[Openstack] Xenial / Mitaka = Instance failed network setup / nova.compute.manager Unauthorized
Paras pradhan
pradhanparas at gmail.com
Thu Apr 21 14:04:56 UTC 2016
Yes . I did. here is my nova.conf. Can you share yours?
http://paste.openstack.org/show/494988/
On Thu, Apr 21, 2016 at 7:36 AM, Eugen Block <eblock at nde.ag> wrote:
> Okay, did you restart the respective services on all nodes after the
> changes in your config files? If the same error still occurs then you might
> haven't found all occurrences of the option auth_plugin, did you replace it
> in all config files? I'm just guessing here...
>
>
>
> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>
> No I still have that error. Other than that I don't see any other errors.
>>
>> On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <eblock at nde.ag> wrote:
>>
>> So I guess the mentioned error should be resolved? Does it work now?
>>>
>>>
>>>
>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>
>>> Yes I I have it set up in nova.conf and neutron.conf
>>>
>>>>
>>>> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>
>>>> And did you change it to auth_type instead of auth_plugin? Also you
>>>> should
>>>>
>>>>> make sure that this option is in the correct section of your config
>>>>> file,
>>>>> for example
>>>>>
>>>>> [keystone_authtoken]
>>>>> ...
>>>>> auth_type = password
>>>>>
>>>>> or
>>>>>
>>>>> [neutron]
>>>>> ...
>>>>> auth_type = password
>>>>>
>>>>>
>>>>> Regards,
>>>>> Eugen
>>>>>
>>>>>
>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>
>>>>> Hi Eugen,
>>>>>
>>>>>
>>>>>> Thanks. Log says its an error. Here is the full log.
>>>>>> http://pastebin.com/K1f4pJhB
>>>>>>
>>>>>> -Paras.
>>>>>>
>>>>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>>>
>>>>>> Hi Paras,
>>>>>>
>>>>>>
>>>>>>> the option auth_plugin is deprecated (from nova.conf):
>>>>>>>
>>>>>>> ---cut here---
>>>>>>> # Authentication type to load (unknown value)
>>>>>>> # Deprecated group/name - [DEFAULT]/auth_plugin
>>>>>>> auth_type = password
>>>>>>> ---cut here---
>>>>>>>
>>>>>>> But as far as I can tell, you should only get a warning, not an
>>>>>>> error,
>>>>>>> I've seen some of these warnings in my logs, but it works (I work
>>>>>>> with
>>>>>>> openSUSE). To get Mitaka working at all I simply tried to set the
>>>>>>> same
>>>>>>> options as in my working Liberty configs, and then I searched for
>>>>>>> deprecation warnings and additional options mentioned in the Mitaka
>>>>>>> guide.
>>>>>>>
>>>>>>> Hope this helps!
>>>>>>>
>>>>>>> Regards,
>>>>>>> Eugen
>>>>>>>
>>>>>>>
>>>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>>>
>>>>>>>
>>>>>>> Can somebody share the nova.conf and neutron.conf from working
>>>>>>> mitaka?
>>>>>>> I
>>>>>>> am
>>>>>>>
>>>>>>> also following the same guide and ran into a problem.
>>>>>>>
>>>>>>>>
>>>>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>>>>>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>>>>>>
>>>>>>>> Not sure what did I do wrong. It was while launching an instance.
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> Paras.
>>>>>>>>
>>>>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <
>>>>>>>> nasir.mahmood at gmail.com
>>>>>>>> >
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Martinx,
>>>>>>>>
>>>>>>>>
>>>>>>>> glad to see that you are able to dig into the typo issue. I
>>>>>>>>> remember, I
>>>>>>>>> had to completely re-re-clean install my virtual setup of OpenStack
>>>>>>>>> for a
>>>>>>>>> POC back in 2015 , just because I have had miss-configured my
>>>>>>>>> neutron.conf's mysql DB connector information.
>>>>>>>>>
>>>>>>>>> Cheers!
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Nasir Mahmood
>>>>>>>>>
>>>>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>>>>>>> thiagocmartinsc at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> FIXED!! I knew it was a typo somewhere! LOL
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>>>>>>
>>>>>>>>>> Thank you guys!
>>>>>>>>>>
>>>>>>>>>> Sorry about the buzz on TWO mail lists...
>>>>>>>>>>
>>>>>>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>>>>>>> somethings aren't configured according... And there is no
>>>>>>>>>> verification
>>>>>>>>>> steps to test the communication between Nova and Neutron.
>>>>>>>>>>
>>>>>>>>>> Mitaka is working now on Xenial! YAY!!
