[Openstack] KILO -- Max disk size is 20 gb
Georgios Dimitrakakis
giorgis at acmac.uoc.gr
Mon Sep 28 13:01:24 UTC 2015
I am very glad that is working for you now :-)
Best,
G.
On Mon, 28 Sep 2015 17:30:33 +0500, Nasir Mahmood wrote:
> Yes, Georgios,
>
> very True.. Im following the same thing and its working now...default
> OpenStack images dont come with these tools and need to be installed
> and then use the snapshot...right
>
> On Mon, Sep 28, 2015 at 4:10 PM, Georgios Dimitrakakis wrote:
>
>> I remember having a similar problem with an older CentOS image.
>>
>> The steps I did to correct it were the following:
>>
>> 1) Updated to the latest version
>> yum update
>>
>> 2) Installed (if not installed) cloud-init, cloud-utils,
>> dracut-modules-growroot
>> yum install cloud-init cloud-utils dracut-modules-growroot
>>
>> 3) Rebuild the initramfs to use the latest installed dracut module
>> dracut --force
>>
>> Shutoff the machine and create a snapshot of it. Use this snapshot
>> to bui
>>
>>> hi All,
>>>
>>> I have
>>>
>>> 1) downloaded a brand new CentOs 6.7 QCOW2 image from Centos
>>> Repo.
>>>
>>> 2) spinned up the VM -- it worked like a charm
>>>
>>> 3) disk is still showing 7.8 GB in Size -- whereas I have
>>> allocated a
>>> 500 GB to this VM. below is output from the fdisk -l.
>>>
>>> 4) I dont see any error logs in cloud-init messages. Everything
>>> seems
>>>
>>> perfect while booting up.
>>>
>>> [root at cmp1 ~]# df -h
>>> Filesystem Size Used Avail Use% Mounted on
>>> /dev/vda1 7.8G 613M 6.8G 9% /
>>> tmpfs 5.7G 0 5.7G 0% /dev/shm
>>> [root at cmp1 ~]#
>>>
>>> [root at cmp1 ~] # fdisk -l
>>>
>>> Disk /dev/vda: 536.9 GB, 536870912000 bytes
>>> 255 heads, 63 sectors/track, 65270 cylinders
>>> Units = cylinders of 16065 * 512 = 8225280 bytes
>>> Sector size (logical/physical): 512 bytes / 512 bytes
>>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>>> Disk identifier: 0x000574cf
>>>
>>> Device Boot Start End Blocks
>>> Id
>>> System
>>> /dev/vda1 * 1 1045 8387584
>>> 83
>>> Linux
>>> [root at cmp1 ~]
>>>
>>> complete boot-logs are given below:
>>>
>>>
>>
>
> -----------------------------------------------------------------------------------------------------------------
>>>
>>> nova console-log CMP1
>>> Press any key to continue.
>>> [H[J
>>> GNU GRUB version 0.97 (639K lower / 3144692K upper
>>> memory)
>>>
>>>
>>
>
> [m[4;2H+-------------------------------------------------------------------------+[5;2H|[5;76H|[6;2H|[6;76H|[7;2H|[7;76H|[8;2H|[8;76H|[9;2H|[9;76H|[10;2H|[10;76H|[11;2H|[11;76H|[12;2H|[12;76H|[13;2H|[13;76H|[14;2H|[14;76H|[15;2H|[15;76H|[16;2H|[16;76H|[17;2H+-------------------------------------------------------------------------+[m
>>> Use the ^ and v keys to select which entry is
>>> highlighted.
