefits the users. If you're a project that is not in the top ten then your job configuration probably doesn't matter that much, since your usage is dwarfed by the heavy projects. If the heavy projects would consider making changes to decrease their workload, even small gains have the ability to multiply into noticeable improvement. The higher you are on the above list, the more impact a small change will have on the overall picture. Also, thanks to Neutron and TripleO, both of which have already addressed this in some respect, and have other changes on the horizon. Thanks for listening! --Dan 1: https://gist.github.com/kk7ds/5edbfacb2a341bb18df8f8f32d01b37c 2; http://paste.openstack.org/show/C4pwUpdgwUDrpW6V6vnC/

12 36

[ironic] Review Jams
by Julia Kreger 01 Apr '21

01 Apr '21

In the Ironic team's recent mid-cycle call, we discussed the need to return to occasionally having review jams in order to help streamline the review process. In other words, get eyes on a change in parallel and be able to discuss the change. The goal is to help get people on the same page in terms of what and why. Be on hand to answer questions or back-fill context. This is to hopefully avoid the more iterative back and forth nature of code review, which can draw out a long chain of patches. As always, the goal is not perfection, but forward movement especially for complex changes. We've established two time windows that will hopefully not to be too hard for some contributors to make it to. It doesn't need to be everyone, but it would help for at least some people whom actively review or want to actively participate in reviewing, or whom are even interested in a feature to join us for our meeting. I've added an entry on to our wiki page to cover this, with the current agenda and anticipated review jam topic schedule. The tl;dr is we will use meetpad[1] and meet on Mondays at 2 PM UTC and Tuesdays at 6 PM UTC. The hope is to to enable some overlap of reviewers. If people are interested in other times, please bring this up in the weekly meeting or on the mailing list. I'm not sending out calendar invites for this. Yet. :) See everyone next week! -Julia [0]: https://wiki.openstack.org/wiki/Meetings/Ironic#Review_Jams [1]: https://meetpad.opendev.org/ironic

3 2

Ospurge or "project purge" - What's the right approach to cleanup projects prior to deletion
by Christian Rohmann 28 Mar '21

28 Mar '21

Hello Openstack-Discuss, I was wondering what the right approach to clean up all resources of a project was in order for it to be deleted? 1) There is ospurge (https://opendev.org/x/ospurge) which works, but seems kind of abandoned looking at the last commits and pending issues (https://bugs.launchpad.net/ospurge) Will there still be any further development of this tool? 2) Then there is the project purge command (https://docs.openstack.org/python-openstackclient/victoria/cli/command-obje…) introduced with the Pike release (https://docs.openstack.org/releasenotes/python-openstackclient/pike.html#re… // https://bugs.launchpad.net/python-openstackclient/+bug/1584596 // https://review.opendev.org/c/openstack/python-openstackclient/+/367673/) While it seems only natural to have the cleanup / purge functionality built into the openstack client, I was wondering .. . a) if all potentially existing resources types are covered and this can fully replace ospurge to allow any project to be cleaned up and deleted? What about i.e. Networks, Containers or objects? b) Also ospurge seems to still have some extended options to target or exclude certain resources by using the following options: > [--resource > {Backups,Snapshots,Volumes,Zones,Images,Stacks,FloatingIPs,RouterInterfaces,Routers,Ports,Networks,SecurityGroups,Servers,LoadBalancers,Receivers,Policies,Clusters,Profiles,Objects,Containers}] > [--exclude-resource > {Backups,Snapshots,Volumes,Zones,Images,Stacks,FloatingIPs,RouterInterfaces,Routers,Ports,Networks,SecurityGroups,Servers,LoadBalancers,Receivers,Policies,Clusters,Profiles,Objects,Containers}] those options are not (yet) available for the "project purge" command of the openstack client. With regards, Christian

5 13

Cannot specify host in availability zone
by Mauricio Tavares 26 Mar '21

26 Mar '21

Easy peasy question: According to https://docs.openstack.org/nova/rocky/admin/availability-zones.html, I can specify the host I want to use by following the format --availability-zone ZONE:HOST So, let's get the hostnames for the compute nodes. [raub@test-hn ~(keystone_admin)]$ openstack compute service list --service nova-compute +----+--------------+-----------------------+------+---------+-------+----------------------------+ | ID | Binary | Host | Zone | Status | State | Updated At | +----+--------------+-----------------------+------+---------+-------+----------------------------+ | 11 | nova-compute | compute02.example.com | nova | enabled | up | 2021-02-03T17:25:53.000000 | | 12 | nova-compute | compute03.example.com | nova | enabled | up | 2021-02-03T17:25:53.000000 | | 13 | nova-compute | compute01.example.com | nova | enabled | up | 2021-02-03T17:25:52.000000 | +----+--------------+-----------------------+------+---------+-------+----------------------------+ [raub@test-hn ~(keystone_admin)]$ I want to use compute01.example.com, which I can resolve to 10.1.1.11. But, when I try to create server with (running as admin): openstack server create \ --image default_centos_8 \ --flavor m1.small \ --key-name raubkey \ --availability-zone nova:compute01.example.com \ --nic net-id=LONG_BORING-ID \ raub-netest I get the error message (from openstack server show raub-netest|grep fault): 'message': 'No valid host was found. No such host - host: compute01.example.com node: None ' What am I doing wrong here?