>>>>>>>>>>
>>>>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>>>>>>> multi-node deployments, fully automated!
>>>>>>>>>>
>>>>>>>>>> Cheers!
>>>>>>>>>> Thiago
>>>>>>>>>>
>>>>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <
>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>> >
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <
>>>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>>>> >
>>>>>>>>>>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Guys,
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using
>>>>>>>>>>>> the
>>>>>>>>>>>> following document:
>>>>>>>>>>>>
>>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>>>>>>
>>>>>>>>>>>> Yes, I know, the above document is for installing Mitaka on top
>>>>>>>>>>>> of
>>>>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is
>>>>>>>>>>>> that
>>>>>>>>>>>> on
>>>>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive,
>>>>>>>>>>>> since
>>>>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that document,
>>>>>>>>>>>> right?
>>>>>>>>>>>> =)
>>>>>>>>>>>>
>>>>>>>>>>>> At first, OpenStack installation goes okay, without any errors,
>>>>>>>>>>>> all
>>>>>>>>>>>> services comes up, etc... However, it is not possible to launch
>>>>>>>>>>>> an
>>>>>>>>>>>> Instance.
>>>>>>>>>>>>
>>>>>>>>>>>> *** Errors on launching the Instance:
>>>>>>>>>>>>
>>>>>>>>>>>> - Right after launching it:
>>>>>>>>>>>>
>>>>>>>>>>>> https://paste.ubuntu.com/15902503/
>>>>>>>>>>>>
>>>>>>>>>>>> - Spawning it, after Glance finishes the download, similar
>>>>>>>>>>>> error
>>>>>>>>>>>> a
>>>>>>>>>>>> second time:
>>>>>>>>>>>>
>>>>>>>>>>>> https://paste.ubuntu.com/15902556/
>>>>>>>>>>>>
>>>>>>>>>>>> What am I missing?
>>>>>>>>>>>>
>>>>>>>>>>>> Apparently, Nova is not authorized to talk with Neutron but, I
>>>>>>>>>>>> am
>>>>>>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>>>>>>
>>>>>>>>>>>> Also, I have an Ansible automation to deploy it, so, it is less
>>>>>>>>>>>> error
>>>>>>>>>>>> prone. And however can help me, will see how I am deploying it.
>>>>>>>>>>>>
>>>>>>>>>>>> I see no error on Admin Dashboard, all services are up.
>>>>>>>>>>>>
>>>>>>>>>>>> NOTE: My Ansible playbooks is in a sense, "
>>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully
>>>>>>>>>>>> automated",
>>>>>>>>>>>> it
>>>>>>>>>>>> is
>>>>>>>>>>>> very close to it, step-by-step.
>>>>>>>>>>>>
>>>>>>>>>>>> How can I debug this? I mean, how can I try to do, what Nova is
>>>>>>>>>>>> doing
>>>>>>>>>>>> (its connection with Neutron), to make sure that the settings
>>>>>>>>>>>> are
>>>>>>>>>>>> in
>>>>>>>>>>>> place
>>>>>>>>>>>> correctly?
>>>>>>>>>>>>
>>>>>>>>>>>> Here is how I am installing Mitaka on Xenial:
>>>>>>>>>>>>
>>>>>>>>>>>> ---
>>>>>>>>>>>> 1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>>>>>>
>>>>>>>>>>>> * Configure your /etc/hostname and /etc/hosts.
>>>>>>>>>>>>
>>>>>>>>>>>> DETAILS:
>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2- Clone the automation:
>>>>>>>>>>>>
>>>>>>>>>>>> cd ~
>>>>>>>>>>>> git clone https://github.com/tmartinx/svauto.git
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 3- Run the automation to install OpenStack (all-in-one)
>>>>>>>>>>>>
>>>>>>>>>>>> cd ~/svauto
>>>>>>>>>>>>
>>>>>>>>>>>> ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16
>>>>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>>>>>>> --openstack-installation
>>>>>>>>>>>> --dry-run
>>>>>>>>>>>>
>>>>>>>>>>>> ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>>>>>>> "openstack_installation=yes"
>>>>>>>>>>>> ---
>>>>>>>>>>>>
>>>>>>>>>>>> NOTE: If you don't use "--dry-run" option, Ansible will be
>>>>>>>>>>>> executed
>>>>>>>>>>>> automatically by "os-deploy.sh".
>>>>>>>>>>>>
>>>>>>>>>>>> I am sharing the Ansible playbooks, because it will be easier
>>>>>>>>>>>> to
>>>>>>>>>>>> see
>>>>>>>>>>>> what I am doing.