>>> Press enter to boot the selected OS, e to edit the
>>> commands before booting, a to modify the kernel
>>> arguments
>>> before booting, or c for a command-line.[5;78H
>>> [m[7m[5;3H
>>> CentOS 6 (2.6.32-504.1.3.el6.x86_64)
>>>
>>> [5;75H[m[m[6;3H
>>>
>>>
>>>
>>> [6;75H[m[m[7;3H
>>>
>>>
>>> [7;75H[m[m[8;3H
>>>
>>>
>>> [8;75H[m[m[9;3H
>>>
>>>
>>> [9;75H[m[m[10;3H
>>>
>>>
>>>
>>> [10;75H[m[m[11;3H
>>>
>>>
>>>
>>> [11;75H[m[m[12;3H
>>>
>>>
>>>
>>> [12;75H[m[m[13;3H
>>>
>>>
>>> [13;75H[m[m[14;3H
>>>
>>>
>>> [14;75H[m[m[15;3H
>>>
>>>
>>> [15;75H[m[m[16;3H
>>>
>>>
>>> [16;75H[m[16;78H [5;75H[23;4HThe highlighted entry will be booted
>>> automatically in 1 seconds. [5;75H[H[JInitializing cgroup
>>> subsys
>>> cpuset
>>> Initializing cgroup subsys cpu
>>> Linux version 2.6.32-504.1.3.el6.x86_64
>>> (mockbuild at c6b9.bsys.dev.centos.org [4] [8]) (gcc version 4.4.7
>>> 20120313
>>>
>>> (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Nov 11 17:57:25 UTC 2014
>>> Command line: ro root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>>> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD
>>> console=ttyS0,115200
>>> crashkernel=auto SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc
>>> KEYTABLE=us rd_NO_DM
>>> KERNEL supported cpus:
>>> Intel GenuineIntel
>>> AMD AuthenticAMD
>>> Centaur CentaurHauls
>>> BIOS-provided physical RAM map:
>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>> BIOS-e820: 0000000000100000 - 00000000bfffd000 (usable)
>>> BIOS-e820: 00000000bfffd000 - 00000000c0000000 (reserved)
>>> BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
>>> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>>> BIOS-e820: 0000000100000000 - 000000032e000000 (usable)
>>> DMI 2.4 present.
>>> SMBIOS version 2.4 @ 0xF1F90
>>> Hypervisor detected: KVM
>>> last_pfn = 0x32e000 max_arch_pfn = 0x400000000
>>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>>> last_pfn = 0xbfffd max_arch_pfn = 0x400000000
>>> Using GB pages for direct mapping
>>> init_memory_mapping: 0000000000000000-00000000bfffd000
>>> init_memory_mapping: 0000000100000000-000000032e000000
>>> RAMDISK: 37217000 - 37fefb6b
>>> ACPI: RSDP 00000000000f1f60 00014 (v00 BOCHS )
>>> ACPI: RSDT 00000000bffffa7a 00030 (v01 BOCHS BXPCRSDT 00000001
>>> BXPC
>>> 00000001)
>>> ACPI: FACP 00000000bfffee77 00074 (v01 BOCHS BXPCFACP 00000001
>>> BXPC
>>> 00000001)
>>> ACPI: DSDT 00000000bfffdd40 01137 (v01 BXPC BXDSDT 00000001
>>> INTL
>>> 20140926)
>>> ACPI: FACS 00000000bfffdd00 00040
>>> ACPI: SSDT 00000000bfffeeeb 00ADF (v01 BOCHS BXPCSSDT 00000001
>>> BXPC
>>> 00000001)
>>> ACPI: APIC 00000000bffff9ca 000B0 (v01 BOCHS BXPCAPIC 00000001
>>> BXPC
>>> 00000001)
>>> Setting APIC routing to flat.
>>> No NUMA configuration found
>>> Faking a node at 0000000000000000-000000032e000000
>>> Bootmem setup node 0 0000000000000000-000000032e000000
>>> NODE_DATA [000000000000b000 - 000000000003efff]
>>> bootmap [0000000000100000 - 0000000000165bff] pages 66
>>> (8 early reservations) ==> bootmem [0000000000 - 032e000000]
>>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
>>> -
>>> 0000001000]
>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==>
>>> [0000006000 -
>>> 0000008000]
>>> #2 [0001000000 - 000202abe4] TEXT DATA BSS ==>
>>> [0001000000 -
>>> 000202abe4]
>>> #3 [0037217000 [5] - 0037fefb6b] RAMDISK ==>
>>> [0037217000 [6]
>>> - 0037fefb6b]
>>> #4 [000009fc00 - 0000100000] BIOS reserved ==>
>>> [000009fc00 -
>>> 0000100000]
>>> #5 [000202b000 - 000202b0dd] BRK ==>
>>> [000202b000 - 000202b0dd]
>>> #6 [0000008000 - 000000a000] PGTABLE ==>
>>> [0000008000
>>> - 000000a000]
>>> #7 [000000a000 - 000000b000] PGTABLE ==>
>>> [000000a000
>>> - 000000b000]
>>> found SMP MP-table at [ffff8800000f1fb0] f1fb0
>>> Reserving 129MB of memory at 48MB for crashkernel (System RAM:
>>> 13024MB)
>>> kvm-clock: Using msrs 4b564d01 and 4b564d00
>>> kvm-clock: cpu 0, msr 0:1c28841, boot clock
>>> Zone PFN ranges:
>>> DMA 0x00000001 -> 0x00001000
>>> DMA32 0x00001000 -> 0x00100000
>>> Normal 0x00100000 -> 0x0032e000
>>> Movable zone start PFN for each node
>>> early_node_map[3] active PFN ranges
>>> 0: 0x00000001 -> 0x0000009f
>>> 0: 0x00000100 -> 0x000bfffd
>>> 0: 0x00100000 -> 0x0032e000
>>> ACPI: PM-Timer IO Port: 0x608
>>> Setting APIC routing to flat.