3 4

[kolla] Plan to deprecate and finally drop the chrony container
by Radosław Piliszek 24 Mar '21

24 Mar '21

Hello Fellow OpenStackers interested in Kolla's way. The topic should be pretty self-explanatory but let me provide the details and background. We are currently working on the Wallaby release and, since we are cycle-trailing, it is the right moment for us to reflect upon the various cleanup plans we had (and have). One of those is the drop of the chrony container. Chrony serves the time synchronization purpose which is required for healthy operations (I hope I don't need to explain this point further, time sync is essential for most services nowadays). It is still deployed by default by Kolla Ansible. The point is, most default (even minimal ones) host OS installations come with some form of NTP client, be it chrony, ntpd, timesyncd or whatever else there is. :-) This applies also to provisioning solutions like MAAS or Foreman. And Kolla Ansible actually stands on its head to detect and disable those to avoid multiple time sync daemons hell as it may disrupt normal operations (mostly due to having different time sources but also due to different compensation algorithms [or rather just their actual configuration] and the fact that each tool assumes to be the only source of time changes). We seem to have placed a relatively sane precheck to detect this but effective disabling may prove tricky, especially since it is very easy to get it installed at any point. The NTP client is considered a very basic service these days. It also seems that several users known to us do not use the chrony container and instead orchestrate timesync elsewhere. Hence, our current plan is to: 1) Deprecate the chrony container in the Wallaby cycle. - in Kolla Ansible this would mean also warning users that they use it and defaulting to not using it (with docs and a reno); docs would suggest an Ansible way to coordinate timesync - in Kolla docs and a reno 2) Drop the chrony container from both the places I know Kayobe (the "highest-level" member of the Kolla project) is planning to incorporate timesync handling by external Ansible role means so their users should be covered. Please let us know if you have any comments on the plan above. Or generally any suggestions you would like us to hear. Cheers! -yoctozepto

1 1

[all][tc] Dropping lower-constraints testing from all projects
by Ghanshyam Mann 19 Mar '21

19 Mar '21

Hello Everyone, You might have seen the discussion around dropping the lower constraints testing as it becomes more challenging than the current value of doing it. Few of the ML thread around this discussion: - http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019521… - http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019390… As Oslo and many other project dropping or already dropped it, we should decide it for all other projects also otherwise it can be more changing than it is currently. We have not defined it in PTI or testing runtime so it is always up to projects if they still want to keep it but we should decide a general recommendation here. -gmann

12 46

[ironic] [infra] Making Glean work with IPA for static IP assignment
by Dmitry Tantsur 18 Mar '21

18 Mar '21

Hi Ian, Given our timezone difference, I've decided to send you an email, adding openstack-discuss in CC for greater exposure. We're trying to make IPA (our agent ramdisk) to work without relying on DHCP for cases like Edge deployments. We've settled on the network_data.json format for the API side and wanted to use Glean on the ramdisk to apply it. You can read more details in [1]. The problem is, I cannot make Glean work with any ramdisk I build. The crux of the problem seems to be that NetworkManager (used by default in RHEL, CentOS, Fedora and Debian at least) starts very early, creates the default connection and ignores whatever files Glean happens to write afterwards. On Debian running `systemctl restart networking` actually helped to pick the new configuration, but I'm not sure we want to do that in Glean. I haven't been able to make NetworkManager pick up the changes on RH systems so far. I build ramdisks using IPA-builder [2] by adding the simple-init element. I've tried removing dhcp-all-interfaces (which we depend on by default) to no effect. I've tried disabling the DHCP server, ended up with no IP connectivity at all. I haven't tried to shutdown and restart a connection as recommended in [3] since it's not trivial to do via SSH. Do you maybe have any hints how to proceed? I'd be curious to know how static IP assignment works in the infra setup. Do you have images with NetworkManager there? Do you use the simple-init element? Any help is very appreciated. Dmitry [1] https://specs.openstack.org/openstack/ironic-specs/specs/not-implemented/L3… [2] https://opendev.org/openstack/ironic-python-agent-builder [3] https://mail.gnome.org/archives/networkmanager-list/2014-January/msg00032.h… -- Red Hat GmbH, https://de.redhat.com/ , Registered seat: Grasbrunn, Commercial register: Amtsgericht Muenchen, HRB 153243, Managing Directors: Charles Cachera, Brian Klemm, Laurie Krebs, Michael O'Neill

4 9

[PTLs][release] Wallaby Cycle Highlights
by Kendall Nelson 15 Mar '21

15 Mar '21

Hello Everyone! It's time to start thinking about calling out 'cycle-highlights' in your deliverables! I have no idea how we are here AGAIN ALREADY, alas, here we be. As PTLs, you probably get many pings towards the end of every release cycle by various parties (marketing, management, journalists, etc) asking for highlights of what is new and what significant changes are coming in the new release. By putting them all in the same place it makes them easy to reference because they get compiled into a pretty website like this from the last few releases: Stein[1], Train[2]. We don't need a fully fledged marketing message, just a few highlights (3-4 ideally), from each project team. Looking through your release notes might be a good place to start. *The deadline for cycle highlights is the end of the R-5 week [3] (next week) on March 12th.* How To Reminder: ------------------------- Simply add them to the deliverables/$RELEASE/$PROJECT.yaml in the openstack/releases repo like this: cycle-highlights: - Introduced new service to use unused host to mine bitcoin. The formatting options for this tag are the same as what you are probably used to with Reno release notes. Also, you can check on the formatting of the output by either running locally: tox -e docs And then checking the resulting doc/build/html/$RELEASE/highlights.html file or the output of the build-openstack-sphinx-docs job under html/$RELEASE/highlights.html. Feel free to add me as a reviewer on your patches. Can't wait to see you all have accomplished this release! Thanks :) -Kendall Nelson (diablo_rojo) [1] https://releases.openstack.org/stein/highlights.html [2] https://releases.openstack.org/train/highlights.html [3] htt <https://releases.openstack.org/train/schedule.html#t-cycle-highlights> https://releases.openstack.org/wallaby/schedule.html <https://releases.openstack.org/ussuri/schedule.html>

2 6

[all][tc] Thoughts on Python 3.7 support
by Pierre Riteau 11 Mar '21

11 Mar '21

Hello, There have been many patches submitted to drop the Python 3.7 classifier from setup.cfg: https://review.opendev.org/q/%2522remove+py37%2522 The justification is that Wallaby tested runtimes only include 3.6 and 3.8. Most projects are merging these patches, but I've seen a couple of objections from ironic and horizon: - https://review.opendev.org/c/openstack/python-ironicclient/+/769044 - https://review.opendev.org/c/openstack/horizon/+/769237 What are the thoughts of the TC and of the overall community on this? Should we really drop these classifiers when there are no corresponding CI jobs, even though more Python versions may well be supported? Best wishes, Pierre Riteau (priteau)

