[Openstack] KILO -- Max disk size is 20 gb

Nasir Mahmood nasir.mahmood at gmail.com
Mon Sep 28 12:30:33 UTC 2015


Yes, Georgios,

very True.. I'm following the same thing and its working now...default
OpenStack images dont come with these tools and need to be installed and
then use the snapshot...right

On Mon, Sep 28, 2015 at 4:10 PM, Georgios Dimitrakakis <giorgis at acmac.uoc.gr
> wrote:

> I remember having a similar problem with an older CentOS image.
>
> The steps I did to correct it were the following:
>
> 1) Updated to the latest version
> yum update
>
> 2) Installed (if not installed) cloud-init, cloud-utils,
> dracut-modules-growroot
> yum install cloud-init cloud-utils dracut-modules-growroot
>
> 3) Rebuild the initramfs to use the latest installed dracut module
> dracut --force
>
>
> Shutoff the machine and create a snapshot of it. Use this snapshot to bui
>
> hi All,
>>
>> I have
>>
>> 1) downloaded a brand new CentOs 6.7 QCOW2 image from Centos Repo.
>>
>> 2) spinned up the VM -- it worked like a charm
>>
>> 3) disk is still showing 7.8 GB in Size -- whereas I have allocated a
>> 500 GB to this VM. below is output from the fdisk -l.
>>
>> 4) I dont see any error logs in cloud-init messages. Everything seems
>>
>> perfect while booting up.
>>
>> [root at cmp1 ~]# df -h
>> Filesystem      Size  Used Avail Use% Mounted on
>> /dev/vda1       7.8G  613M  6.8G   9% /
>> tmpfs           5.7G     0  5.7G   0% /dev/shm
>> [root at cmp1 ~]#
>>
>> [root at cmp1 ~] # fdisk -l
>>
>> Disk /dev/vda: 536.9 GB, 536870912000 bytes
>> 255 heads, 63 sectors/track, 65270 cylinders
>> Units = cylinders of 16065 * 512 = 8225280 bytes
>> Sector size (logical/physical): 512 bytes / 512 bytes
>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>> Disk identifier: 0x000574cf
>>
>>    Device Boot      Start         End      Blocks   Id
>>  System
>> /dev/vda1   *           1        1045     8387584   83
>>  Linux
>> [root at cmp1 ~]
>>
>> complete boot-logs are given below:
>>
>>
>>
>> -----------------------------------------------------------------------------------------------------------------
>>
>>  nova console-log CMP1
>> Press any key to continue.
>> [H[J
>>     GNU GRUB  version 0.97  (639K lower / 3144692K upper memory)
>>
>>
>>
>> [m[4;2H+-------------------------------------------------------------------------+[5;2H|[5;76H|[6;2H|[6;76H|[7;2H|[7;76H|[8;2H|[8;76H|[9;2H|[9;76H|[10;2H|[10;76H|[11;2H|[11;76H|[12;2H|[12;76H|[13;2H|[13;76H|[14;2H|[14;76H|[15;2H|[15;76H|[16;2H|[16;76H|[17;2H+-------------------------------------------------------------------------+[m
>>       Use the ^ and v keys to select which entry is highlighted.
>>       Press enter to boot the selected OS, e to edit the
>>       commands before booting, a to modify the kernel arguments
>>       before booting, or c for a command-line.[5;78H [m[7m[5;3H
>> CentOS 6 (2.6.32-504.1.3.el6.x86_64)
>>              [5;75H[m[m[6;3H
>>
>>     [6;75H[m[m[7;3H
>>
>> [7;75H[m[m[8;3H
>>                                     [8;75H[m[m[9;3H
>>
>>                           [9;75H[m[m[10;3H
>>
>>                 [10;75H[m[m[11;3H
>>
>>         [11;75H[m[m[12;3H
>>
>> [12;75H[m[m[13;3H
>>
>> [13;75H[m[m[14;3H
>>
>> [14;75H[m[m[15;3H
>>
>> [15;75H[m[m[16;3H
>>
>> [16;75H[m[16;78H [5;75H[23;4HThe highlighted entry will be booted
>> automatically in 1 seconds.    [5;75H[H[JInitializing cgroup subsys
>> cpuset
>> Initializing cgroup subsys cpu
>> Linux version 2.6.32-504.1.3.el6.x86_64
>> (mockbuild at c6b9.bsys.dev.centos.org [8]) (gcc version 4.4.7 20120313
>>
>> (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Nov 11 17:57:25 UTC 2014
>> Command line: ro root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD console=ttyS0,115200
>> crashkernel=auto SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc
>> KEYTABLE=us rd_NO_DM
>> KERNEL supported cpus:
>>   Intel GenuineIntel
>>   AMD AuthenticAMD
>>   Centaur CentaurHauls
>> BIOS-provided physical RAM map:
>>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>  BIOS-e820: 0000000000100000 - 00000000bfffd000 (usable)
>>  BIOS-e820: 00000000bfffd000 - 00000000c0000000 (reserved)
>>  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
>>  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>>  BIOS-e820: 0000000100000000 - 000000032e000000 (usable)
>> DMI 2.4 present.