>>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>>> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>>> ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>>> IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>>> Using ACPI (MADT) for SMP configuration information
>>> SMP: Allowing 8 CPUs, 0 hotplug CPUs
>>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>>> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>>> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>>> PM: Registered nosave memory: 00000000bfffd000 - 00000000c0000000
>>> PM: Registered nosave memory: 00000000c0000000 - 00000000feffc000
>>> PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
>>> PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
>>> PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
>>> Allocating PCI resources starting at c0000000 (gap:
>>> c0000000:3effc000)
>>> Booting paravirtualized kernel on KVM
>>> NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>>> PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192
>>> d23720
>>> u262144
>>> pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
>>> pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>>> kvm-clock: cpu 0, msr 0:28216841, primary cpu clock
>>> kvm-stealtime: cpu 0, msr 2820e880
>>> Built 1 zonelists in Zone order, mobility grouping on. Total
>>> pages:
>>> 3026213
>>> Policy zone: Normal
>>> Kernel command line: ro
>>> root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>>> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD
>>> console=ttyS0,115200
>>> crashkernel=129M at 0M SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc
>>> KEYTABLE=us rd_NO_DM
>>> PID hash table entries: 4096 (order: 3, 32768 bytes)
>>> Checking aperture...
>>> No AGP bridge found
>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>> Placing 64MB software IO TLB between ffff880020000000 -
>>> ffff880024000000
>>> software IO TLB at phys 0x20000000 - 0x24000000
>>> Memory: 11887224k/13336576k available (5336k kernel code,
>>> 1048980k
>>> absent, 400372k reserved, 7016k data, 1292k init)
>>> Hierarchical RCU implementation.
>>> NR_IRQS:33024 nr_irqs:472
>>> Console: colour VGA+ 80x25
>>> console [ttyS0] enabled
>>> allocated 49283072 bytes of page_cgroup
>>> please try cgroup_disable=memory option if you dont want memory
>>>
>>> cgroups
>>> Detected 2659.998 MHz processor.
>>> Calibrating delay loop (skipped) preset value.. 5319.99 BogoMIPS
>>> (lpj=2659998)
>>> pid_max: default: 32768 minimum: 301
>>> Security Framework initialized
>>> SELinux: Initializing.
>>> Dentry cache hash table entries: 2097152 (order: 12, 16777216
>>> bytes)
>>> Inode-cache hash table entries: 1048576 (order: 11, 8388608
>>> bytes)
>>> Mount-cache hash table entries: 256
>>> Initializing cgroup subsys ns
>>> Initializing cgroup subsys cpuacct
>>> Initializing cgroup subsys memory
>>> Initializing cgroup subsys devices
>>> Initializing cgroup subsys freezer
>>> Initializing cgroup subsys net_cls
>>> Initializing cgroup subsys blkio
>>> Initializing cgroup subsys perf_event
>>> Initializing cgroup subsys net_prio
>>> mce: CPU supports 10 MCE banks
>>> alternatives: switching to unfair spinlock
>>> ACPI: Core revision 20090903
>>> ftrace: converting mcount calls to 0f 1f 44 00 00
>>> ftrace: allocating 21917 entries in 86 pages
>>> Enabling x2apic
>>> Enabled x2apic
>>> APIC routing finalized to physical x2apic.
>>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>>> Performance Events: unsupported p6 CPU model 44 no PMU driver,
>>> software events only.
>>> NMI watchdog disabled (cpu0): hardware events not enabled
>>> Booting Node 0, Processors #1
>>> kvm-clock: cpu 1, msr 0:28256841, secondary cpu clock
>>> kvm-stealtime: cpu 1, msr 2824e880
>>> #2
>>> kvm-clock: cpu 2, msr 0:28296841, secondary cpu clock
>>> kvm-stealtime: cpu 2, msr 2828e880
>>> #3
>>> kvm-clock: cpu 3, msr 0:282d6841, secondary cpu clock
>>> kvm-stealtime: cpu 3, msr 282ce880
>>> #4
>>> kvm-clock: cpu 4, msr 0:28316841, secondary cpu clock
>>> kvm-stealtime: cpu 4, msr 2830e880
>>> #5
>>> kvm-clock: cpu 5, msr 0:28356841, secondary cpu clock
>>> kvm-stealtime: cpu 5, msr 2834e880
>>> #6
>>> kvm-clock: cpu 6, msr 0:28396841, secondary cpu clock
>>> kvm-stealtime: cpu 6, msr 2838e880
>>> #7 Ok.