9 13

[horizon][i18n][infra] Renaming Chinese locales in Django from zh-cn/zh-tw to zh-hans/zh-hant
by Akihiro Motoki 07 Mar '21

07 Mar '21

Hi, The horizon team is planning to switch Chinese language codes in Django codes from zh-cn/zh-tw to zh-hans/zh-hant. Django, a framework used in horizon, recommends to use them since more than 5 years ago [1][2]. This change touches Chinese locales in the dashbaord codes of horizon and its plugins only. It does not change Chinese locales in other translations like documentations and non-Django python codes. This is to minimize the impact to other translations and the translation platform. ### What are/are not changed in repositories * horizon and horizon plugins * locales in the dashboard codes are renamed from zh-cn/zh-tw to zh-hans/zh-hant * locales in doc/ and releasenotes/ are not changed * other repositories * no locale change happens NOTE: * This leads to a situation that we have two different locales in horizon and plugin repositories (zh-hans/hant in the code folders and zh-cn/tw in doc and releasenotes folders), but it affects only developers and does not affect horizon consumers (operators/users) and translators. * In addition, documentations are translated in OpenStack-wide (not only in horizon and plugins). By keeping locales in docs, locales in documentation translations will be consistent. ### Impact on Zanata In Zanata (the translation platform), zh-cn/zh-tw continue to be used, so no change is visible to translators. The infra job proposes zh-cn/zh-tw GUI translatoins as zh-hans/zh-hant translations to horizon and plugin repositories. NOTE: The alternative is to create the corresponding language teams (zh-hans/zh-hant) in Zanata, but it affects Chinese translators a lot. They need to join two language teams to translate horizon (zh-hans/zh-hant) and docs (zh-cn/zh-tw). It makes translator workflow complicated. The proposed way has no impact on translators and they can continue the current translation process and translate both horizon and docs under a single language code. ### Changes in the infra scripts Converting Chinese locales of dashboard translations from zh-cn/zh-tw to zh-hans/zh-hant is handled by the periodic translation job. propose_translation_update job is responsible for this. [propose_translation_update.sh] * Move zh-cn/zh-tw translations related to Django codes in horizon and its plugins from zanata to zh-hans/hant directory. * This should happen in the master branch (+ future stable branhces such as stable/wallaby). ### Additional Remarks I18n SIG respects all language team coordinators & members, and is looking forward to seeing discussions and/or active contributions from the language teams. Currently all language codes follow the ISO 639-1 standard (language codes with relevant country codes), but the change introduces new language code forms like zh-hans/zh-hant. This follows IETF BCP 47 which recommends a combination of language codes and ISO 15924 script code (four letters). We now have two different language codes in OpenStack world. This is just to minimize the impact on the existing translations. It is not ideal. We are open for further discussion on language codes and translation support. ### References [1] https://code.djangoproject.com/ticket/18419 [2] https://www.djbook.ru/rel1.7/releases/1.7.html#language-codes-zh-cn-zh-tw-a… Thanks, Akihiro Motoki (irc: amotoki)

1 1

Puppet openstack modules
by Bessghaier, Narjes 03 Mar '21

03 Mar '21

Dear OpenStack team, My name is Narjes and I'm a PhD student at the University of Montréal, Canada. My current work consists of analyzing code reviews on the puppet modules. I would like to precisely know what the ruby files are used for in the puppet modules. As mentioned in the official website, most of unit test are written in ruby. Are ruby files destined to carry out units tests or destined for production code. I appreciate your help, Thank you

3 4

Re: [openstack-dev] Are we ready to put stable/ocata into extended maintenance mode?
by Alex Schultz 03 Mar '21

03 Mar '21

On Tue, Sep 18, 2018 at 1:30 PM Alex Schultz <aschultz(a)redhat.com> wrote: > > On Tue, Sep 18, 2018 at 1:27 PM, Matt Riedemann <mriedemos(a)gmail.com> wrote: > > The release page says Ocata is planned to go into extended maintenance mode > > on Aug 27 [1]. There really isn't much to this except it means we don't do > > releases for Ocata anymore [2]. There is a caveat that project teams that do > > not wish to maintain stable/ocata after this point can immediately end of > > life the branch for their project [3]. We can still run CI using tags, e.g. > > if keystone goes ocata-eol, devstack on stable/ocata can still continue to > > install from stable/ocata for nova and the ocata-eol tag for keystone. > > Having said that, if there is no undue burden on the project team keeping > > the lights on for stable/ocata, I would recommend not tagging the > > stable/ocata branch end of life at this point. > > > > So, questions that need answering are: > > > > 1. Should we cut a final release for projects with stable/ocata branches > > before going into extended maintenance mode? I tend to think "yes" to flush > > the queue of backports. In fact, [3] doesn't mention it, but the resolution > > said we'd tag the branch [4] to indicate it has entered the EM phase. > > > > 2. Are there any projects that would want to skip EM and go directly to EOL > > (yes this feels like a Monopoly question)? > > > > I believe TripleO would like to EOL instead of EM for Ocata as > indicated by the thead > http://lists.openstack.org/pipermail/openstack-dev/2018-September/134671.ht… > Bringing this backup to see what we need to do to get the stable/ocata branches ended for the TripleO projects. I'm bringing this up because we have https://review.openstack.org/#/c/647009/ which is for the upcoming rename but CI is broken and we have no interest in continue to keep the stable/ocata branches alive (or fix ci for them). Thanks, -Alex > Thanks, > -Alex > > > [1] https://releases.openstack.org/ > > [2] > > https://docs.openstack.org/project-team-guide/stable-branches.html#maintena… > > [3] > > https://docs.openstack.org/project-team-guide/stable-branches.html#extended… > > [4] > > https://governance.openstack.org/tc/resolutions/20180301-stable-branch-eol.… > > > > -- > > > > Thanks, > > > > Matt > > > > __________________________________________________________________________ > > OpenStack Development Mailing List (not for usage questions) > > Unsubscribe: OpenStack-dev-request@lists.openstack.org?subject:unsubscribe > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

