Open Stack

My nova.conf is this one:

https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_cmpt/templates/mitaka/nova.conf

However, I'm facing connectivity problems when with OpenvSwitch
deployments, investigating it now...

On 21 April 2016 at 11:04, Paras pradhan <pradhanparas at gmail.com> wrote:

> Yes . I did. here is my nova.conf. Can you share yours?
> http://paste.openstack.org/show/494988/
>
> On Thu, Apr 21, 2016 at 7:36 AM, Eugen Block <eblock at nde.ag> wrote:
>
>> Okay, did you restart the respective services on all nodes after the
>> changes in your config files? If the same error still occurs then you might
>> haven't found all occurrences of the option auth_plugin, did you replace it
>> in all config files? I'm just guessing here...
>>
>>
>>
>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>
>> No I still have that error. Other than that I don't see any other errors.
>>>
>>> On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <eblock at nde.ag> wrote:
>>>
>>> So I guess the mentioned error should be resolved? Does it work now?
>>>>
>>>>
>>>>
>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>
>>>> Yes I I have it set up in nova.conf and neutron.conf
>>>>
>>>>>
>>>>> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>>
>>>>> And did you change it to auth_type instead of auth_plugin? Also you
>>>>> should
>>>>>
>>>>>> make sure that this option is in the correct section of your config
>>>>>> file,
>>>>>> for example
>>>>>>
>>>>>> [keystone_authtoken]
>>>>>> ...
>>>>>> auth_type = password
>>>>>>
>>>>>> or
>>>>>>
>>>>>> [neutron]
>>>>>> ...
>>>>>> auth_type = password
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Eugen
>>>>>>
>>>>>>
>>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>>
>>>>>> Hi Eugen,
>>>>>>
>>>>>>
>>>>>>> Thanks. Log says its an error. Here is the full log.
>>>>>>> http://pastebin.com/K1f4pJhB
>>>>>>>
>>>>>>> -Paras.
>>>>>>>
>>>>>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>>>>
>>>>>>> Hi Paras,
>>>>>>>
>>>>>>>
>>>>>>>> the option auth_plugin is deprecated (from nova.conf):
>>>>>>>>
>>>>>>>> ---cut here---
>>>>>>>> # Authentication type to load (unknown value)
>>>>>>>> # Deprecated group/name - [DEFAULT]/auth_plugin
>>>>>>>> auth_type = password
>>>>>>>> ---cut here---
>>>>>>>>
>>>>>>>> But as far as I can tell, you should only get a warning, not an
>>>>>>>> error,
>>>>>>>> I've seen some of these warnings in my logs, but it works (I work
>>>>>>>> with
>>>>>>>> openSUSE). To get Mitaka working at all I simply tried to set the
>>>>>>>> same
>>>>>>>> options as in my working Liberty configs, and then I searched for
>>>>>>>> deprecation warnings and additional options mentioned in the Mitaka
>>>>>>>> guide.
>>>>>>>>
>>>>>>>> Hope this helps!
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Eugen
>>>>>>>>
>>>>>>>>
>>>>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>
>>>>>>>>
>>>>>>>> Can somebody share the nova.conf and neutron.conf from working
>>>>>>>> mitaka?
>>>>>>>> I
>>>>>>>> am
>>>>>>>>
>>>>>>>> also following the same guide and ran into a problem.
>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>>>>>>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>>>>>>>
>>>>>>>>> Not sure what did I do wrong. It was while launching an instance.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> Paras.
>>>>>>>>>
>>>>>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <
>>>>>>>>> nasir.mahmood at gmail.com
>>>>>>>>> >
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Martinx,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> glad to see that you are able to dig into the typo issue. I
>>>>>>>>>> remember, I
>>>>>>>>>> had to completely re-re-clean install my virtual setup of
>>>>>>>>>> OpenStack
>>>>>>>>>> for a
>>>>>>>>>> POC back in 2015 , just because I have had miss-configured my
>>>>>>>>>> neutron.conf's mysql DB connector information.
>>>>>>>>>>
>>>>>>>>>> Cheers!
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>> Nasir Mahmood
>>>>>>>>>>
>>>>>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>>>>>>>> thiagocmartinsc at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> FIXED!! I knew it was a typo somewhere!   LOL
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>>>>>>>
>>>>>>>>>>> Thank you guys!
>>>>>>>>>>>
>>>>>>>>>>> Sorry about the buzz on TWO mail lists...
>>>>>>>>>>>
>>>>>>>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>>>>>>>> somethings aren't configured according... And there is no