>>> kvm-clock: cpu 7, msr 0:283d6841, secondary cpu clock
>>> kvm-stealtime: cpu 7, msr 283ce880
>>> Brought up 8 CPUs
>>> Total of 8 processors activated (42559.96 BogoMIPS).
>>> devtmpfs: initialized
>>> regulator: core version 0.5
>>> NET: Registered protocol family 16
>>> ACPI: bus type pci registered
>>> PCI: Using configuration type 1 for base access
>>> bio: create slab at 0
>>>
>>> ACPI: Interpreter enabled
>>> ACPI: (supports S0 S5)
>>> ACPI: Using IOAPIC for interrupt routing
>>> ACPI: No dock devices found.
>>> PCI: Using host bridge windows from ACPI; if necessary, use
>>> "pci=nocrs" and report a bug
>>> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>>> pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
>>> pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
>>> pci_root PNP0A03:00: host bridge window [mem
>>> 0x000a0000-0x000bffff]
>>> pci_root PNP0A03:00: host bridge window [mem
>>> 0xc0000000-0xfebfffff]
>>> PCI host bridge to bus 0000:00
>>> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>>> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>>> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>>> pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
>>> pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4
>>> ACPI
>>> pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4
>>> SMB
>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>>> ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
>>> vgaarb: device added:
>>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>>> vgaarb: loaded
>>> vgaarb: bridge control possible 0000:00:02.0
>>> SCSI subsystem initialized
>>> usbcore: registered new interface driver usbfs
>>> usbcore: registered new interface driver hub
>>> usbcore: registered new device driver usb
>>> PCI: Using ACPI for IRQ routing
>>> NetLabel: Initializing
>>> NetLabel: domain hash size = 128
>>> NetLabel: protocols = UNLABELED CIPSOv4
>>> NetLabel: unlabeled traffic allowed by default
>>> Switching to clocksource kvm-clock
>>> pnp: PnP ACPI init
>>> ACPI: bus type pnp registered
>>> pnp: PnP ACPI: found 7 devices
>>> ACPI: ACPI bus type pnp unregistered
>>> NET: Registered protocol family 2
>>> IP route cache hash table entries: 524288 (order: 10, 4194304
>>> bytes)
>>> TCP established hash table entries: 524288 (order: 11, 8388608
>>> bytes)
>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>> TCP: Hash tables configured (established 524288 bind 65536)
>>> TCP reno registered
>>> NET: Registered protocol family 1
>>> pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>>> pci 0000:00:01.0: PIIX3: Enabling Passive Release
>>> pci 0000:00:01.0: Activating ISA DMA hang workarounds
>>> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>>> pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high)
>>> ->
>>> IRQ 11
>>> pci 0000:00:01.2: PCI INT D disabled
>>> Trying to unpack rootfs image as initramfs...
>>> Freeing initrd memory: 14178k freed
>>> futex hash table entries: 2048 (order: 5, 131072 bytes)
>>> audit: initializing netlink socket (disabled)
>>> type=2000 audit(1443432753.596:1): initialized
>>> HugeTLB registered 2 MB page size, pre-allocated 0 pages
>>> VFS: Disk quotas dquot_6.5.2
>>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>>> msgmni has been set to 23244
>>> alg: No test for stdrng (krng)
>>> ksign: Installing public key data
>>> Loading keyring
>>> - Added public key EE81BF431C03EFE7
>>> - User ID: CentOS (Kernel Module GPG key)
>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major
>>> 251)
>>> io scheduler noop registered
>>> io scheduler anticipatory registered
>>> io scheduler deadline registered
>>> io scheduler cfq registered (default)
>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>>> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>>> acpiphp: Slot [3] registered
>>> acpiphp: Slot [4] registered
>>> acpiphp: Slot [5] registered
>>> acpiphp: Slot [6] registered
>>> acpiphp: Slot [7] registered
>>> acpiphp: Slot [8] registered
>>> acpiphp: Slot [9] registered
>>> acpiphp: Slot [10] registered
>>> acpiphp: Slot [11] registered
>>> acpiphp: Slot [12] registered
>>> acpiphp: Slot [13] registered
>>> acpiphp: Slot [14] registered
>>> acpiphp: Slot [15] registered
>>> acpiphp: Slot [16] registered
>>> acpiphp: Slot [17] registered
>>> acpiphp: Slot [18] registered
>>> acpiphp: Slot [19] registered
>>> acpiphp: Slot [20] registered
>>> acpiphp: Slot [21] registered
>>> acpiphp: Slot [22] registered
>>> acpiphp: Slot [23] registered
>>> acpiphp: Slot [24] registered
>>> acpiphp: Slot [25] registered
>>> acpiphp: Slot [26] registered
>>> acpiphp: Slot [27] registered
>>> acpiphp: Slot [28] registered
>>> acpiphp: Slot [29] registered
>>> acpiphp: Slot [30] registered
>>> acpiphp: Slot [31] registered
>>> input: Power Button as
>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>>> ACPI: Power Button [PWRF]
>>> [Firmware Bug]: No valid trip found
>>> GHES: HEST is not enabled!