5 11

[SIG][Containers][k8s] Merge? Retire?
by Kendall Nelson 01 Mar '21

01 Mar '21

Hello! As you might have noticed, we've been working on getting the sig governance site updated with current chairs, sig statuses. etc. Two SIGs that are in need of updates still. The k8s SIG's listed chairs have all moved on. The container SIG is still listed as forming. While not the exact same goal/topic, perhaps these can be merged? And if so, do we have any volunteers for chairs? The other option is to simply remove the Container SIG as its not completely formed at this point and retire the k8s SIG. Thoughts? Volunteers? -Kendall (diablo_rojo)

2 2

VIP switch causing connections that refuse to die
by Michal Arbet 01 Mar '21

01 Mar '21

Hi, I found that keepalived VIP switch cause TCP connections that refuse to die on host where VIP was before it was switched. I filled a bug here -> https://bugs.launchpad.net/kolla-ansible/+bug/1917068 Fixed here -> https://review.opendev.org/c/openstack/kolla-ansible/+/777772 Video presentation of bug here -> https://download.kevko.ultimum.cloud/video_debug.mp4 I was just curious and wanted to ask here in openstack-discuss : If someone already seen this issue in past ? If yes, do you tweak net.ipv4.tcp_retries2 kernel parameter ? If no, how did you solve this ? Thank you, Michal Arbet ( kevko )

4 5

[puppet-openstack] stop using the ${pyvers} variable
by Thomas Goirand 01 Mar '21

01 Mar '21

Hi, Using the ${pyvers} so we can switch be between Python versions made sense 1 or 2 years ago. However, I'm in the opinion that we should stop using that, and switch to using python3 everywhere directly whenever possible. Though Tobias seems to not agree (see [1]), so I'm raising the topic in the list so we can discuss this together. Your thoughts? Cheers, Thomas Goirand (zigo) [1] https://review.opendev.org/c/openstack/puppet-swift/+/777564

5 10

[TripleO] Moving stable/rocky for *-tripleo-* repos to End of Life OK?
by Marios Andreou 01 Mar '21

01 Mar '21

Hello all, it's been ~ 2 months now since my initial mail about $subject [1] and just under a month since my last bump on the thread [2] and I haven't heard any objections so far. So I think it's now appropriate to move forward with [3] which tags the latest commits to the stable/rocky branch of all tripleo-repos [4] as 'rock-eol' (except archived things like instack/tripleo-ui). Once it merges we will no longer be able to land anything into stable/rocky for all tripleo repos and the stable/rocky branch will be deleted. So, last chance! If you object please go and -1 the patch at [3] and/or reply here thanks, marios [1] http://lists.openstack.org/pipermail/openstack-discuss/2020-December/019338… [2] http://lists.openstack.org/pipermail/openstack-discuss/2021-January/019860.… [3] https://review.opendev.org/c/openstack/releases/+/774244 [4] https://releases.openstack.org/teams/tripleo.html

2 4

Moving ara code review to GitHub
by David Moreau Simard 01 Mar '21

01 Mar '21

Hi openstack-discuss, long time no see o/ I've long dreaded doing this and sending this email out because I know how the community feels about proprietary platforms and I value the four opens that the OpenStack community has taught me so much about. I've recently reached out and asked if people would be more likely to contribute to ara if pull requests were possible [1] and had a number of potential contributors interested. Don't get me wrong: I still like OpenStack (have a cloud in my basement!) and personally prefer the Gerrit change workflow to the one on GitHub. However, I've come to the conclusion that my personal preferences should not be a barrier to contribution and so for the health and sustainability of the project I'll move the code review for ara to GitHub leveraging Ansible's Zuul deployment [2] for CI. The truth is that ara never had many contributors and the few that were interested were often discouraged by the process involved in signing up and sending a change through Gerrit. It broke my heart to see a pull request being automatically closed with a template by an OpenStack bot. It broke my heart to have to tell people that they must jump through several hoops to send a patch. I was forever grateful every single time that someone actually went through the process and managed to get a patch merged with or without my help. For more than five years already, I've done my best to salvage these contributions and ask for help but at the end of the day, most of the Ansible community projects are on GitHub and it has weighed down on me heavily to battle this inertia. Frankly, it has been exhausting and even depressing sometimes. I'm thankful for the OpenStack (and OpenDev) communities for hosting the project until now and hope to continue talking to you on freenode -- you can find me in #ara amongst many other channels. See you around ! [1]: https://github.com/ansible-community/ara/issues/205 [2]: https://dashboard.zuul.ansible.com/t/ansible/status David Moreau Simard dmsimard = [irc, github, twitter]

4 3

Neutron DVR Public IP usage
by Satish Patel 28 Feb '21

28 Feb '21

Folks, Many years ago I deployed DVR (distributed virtual router) with packstack and found it required public IPs on each computes node + SNAT IPs, now the question is if i have 300 compute nodes then how do i deploy DVR with /24 public subnet which i have. If my cloud computes are going to eat up my all public IP then who is going to deploy DVR? In short, DVR is a bad idea for public clouds until IPv6 takes over the world, am I missing something?

