[Openstack] Xenial / Mitaka = Instance failed network setup / nova.compute.manager Unauthorized

Paras pradhan pradhanparas at gmail.com
Thu Apr 21 19:44:26 UTC 2016 

The neutron section was missing from nova.conf and now the instances work
but having issues with metadata server. instances boot but no network
access.
Thanks
Paras.

On Thu, Apr 21, 2016 at 9:58 AM, Martinx - ジェームズ <thiagocmartinsc at gmail.com>
wrote:

> My nova.conf is this one:
>
>
> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_cmpt/templates/mitaka/nova.conf
>
> However, I'm facing connectivity problems when with OpenvSwitch
> deployments, investigating it now...
>
> On 21 April 2016 at 11:04, Paras pradhan <pradhanparas at gmail.com> wrote:
>
>> Yes . I did. here is my nova.conf. Can you share yours?
>> http://paste.openstack.org/show/494988/
>>
>> On Thu, Apr 21, 2016 at 7:36 AM, Eugen Block <eblock at nde.ag> wrote:
>>
>>> Okay, did you restart the respective services on all nodes after the
>>> changes in your config files? If the same error still occurs then you might
>>> haven't found all occurrences of the option auth_plugin, did you replace it
>>> in all config files? I'm just guessing here...
>>>
>>>
>>>
>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>
>>> No I still have that error. Other than that I don't see any other errors.
>>>>
>>>> On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>
>>>> So I guess the mentioned error should be resolved? Does it work now?
>>>>>
>>>>>
>>>>>
>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>
>>>>> Yes I I have it set up in nova.conf and neutron.conf
>>>>>
>>>>>>
>>>>>> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>>>
>>>>>> And did you change it to auth_type instead of auth_plugin? Also you
>>>>>> should
>>>>>>
>>>>>>> make sure that this option is in the correct section of your config
>>>>>>> file,
>>>>>>> for example
>>>>>>>
>>>>>>> [keystone_authtoken]
>>>>>>> ...
>>>>>>> auth_type = password
>>>>>>>
>>>>>>> or
>>>>>>>
>>>>>>> [neutron]
>>>>>>> ...
>>>>>>> auth_type = password
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>> Eugen
>>>>>>>
>>>>>>>
>>>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>
>>>>>>> Hi Eugen,
>>>>>>>
>>>>>>>
>>>>>>>> Thanks. Log says its an error. Here is the full log.
>>>>>>>> http://pastebin.com/K1f4pJhB
>>>>>>>>
>>>>>>>> -Paras.
>>>>>>>>
>>>>>>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>>>>>
>>>>>>>> Hi Paras,
>>>>>>>>
>>>>>>>>
>>>>>>>>> the option auth_plugin is deprecated (from nova.conf):
>>>>>>>>>
>>>>>>>>> ---cut here---
>>>>>>>>> # Authentication type to load (unknown value)
>>>>>>>>> # Deprecated group/name - [DEFAULT]/auth_plugin
>>>>>>>>> auth_type = password
>>>>>>>>> ---cut here---
>>>>>>>>>
>>>>>>>>> But as far as I can tell, you should only get a warning, not an
>>>>>>>>> error,
>>>>>>>>> I've seen some of these warnings in my logs, but it works (I work
>>>>>>>>> with
>>>>>>>>> openSUSE). To get Mitaka working at all I simply tried to set the
>>>>>>>>> same
>>>>>>>>> options as in my working Liberty configs, and then I searched for
>>>>>>>>> deprecation warnings and additional options mentioned in the Mitaka
>>>>>>>>> guide.
>>>>>>>>>
>>>>>>>>> Hope this helps!
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Eugen
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Can somebody share the nova.conf and neutron.conf from working
>>>>>>>>> mitaka?
>>>>>>>>> I
>>>>>>>>> am
>>>>>>>>>
>>>>>>>>> also following the same guide and ran into a problem.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>>>>>>>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>>>>>>>>
>>>>>>>>>> Not sure what did I do wrong. It was while launching an instance.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>>>>
>>>>>>>>>> Paras.
>>>>>>>>>>
>>>>>>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <
>>>>>>>>>> nasir.mahmood at gmail.com
>>>>>>>>>> >
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Martinx,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> glad to see that you are able to dig into the typo issue. I
>>>>>>>>>>> remember, I
>>>>>>>>>>> had to completely re-re-clean install my virtual setup of
>>>>>>>>>>> OpenStack
>>>>>>>>>>> for a
>>>>>>>>>>> POC back in 2015 , just because I have had miss-configured my
>>>>>>>>>>> neutron.conf's mysql DB connector information.
>>>>>>>>>>>
>>>>>>>>>>> Cheers!
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>> Nasir Mahmood
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>>>>>>>>> thiagocmartinsc at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>> FIXED!! I knew it was a typo somewhere!   LOL