>>> Non-volatile memory driver v1.3
>>> Linux agpgart interface v0.103
>>> crash memory driver: version 1.1
>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>>> ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>> 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>> brd: module loaded
>>> loop: module loaded
>>> input: Macintosh mouse button emulation as
>>> /devices/virtual/input/input1
>>> Fixed MDIO Bus: probed
>>> ehci_hcd: USB 2.0 Enhanced Host Controller (EHCI) Driver
>>> ohci_hcd: USB 1.1 Open Host Controller (OHCI) Driver
>>> uhci_hcd: USB Universal Host Controller Interface driver
>>> uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level,
>>> high)
>>> -> IRQ 11
>>> uhci_hcd 0000:00:01.2: UHCI Host Controller
>>> uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
>>> number 1
>>> uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
>>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>>> usb usb1: New USB device strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> usb usb1: Product: UHCI Host Controller
>>> usb usb1: Manufacturer: Linux 2.6.32-504.1.3.el6.x86_64 uhci_hcd
>>> usb usb1: SerialNumber: 0000:00:01.2
>>> usb usb1: configuration #1 chosen from 1 choice
>>> hub 1-0:1.0: USB hub found
>>> hub 1-0:1.0: 2 ports detected
>>> PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq
>>> 1,12
>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>> mice: PS/2 mouse device common for all mice
>>> input: AT Translated Set 2 keyboard as
>>> /devices/platform/i8042/serio0/input/input2
>>> rtc_cmos 00:01: RTC can wake from S4
>>> rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>>> rtc0: alarms up to one day, 114 bytes nvram
>>> cpuidle: using governor ladder
>>> cpuidle: using governor menu
>>> EFI Variables Facility v0.08 2004-May-17
>>> usbcore: registered new interface driver hiddev
>>> usbcore: registered new interface driver usbhid
>>> usbhid: v2.6:USB HID core driver
>>> GRE over IPv4 demultiplexor driver
>>> TCP cubic registered
>>> Initializing XFRM netlink socket
>>> NET: Registered protocol family 17
>>> registered taskstats version 1
>>> rtc_cmos 00:01: setting system clock to 2015-09-28 09:32:34 UTC
>>> (1443432754)
>>> Initalizing network drop monitor service
>>> Freeing unused kernel memory: 1292k freed
>>> Write protecting the kernel read-only data: 10240k
>>> Freeing unused kernel memory: 788k freed
>>> Freeing unused kernel memory: 1568k freed
>>> dracut: dracut-004-356.el6
>>> device-mapper: uevent: version 1.0.3
>>> device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
>>> dm-devel at redhat.com [7] [9]
>>>
>>> udev: starting version 147
>>> dracut: Starting plymouth daemon
>>> dracut: rd_NO_MD: removing MD RAID activation
>>> scsi0 : ata_piix
>>> scsi1 : ata_piix
>>> ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14
>>> ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15
>>> usb 1-1: new full speed USB device number 2 using uhci_hcd
>>> Refined TSC clocksource calibration: 2659.872 MHz.
>>> usb 1-1: New USB device found, idVendor=0627, idProduct=0001
>>> usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
>>> usb 1-1: Product: QEMU USB Tablet
>>> usb 1-1: Manufacturer: QEMU
>>> usb 1-1: SerialNumber: 42
>>> usb 1-1: configuration #1 chosen from 1 choice
>>> input: QEMU QEMU USB Tablet as
>>> /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
>>> generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
>>> Pointer
>>> [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
>>> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>>> virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10
>>> (level,
>>> high) -> IRQ 10
>>> virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11
>>> (level,
>>> high) -> IRQ 11
>>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>>> virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10
>>> (level,
>>> high) -> IRQ 10
>>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>>> virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11
>>> (level,
>>> high) -> IRQ 11
>>> %G vda: vda1
>>> input: ImExPS/2 Generic Explorer Mouse as
>>> /devices/platform/i8042/serio1/input/input4
>>> EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
>>> dracut: Mounted root filesystem /dev/vda1
>>> SELinux: Disabled at runtime.