3 2

Need core reviewers for sqlalchemy-migrate
by Thomas Goirand 28 Feb '21

28 Feb '21

Hi, Left, there's only myself and Monty as core reviewers. I don't have the skills, or time for this. The only reason I'm a core reviewer, is that historically, I was the one pointing out it got unmaintained, back a long time ago (many years from now). So it'd be nice of some people could step up and become core reviewer of SQLA-migrate please. Cheers, Thomas Goirand (zigo)

10 16

Is it possible to support multiple instances_path?
by QingFeng Hao 26 Feb '21

26 Feb '21

Hello Everyone, This is QingFeng from IBM, I have used openstack for years, now I did some investigation and noticed that instances_path in nova.conf in compute host can only specify one path to store the instances. The question is, is it possible to support multipath instances_path for different projects (tenants)? For example, instances_path = path1, path2, and path1 for project1, path2 for project2, with this way, we can achieve the isolation and different storages of different purposes for different projects. This could be valuable in some situations. So I am curious if there is any plan to do it so that I can leverage and don't have to implement it by myself. :-) Thanks a lot! Best regards QingFeng Hao

1 1

How to configure interfaces in CentOS 8.3 for OSA installation?
by Amey Abhyankar 26 Feb '21

26 Feb '21

Hello, I am trying to install OpenStack by referring following guides = 1) https://docs.openstack.org/project-deploy-guide/openstack-ansible/latest/de… 2) https://docs.openstack.org/openstack-ansible/victoria/user/test/example.html In link number 2, there is a step to configure interfaces. In CentOS 8 we don't have a /etc/network/interfaces file. Which interface file should I configure? Or do I need to create all virtual int's manually using nmcli? Pls suggest thanks. Regards, Amey.

6 26

[cinder] cinder-tempest-plugin-lvm-lio-barbican failures
by Brian Rosmaita 26 Feb '21

26 Feb '21

The backup tests in the cinder-tempest-plugin-lvm-lio-barbican job have been failing for the past 24 hours or so. Luigi has a patch up that we think will fix this: https://review.opendev.org/c/openstack/cinder-tempest-plugin/+/777685 Until that merges, there's no point in rechecking cinder-tempest-plugin-lvm-lio-barbican failures. cheers, brian

3 5

[manila] Wallaby Collab Review next Wednesday (Mar 3rd)
by Douglas 26 Feb '21

26 Feb '21

Hi all Next Wednesday, March 3rd, we'll have a Manila collaborative review session where we'll go through the code and review the following proposed feature: - Security Service Updates for In Use Share Networks[1][2]. This meeting is scheduled for two hours, starting at 5:00PM UTC. Meeting notes and videoconference links will be available here[3]. Feel free to attend if you are interested and available. Hoping to see you there, - dviroel [1] https://opendev.org/openstack/manila-specs/src/branch/master/specs/wallaby/… [2] https://review.opendev.org/q/topic:%22bp%252Fadd-security-service-in-use-sh… [3] https://etherpad.opendev.org/p/security-service-update-collab-review -- Douglas Salles Viroel

1 0

Broken Security Link on Website and general bad discoverability of security related information
by Sven Kieske 26 Feb '21

26 Feb '21

Hi, I just noticed, while researching information regarding these two CVEs: https://nvd.nist.gov/vuln/detail/CVE-2021-3177 https://nvd.nist.gov/vuln/detail/CVE-2021-23336 That the Link to the Security Contacts on the Website is broken: https://www.openstack.org/openstack-security/ is a 404 for me. I found the dead link here: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-announce Another "Bug" imho is, that there is no information how to contact the security team on the main website, and the search for "security" does not really yield good results how to contact the security team either. If someone has any information on these vulnerabilities and how they affect openstack I'd be delighted to hear from you. a cursory search of gerrit didn't yield anything. If I search the website using the integrated search for the CVE the top result is some 2021 Board Election.. RedHat and Suse both state that their distributions of openstack are affected: https://access.redhat.com/security/cve/cve-2021-23336 https://www.suse.com/security/cve/CVE-2021-23336/ So I guess the base distro is also affected, as these are core openstack components imho? Thanks for you time. -- Mit freundlichen Grüßen / Regards Sven Kieske Systementwickler Mittwald CM Service GmbH & Co. KG Königsberger Straße 4-6 32339 Espelkamp Tel.: 05772 / 293-900 Fax: 05772 / 293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer, Florian Jürgens St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen Informationen zur Datenverarbeitung im Rahmen unserer Geschäftstätigkeit gemäß Art. 13-14 DSGVO sind unter www.mittwald.de/ds abrufbar.

3 4

QoS in Openstack
by open infra 26 Feb '21

26 Feb '21

Hi, I can see the following extensions available. http://paste.openstack.org/show/803034/ Is there a document I can understand more about each extension? Can we manage QoS via GUI? Regards, Danishka

3 2

[infra][kolla] Kayobe CI failing on vexxhost
by Mark Goddard 26 Feb '21

26 Feb '21

Hi, Some of the Kayobe CI jobs are failing when run on the vexxhost cloud. The particular part that fails is when testing 'bare metal' deployment using libvirt/qemu VMs. As far as I can tell, the test passes fairly reliably on other clouds, and fails reliably on vexxhost. Does anyone have any suggestion as to what might be causing this? priteau suggested entropy could be an issue, but we have not investigated yet. Is there any way to block a particular cloud provider for certain CI jobs until this is resolved? Thanks, Mark

3 8

[nova][octavia][kolla][openstack-ansible] failed to create loadbalancer on Centos8 system
by Bartosz Bezak 25 Feb '21

