[Openstack] KILO -- Max disk size is 20 gb
Georgios Dimitrakakis
giorgis at acmac.uoc.gr
Mon Sep 28 11:10:13 UTC 2015
I remember having a similar problem with an older CentOS image.
The steps I did to correct it were the following:
1) Updated to the latest version
yum update
2) Installed (if not installed) cloud-init, cloud-utils,
dracut-modules-growroot
yum install cloud-init cloud-utils dracut-modules-growroot
3) Rebuild the initramfs to use the latest installed dracut module
dracut --force
Shutoff the machine and create a snapshot of it. Use this snapshot to
bui
> hi All,
>
> I have
>
> 1) downloaded a brand new CentOs 6.7 QCOW2 image from Centos Repo.
>
> 2) spinned up the VM -- it worked like a charm
>
> 3) disk is still showing 7.8 GB in Size -- whereas I have allocated a
> 500 GB to this VM. below is output from the fdisk -l.
>
> 4) I dont see any error logs in cloud-init messages. Everything seems
> perfect while booting up.
>
> [root at cmp1 ~]# df -h
> Filesystem Size Used Avail Use% Mounted on
> /dev/vda1 7.8G 613M 6.8G 9% /
> tmpfs 5.7G 0 5.7G 0% /dev/shm
> [root at cmp1 ~]#
>
> [root at cmp1 ~] # fdisk -l
>
> Disk /dev/vda: 536.9 GB, 536870912000 bytes
> 255 heads, 63 sectors/track, 65270 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x000574cf
>
> Device Boot Start End Blocks Id
> System
> /dev/vda1 * 1 1045 8387584 83
> Linux
> [root at cmp1 ~]
>
> complete boot-logs are given below:
>
>
> -----------------------------------------------------------------------------------------------------------------
>
> nova console-log CMP1
> Press any key to continue.
> [H[J
> GNU GRUB version 0.97 (639K lower / 3144692K upper memory)
>
>
> [m[4;2H+-------------------------------------------------------------------------+[5;2H|[5;76H|[6;2H|[6;76H|[7;2H|[7;76H|[8;2H|[8;76H|[9;2H|[9;76H|[10;2H|[10;76H|[11;2H|[11;76H|[12;2H|[12;76H|[13;2H|[13;76H|[14;2H|[14;76H|[15;2H|[15;76H|[16;2H|[16;76H|[17;2H+-------------------------------------------------------------------------+[m
> Use the ^ and v keys to select which entry is highlighted.
> Press enter to boot the selected OS, e to edit the
> commands before booting, a to modify the kernel arguments
> before booting, or c for a command-line.[5;78H [m[7m[5;3H
> CentOS 6 (2.6.32-504.1.3.el6.x86_64)
> [5;75H[m[m[6;3H
>
> [6;75H[m[m[7;3H
>
> [7;75H[m[m[8;3H
> [8;75H[m[m[9;3H
>
> [9;75H[m[m[10;3H
>
> [10;75H[m[m[11;3H
>
> [11;75H[m[m[12;3H
>
> [12;75H[m[m[13;3H
>
> [13;75H[m[m[14;3H
>
> [14;75H[m[m[15;3H
>
> [15;75H[m[m[16;3H
>
> [16;75H[m[16;78H [5;75H[23;4HThe highlighted entry will be booted
> automatically in 1 seconds. [5;75H[H[JInitializing cgroup subsys
> cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.32-504.1.3.el6.x86_64
> (mockbuild at c6b9.bsys.dev.centos.org [8]) (gcc version 4.4.7 20120313
> (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Nov 11 17:57:25 UTC 2014
> Command line: ro root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD console=ttyS0,115200
> crashkernel=auto SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc
> KEYTABLE=us rd_NO_DM
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfffd000 (usable)
> BIOS-e820: 00000000bfffd000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000032e000000 (usable)
> DMI 2.4 present.
