Open Stack

If you are a Puppet shop you should check out the Puppet community modules.
You will get familiar with all the inner goo as you'll need your own
composition layer (in my case a series of hiera files). There's no reason
to reinvent the wheel unless you really want to.

-Erik

On Jun 21, 2017 2:19 PM, "Satish Patel" <satish.txt at gmail.com> wrote:

> Thank you all of you for your opinion, As mike suggested i am also
> planning to brew home grown puppet module to understand each and every
> component and their role instead of grabbing third party tool, I am
> sure OOO is best for 100 deploying 100 compute node but in my setup we
> have only 5 servers and its not worth it to manage undercloud server.
>
> We are puppet shop so it would be easy to write own code and go from there.
>
> On Wed, Jun 21, 2017 at 1:25 AM, Remo Mattei <remo at italy1.com> wrote:
> > I did a deployment with cs9 hp it was pretty bad. I hope the new one does
> > better.
> >
> > Nevertheless I do not see many using hp out there. Maybe different
> regions
> > like emea do better with that.
> >
> > Inviato da iPhone
> >
> > Il giorno 20 giu 2017, alle ore 21:10, John van Ommen
> > <john.vanommen at gmail.com> ha scritto:
> >
> > At HPE we originally used TripleO but switched to a 'flat' model.
> >
> > I personally didn't see any advantage to Triple O. In theory, it should
> be
> > easier to manage and upgrade. In the real world, Helion 3.0 and 4.0 are
> > superior in every respect.
> >
> > John
> >
> > On Jun 20, 2017 9:02 PM, "Remo Mattei" <remo at italy1.com> wrote:
> >>
> >> I worked for Red Hat and they really want to get ooo going because the
> >> installation tools did never work as everyone was hoping. Before Red
> Hat I
> >> was at Mirantis and the fuel installation was nice now dead. I know ooo
> will
> >> go into containers next couple of release but kolla–Ansible is one of
> the
> >> emerging solutions now to get it out fast.
> >>
> >> I am doing a project now where I am working on deploying ooo just
> finished
> >> the doc for Ocata undercloud.
> >>
> >> Just my two cents to concord with Mike’s statement.
> >>
> >> Remo
> >>
> >> Inviato da iPhone
> >>
> >> Il giorno 20 giu 2017, alle ore 20:51, Mike Smith <
> mismith at overstock.com>
> >> ha scritto:
> >>
> >> There are definitely 1,001 opinions on what is “best”.  We use RDO at
> >> Overstock and we use home-grown puppet modules because we do our own
> puppet
> >> modules for everything else we do here.  We based everything around the
> >> official Openstack install documents and we do it because we want to
> *fully*
> >> understand everything we can instead of treating it like a black box
> that
> >> knows how to do the magic.
> >>
> >> However, there are lots of options out there - ansible, kolla, puppet
> plus
> >> vendor-specific options too like those provided by Mirantis.  If there
> are
> >> config management tools (ansible, puppet, etc) that you already use,
> you may
> >> want to check out the Openstack options for those.  You are correct that
> >> that packstack is more of a ‘all-in-one-server’ installer for a quick
> POC.
> >> It can to more, but I think RDO recommends “Triple-O” (which stands for
> >> Openstack-on-Openstack) for production RDO deploys.  Since they are
> >> affiliated with RedHat, they would also lean heavily towards the Ansible
> >> option as well.
> >>
> >> Good luck!
> >>
> >>
> >> Mike Smith
> >> Overstock Cloud Team
> >>
> >>
> >>
> >> On Jun 20, 2017, at 5:49 PM, Erik McCormick <emccormick at cirrusseven.com
> >
> >> wrote:
> >>
> >> This is a religious discussion for most, but I would suggest Kolla. It
> >> takes out a lot of the guess work, has a good upgrade mechanism, and is
> well
> >> supported by the community via mailing list and ORC. Take a look.
> >>
> >> -Erik
> >>
> >>
> >> On Jun 20, 2017 7:15 PM, "Satish Patel" <satish.txt at gmail.com> wrote:
> >>>
> >>> We are deploying 5 node openstack cloud for internal use and wondering
> >>> what method we should use, initial test was on RDO packstack but i
> >>> heard packstack isn't good for production, some people on google
> >>> suggesting using triplo. I found its little complicated because you
> >>> need one more extra server run undercloud openstack to deploy
> >>> overcloud openstack, should i really use triplo or is there any other
> >>> and easy method which can allow us to upgrade in future also.
> >>>
> >>> _______________________________________________
> >>> Mailing list:
> >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >>> Post to     : openstack at lists.openstack.org
> >>> Unsubscribe :
> >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >>
> >> _______________________________________________
> >> Mailing list:
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >> Post to     : openstack at lists.openstack.org
> >> Unsubscribe :
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >>
> >>
> >> wbr>5949ed75173232896912281!
> >>
> >> _______________________________________________
> >> Mailing list:
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >> Post to     : openstack at lists.openstack.org
> >> Unsubscribe :
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >>
> >> !DSPAM:1,5949ed75173232896912281!
> >>
> >>
> >> _______________________________________________
> >> Mailing list:
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >> Post to     : openstack at lists.openstack.org
> >> Unsubscribe :
> >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >>
> > !DSPAM:1,5949f395185901832122137!
> >
> >
> > _______________________________________________
> > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
> > Post to     : openstack at lists.openstack.org
> > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
> >
>
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20170621/d0cb1098/attachment.html>