25 Feb '21

Hi, I have noticed that this problem occurs while attaching second NIC while using qemu-kvm-5.1.0-14.el8.1.x86_64 and 1 vcpu instances. Downgrading to qemu-kvm-4.2.0-29.el8.3.x86_64 or changing flavour to 2 vcpu fixes problem. Failing ubuntu guests that I tested - bionic, focal, groovy and hirsute from https://cloud-images.ubuntu.com <https://cloud-images.ubuntu.com/>. Centos8 cloud image guests works fine though. I’ve raised bug to nova - https://bugs.launchpad.net/nova/+bug/1916879 04.02.2021, 12:40, "Jonathan Rosser" <jonathan.rosser at rd.bbc.co.uk <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss>>: > I'm seeing very similar errors on patches we are trying to merge in openstack-ansible. Same sort of trouble with Centos breaking and Ubuntu working. References to logs with errors like yours are in the comments on this patch https://review.opendev.org/c/openstack/openstack-ansible-os_octavia/+/768514 <https://review.opendev.org/c/openstack/openstack-ansible-os_octavia/+/768514> > > I was trying to find something specific we are doing wrong on Centos in openstack-ansible deployments but feels like there maybe some common Centos related factor here. > On 04/02/2021 10:11, W Ch wrote: >> Hi: >> >> Recently, we added a CI task[0] for octavia in the kolla project. and we tested octavia based on the ubuntu and centos systems. >> >> The ubuntu system worked as expected but Centos did not work. >> >> I tried to debug it and result is following: >> >> Octavia can not create a load balancer on centos8. because octavia-worker failed to plug a vip port on amphora vm.[1] >> >> 2021-01-31 08:20:12.065 22 ERROR octavia.compute.drivers.nova_driver [-] Error attaching network None with ip None and port 26a39187-e95a-4131-91e7-24289e777f36 to amphora (compute_id: a210ec88-b554-487f-a125-30b5c7473060) : novaclient.exceptions.ClientException: Unknown Error (HTTP 504) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs [-] Error plugging amphora (compute_id: a210ec88-b554-487f-a125-30b5c7473060) into port 26a39187-e95a-4131-91e7-24289e777f36.: octavia.common.exceptions.ComputeUnknownException: Unknown exception from the compute driver: Unknown Error (HTTP 504). >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs Traceback (most recent call last): >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/octavia/compute/drivers/nova_driver.py", line 318, in attach_network_or_port >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs port_id=port_id) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/novaclient/api_versions.py", line 393, in substitution >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs return methods[-1].func(obj, *args, **kwargs) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/novaclient/v2/servers.py", line 2063, in interface_attach >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs obj_class=NetworkInterface) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/novaclient/base.py", line 363, in _create >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs resp, body = self.api.client.post(url, body=body) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/keystoneauth1/adapter.py", line 401, in post >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs return self.request(url, 'POST', **kwargs) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs File "/var/lib/kolla/venv/lib/python3.6/site-packages/novaclient/client.py", line 78, in request >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs raise exceptions.from_response(resp, body, url, method) >> 2021-01-31 08:20:12.066 22 ERROR octavia.network.drivers.neutron.allowed_address_pairs novaclient.exceptions.ClientException: Unknown Error (HTTP 504) >> >> Octavia-work called Neutron API to create a port. And called nova-api to attach the vip to amphora. >> >> Neutron created port successfully, but nova failed to attach the port to instance.[2] >> >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [req-ab0e8d9b-664b-430f-8006-cad713b0c826 401ba22da5f8427fbda5fce24600041b 8ce8b97f710f43d7af2b8f9b1e0463c8 - default default] [instance: a210ec88-b554-487f-a125-30b5c7473060] attaching network adapter failed.: libvirt.libvirtError: Unable to read from monitor: Connection reset by peer >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] Traceback (most recent call last): >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/nova/virt/libvirt/driver.py", line 2149, in attach_interface >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] guest.attach_device(cfg, persistent=True, live=live) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/nova/virt/libvirt/guest.py", line 304, in attach_device >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] self._domain.attachDeviceFlags(device_xml, flags=flags) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/eventlet/tpool.py", line 190, in doit >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] result = proxy_call(self._autowrap, f, *args, **kwargs) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/eventlet/tpool.py", line 148, in proxy_call >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] rv = execute(f, *args, **kwargs) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/eventlet/tpool.py", line 129, in execute >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] six.reraise(c, e, tb) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/usr/lib/python3.6/site-packages/six.py", line 703, in reraise >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] raise value >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/var/lib/kolla/venv/lib/python3.6/site-packages/eventlet/tpool.py", line 83, in tworker >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] rv = meth(*args, **kwargs) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] File "/usr/lib64/python3.6/site-packages/libvirt.py", line 630, in attachDeviceFlags >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] if ret == -1: raise libvirtError ('virDomainAttachDeviceFlags() failed', dom=self) >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] libvirt.libvirtError: Unable to read from monitor: Connection reset by peer >> 2021-01-31 08:20:23.945 8 ERROR nova.virt.libvirt.driver [instance: a210ec88-b554-487f-a125-30b5c7473060] >> >> Nova-compute called libvirt to attach the device. And libvirt also failed to attach the device[3] >> >> 2021-01-31 08:20:23.884+0000: 86663: error : qemuMonitorIORead:491 : Unable to read from monitor: Connection reset by peer >> 2021-01-31 08:20:23.884+0000: 86663: debug : qemuMonitorIO:618 : Error on monitor Unable to read from monitor: Connection reset by peer >> 2021-01-31 08:20:23.884+0000: 86663: info : virObjectRef:402 : OBJECT_REF: obj=0x7f004c00b610 >> 2021-01-31 08:20:23.884+0000: 86663: debug : qemuMonitorIO:649 : Triggering error callback >> 2021-01-31 08:20:23.884+0000: 86663: debug : qemuProcessHandleMonitorError:346 : Received error on 0x7f004c0095b0 'instance-00000001' >> 2021-01-31 08:20:23.884+0000: 64768: debug : qemuMonitorSend:958 : Send command resulted in error Unable to read from monitor: Connection reset by peer >> >> I also tried to use kolla/ubuntu-source-nova-libvirt instead of kolla/centos-source-nova-libvirt. and it worked as expected. >> >> I think the root cause is that libvirt failed to attach a network device. but i don't know how to resolve this problem. >> >> could anyone help me? >> >> Thanks >> >> Wuchunyang >> >> [0]: https://review.opendev.org/c/openstack/kolla-ansible/+/754285 <https://review.opendev.org/c/openstack/kolla-ansible/+/754285> >> [1]: https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0… <https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0…> >> [2]: https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0… <https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0…> >> [3]: https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0… <https://zuul.opendev.org/t/openstack/build/e4b8c62c44a64b96bc287ba2ba2315f0…> Best regards, Bartosz Bezak