>> SMBIOS version 2.4 @ 0xF1F90
>> Hypervisor detected: KVM
>> last_pfn = 0x32e000 max_arch_pfn = 0x400000000
>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> last_pfn = 0xbfffd max_arch_pfn = 0x400000000
>> Using GB pages for direct mapping
>> init_memory_mapping: 0000000000000000-00000000bfffd000
>> init_memory_mapping: 0000000100000000-000000032e000000
>> RAMDISK: 37217000 - 37fefb6b
>> ACPI: RSDP 00000000000f1f60 00014 (v00 BOCHS )
>> ACPI: RSDT 00000000bffffa7a 00030 (v01 BOCHS  BXPCRSDT 00000001 BXPC
>> 00000001)
>> ACPI: FACP 00000000bfffee77 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC
>> 00000001)
>> ACPI: DSDT 00000000bfffdd40 01137 (v01   BXPC   BXDSDT 00000001 INTL
>> 20140926)
>> ACPI: FACS 00000000bfffdd00 00040
>> ACPI: SSDT 00000000bfffeeeb 00ADF (v01 BOCHS  BXPCSSDT 00000001 BXPC
>> 00000001)
>> ACPI: APIC 00000000bffff9ca 000B0 (v01 BOCHS  BXPCAPIC 00000001 BXPC
>> 00000001)
>> Setting APIC routing to flat.
>> No NUMA configuration found
>> Faking a node at 0000000000000000-000000032e000000
>> Bootmem setup node 0 0000000000000000-000000032e000000
>>   NODE_DATA [000000000000b000 - 000000000003efff]
>>   bootmap [0000000000100000 -  0000000000165bff] pages 66
>> (8 early reservations) ==> bootmem [0000000000 - 032e000000]
>>   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 -
>> 0000001000]
>>   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 -
>> 0000008000]
>>   #2 [0001000000 - 000202abe4]    TEXT DATA BSS ==> [0001000000 -
>> 000202abe4]
>>   #3 [0037217000 - 0037fefb6b]          RAMDISK ==> [0037217000
>> - 0037fefb6b]
>>   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 -
>> 0000100000]
>>   #5 [000202b000 - 000202b0dd]              BRK ==>
>> [000202b000 - 000202b0dd]
>>   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000
>> - 000000a000]
>>   #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000
>> - 000000b000]
>> found SMP MP-table at [ffff8800000f1fb0] f1fb0
>> Reserving 129MB of memory at 48MB for crashkernel (System RAM:
>> 13024MB)
>> kvm-clock: Using msrs 4b564d01 and 4b564d00
>> kvm-clock: cpu 0, msr 0:1c28841, boot clock
>> Zone PFN ranges:
>>   DMA      0x00000001 -> 0x00001000
>>   DMA32    0x00001000 -> 0x00100000
>>   Normal   0x00100000 -> 0x0032e000
>> Movable zone start PFN for each node
>> early_node_map[3] active PFN ranges
>>     0: 0x00000001 -> 0x0000009f
>>     0: 0x00000100 -> 0x000bfffd
>>     0: 0x00100000 -> 0x0032e000
>> ACPI: PM-Timer IO Port: 0x608
>> Setting APIC routing to flat.