> SMBIOS version 2.4 @ 0xF1F90
> Hypervisor detected: KVM
> last_pfn = 0x32e000 max_arch_pfn = 0x400000000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> last_pfn = 0xbfffd max_arch_pfn = 0x400000000
> Using GB pages for direct mapping
> init_memory_mapping: 0000000000000000-00000000bfffd000
> init_memory_mapping: 0000000100000000-000000032e000000
> RAMDISK: 37217000 - 37fefb6b
> ACPI: RSDP 00000000000f1f60 00014 (v00 BOCHS )
> ACPI: RSDT 00000000bffffa7a 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC
> 00000001)
> ACPI: FACP 00000000bfffee77 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
> 00000001)
> ACPI: DSDT 00000000bfffdd40 01137 (v01 BXPC BXDSDT 00000001 INTL
> 20140926)
> ACPI: FACS 00000000bfffdd00 00040
> ACPI: SSDT 00000000bfffeeeb 00ADF (v01 BOCHS BXPCSSDT 00000001 BXPC
> 00000001)
> ACPI: APIC 00000000bffff9ca 000B0 (v01 BOCHS BXPCAPIC 00000001 BXPC
> 00000001)
> Setting APIC routing to flat.
> No NUMA configuration found
> Faking a node at 0000000000000000-000000032e000000
> Bootmem setup node 0 0000000000000000-000000032e000000
> NODE_DATA [000000000000b000 - 000000000003efff]
> bootmap [0000000000100000 - 0000000000165bff] pages 66
> (8 early reservations) ==> bootmem [0000000000 - 032e000000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
> 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
> 0000008000]
> #2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 -
> 000202abe4]
> #3 [0037217000 - 0037fefb6b] RAMDISK ==> [0037217000
> - 0037fefb6b]
> #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
> 0000100000]
> #5 [000202b000 - 000202b0dd] BRK ==>
> [000202b000 - 000202b0dd]
> #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000
> - 000000a000]
> #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000
> - 000000b000]
> found SMP MP-table at [ffff8800000f1fb0] f1fb0
> Reserving 129MB of memory at 48MB for crashkernel (System RAM:
> 13024MB)
> kvm-clock: Using msrs 4b564d01 and 4b564d00
> kvm-clock: cpu 0, msr 0:1c28841, boot clock
> Zone PFN ranges:
> DMA 0x00000001 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x0032e000
> Movable zone start PFN for each node
> early_node_map[3] active PFN ranges
> 0: 0x00000001 -> 0x0000009f
> 0: 0x00000100 -> 0x000bfffd
> 0: 0x00100000 -> 0x0032e000
> ACPI: PM-Timer IO Port: 0x608
> Setting APIC routing to flat.
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 8 CPUs, 0 hotplug CPUs
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> PM: Registered nosave memory: 00000000bfffd000 - 00000000c0000000
> PM: Registered nosave memory: 00000000c0000000 - 00000000feffc000
> PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
> PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
> PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
> Allocating PCI resources starting at c0000000 (gap:
> c0000000:3effc000)
> Booting paravirtualized kernel on KVM
> NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720
> u262144
> pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
> pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> kvm-clock: cpu 0, msr 0:28216841, primary cpu clock
> kvm-stealtime: cpu 0, msr 2820e880
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 3026213
> Policy zone: Normal
> Kernel command line: ro
> root=UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
> rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD console=ttyS0,115200
> crashkernel=129M at 0M SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc
> KEYTABLE=us rd_NO_DM
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Checking aperture...
> No AGP bridge found
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Placing 64MB software IO TLB between ffff880020000000 -
> ffff880024000000
> software IO TLB at phys 0x20000000 - 0x24000000
> Memory: 11887224k/13336576k available (5336k kernel code, 1048980k
> absent, 400372k reserved, 7016k data, 1292k init)
> Hierarchical RCU implementation.
> NR_IRQS:33024 nr_irqs:472
> Console: colour VGA+ 80x25
> console [ttyS0] enabled
> allocated 49283072 bytes of page_cgroup
> please try cgroup_disable=memory option if you dont want memory
> cgroups
> Detected 2659.998 MHz processor.
> Calibrating delay loop (skipped) preset value.. 5319.99 BogoMIPS
> (lpj=2659998)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> SELinux: Initializing.
> Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> Initializing cgroup subsys blkio
> Initializing cgroup subsys perf_event
> Initializing cgroup subsys net_prio
> mce: CPU supports 10 MCE banks
> alternatives: switching to unfair spinlock
> ACPI: Core revision 20090903
> ftrace: converting mcount calls to 0f 1f 44 00 00
> ftrace: allocating 21917 entries in 86 pages
> Enabling x2apic
> Enabled x2apic
> APIC routing finalized to physical x2apic.
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
> Performance Events: unsupported p6 CPU model 44 no PMU driver,
> software events only.
> NMI watchdog disabled (cpu0): hardware events not enabled
> Booting Node 0, Processors #1
> kvm-clock: cpu 1, msr 0:28256841, secondary cpu clock
> kvm-stealtime: cpu 1, msr 2824e880
> #2
> kvm-clock: cpu 2, msr 0:28296841, secondary cpu clock
> kvm-stealtime: cpu 2, msr 2828e880
> #3
> kvm-clock: cpu 3, msr 0:282d6841, secondary cpu clock
> kvm-stealtime: cpu 3, msr 282ce880
> #4
> kvm-clock: cpu 4, msr 0:28316841, secondary cpu clock
> kvm-stealtime: cpu 4, msr 2830e880
> #5
> kvm-clock: cpu 5, msr 0:28356841, secondary cpu clock
> kvm-stealtime: cpu 5, msr 2834e880
> #6
> kvm-clock: cpu 6, msr 0:28396841, secondary cpu clock
> kvm-stealtime: cpu 6, msr 2838e880
> #7 Ok.
> kvm-clock: cpu 7, msr 0:283d6841, secondary cpu clock
> kvm-stealtime: cpu 7, msr 283ce880
> Brought up 8 CPUs
> Total of 8 processors activated (42559.96 BogoMIPS).
> devtmpfs: initialized
> regulator: core version 0.5
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1 for base access
> bio: create slab at 0
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
> pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
> pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
> vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:00:02.0
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> Switching to clocksource kvm-clock
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 7 devices
> ACPI: ACPI bus type pnp unregistered
> NET: Registered protocol family 2
> IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> pci 0000:00:01.0: PIIX3: Enabling Passive Release
> pci 0000:00:01.0: Activating ISA DMA hang workarounds
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) ->
> IRQ 11
> pci 0000:00:01.2: PCI INT D disabled
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 14178k freed
> futex hash table entries: 2048 (order: 5, 131072 bytes)
> audit: initializing netlink socket (disabled)
> type=2000 audit(1443432753.596:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 23244
> alg: No test for stdrng (krng)
> ksign: Installing public key data
> Loading keyring
> - Added public key EE81BF431C03EFE7
> - User ID: CentOS (Kernel Module GPG key)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp: Slot [3] registered
> acpiphp: Slot [4] registered
> acpiphp: Slot [5] registered
> acpiphp: Slot [6] registered
> acpiphp: Slot [7] registered
> acpiphp: Slot [8] registered
> acpiphp: Slot [9] registered
> acpiphp: Slot [10] registered
> acpiphp: Slot [11] registered
> acpiphp: Slot [12] registered
> acpiphp: Slot [13] registered
> acpiphp: Slot [14] registered
> acpiphp: Slot [15] registered
> acpiphp: Slot [16] registered
> acpiphp: Slot [17] registered
> acpiphp: Slot [18] registered
> acpiphp: Slot [19] registered
> acpiphp: Slot [20] registered
> acpiphp: Slot [21] registered
> acpiphp: Slot [22] registered
> acpiphp: Slot [23] registered
> acpiphp: Slot [24] registered
> acpiphp: Slot [25] registered
> acpiphp: Slot [26] registered
> acpiphp: Slot [27] registered
> acpiphp: Slot [28] registered
> acpiphp: Slot [29] registered
> acpiphp: Slot [30] registered
> acpiphp: Slot [31] registered
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button [PWRF]
> [Firmware Bug]: No valid trip found
> GHES: HEST is not enabled!