2 2

vscode/codium extension for Ansible users
by Sorin Sbarnea 25 Feb '21

25 Feb '21

If you happen to use vscode or codium and you end-up having to deal with a lot of Ansible content to edit, you may want to try the newer Ansible Language <https://marketplace.visualstudio.com/items?itemName=zbr.vscode-ansible> extension. For the moment it has two major features: - Display violations identified by ansible-lint, ansible own syntax check and yamllint inside problems tab. - Validate Ansible YAML files and provide auto-complete by using Ansible schemas. I am also working on adding schema validation for Zuul config files in the next version, it is bit outside "ansible" realm, but would likely prove useful too. -- /sorin

1 0

[TripleO] next irc meeting Tuesday Mar 02 @ 1400 UTC in #tripleo
by Marios Andreou 25 Feb '21

25 Feb '21

Reminder that the next TripleO irc meeting is: ** Tuesday 02 March at 1400 UTC in #tripleo ** ** https://wiki.openstack.org/wiki/Meetings/TripleO ** ** https://etherpad.opendev.org/p/tripleo-meeting-items ** Please add anything you want to highlight at https://etherpad.opendev.org/p/tripleo-meeting-items This can be recently completed things, ongoing review requests, blocking issues, or anything else tripleo you want to share. Our last meeting was on Feb 16 - you can find the logs there http://eavesdrop.openstack.org/meetings/tripleo/2021/tripleo.2021-02-16-14.… Hope you can make it on Tuesday, thanks, marios

1 0

RE: [kolla] Stack creation fails
by Braden, Albert 25 Feb '21

25 Feb '21

After doing some experiments I realize that this is unrelated to heat. If I manually build 20 volumes, 2 of them will be stuck in "creating" status. (openstack) [abraden@chrnc-dev-os-build-01 kolla_multinode]$ for x in {1..20}; do echo $x; openstack volume create --image 42d2a2db-d741-4080-8e8a-a713696de7c2 --size 50 atest$x;done (openstack) [abraden@chrnc-dev-os-build-01 kolla_multinode]$ ovl|grep atest | 1ab37b22-e06f-4360-83b5-e8272a906746 | atest20 | available | 50 | | | 641e8edf-26c1-4c7c-a02f-a199891adcb2 | atest19 | available | 50 | | | 7687e401-1ea1-4eb7-99d5-232ac33ea6eb | atest18 | available | 50 | | | 64c14f24-69c6-42f2-90ad-60f464c5fd3f | atest17 | available | 50 | | | 0bcd4e8e-4d53-4f74-9d7c-001e6aaeef88 | atest16 | creating | 50 | | | 9748a5ad-7a09-4f2f-9abd-12d69a27ab90 | atest15 | available | 50 | | | 85e84467-eef9-447f-9ba9-2545bef857ef | atest14 | available | 50 | | | c55c17c4-3471-4a06-8cc1-497a7f17ec72 | atest13 | available | 50 | | | 7d43cce3-fc4e-4697-9a8f-ca38226ca6cf | atest12 | available | 50 | | | f5a2062a-f6ee-4475-841e-d2efe5b9d4af | atest11 | available | 50 | | | 2b223e8a-c252-4306-8372-e2642b7fbf33 | atest10 | available | 50 | | | 5ce06f71-0169-4e9c-8133-7b1f826573c4 | atest9 | available | 50 | | | 1b40e297-3c54-4260-a4e7-535e183c8d74 | atest8 | available | 50 | | | e1ce1693-ba65-4f12-a85d-8b54e9259ef5 | atest7 | available | 50 | | | 0e6e5d95-a0c0-4daf-b21e-ebd5c8d6cb69 | atest6 | creating | 50 | | | 520d6912-535f-40e7-9da9-9f717f1eba2b | atest5 | available | 50 | | | 4d970654-e83f-4b6a-9c19-f917c4ec2825 | atest4 | available | 50 | | | ad77c9cd-e7bf-428b-8b01-c847fd818c9c | atest3 | available | 50 | | | c7d34554-467d-4312-9e81-5e8d00dcc7be | atest2 | available | 50 | | | 30ea4cdf-9d1e-471b-822b-1dc81e38ff96 | atest1 | available | 50 | | From: Braden, Albert <C-Albert.Braden(a)charter.com> Sent: Wednesday, February 24, 2021 1:40 PM To: openstack-discuss(a)lists.openstack.org Subject: [EXTERNAL] RE: [heat] [kolla] Stack creation fails CAUTION: The e-mail below is from an external source. Please exercise caution before opening attachments, clicking links, or following guidance. Turns out the failed key occurs when the previous keypair fails to delete with the stack, preventing the new keypair with the same name from being created, and I can fix it by manually deleting that keypair. I'm still looking for answers on [1]. From: Braden, Albert <C-Albert.Braden(a)charter.com<mailto:C-Albert.Braden@charter.com>> Sent: Wednesday, February 24, 2021 1:13 PM To: openstack-discuss(a)lists.openstack.org<mailto:openstack-discuss@lists.openstack.org> Subject: [EXTERNAL] [heat] [kolla] Stack creation fails CAUTION: The e-mail below is from an external source. Please exercise caution before opening attachments, clicking links, or following guidance. I'm using a heat template to try and build an Openstack cluster on VMs and it is failing in 2 different ways. It starts out fine for both: (openstack) [abraden@chrnc-dev-os-build-01 kolla_multinode]$ os stack create -t kolla_multinode.yaml upgrade-stack +---------------------+----------------------------------------------------------------------------------------+ | Field | Value | +---------------------+----------------------------------------------------------------------------------------+ | id | 7b4a49d2-0418-453a-abde-5e510b588b71 | | stack_name | upgrade-stack | | description | Deploy virtualized multi-node OpenStack and Ceph using kolla-ansible and ceph-ansible. | | | | | creation_time | 2021-02-23T21:17:02Z | | updated_time | None | | stack_status | CREATE_IN_PROGRESS | | stack_status_reason | Stack CREATE started | +---------------------+----------------------------------------------------------------------------------------+ Sometimes it stays in CREATE_IN_PROGRESS status for a long time, and when I look at volumes I see one or more volumes stuck in "creating" status [1]. If I set the stuck volumes to "error" status then heat retries and the cluster builds successfully. Other times the keypair fails. First it goes to DELETE_COMPLETE status and then to CREATE_FAILED [2], and the the stack goes to CREATE_FAILED status. When this happens no volumes are created, and I haven't found a workaround for this failure. Where should I be looking for the issue? Nothing in the log is jumping out at me. RMQ and keystone seem fine. Searching for the id of the failed stack or the stuck volume in /var/log/kolla/* doesn't find any errors or warnings. [1] volumes<https://paste.ubuntu.com/p/ZBhn7TQ2Hv/> [2] failed key<https://paste.ubuntu.com/p/gGwDRyT2Nd/> I apologize for the nonsense below. I have not been able to stop it from being attached to my external emails. The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited. The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited. E-MAIL CONFIDENTIALITY NOTICE: The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited.