>>> type=1404 audit(1443432755.895:2): selinux=0 auid=4294967295
>>> ses=4294967295
>>> dracut:
>>> dracut: Switching root
>>> Welcome to CentOS
>>> Starting udev: udevd[418]: can not read
>>> /etc/udev/rules.d/75-persistent-net-generator.rules
>>> udevd[418]: can not read
>>> /etc/udev/rules.d/75-persistent-net-generator.rules
>>>
>>> udev: starting version 147
>>> piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700,
>>> revision 0
>>> %G[ OK ]
>>> Setting hostname localhost.localdomain: [ OK ]
>>> Checking filesystems
>>> Checking all file systems.
>>> [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda1
>>> /dev/vda1: Superblock last mount time is in the future.
>>> (by less than a day, probably due to the hardware
>>> clock
>>> being incorrectly set) FIXED.
>>> /dev/vda1: Superblock last write time is in the future.
>>> (by less than a day, probably due to the hardware
>>> clock
>>> being incorrectly set). FIXED.
>>> /dev/vda1: clean, 17737/524288 files, 221221/2096896 blocks
>>> [ OK ]
>>> Remounting root filesystem in read-write mode: [ OK ]
>>> Mounting local filesystems: [ OK ]
>>> Enabling /etc/fstab swaps: [ OK ]
>>> Entering non-interactive startup
>>> ip6tables: Applying firewall rules: NET: Registered protocol
>>> family 10
>>> lo: Disabled Privacy Extensions
>>> ip6_tables: (C) 2000-2006 Netfilter Core Team
>>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>>> [ OK ]
>>> iptables: Applying firewall rules: ip_tables: (C) 2000-2006
>>> Netfilter
>>> Core Team
>>> [ OK ]
>>> Bringing up loopback interface: [ OK ]
>>> Bringing up interface eth0:
>>> Determining IP information for eth0... done.
>>> [ OK ]
>>> Bringing up interface eth1:
>>> Determining IP information for eth1... done.
>>> [ OK ]
>>> Starting auditd: type=1305 audit(1443432770.405:3):
>>> audit_pid=1047
>>> old=0 auid=4294967295 ses=4294967295 res=1
>>> [ OK ]
>>> Starting system logger: [ OK ]
>>> No kdump initial ramdisk found.[WARNING]
>>> Rebuilding /boot/initrd-2.6.32-504.1.3.el6.x86_64kdump.img
>>> Warning: There might not be enough space to save a vmcore.
>>> The size of
>>> UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
>>> should be greater than 11905052 kilo bytes.
>>> Starting kdump:[ OK ]
>>> Mounting filesystems: [ OK ]
>>> Starting acpi daemon: [ OK ]
>>> Retrigger failed udev events[ OK ]
>>> Starting cloud-init: Cloud-init v. 0.7.5 running init-local at
>>> Mon, 28
>>> Sep 2015 09:33:15 +0000. Up 41.96 seconds.
>>> Starting cloud-init: Cloud-init v. 0.7.5 running init at Mon, 28
>>> Sep
>>> 2015 09:33:16 +0000. Up 42.73 seconds.
>>> ci-info: +++++++++++++++++++++++++++Net device
>>> info+++++++++++++++++++++++++++
>>> ci-info:
>>>
>>
> +--------+------+---------------+---------------+-------------------+
>>> ci-info: | Device | Up | Address | Mask
>>> |
>>> Hw-Address |
>>> ci-info:
>>>
>>
> +--------+------+---------------+---------------+-------------------+
>>> ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 |
>>>
>>> . |
>>> ci-info: | eth1 | True | 192.168.1.37 | 255.255.255.0 |
>>> fa:16:3e:d9:0b:2c |
>>> ci-info: | eth0 | True | 192.168.10.18 | 255.255.255.0 |
>>> fa:16:3e:00:f9:7c |
>>> ci-info:
>>>
>>
> +--------+------+---------------+---------------+-------------------+
>>> ci-info: ++++++++++++++++++++++++++++++++Route
>>> info++++++++++++++++++++++++++++++++
>>> ci-info:
>>>
>>>
>>
>
> +-------+--------------+-------------+---------------+-----------+-------+
>>> ci-info: | Route | Destination | Gateway | Genmask
>>> |
>>> Interface | Flags |
>>> ci-info:
>>>
>>>
>>
>
> +-------+--------------+-------------+---------------+-----------+-------+
>>> ci-info: | 0 | 192.168.1.0 | 0.0.0.0 |
>>> 255.255.255.0 |
>>> eth1 | U |
>>> ci-info: | 1 | 192.168.10.0 | 0.0.0.0 | 255.255.255.0
>>> |
>>> eth0 | U |
>>> ci-info: | 2 | 0.0.0.0 | 192.168.1.1 | 0.0.0.0
>>>
>>> | eth1 | UG |
>>> ci-info:
>>>
>>>
>>
>
> +-------+--------------+-------------+---------------+-----------+-------+
>>> Starting cloud-init: Cloud-init v. 0.7.5 running modules:config
>>> at
>>> Mon, 28 Sep 2015 09:33:18 +0000. Up 45.57 seconds.