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>> ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>> Using ACPI (MADT) for SMP configuration information
>> SMP: Allowing 8 CPUs, 0 hotplug CPUs
>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>> PM: Registered nosave memory: 00000000bfffd000 - 00000000c0000000
>> PM: Registered nosave memory: 00000000c0000000 - 00000000feffc000
>> PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
>> PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
>> PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
>> Allocating PCI resources starting at c0000000 (gap: c0000000:3effc000)
>> Booting paravirtualized kernel on KVM
>> NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>> PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720
>> u262144
>> pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
>> pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> kvm-clock: cpu 0, msr 0:28216841, primary cpu clock
>> kvm-stealtime: cpu 0, msr 2820e880
>> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
>> 3026213
>> Policy zone: Normal
>> Kernel command line: ro root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD console=ttyS0,115200
>> crashkernel=129M at 0M SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc
>> KEYTABLE=us rd_NO_DM
>> PID hash table entries: 4096 (order: 3, 32768 bytes)
>> Checking aperture...
>> No AGP bridge found
>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> Placing 64MB software IO TLB between ffff880020000000 -
>> ffff880024000000
>> software IO TLB at phys 0x20000000 - 0x24000000
>> Memory: 11887224k/13336576k available (5336k kernel code, 1048980k
>> absent, 400372k reserved, 7016k data, 1292k init)
>> Hierarchical RCU implementation.
>> NR_IRQS:33024 nr_irqs:472
>> Console: colour VGA+ 80x25
>> console [ttyS0] enabled
>> allocated 49283072 bytes of page_cgroup
>> please try cgroup_disable=memory option if you dont want memory
>>
>> cgroups
>> Detected 2659.998 MHz processor.
>> Calibrating delay loop (skipped) preset value.. 5319.99 BogoMIPS
>> (lpj=2659998)
>> pid_max: default: 32768 minimum: 301
>> Security Framework initialized
>> SELinux:  Initializing.
>> Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>> Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>> Mount-cache hash table entries: 256
>> Initializing cgroup subsys ns
>> Initializing cgroup subsys cpuacct
>> Initializing cgroup subsys memory
>> Initializing cgroup subsys devices
>> Initializing cgroup subsys freezer
>> Initializing cgroup subsys net_cls
>> Initializing cgroup subsys blkio
>> Initializing cgroup subsys perf_event
>> Initializing cgroup subsys net_prio
>> mce: CPU supports 10 MCE banks
>> alternatives: switching to unfair spinlock
>> ACPI: Core revision 20090903
>> ftrace: converting mcount calls to 0f 1f 44 00 00
>> ftrace: allocating 21917 entries in 86 pages
>> Enabling x2apic
>> Enabled x2apic
>> APIC routing finalized to physical x2apic.
>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>> Performance Events: unsupported p6 CPU model 44 no PMU driver,
>> software events only.
>> NMI watchdog disabled (cpu0): hardware events not enabled
>> Booting Node   0, Processors  #1
>> kvm-clock: cpu 1, msr 0:28256841, secondary cpu clock
>> kvm-stealtime: cpu 1, msr 2824e880
>>  #2
>> kvm-clock: cpu 2, msr 0:28296841, secondary cpu clock
>> kvm-stealtime: cpu 2, msr 2828e880
>>  #3
>> kvm-clock: cpu 3, msr 0:282d6841, secondary cpu clock
>> kvm-stealtime: cpu 3, msr 282ce880
>>  #4
>> kvm-clock: cpu 4, msr 0:28316841, secondary cpu clock
>> kvm-stealtime: cpu 4, msr 2830e880
>>  #5
>> kvm-clock: cpu 5, msr 0:28356841, secondary cpu clock
>> kvm-stealtime: cpu 5, msr 2834e880
>>  #6
>> kvm-clock: cpu 6, msr 0:28396841, secondary cpu clock
>> kvm-stealtime: cpu 6, msr 2838e880
>>  #7 Ok.
>> kvm-clock: cpu 7, msr 0:283d6841, secondary cpu clock
>> kvm-stealtime: cpu 7, msr 283ce880
>> Brought up 8 CPUs
>> Total of 8 processors activated (42559.96 BogoMIPS).
>> devtmpfs: initialized
>> regulator: core version 0.5
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: Using configuration type 1 for base access
>> bio: create slab  at 0
>>
>> ACPI: Interpreter enabled
>> ACPI: (supports S0 S5)
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: No dock devices found.
