Open Stack

Thank you Kevin,

In the /etc/neutron/neutron.conf file, there is no [ml2_type_vlan]  section
under ocata.  Do I need to add this section in?

Thank you.

On Sun, Jun 18, 2017 at 12:08 PM, Kevin Benton <kevin at benton.pub> wrote:

> Ok. So the actual error message is "Invalid input for operation:
> physical_network 'provider1' unknown  for VLAN provider network.".
>
> That means that in your Neutron server configuration file under the
> [ml2_type_vlan] section you need to add 'provider1' to the
> 'network_vlan_ranges' option.
>
>
>
> On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evonosky at gmail.com>
> wrote:
>
>> Kevin-
>>
>> Thank you for the tip.  The Debug is attached as well.
>>
>> Thank you.
>>
>> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <kevin at benton.pub> wrote:
>>
>>> The openstack command should have an option to enable debugging so you
>>> can get the error message. Try openstack --debug
>>>
>>>
>>>
>>> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evonosky at gmail.com>
>>> wrote:
>>>
>>>> Gary-
>>>>
>>>> Thank you for the feedback.  I issued the command while tailing the log:
>>>>
>>>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource
>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The
>>>> server could not comply with the request since it is either malformed or
>>>> otherwise incorrect.*
>>>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi
>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - *
>>>>
>>>>
>>>> As for the ocata config, this was built by using the ocata:
>>>>
>>>> https://docs.openstack.org/ocata/install-guide-ubuntu/
>>>>
>>>>
>>>> Thank you.
>>>>
>>>>
>>>>
>>>>
>>>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkotton at vmware.com>
>>>> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> Please look in /var/log/neutron/neutron-server.log
>>>>>
>>>>> That should provide and exception trace
>>>>>
>>>>> Thanks
>>>>>
>>>>> Gary
>>>>>
>>>>>
>>>>>
>>>>> *From: *Alex Evonosky <alex.evonosky at gmail.com>
>>>>> *Date: *Sunday, June 18, 2017 at 5:04 PM
>>>>> *To: *"openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>> *Subject: *[Openstack] Routed provider networks
>>>>>
>>>>>
>>>>>
>>>>> Hello-
>>>>>
>>>>>
>>>>>
>>>>> I wanted to test the routed provider networks of Ocata, and following
>>>>> the example config:
>>>>>
>>>>>
>>>>>
>>>>> https://docs.openstack.org/ocata/networking-guide/config-rou
>>>>> ted-networks.html
>>>>>
>>>>>
>>>>>
>>>>> I typed in the following on my controller node:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> @openstack-controller1:~# openstack network create --share
>>>>> --provider-physical-network provider1 --provider-network-type vlan
>>>>> --provider-segment 2016 multisegment1
>>>>>
>>>>>
>>>>>
>>>>> and I receive this:
>>>>>
>>>>>
>>>>>
>>>>> *Error while executing command: Bad Request*
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Is there a log that may show what this error is referring to?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Thank you.
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Mailing list: http://lists.openstack.org/cgi
>>>> -bin/mailman/listinfo/openstack
>>>> Post to     : openstack at lists.openstack.org
>>>> Unsubscribe : http://lists.openstack.org/cgi
>>>> -bin/mailman/listinfo/openstack
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20170618/3048b0c2/attachment.html>