>>>>>>>>>>> verification
>>>>>>>>>>> steps to test the communication between Nova and Neutron.
>>>>>>>>>>>
>>>>>>>>>>>  Mitaka is working now on Xenial! YAY!!
>>>>>>>>>>>
>>>>>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>>>>>>>> multi-node deployments, fully automated!
>>>>>>>>>>>
>>>>>>>>>>> Cheers!
>>>>>>>>>>> Thiago
>>>>>>>>>>>
>>>>>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <
>>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>>> >
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <
>>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>>> >
>>>>>>>>>>>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Guys,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using
>>>>>>>>>>>>> the
>>>>>>>>>>>>> following document:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Yes, I know, the above document is for installing Mitaka on
>>>>>>>>>>>>> top
>>>>>>>>>>>>> of
>>>>>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference
>>>>>>>>>>>>> is
>>>>>>>>>>>>> that
>>>>>>>>>>>>> on
>>>>>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud
>>>>>>>>>>>>> Archive,
>>>>>>>>>>>>> since
>>>>>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that
>>>>>>>>>>>>> document,
>>>>>>>>>>>>> right?
>>>>>>>>>>>>>  =)
>>>>>>>>>>>>>
>>>>>>>>>>>>>  At first, OpenStack installation goes okay, without any
>>>>>>>>>>>>> errors,
>>>>>>>>>>>>> all
>>>>>>>>>>>>> services comes up, etc... However, it is not possible to
>>>>>>>>>>>>> launch an
>>>>>>>>>>>>> Instance.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  *** Errors on launching the Instance:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  - Right after launching it:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  https://paste.ubuntu.com/15902503/
>>>>>>>>>>>>>
>>>>>>>>>>>>>  - Spawning it, after Glance finishes the download, similar
>>>>>>>>>>>>> error
>>>>>>>>>>>>> a
>>>>>>>>>>>>> second time:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  https://paste.ubuntu.com/15902556/
>>>>>>>>>>>>>
>>>>>>>>>>>>>  What am I missing?
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Apparently, Nova is not authorized to talk with Neutron but,
>>>>>>>>>>>>> I am
>>>>>>>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Also, I have an Ansible automation to deploy it, so, it is
>>>>>>>>>>>>> less
>>>>>>>>>>>>> error
>>>>>>>>>>>>> prone. And however can help me, will see how I am deploying it.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I see no error on Admin Dashboard, all services are up.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  NOTE: My Ansible playbooks is in a sense, "
>>>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully
>>>>>>>>>>>>> automated",
>>>>>>>>>>>>> it
>>>>>>>>>>>>> is
>>>>>>>>>>>>> very close to it, step-by-step.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  How can I debug this? I mean, how can I try to do, what Nova
>>>>>>>>>>>>> is
>>>>>>>>>>>>> doing
>>>>>>>>>>>>> (its connection with Neutron), to make sure that the settings
>>>>>>>>>>>>> are
>>>>>>>>>>>>> in
>>>>>>>>>>>>> place
>>>>>>>>>>>>> correctly?
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Here is how I am installing Mitaka on Xenial:
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---
>>>>>>>>>>>>>  1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>>>>>>>
>>>>>>>>>>>>>    * Configure your /etc/hostname and /etc/hosts.
>>>>>>>>>>>>>
>>>>>>>>>>>>>    DETAILS:
>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  2- Clone the automation:
>>>>>>>>>>>>>
>>>>>>>>>>>>>     cd ~
>>>>>>>>>>>>>     git clone https://github.com/tmartinx/svauto.git
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  3- Run the automation to install OpenStack (all-in-one)
>>>>>>>>>>>>>
>>>>>>>>>>>>>     cd ~/svauto
>>>>>>>>>>>>>
>>>>>>>>>>>>>    ./os-deploy.sh --br-mode=LBR --use-dummies
>>>>>>>>>>>>> --base-os=ubuntu16
>>>>>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>>>>>>>> --openstack-installation
>>>>>>>>>>>>> --dry-run
>>>>>>>>>>>>>
>>>>>>>>>>>>>    ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>>>>>>>> "openstack_installation=yes"
>>>>>>>>>>>>> ---
>>>>>>>>>>>>>
>>>>>>>>>>>>>  NOTE: If you don't use "--dry-run" option, Ansible will be
>>>>>>>>>>>>> executed
>>>>>>>>>>>>> automatically by "os-deploy.sh".
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I am sharing the Ansible playbooks, because it will be easier