>> PCI: Using host bridge windows from ACPI; if necessary, use
>> "pci=nocrs" and report a bug
>> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>> pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>> pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>> pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
>> PCI host bridge to bus 0000:00
>> pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>> pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>> pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
>> pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
>> pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>> ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
>> vgaarb: device added:
>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> vgaarb: loaded
>> vgaarb: bridge control possible 0000:00:02.0
>> SCSI subsystem initialized
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> PCI: Using ACPI for IRQ routing
>> NetLabel: Initializing
>> NetLabel:  domain hash size = 128
>> NetLabel:  protocols = UNLABELED CIPSOv4
>> NetLabel:  unlabeled traffic allowed by default
>> Switching to clocksource kvm-clock
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 7 devices
>> ACPI: ACPI bus type pnp unregistered
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 524288 bind 65536)
>> TCP reno registered
>> NET: Registered protocol family 1
>> pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>> pci 0000:00:01.0: PIIX3: Enabling Passive Release
>> pci 0000:00:01.0: Activating ISA DMA hang workarounds
>> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>> pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) ->
>> IRQ 11
>> pci 0000:00:01.2: PCI INT D disabled
>> Trying to unpack rootfs image as initramfs...
>> Freeing initrd memory: 14178k freed
>> futex hash table entries: 2048 (order: 5, 131072 bytes)
>> audit: initializing netlink socket (disabled)
>> type=2000 audit(1443432753.596:1): initialized
>> HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> VFS: Disk quotas dquot_6.5.2
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> msgmni has been set to 23244
>> alg: No test for stdrng (krng)
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key EE81BF431C03EFE7
>> - User ID: CentOS (Kernel Module GPG key)
>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> acpiphp: Slot [3] registered
>> acpiphp: Slot [4] registered
>> acpiphp: Slot [5] registered
>> acpiphp: Slot [6] registered
>> acpiphp: Slot [7] registered
>> acpiphp: Slot [8] registered
>> acpiphp: Slot [9] registered
>> acpiphp: Slot [10] registered
>> acpiphp: Slot [11] registered
>> acpiphp: Slot [12] registered
>> acpiphp: Slot [13] registered
>> acpiphp: Slot [14] registered
>> acpiphp: Slot [15] registered
>> acpiphp: Slot [16] registered
>> acpiphp: Slot [17] registered
>> acpiphp: Slot [18] registered
>> acpiphp: Slot [19] registered
>> acpiphp: Slot [20] registered
>> acpiphp: Slot [21] registered
>> acpiphp: Slot [22] registered
>> acpiphp: Slot [23] registered
>> acpiphp: Slot [24] registered
>> acpiphp: Slot [25] registered
>> acpiphp: Slot [26] registered
>> acpiphp: Slot [27] registered
>> acpiphp: Slot [28] registered
>> acpiphp: Slot [29] registered
>> acpiphp: Slot [30] registered
>> acpiphp: Slot [31] registered
>> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> ACPI: Power Button [PWRF]
>> [Firmware Bug]: No valid trip found
>> GHES: HEST is not enabled!
>> Non-volatile memory driver v1.3
>> Linux agpgart interface v0.103
>> crash memory driver: version 1.1
>> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> brd: module loaded
>> loop: module loaded
>> input: Macintosh mouse button emulation as
>> /devices/virtual/input/input1
>> Fixed MDIO Bus: probed
>> ehci_hcd: USB 2.0 Enhanced Host Controller (EHCI) Driver
>> ohci_hcd: USB 1.1 Open Host Controller (OHCI) Driver
>> uhci_hcd: USB Universal Host Controller Interface driver
>> uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high)
>> -> IRQ 11
>> uhci_hcd 0000:00:01.2: UHCI Host Controller
>> uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
>> uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb1: Product: UHCI Host Controller
>> usb usb1: Manufacturer: Linux 2.6.32-504.1.3.el6.x86_64 uhci_hcd
>> usb usb1: SerialNumber: 0000:00:01.2
>> usb usb1: configuration #1 chosen from 1 choice
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 2 ports detected
>> PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input2
>> rtc_cmos 00:01: RTC can wake from S4
>> rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>> rtc0: alarms up to one day, 114 bytes nvram
>> cpuidle: using governor ladder
>> cpuidle: using governor menu
>> EFI Variables Facility v0.08 2004-May-17
>> usbcore: registered new interface driver hiddev
>> usbcore: registered new interface driver usbhid
>> usbhid: v2.6:USB HID core driver
>> GRE over IPv4 demultiplexor driver
>> TCP cubic registered
>> Initializing XFRM netlink socket
>> NET: Registered protocol family 17
>> registered taskstats version 1
>> rtc_cmos 00:01: setting system clock to 2015-09-28 09:32:34 UTC
>> (1443432754)
>> Initalizing network drop monitor service
>> Freeing unused kernel memory: 1292k freed
>> Write protecting the kernel read-only data: 10240k
>> Freeing unused kernel memory: 788k freed
>> Freeing unused kernel memory: 1568k freed
>> dracut: dracut-004-356.el6
>> device-mapper: uevent: version 1.0.3
>> device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
>> dm-devel at redhat.com [9]
>>
>> udev: starting version 147
>> dracut: Starting plymouth daemon
>> dracut: rd_NO_MD: removing MD RAID activation
>> scsi0 : ata_piix
>> scsi1 : ata_piix
>> ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14
>> ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15
>> usb 1-1: new full speed USB device number 2 using uhci_hcd
>> Refined TSC clocksource calibration: 2659.872 MHz.
