Open Stack

Ok. So the actual error message is "Invalid input for operation:
physical_network 'provider1' unknown  for VLAN provider network.".

That means that in your Neutron server configuration file under the
[ml2_type_vlan] section you need to add 'provider1' to the
'network_vlan_ranges' option.



On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evonosky at gmail.com>
wrote:

> Kevin-
>
> Thank you for the tip.  The Debug is attached as well.
>
> Thank you.
>
> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <kevin at benton.pub> wrote:
>
>> The openstack command should have an option to enable debugging so you
>> can get the error message. Try openstack --debug
>>
>>
>>
>> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evonosky at gmail.com>
>> wrote:
>>
>>> Gary-
>>>
>>> Thank you for the feedback.  I issued the command while tailing the log:
>>>
>>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource
>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The
>>> server could not comply with the request since it is either malformed or
>>> otherwise incorrect.*
>>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi
>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>> 664dc5e6023140eca0faeb2d0ecc31c2 - *
>>>
>>>
>>> As for the ocata config, this was built by using the ocata:
>>>
>>> https://docs.openstack.org/ocata/install-guide-ubuntu/
>>>
>>>
>>> Thank you.
>>>
>>>
>>>
>>>
>>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkotton at vmware.com>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> Please look in /var/log/neutron/neutron-server.log
>>>>
>>>> That should provide and exception trace
>>>>
>>>> Thanks
>>>>
>>>> Gary
>>>>
>>>>
>>>>
>>>> *From: *Alex Evonosky <alex.evonosky at gmail.com>
>>>> *Date: *Sunday, June 18, 2017 at 5:04 PM
>>>> *To: *"openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>> *Subject: *[Openstack] Routed provider networks
>>>>
>>>>
>>>>
>>>> Hello-
>>>>
>>>>
>>>>
>>>> I wanted to test the routed provider networks of Ocata, and following
>>>> the example config:
>>>>
>>>>
>>>>
>>>> https://docs.openstack.org/ocata/networking-guide/config-rou
>>>> ted-networks.html
>>>>
>>>>
>>>>
>>>> I typed in the following on my controller node:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> @openstack-controller1:~# openstack network create --share
>>>> --provider-physical-network provider1 --provider-network-type vlan
>>>> --provider-segment 2016 multisegment1
>>>>
>>>>
>>>>
>>>> and I receive this:
>>>>
>>>>
>>>>
>>>> *Error while executing command: Bad Request*
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Is there a log that may show what this error is referring to?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Thank you.
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> Mailing list: http://lists.openstack.org/cgi
>>> -bin/mailman/listinfo/openstack
>>> Post to     : openstack at lists.openstack.org
>>> Unsubscribe : http://lists.openstack.org/cgi
>>> -bin/mailman/listinfo/openstack
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20170618/2c39d660/attachment.html>