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>>>>>>>>
>>>>>>>>>>>> Thank you guys!
>>>>>>>>>>>>
>>>>>>>>>>>> Sorry about the buzz on TWO mail lists...
>>>>>>>>>>>>
>>>>>>>>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>>>>>>>>> somethings aren't configured according... And there is no
>>>>>>>>>>>> verification
>>>>>>>>>>>> steps to test the communication between Nova and Neutron.
>>>>>>>>>>>>
>>>>>>>>>>>>  Mitaka is working now on Xenial! YAY!!
>>>>>>>>>>>>
>>>>>>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>>>>>>>>> multi-node deployments, fully automated!
>>>>>>>>>>>>
>>>>>>>>>>>> Cheers!
>>>>>>>>>>>> Thiago
>>>>>>>>>>>>
>>>>>>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <
>>>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>>>> >
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <
>>>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Guys,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> following document:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Yes, I know, the above document is for installing Mitaka on
>>>>>>>>>>>>>> top
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference
>>>>>>>>>>>>>> is
>>>>>>>>>>>>>> that
>>>>>>>>>>>>>> on
>>>>>>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud
>>>>>>>>>>>>>> Archive,
>>>>>>>>>>>>>> since
>>>>>>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that
>>>>>>>>>>>>>> document,
>>>>>>>>>>>>>> right?
>>>>>>>>>>>>>>  =)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  At first, OpenStack installation goes okay, without any
>>>>>>>>>>>>>> errors,
>>>>>>>>>>>>>> all
>>>>>>>>>>>>>> services comes up, etc... However, it is not possible to
>>>>>>>>>>>>>> launch an
>>>>>>>>>>>>>> Instance.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  *** Errors on launching the Instance:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  - Right after launching it:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  https://paste.ubuntu.com/15902503/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  - Spawning it, after Glance finishes the download, similar
>>>>>>>>>>>>>> error
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> second time:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  https://paste.ubuntu.com/15902556/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  What am I missing?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Apparently, Nova is not authorized to talk with Neutron but,
>>>>>>>>>>>>>> I am
>>>>>>>>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Also, I have an Ansible automation to deploy it, so, it is
>>>>>>>>>>>>>> less
>>>>>>>>>>>>>> error
>>>>>>>>>>>>>> prone. And however can help me, will see how I am deploying
>>>>>>>>>>>>>> it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  I see no error on Admin Dashboard, all services are up.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  NOTE: My Ansible playbooks is in a sense, "
>>>>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully
>>>>>>>>>>>>>> automated",
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> is
>>>>>>>>>>>>>> very close to it, step-by-step.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  How can I debug this? I mean, how can I try to do, what Nova
>>>>>>>>>>>>>> is
>>>>>>>>>>>>>> doing
>>>>>>>>>>>>>> (its connection with Neutron), to make sure that the settings
>>>>>>>>>>>>>> are
>>>>>>>>>>>>>> in
>>>>>>>>>>>>>> place
>>>>>>>>>>>>>> correctly?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Here is how I am installing Mitaka on Xenial:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>  1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>    * Configure your /etc/hostname and /etc/hosts.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>    DETAILS:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  2- Clone the automation:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>     cd ~
>>>>>>>>>>>>>>     git clone https://github.com/tmartinx/svauto.git
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  3- Run the automation to install OpenStack (all-in-one)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>     cd ~/svauto
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>    ./os-deploy.sh --br-mode=LBR --use-dummies
>>>>>>>>>>>>>> --base-os=ubuntu16
>>>>>>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>>>>>>>>> --openstack-installation
>>>>>>>>>>>>>> --dry-run
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>    ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>>>>>>>>> "openstack_installation=yes"
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  NOTE: If you don't use "--dry-run" option, Ansible will be
>>>>>>>>>>>>>> executed