>> usb 1-1: New USB device found, idVendor=0627, idProduct=0001
>> usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
>> usb 1-1: Product: QEMU USB Tablet
>> usb 1-1: Manufacturer: QEMU
>> usb 1-1: SerialNumber: 42
>> usb 1-1: configuration #1 chosen from 1 choice
>> input: QEMU QEMU USB Tablet as
>> /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
>> generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer
>> [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
>> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>> virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level,
>> high) -> IRQ 10
>> virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
>> high) -> IRQ 11
>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>> virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level,
>> high) -> IRQ 10
>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>> virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level,
>> high) -> IRQ 11
>> %G vda: vda1
>> input: ImExPS/2 Generic Explorer Mouse as
>> /devices/platform/i8042/serio1/input/input4
>> EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
>> dracut: Mounted root filesystem /dev/vda1
>> SELinux:  Disabled at runtime.
>> type=1404 audit(1443432755.895:2): selinux=0 auid=4294967295
>> ses=4294967295
>> dracut:
>> dracut: Switching root
>>                 Welcome to CentOS
>> Starting udev: udevd[418]: can not read
>> /etc/udev/rules.d/75-persistent-net-generator.rules
>> udevd[418]: can not read
>> /etc/udev/rules.d/75-persistent-net-generator.rules
>>
>> udev: starting version 147
>> piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
>> %G[  OK  ]
>> Setting hostname localhost.localdomain:  [  OK  ]
>> Checking filesystems
>> Checking all file systems.
>> [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda1
>> /dev/vda1: Superblock last mount time is in the future.
>>         (by less than a day, probably due to the hardware clock
>> being incorrectly set)  FIXED.
>> /dev/vda1: Superblock last write time is in the future.
>>         (by less than a day, probably due to the hardware clock
>> being incorrectly set).  FIXED.
>> /dev/vda1: clean, 17737/524288 files, 221221/2096896 blocks
>> [  OK  ]
>> Remounting root filesystem in read-write mode:  [  OK  ]
>> Mounting local filesystems:  [  OK  ]
>> Enabling /etc/fstab swaps:  [  OK  ]
>> Entering non-interactive startup
>> ip6tables: Applying firewall rules: NET: Registered protocol family 10
>> lo: Disabled Privacy Extensions
>> ip6_tables: (C) 2000-2006 Netfilter Core Team
>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> [  OK  ]
>> iptables: Applying firewall rules: ip_tables: (C) 2000-2006 Netfilter
>> Core Team
>> [  OK  ]
>> Bringing up loopback interface:  [  OK  ]
>> Bringing up interface eth0:
>> Determining IP information for eth0... done.
>> [  OK  ]
>> Bringing up interface eth1:
>> Determining IP information for eth1... done.
>> [  OK  ]
>> Starting auditd: type=1305 audit(1443432770.405:3): audit_pid=1047
>> old=0 auid=4294967295 ses=4294967295 res=1
>> [  OK  ]
>> Starting system logger: [  OK  ]
>> No kdump initial ramdisk found.[WARNING]
>> Rebuilding /boot/initrd-2.6.32-504.1.3.el6.x86_64kdump.img
>> Warning: There might not be enough space to save a vmcore.
>>          The size of UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>> should be greater than 11905052 kilo bytes.
>> Starting kdump:[  OK  ]
>> Mounting filesystems:  [  OK  ]
>> Starting acpi daemon: [  OK  ]
>> Retrigger failed udev events[  OK  ]
>> Starting cloud-init: Cloud-init v. 0.7.5 running init-local at Mon, 28
>> Sep 2015 09:33:15 +0000. Up 41.96 seconds.