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> crash memory driver: version 1.1
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> brd: module loaded
> loop: module loaded
> input: Macintosh mouse button emulation as
> /devices/virtual/input/input1
> Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 Enhanced Host Controller (EHCI) Driver
> ohci_hcd: USB 1.1 Open Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level,
> high)
> -> IRQ 11
> uhci_hcd 0000:00:01.2: UHCI Host Controller
> uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: UHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.32-504.1.3.el6.x86_64 uhci_hcd
> usb usb1: SerialNumber: 0000:00:01.2
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input2
> rtc_cmos 00:01: RTC can wake from S4
> rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one day, 114 bytes nvram
> cpuidle: using governor ladder
> cpuidle: using governor menu
> EFI Variables Facility v0.08 2004-May-17
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> GRE over IPv4 demultiplexor driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> registered taskstats version 1
> rtc_cmos 00:01: setting system clock to 2015-09-28 09:32:34 UTC
> (1443432754)
> Initalizing network drop monitor service
> Freeing unused kernel memory: 1292k freed
> Write protecting the kernel read-only data: 10240k
> Freeing unused kernel memory: 788k freed
> Freeing unused kernel memory: 1568k freed
> dracut: dracut-004-356.el6
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
> dm-devel at redhat.com [9]
> udev: starting version 147
> dracut: Starting plymouth daemon
> dracut: rd_NO_MD: removing MD RAID activation
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14
> ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15
> usb 1-1: new full speed USB device number 2 using uhci_hcd
> Refined TSC clocksource calibration: 2659.872 MHz.
> usb 1-1: New USB device found, idVendor=0627, idProduct=0001
> usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
> usb 1-1: Product: QEMU USB Tablet
> usb 1-1: Manufacturer: QEMU
> usb 1-1: SerialNumber: 42
> usb 1-1: configuration #1 chosen from 1 choice
> input: QEMU QEMU USB Tablet as
> /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
> generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer
> [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
> virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level,
> high) -> IRQ 10
> virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
> high) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level,
> high) -> IRQ 10
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level,
> high) -> IRQ 11
> %G vda: vda1
> input: ImExPS/2 Generic Explorer Mouse as
> /devices/platform/i8042/serio1/input/input4
> EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
> dracut: Mounted root filesystem /dev/vda1
> SELinux: Disabled at runtime.
> type=1404 audit(1443432755.895:2): selinux=0 auid=4294967295
> ses=4294967295
> dracut:
> dracut: Switching root
> Welcome to CentOS
> Starting udev: udevd[418]: can not read
> /etc/udev/rules.d/75-persistent-net-generator.rules
> udevd[418]: can not read
> /etc/udev/rules.d/75-persistent-net-generator.rules
>
> udev: starting version 147
> piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
> %G[ OK ]
> Setting hostname localhost.localdomain: [ OK ]
> Checking filesystems
> Checking all file systems.
> [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda1
> /dev/vda1: Superblock last mount time is in the future.
> (by less than a day, probably due to the hardware clock
> being incorrectly set) FIXED.
> /dev/vda1: Superblock last write time is in the future.
> (by less than a day, probably due to the hardware clock
> being incorrectly set). FIXED.
> /dev/vda1: clean, 17737/524288 files, 221221/2096896 blocks
> [ OK ]
> Remounting root filesystem in read-write mode: [ OK ]
> Mounting local filesystems: [ OK ]
> Enabling /etc/fstab swaps: [ OK ]
> Entering non-interactive startup
> ip6tables: Applying firewall rules: NET: Registered protocol family
> 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ OK ]
> iptables: Applying firewall rules: ip_tables: (C) 2000-2006 Netfilter
> Core Team
> [ OK ]
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0:
> Determining IP information for eth0... done.
> [ OK ]
> Bringing up interface eth1:
> Determining IP information for eth1... done.
> [ OK ]
> Starting auditd: type=1305 audit(1443432770.405:3): audit_pid=1047
> old=0 auid=4294967295 ses=4294967295 res=1
> [ OK ]
> Starting system logger: [ OK ]
> No kdump initial ramdisk found.[WARNING]
> Rebuilding /boot/initrd-2.6.32-504.1.3.el6.x86_64kdump.img
> Warning: There might not be enough space to save a vmcore.
> The size of UUID=f857466b-a4a3-4346-84a5-8859f5f6f4cb
> should be greater than 11905052 kilo bytes.