1 0

[ops][victoria][trove] Problems running Trove
by DHilsbos＠performair.com 25 Feb '21

25 Feb '21

All; I've had a number of issues getting Trove to run for us, though I've worked through most of them (lots of network problems...). I now have the Nova instance starting, and it reaches out to the cluster's RabbitMQ instance. I'm getting these errors logged in /var/log/trove/trove-guestagent.log inside the Nova instance: ERROR trove.guestagent.volume '/dev/vdb' was not formatted.: oslo.concurrency.processutils.ProcessExecutionError: Unexpected error while running command. Command: sudo dumpe2fs /dev/vdb Exit code: 1 Stdout: "Couldn't find valid filesystem superblock.\n" Stderror: 'dumpe2fs: Bad magic number in super-block while trying to open /dev/vdb\n' Farther down, I get this: WARNING trove.guestagent.utils.docker [-] Failed to get container database: docker.errors.NotFound: 404 Client Error: Not Found ("No such container: database") There are a number of similar errors, all indicating that it can't get the Docker files from somewhere. I'm not sure if the first is an actual issue. Wouldn't the current Trove setup expect it's data storage add-on volume to be blank initially? The second suggests that I still have a network issue, most likely routing, as the Nova instance thinks it has 2 routes to the internet, but only one works. Any thoughts would be appreciated. Dominic L. Hilsbos, MBA Director - Information Technology Perform Air International Inc. DHilsbos(a)PerformAir.com www.PerformAir.com

3 5

[ALL] [infra] [QA] RHEL in upstream first party ci. aka RHEL for Open Source Infrastructure
by Sean Mooney 25 Feb '21

25 Feb '21

Hi o/ im not involed with this announcement that happened a few minutes ago but redhat has just annouched RHEL for Open Source Infrastructure https://www.redhat.com/en/blog/extending-no-cost-red-hat-enterprise-linux-o… it is avaiable for all opensouce communities to build infrastucture and and ci systems with. Before the the recent centos stream annoucnments we had discussed the posiblity of useing CentOS 8 in ci more widely in nova but we dropped that idea when teh recent changes happened. at first glance this looks like a program that would allow the first party ci to use RHEL instead of centos for our testing and development so i wanted to start a thread on this before we select our supported runtimes for xena. unfortuntelly there is a throwawy comment at the end of the press release that "We realize this program doesn’t cover situations where open source projects are using Public CI infrastructure provided by third-parties." im not sure if they are referring to things like travis or if it means we cannot build image ourselves and deploy them to vm on third praty clouds which donated infrastructure to the community to use to host the first party ci. that is something that would have to be clarifed with rosi-program(a)redhat.com to confirm but at the very least i wanted to highlihgt this to people so that we can at lest disucss if should/can utilize the program or not to provide rhel images in the first party ci or not. im not actully advocating for swtich jobs to rhel, it might make sense for tripleo or some other projects and it might be nice to have the ablity to run one or two jobs out of a set of jobs for a give porject on multiple operationg systems but thsi is more an attempt to evaluate if this is relevent to our comunity or not. regards sean.

2 1

[neutron] Drivers meeting 26.02.2021
by Slawek Kaplonski 25 Feb '21

25 Feb '21

Hi, We don't have any agenda for tomorrow's drivers meeting. Due to that and additional due to fact that we have recharge day in Red Hat let's cancel that meeting. See You on the meeting next week. Have a great weekend! -- Slawek Kaplonski Principal Software Engineer Red Hat

1 0

[neutron][ipam] how is the first subnet determined by neutron?
by Tony Liu 25 Feb '21

25 Feb '21

Hi, When there are multiple subnets in a provider network, FIP is always allocated from the "first" subnet. What I see is that, the "first" subnet is the subnet added as the first. Or the first subnet from "openstack network show". Is that how subnets ordered, by creation order? Is there any way to change this order by manipulating, like subnets table in DB? I have two subnets, I want to allocate FIP from the second subnet, instead of the first, without clean them up and recreate them. Is that possible? Note, not allocate specific address, but auto allocation. Thanks! Tony

2 1

Security Interface for Ironic Discussion
by Leo McGann 24 Feb '21

24 Feb '21

Hi all, I just wanted to throw out there a discussion we will be having about Ironic and the creation of a new generic security interface and integration with Keylime as a means of node attestation tomorrow at 1pm EST. I have attached a link to the spec we are drafting and a google calendar invite to this email. https://review.opendev.org/c/openstack/ironic-specs/+/576718/20/specs/appro… https://calendar.google.com/event?action=TEMPLATE&tmeid=Nmx0azZqdTFxZ2QycjB… Thanks! Leo

3 5