>>>>>>>>>>>>> to
>>>>>>>>>>>>> see
>>>>>>>>>>>>> what I am doing.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  About the relevant configuration blocks, I believe that I
>>>>>>>>>>>>> have it
>>>>>>>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  * neutron.conf:
>>>>>>>>>>>>> -
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>>>>>>>> -
>>>>>>>>>>>>>
>>>>>>>>>>>>>  * nova.conf:
>>>>>>>>>>>>> -
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>>>>>>>> -
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I already installed OpenStack many, many, many times, since
>>>>>>>>>>>>> Havana
>>>>>>>>>>>>> release, I'm confident that I am doing it right but, of course,
>>>>>>>>>>>>> maybe
>>>>>>>>>>>>> I did
>>>>>>>>>>>>> something wrong this time...   =P
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I appreciate any help!
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>> Thiago
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hey guys,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>  I am reviewing everything, to make sure that my automation
>>>>>>>>>>>> matches
>>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>>>>>>>
>>>>>>>>>>>>  Two things...
>>>>>>>>>>>>
>>>>>>>>>>>> ---
>>>>>>>>>>>>  1- All the verification steps (from official doc) passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>>>>>>>> - passed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>>>>>>>> - passed (mine doesn't have /horizon)
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>>>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>>>>>>>> - "6. Launch the instance" - FAIL
>>>>>>>>>>>>
>>>>>>>>>>>>   NOTE: I can create Networks, Subnets, Routers... I can see the
>>>>>>>>>>>> Linux
>>>>>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  2- This problem happen no matter if deploying it with Linux
>>>>>>>>>>>> Bridges
>>>>>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>>>>>>>> ---
>>>>>>>>>>>>
>>>>>>>>>>>>  So, I think that OpenStack should provide more verification
>>>>>>>>>>>> steps,
>>>>>>>>>>>> specially to test the communication / authentication between its
>>>>>>>>>>>> different
>>>>>>>>>>>> projects, for example:
>>>>>>>>>>>>
>>>>>>>>>>>>  A- Does Nova can communicate with Neutron? How to test this?
>>>>>>>>>>>>
>>>>>>>>>>>>  B- Can Nova download images from Glance? Etc...
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  Doing more reviews now...
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Cheers!
>>>>>>>>>>>> Thiago
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>
>>>>>>>>>>> Mailing list:
>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>>>>> Unsubscribe :
>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>> Nasir Mahmood
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Mailing list:
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>>>> Unsubscribe :
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>>>>> Postfach 61 03 15
>>>>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>>>>
>>>>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>>>>                    USt-IdNr. DE 814 013 983
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Mailing list:
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>> Unsubscribe :
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>> --
>>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>>> Postfach 61 03 15
>>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>>
>>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>>                    USt-IdNr. DE 814 013 983
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>> --
>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>> Postfach 61 03 15
>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>
>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>                   Vorstand: Jens-U. Mozdzen
>>>>                    USt-IdNr. DE 814 013 983
>>>>
>>>>
>>>>
>>
>>
>> --
>> Eugen Block                             voice   : +49-40-559 51 75
>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>> Postfach 61 03 15
>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>
>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>           Sitz und Registergericht: Hamburg, HRB 90934
>>                   Vorstand: Jens-U. Mozdzen
>>                    USt-IdNr. DE 814 013 983
>>
>>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160421/50ce91c7/attachment.html>