>> Starting cloud-init: Cloud-init v. 0.7.5 running init at Mon, 28 Sep
>> 2015 09:33:16 +0000. Up 42.73 seconds.
>> ci-info: +++++++++++++++++++++++++++Net device
>> info+++++++++++++++++++++++++++
>> ci-info:
>> +--------+------+---------------+---------------+-------------------+
>> ci-info: | Device |  Up  |    Address    |      Mask     |
>>     Hw-Address    |
>> ci-info:
>> +--------+------+---------------+---------------+-------------------+
>> ci-info: |   lo   | True |   127.0.0.1   |   255.0.0.0   |
>>     .         |
>> ci-info: |  eth1  | True |  192.168.1.37 | 255.255.255.0 |
>> fa:16:3e:d9:0b:2c |
>> ci-info: |  eth0  | True | 192.168.10.18 | 255.255.255.0 |
>> fa:16:3e:00:f9:7c |
>> ci-info:
>> +--------+------+---------------+---------------+-------------------+
>> ci-info: ++++++++++++++++++++++++++++++++Route
>> info++++++++++++++++++++++++++++++++
>> ci-info:
>>
>> +-------+--------------+-------------+---------------+-----------+-------+
>> ci-info: | Route | Destination  |   Gateway   |    Genmask    |
>> Interface | Flags |
>> ci-info:
>>
>> +-------+--------------+-------------+---------------+-----------+-------+
>> ci-info: |   0   | 192.168.1.0  |   0.0.0.0   | 255.255.255.0 |
>>    eth1   |   U   |
>> ci-info: |   1   | 192.168.10.0 |   0.0.0.0   | 255.255.255.0 |
>>  eth0   |   U   |
>> ci-info: |   2   |   0.0.0.0    | 192.168.1.1 |    0.0.0.0
>>  |    eth1   |   UG  |
>> ci-info:
>>
>> +-------+--------------+-------------+---------------+-----------+-------+
>> Starting cloud-init: Cloud-init v. 0.7.5 running modules:config at
>> Mon, 28 Sep 2015 09:33:18 +0000. Up 45.57 seconds.
>> Starting cloud-init: Cloud-init v. 0.7.5 running modules:final at Mon,
>> 28 Sep 2015 09:33:20 +0000. Up 47.34 seconds.
>> ci-info: +++++++++Authorized keys from
>> /home/centos/.ssh/authorized_keys for user centos++++++++++
>> ci-info:
>>
>>
>> +---------+-------------------------------------------------+---------+-------------------+
>> ci-info: | Keytype |                Fingerprint (md5)
>>          | Options |      Comment      |
>> ci-info:
>>
>>
>> +---------+-------------------------------------------------+---------+-------------------+
>> ci-info: | ssh-rsa | 45:f2:6d:21:c7:3c:22:f3:f1:54:8c:0a:38:22:67:7b |
>>    -    | Generated-by-Nova |
>> ci-info:
>>
>>
>> +---------+-------------------------------------------------+---------+-------------------+
>> ec2:
>> ec2: #############################################################
>> ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
>> ec2: 1024 50:a6:7c:76:63:c6:05:2f:9b:fa:a5:2b:f9:1b:77:4f
>> /etc/ssh/ssh_host_dsa_key.pub (DSA)
>> ec2: 2048 f9:f7:13:ce:76:fa:e5:d2:88:5e:8e:ff:b4:e8:74:3c
>> /etc/ssh/ssh_host_key.pub (RSA1)
>> ec2: 2048 61:c1:89:02:b6:55:60:57:b4:86:5f:90:f2:f5:c8:2f
>> /etc/ssh/ssh_host_rsa_key.pub (RSA)
>> ec2: -----END SSH HOST KEY FINGERPRINTS-----
>> ec2: #############################################################
>> -----BEGIN SSH HOST KEY KEYS-----
>> Trimmed
>> -----END SSH HOST KEY KEYS-----
>> Cloud-init v. 0.7.5 finished at Mon, 28 Sep 2015 09:33:21 +0000.
>> Datasource DataSourceOpenStack [net,ver=2].  Up 47.78 seconds
>> Starting postfix: [  OK  ]
>> Starting crond: [  OK  ]
>> 50+0 records in
>> 50+0 records out
>> 25600 bytes (26 kB) copied, 0.00601752 s, 4.3 MB/s
>> Changing password for user root.