>>>>>>>>>>>>>> automatically by "os-deploy.sh".
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  I am sharing the Ansible playbooks, because it will be
>>>>>>>>>>>>>> easier to
>>>>>>>>>>>>>> see
>>>>>>>>>>>>>> what I am doing.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  About the relevant configuration blocks, I believe that I
>>>>>>>>>>>>>> have it
>>>>>>>>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  * neutron.conf:
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  * nova.conf:
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  I already installed OpenStack many, many, many times, since
>>>>>>>>>>>>>> Havana
>>>>>>>>>>>>>> release, I'm confident that I am doing it right but, of
>>>>>>>>>>>>>> course,
>>>>>>>>>>>>>> maybe
>>>>>>>>>>>>>> I did
>>>>>>>>>>>>>> something wrong this time...   =P
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  I appreciate any help!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>> Thiago
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hey guys,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>  I am reviewing everything, to make sure that my automation
>>>>>>>>>>>>> matches
>>>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Two things...
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---
>>>>>>>>>>>>>  1- All the verification steps (from official doc) passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>>>>>>>>> - passed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>>>>>>>>> - passed (mine doesn't have /horizon)
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>>>>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>>>>>>>>> - "6. Launch the instance" - FAIL
>>>>>>>>>>>>>
>>>>>>>>>>>>>   NOTE: I can create Networks, Subnets, Routers... I can see
>>>>>>>>>>>>> the
>>>>>>>>>>>>> Linux
>>>>>>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  2- This problem happen no matter if deploying it with Linux
>>>>>>>>>>>>> Bridges
>>>>>>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>>>>>>>>> ---
>>>>>>>>>>>>>
>>>>>>>>>>>>>  So, I think that OpenStack should provide more verification
>>>>>>>>>>>>> steps,
>>>>>>>>>>>>> specially to test the communication / authentication between
>>>>>>>>>>>>> its
>>>>>>>>>>>>> different
>>>>>>>>>>>>> projects, for example:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  A- Does Nova can communicate with Neutron? How to test this?
>>>>>>>>>>>>>
>>>>>>>>>>>>>  B- Can Nova download images from Glance? Etc...
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Doing more reviews now...
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Cheers!
>>>>>>>>>>>>> Thiago
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>
>>>>>>>>>>>> Mailing list:
>>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>>>>>> Unsubscribe :
>>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>> Nasir Mahmood
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Mailing list:
>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>>>>> Unsubscribe :
>>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>>>>>> Postfach 61 03 15
>>>>>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>>>>>
>>>>>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>>>>>                    USt-IdNr. DE 814 013 983
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Mailing list:
>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>>> Unsubscribe :
>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> --
>>>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>>>> Postfach 61 03 15
>>>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>>>
>>>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>>>                    USt-IdNr. DE 814 013 983
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>> --
>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>> Postfach 61 03 15
>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>
>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>                    USt-IdNr. DE 814 013 983
>>>>>
>>>>>
>>>>>
>>>
>>>
>>> --
>>> Eugen Block                             voice   : +49-40-559 51 75
>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>> Postfach 61 03 15
>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>
>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>                   Vorstand: Jens-U. Mozdzen
>>>                    USt-IdNr. DE 814 013 983
>>>
>>>
>>
>> _______________________________________________
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to     : openstack at lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160421/3f136b07/attachment.html>

More information about the Openstack mailing list