> Starting kdump:[ OK ]
> Mounting filesystems: [ OK ]
> Starting acpi daemon: [ OK ]
> Retrigger failed udev events[ OK ]
> Starting cloud-init: Cloud-init v. 0.7.5 running init-local at Mon,
> 28
> Sep 2015 09:33:15 +0000. Up 41.96 seconds.
> Starting cloud-init: Cloud-init v. 0.7.5 running init at Mon, 28 Sep
> 2015 09:33:16 +0000. Up 42.73 seconds.
> ci-info: +++++++++++++++++++++++++++Net device
> info+++++++++++++++++++++++++++
> ci-info:
> +--------+------+---------------+---------------+-------------------+
> ci-info: | Device | Up | Address | Mask |
> Hw-Address |
> ci-info:
> +--------+------+---------------+---------------+-------------------+
> ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 |
> . |
> ci-info: | eth1 | True | 192.168.1.37 | 255.255.255.0 |
> fa:16:3e:d9:0b:2c |
> ci-info: | eth0 | True | 192.168.10.18 | 255.255.255.0 |
> fa:16:3e:00:f9:7c |
> ci-info:
> +--------+------+---------------+---------------+-------------------+
> ci-info: ++++++++++++++++++++++++++++++++Route
> info++++++++++++++++++++++++++++++++
> ci-info:
>
> +-------+--------------+-------------+---------------+-----------+-------+
> ci-info: | Route | Destination | Gateway | Genmask |
> Interface | Flags |
> ci-info:
>
> +-------+--------------+-------------+---------------+-----------+-------+
> ci-info: | 0 | 192.168.1.0 | 0.0.0.0 | 255.255.255.0 |
> eth1 | U |
> ci-info: | 1 | 192.168.10.0 | 0.0.0.0 | 255.255.255.0 |
> eth0 | U |
> ci-info: | 2 | 0.0.0.0 | 192.168.1.1 | 0.0.0.0
> | eth1 | UG |
> ci-info:
>
> +-------+--------------+-------------+---------------+-----------+-------+
> Starting cloud-init: Cloud-init v. 0.7.5 running modules:config at
> Mon, 28 Sep 2015 09:33:18 +0000. Up 45.57 seconds.
> Starting cloud-init: Cloud-init v. 0.7.5 running modules:final at
> Mon,
> 28 Sep 2015 09:33:20 +0000. Up 47.34 seconds.
> ci-info: +++++++++Authorized keys from
> /home/centos/.ssh/authorized_keys for user centos++++++++++
> ci-info:
>
> +---------+-------------------------------------------------+---------+-------------------+
> ci-info: | Keytype | Fingerprint (md5)
> | Options | Comment |
> ci-info:
>
> +---------+-------------------------------------------------+---------+-------------------+
> ci-info: | ssh-rsa | 45:f2:6d:21:c7:3c:22:f3:f1:54:8c:0a:38:22:67:7b
> |
> - | Generated-by-Nova |
> ci-info:
>
> +---------+-------------------------------------------------+---------+-------------------+
> ec2:
> ec2: #############################################################
> ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
> ec2: 1024 50:a6:7c:76:63:c6:05:2f:9b:fa:a5:2b:f9:1b:77:4f
> /etc/ssh/ssh_host_dsa_key.pub (DSA)
> ec2: 2048 f9:f7:13:ce:76:fa:e5:d2:88:5e:8e:ff:b4:e8:74:3c
> /etc/ssh/ssh_host_key.pub (RSA1)
> ec2: 2048 61:c1:89:02:b6:55:60:57:b4:86:5f:90:f2:f5:c8:2f
> /etc/ssh/ssh_host_rsa_key.pub (RSA)
> ec2: -----END SSH HOST KEY FINGERPRINTS-----
> ec2: #############################################################
> -----BEGIN SSH HOST KEY KEYS-----
> Trimmed
> -----END SSH HOST KEY KEYS-----
> Cloud-init v. 0.7.5 finished at Mon, 28 Sep 2015 09:33:21 +0000.