>>> Starting cloud-init: Cloud-init v. 0.7.5 running modules:final at
>>> Mon,
>>> 28 Sep 2015 09:33:20 +0000. Up 47.34 seconds.
>>> ci-info: +++++++++Authorized keys from
>>> /home/centos/.ssh/authorized_keys for user centos++++++++++
>>> ci-info:
>>>
>>>
>>
>
> +---------+-------------------------------------------------+---------+-------------------+
>>> ci-info: | Keytype | Fingerprint (md5)
>>>
>>> | Options | Comment |
>>> ci-info:
>>>
>>>
>>
>
> +---------+-------------------------------------------------+---------+-------------------+
>>> ci-info: | ssh-rsa |
>>> 45:f2:6d:21:c7:3c:22:f3:f1:54:8c:0a:38:22:67:7b |
>>> - | Generated-by-Nova |
>>> ci-info:
>>>
>>>
>>
>
> +---------+-------------------------------------------------+---------+-------------------+
>>> ec2:
>>> ec2:
>>> #############################################################
>>> ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
>>> ec2: 1024 50:a6:7c:76:63:c6:05:2f:9b:fa:a5:2b:f9:1b:77:4f
>>> /etc/ssh/ssh_host_dsa_key.pub (DSA)
>>> ec2: 2048 f9:f7:13:ce:76:fa:e5:d2:88:5e:8e:ff:b4:e8:74:3c
>>> /etc/ssh/ssh_host_key.pub (RSA1)
>>> ec2: 2048 61:c1:89:02:b6:55:60:57:b4:86:5f:90:f2:f5:c8:2f
>>> /etc/ssh/ssh_host_rsa_key.pub (RSA)
>>> ec2: -----END SSH HOST KEY FINGERPRINTS-----
>>> ec2:
>>> #############################################################
>>> -----BEGIN SSH HOST KEY KEYS-----
>>> Trimmed
>>> -----END SSH HOST KEY KEYS-----
>>> Cloud-init v. 0.7.5 finished at Mon, 28 Sep 2015 09:33:21 +0000.
>>> Datasource DataSourceOpenStack [net,ver=2]. Up 47.78 seconds
>>> Starting postfix: [ OK ]
>>> Starting crond: [ OK ]
>>> 50+0 records in
>>> 50+0 records out
>>> 25600 bytes (26 kB) copied, 0.00601752 s, 4.3 MB/s
>>> Changing password for user root.
>>> passwd: all authentication tokens updated successfully.
>>> Locking password for user root.
>>> passwd: Success
>>>
>>> CentOS release 6.6 (Final)
>>> Kernel 2.6.32-504.1.3.el6.x86_64 on an x86_64
>>>
>>> cmp1 login:
>>>
>>> On Mon, Sep 28, 2015 at 10:48 AM, Nasir Mahmood wrote:
>>>
>>>> Ok.. I see that a 500 Gb disk is allotted to the VM
>>>> instance but
>>>> it doesnt show anything beyond 20 Gigs. This instance along
>>>> with
>>>> many others booted up with metadata ,but ( I just recalled that
>>>> my
>>>> VMs dont get metadata successfully during very first boot and
>>>> this
>>>> may be the cause of this nonsense. what I have to do is I have
>>>> to
>>>> reboot the vm twice to make it ready for the OpenStack Env.
>>>> like
>>>> correct interfaces, hostname, etc. ) ok..
>>>>
>>>> Let me get back to you guys with updates on a new VM ...
>>>>
>>>> On Fri, Sep 25, 2015 at 8:17 AM, Nasir Mahmood wrote:
>>>>
>>>>> Mike,
>>>>>
>>>>> I was expecting that the disk should grow with usage, which
>>>>> didnt happen after I tried to create a 40gb file using dd
>>>>> command.
>>>>>
>>>>> I dont know how to increase the disk partition after booting
>>>>> up
>>>>> the instance.
>>>>>
>>>>> On 24 Sep 2015 23:58, "Mike Smith" wrote:
>>>>>
>>>>>> I wonder if your disk image has a partition set to 20GB.