>> passwd: all authentication tokens updated successfully.
>> Locking password for user root.
>> passwd: Success
>>
>> CentOS release 6.6 (Final)
>> Kernel 2.6.32-504.1.3.el6.x86_64 on an x86_64
>>
>> cmp1 login:
>>
>> On Mon, Sep 28, 2015 at 10:48 AM, Nasir Mahmood  wrote:
>>
>> Ok.. I see that a 500 Gb  disk is allotted  to the VM instance but
>>> it doesnt show anything beyond 20 Gigs.  This instance along with
>>> many others booted up with metadata ,but ( I just recalled that my
>>> VMs dont get metadata successfully during very first boot and this
>>> may be the cause of this nonsense. what I have to do is I have to
>>> reboot the vm twice to make it ready for the OpenStack Env. like
>>> correct interfaces, hostname, etc. ) ok..
>>>
>>> Let me get back to you guys with updates on a new VM ...
>>>
>>> On Fri, Sep 25, 2015 at 8:17 AM, Nasir Mahmood wrote:
>>>
>>> Mike,
>>>>
>>>> I was expecting that the disk should grow with usage,  which
>>>> didnt happen after I tried to create a 40gb file using dd command.
>>>>
>>>>
>>>> I dont know how to increase the disk partition after booting up
>>>> the instance.
>>>>
>>>> On 24 Sep 2015 23:58, "Mike Smith" wrote:
>>>>
>>>> I wonder if your disk image has a partition set to 20GB.  Your
>>>>> instance may get a bigger disk, but the partition is still set
>>>>> to 20G.   Try running an “fdisk -l” or something inside the
>>>>> VM to see if the disk itself is actually bigger than the
>>>>> partition you are seeing
>>>>>
>>>>> There are cloud init scripts that resize these for you, or Kilo
>>>>> has an provisioning-time option to make the disk automatically
>>>>> resize
>>>>>
>>>>> Mike Smith
>>>>> Principal Engineer / Cloud Team Lead
>>>>> Overstock.com [5]
>>>>>
>>>>> On Sep 24, 2015, at 12:44 PM, Nasir Mahmood wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> My openstack KILO version installation is almost production
>>>>>> level now,  with 3 compute nodes.
>>>>>>
>>>>>> On a recently added compute node with plenty of disk space, I
>>>>>> have tried to add a new flavor with 8 cores, 16 gb ram and 500
>>>>>> gb hard disk space. The instance spins up, but with 20 gb of
>>>>>> disk space only, as it happens on others Compute nodes.  This
>>>>>> new Compute node has a single partition of 3 tb on an  hw
>>>>>> raid .
>>>>>>
>>>>>> Any idea..
>>>>>> Regards,
>>>>>> Nasir _______________________________________________
>>>>>> Mailing list:
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>> [2]
>>>>>> Post to     : openstack at lists.openstack.org [3]
>>>>>> Unsubscribe :
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>> [4]
>>>>>>
>>>>>
>>>>> -------------------------
>>>>>
>>>>> CONFIDENTIALITY NOTICE: This message is intended only for the
>>>>> use and review of the individual or entity to which it is
>>>>> addressed and may contain information that is privileged and
>>>>> confidential. If the reader of this message is not the intended
>>>>> recipient, or the employee or agent responsible for delivering
>>>>> the message solely to the intended recipient, you are hereby
>>>>> notified that any dissemination, distribution or copying of this
>>>>> communication is strictly prohibited. If you have received this
>>>>> communication in error, please notify sender immediately by
>>>>> telephone or return email. Thank you.
>>>>>
>>>>
>>> --
>>>
>>> Nasir Mahmood
>>>
>>
>> --
>>
>> Nasir Mahmood
>>
>>
>> Links:
>> ------
>> [1] mailto:nasir.mahmood at gmail.com
>> [2] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> [3] mailto:openstack at lists.openstack.org
>> [4] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> [5] http://Overstock.com
>> [6] mailto:mismith at overstock.com
>> [7] mailto:nasir.mahmood at gmail.com
>> [8] mailto:mockbuild at c6b9.bsys.dev.centos.org
>> [9] mailto:dm-devel at redhat.com
>> [10] mailto:nasir.mahmood at gmail.com
>>
>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>



-- 
Nasir Mahmood
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150928/68396d3a/attachment.html>


More information about the Openstack mailing list