> Datasource DataSourceOpenStack [net,ver=2]. Up 47.78 seconds
> Starting postfix: [ OK ]
> Starting crond: [ OK ]
> 50+0 records in
> 50+0 records out
> 25600 bytes (26 kB) copied, 0.00601752 s, 4.3 MB/s
> Changing password for user root.
> passwd: all authentication tokens updated successfully.
> Locking password for user root.
> passwd: Success
>
> CentOS release 6.6 (Final)
> Kernel 2.6.32-504.1.3.el6.x86_64 on an x86_64
>
> cmp1 login:
>
> On Mon, Sep 28, 2015 at 10:48 AM, Nasir Mahmood wrote:
>
>> Ok.. I see that a 500 Gb disk is allotted to the VM instance but
>> it doesnt show anything beyond 20 Gigs. This instance along with
>> many others booted up with metadata ,but ( I just recalled that my
>> VMs dont get metadata successfully during very first boot and this
>> may be the cause of this nonsense. what I have to do is I have to
>> reboot the vm twice to make it ready for the OpenStack Env. like
>> correct interfaces, hostname, etc. ) ok..
>>
>> Let me get back to you guys with updates on a new VM ...
>>
>> On Fri, Sep 25, 2015 at 8:17 AM, Nasir Mahmood wrote:
>>
>>> Mike,
>>>
>>> I was expecting that the disk should grow with usage, which
>>> didnt happen after I tried to create a 40gb file using dd command.
>>>
>>>
>>> I dont know how to increase the disk partition after booting up
>>> the instance.
>>>
>>> On 24 Sep 2015 23:58, "Mike Smith" wrote:
>>>
>>>> I wonder if your disk image has a partition set to 20GB. Your
>>>> instance may get a bigger disk, but the partition is still set
>>>> to 20G. Try running an “fdisk -l” or something inside the
>>>> VM to see if the disk itself is actually bigger than the
>>>> partition you are seeing
>>>>
>>>> There are cloud init scripts that resize these for you, or Kilo
>>>> has an provisioning-time option to make the disk automatically
>>>> resize
>>>>
>>>> Mike Smith
>>>> Principal Engineer / Cloud Team Lead
>>>> Overstock.com [5]
>>>>
>>>>> On Sep 24, 2015, at 12:44 PM, Nasir Mahmood wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> My openstack KILO version installation is almost production
>>>>> level now, with 3 compute nodes.
>>>>>
>>>>> On a recently added compute node with plenty of disk space, I
>>>>> have tried to add a new flavor with 8 cores, 16 gb ram and 500
>>>>> gb hard disk space. The instance spins up, but with 20 gb of
>>>>> disk space only, as it happens on others Compute nodes. This
>>>>> new Compute node has a single partition of 3 tb on an hw
>>>>> raid .
>>>>>
>>>>> Any idea..
>>>>> Regards,
>>>>> Nasir _______________________________________________
>>>>> Mailing list:
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>> [2]
>>>>> Post to : openstack at lists.openstack.org [3]
>>>>> Unsubscribe :
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>> [4]
>>>>
>>>> -------------------------
>>>>
>>>> CONFIDENTIALITY NOTICE: This message is intended only for the
>>>> use and review of the individual or entity to which it is
>>>> addressed and may contain information that is privileged and
>>>> confidential. If the reader of this message is not the intended
>>>> recipient, or the employee or agent responsible for delivering
>>>> the message solely to the intended recipient, you are hereby
>>>> notified that any dissemination, distribution or copying of this
>>>> communication is strictly prohibited. If you have received this
>>>> communication in error, please notify sender immediately by
>>>> telephone or return email. Thank you.
>>
>> --
>>
>> Nasir Mahmood
>
> --
>
> Nasir Mahmood
>
>
> Links:
> ------
> [1] mailto:nasir.mahmood at gmail.com
> [2] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [3] mailto:openstack at lists.openstack.org
> [4] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> [5] http://Overstock.com
> [6] mailto:mismith at overstock.com
> [7] mailto:nasir.mahmood at gmail.com
> [8] mailto:mockbuild at c6b9.bsys.dev.centos.org
> [9] mailto:dm-devel at redhat.com
> [10] mailto:nasir.mahmood at gmail.com
More information about the Openstack
mailing list