>>>>>> Your
>>>>>> instance may get a bigger disk, but the partition is still
>>>>>> set
>>>>>> to 20G. Try running an “fdisk -l” or something
>>>>>> inside the
>>>>>> VM to see if the disk itself is actually bigger than the
>>>>>> partition you are seeing
>>>>>>
>>>>>> There are cloud init scripts that resize these for you, or
>>>>>> Kilo
>>>>>> has an provisioning-time option to make the disk
>>>>>> automatically
>>>>>> resize
>>>>>>
>>>>>> Mike Smith
>>>>>> Principal Engineer / Cloud Team Lead
>>>>>> Overstock.com [5]
>>>>>>
>>>>>>> On Sep 24, 2015, at 12:44 PM, Nasir Mahmood wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> My openstack KILO version installation is almost
>>>>>>> production
>>>>>>> level now, with 3 compute nodes.
>>>>>>>
>>>>>>> On a recently added compute node with plenty of disk
>>>>>>> space, I
>>>>>>> have tried to add a new flavor with 8 cores, 16 gb ram
>>>>>>> and 500
>>>>>>> gb hard disk space. The instance spins up, but with 20 gb
>>>>>>> of
>>>>>>> disk space only, as it happens on others Compute nodes.
>>>>>>> This
>>>>>>> new Compute node has a single partition of 3 tb on an
>>>>>>> hw
>>>>>>> raid .
>>>>>>>
>>>>>>> Any idea..
>>>>>>> Regards,
>>>>>>> Nasir _______________________________________________
>>>>>>> Mailing list:
>>>>>>>
>>>>>>
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>> [1]
>>>>>>> [2]
>>>>>>> Post to : openstack at lists.openstack.org [2] [3]
>>>>>>> Unsubscribe :
>>>>>>>
>>>>>>
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>> [3]
>>>>>>> [4]
>>>>>>
>>>>>> -------------------------
>>>>>>
>>>>>> CONFIDENTIALITY NOTICE: This message is intended only for
>>>>>> the
>>>>>> use and review of the individual or entity to which it is
>>>>>> addressed and may contain information that is privileged
>>>>>> and
>>>>>> confidential. If the reader of this message is not the
>>>>>> intended
>>>>>> recipient, or the employee or agent responsible for
>>>>>> delivering
>>>>>> the message solely to the intended recipient, you are
>>>>>> hereby
>>>>>> notified that any dissemination, distribution or copying of
>>>>>> this
>>>>>> communication is strictly prohibited. If you have received
>>>>>> this
>>>>>> communication in error, please notify sender immediately by
>>>>>> telephone or return email. Thank you.
>>>>
>>>> --
>>>>
>>>> Nasir Mahmood
>>>
>>> --
>>>
>>> Nasir Mahmood
>>>
>>> Links:
>>> ------
>>> [1] mailto:nasir.mahmood at gmail.com [8]
>>> [2] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> [9]
>>> [3] mailto:openstack at lists.openstack.org [10]
>>> [4] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> [11]
>>> [5] http://Overstock.com [12]
>>> [6] mailto:mismith at overstock.com [13]
>>> [7] mailto:nasir.mahmood at gmail.com [14]
>>> [8] mailto:mockbuild at c6b9.bsys.dev.centos.org [15]
>>> [9] mailto:dm-devel at redhat.com [16]
>>> [10] mailto:nasir.mahmood at gmail.com [17]
>>
>> _______________________________________________
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack [18]
>> Post to : openstack at lists.openstack.org [19]
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack [20]
>
> --
>
> Nasir Mahmood
>
>
> Links:
> ------
> [1] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [2] mailto:openstack at lists.openstack.org
> [3] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [4] mailto:mockbuild at c6b9.bsys.dev.centos.org
> [5] http://webmail.acmac.uoc.gr/tel:%5B0037217000
> [6] http://webmail.acmac.uoc.gr/tel:%5B0037217000
> [7] mailto:dm-devel at redhat.com
> [8] mailto:nasir.mahmood at gmail.com
> [9] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [10] mailto:openstack at lists.openstack.org
> [11] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [12] http://Overstock.com
> [13] mailto:mismith at overstock.com
> [14] mailto:nasir.mahmood at gmail.com
> [15] mailto:mockbuild at c6b9.bsys.dev.centos.org
> [16] mailto:dm-devel at redhat.com
> [17] mailto:nasir.mahmood at gmail.com
> [18] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [19] mailto:openstack at lists.openstack.org
> [20] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [21] mailto:giorgis at acmac.uoc.gr
--
More information about the Openstack
mailing list