>>>>>>>>>>>>
>>>>>>>>>>>> About the relevant configuration blocks, I believe that I have
>>>>>>>>>>>> it
>>>>>>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>>>>>>
>>>>>>>>>>>> * neutron.conf:
>>>>>>>>>>>> -
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>>>>>>> -
>>>>>>>>>>>>
>>>>>>>>>>>> * nova.conf:
>>>>>>>>>>>> -
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>>>>>>> -
>>>>>>>>>>>>
>>>>>>>>>>>> I already installed OpenStack many, many, many times, since
>>>>>>>>>>>> Havana
>>>>>>>>>>>> release, I'm confident that I am doing it right but, of course,
>>>>>>>>>>>> maybe
>>>>>>>>>>>> I did
>>>>>>>>>>>> something wrong this time... =P
>>>>>>>>>>>>
>>>>>>>>>>>> I appreciate any help!
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks!
>>>>>>>>>>>> Thiago
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Hey guys,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> I am reviewing everything, to make sure that my automation
>>>>>>>>>>> matches
>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>>>>>>
>>>>>>>>>>> Two things...
>>>>>>>>>>>
>>>>>>>>>>> ---
>>>>>>>>>>> 1- All the verification steps (from official doc) passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>>>>>>> - passed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>>>>>>> - passed (mine doesn't have /horizon)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>>>>>>> - "6. Launch the instance" - FAIL
>>>>>>>>>>>
>>>>>>>>>>> NOTE: I can create Networks, Subnets, Routers... I can see the
>>>>>>>>>>> Linux
>>>>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2- This problem happen no matter if deploying it with Linux
>>>>>>>>>>> Bridges
>>>>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>>>>>>> ---
>>>>>>>>>>>
>>>>>>>>>>> So, I think that OpenStack should provide more verification
>>>>>>>>>>> steps,
>>>>>>>>>>> specially to test the communication / authentication between its
>>>>>>>>>>> different
>>>>>>>>>>> projects, for example:
>>>>>>>>>>>
>>>>>>>>>>> A- Does Nova can communicate with Neutron? How to test this?
>>>>>>>>>>>
>>>>>>>>>>> B- Can Nova download images from Glance? Etc...
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Doing more reviews now...
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Cheers!
>>>>>>>>>>> Thiago
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>
>>>>>>>>>> Mailing list:
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>> Post to : openstack at lists.openstack.org
>>>>>>>>>> Unsubscribe :
>>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>>
>>>>>>>>> Nasir Mahmood
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Mailing list:
>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>> Post to : openstack at lists.openstack.org
>>>>>>>>> Unsubscribe :
>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>> Eugen Block voice : +49-40-559 51 75
>>>>>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77
>>>>>>> Postfach 61 03 15
>>>>>>> D-22423 Hamburg e-mail : eblock at nde.ag
>>>>>>>
>>>>>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>>> Sitz und Registergericht: Hamburg, HRB 90934
>>>>>>> Vorstand: Jens-U. Mozdzen
>>>>>>> USt-IdNr. DE 814 013 983
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list:
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>> Post to : openstack at lists.openstack.org
>>>>>>> Unsubscribe :
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> --
>>>>> Eugen Block voice : +49-40-559 51 75
>>>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77
>>>>> Postfach 61 03 15
>>>>> D-22423 Hamburg e-mail : eblock at nde.ag
>>>>>
>>>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>> Sitz und Registergericht: Hamburg, HRB 90934
>>>>> Vorstand: Jens-U. Mozdzen
>>>>> USt-IdNr. DE 814 013 983
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>> --
>>> Eugen Block voice : +49-40-559 51 75
>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77
>>> Postfach 61 03 15
>>> D-22423 Hamburg e-mail : eblock at nde.ag
>>>
>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>> Sitz und Registergericht: Hamburg, HRB 90934
>>> Vorstand: Jens-U. Mozdzen
>>> USt-IdNr. DE 814 013 983
>>>
>>>
>>>
>
>
> --
> Eugen Block voice : +49-40-559 51 75
> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77
> Postfach 61 03 15
> D-22423 Hamburg e-mail : eblock at nde.ag
>
> Vorsitzende des Aufsichtsrates: Angelika Mozdzen
> Sitz und Registergericht: Hamburg, HRB 90934
> Vorstand: Jens-U. Mozdzen
> USt-IdNr. DE 814 013 983
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160421/1e36b676/attachment.html>
More information about the Openstack
mailing list