Open Stack

here my outputs:

ifconfig
br-int    Link encap:Ethernet  IndirizzoHW 5e:5d:d9:fb:02:40
          indirizzo inet6: fe80::5c5d:d9ff:fefb:240/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1
          Byte RX:0 (0.0 B)  Byte TX:648 (648.0 B)

enp0s3    Link encap:Ethernet  IndirizzoHW 08:00:27:1c:22:a9
          indirizzo inet:10.0.2.15  Bcast:10.0.2.255  Maschera:255.255.255.0
          indirizzo inet6: fe80::a00:27ff:fe1c:22a9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:651559 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220087 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:635288429 (635.2 MB)  Byte TX:13471937 (13.4 MB)

enp0s8    Link encap:Ethernet  IndirizzoHW 08:00:27:13:0c:e3
          indirizzo inet:192.168.50.107  Bcast:192.168.50.255
 Maschera:255.255.255.0
          indirizzo inet6: fe80::a00:27ff:fe13:ce3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:576250 errors:0 dropped:0 overruns:0 frame:0
          TX packets:590762 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:142961525 (142.9 MB)  Byte TX:493175198 (493.1 MB)

lo        Link encap:Loopback locale
          indirizzo inet:127.0.0.1  Maschera:255.0.0.0
          indirizzo inet6: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:403002 errors:0 dropped:0 overruns:0 frame:0
          TX packets:403002 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1
          Byte RX:21178175 (21.1 MB)  Byte TX:21178175 (21.1 MB)

ovs-system Link encap:Ethernet  IndirizzoHW 26:e1:d8:2e:9a:85
          indirizzo inet6: fe80::24e1:d8ff:fe2e:9a85/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1
          Byte RX:0 (0.0 B)  Byte TX:648 (648.0 B)

virbr0    Link encap:Ethernet  IndirizzoHW 52:54:00:51:c7:fa
          indirizzo inet:192.168.122.1  Bcast:192.168.122.255
 Maschera:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:0 (0.0 B)  Byte TX:0 (0.0 B)


sudo ovs-vsctl list-br
br-int

sudo ovs-vsctl show
267942a5-0ef1-4298-9c0b-01cc471eb24c
    Manager "ptcp:6640:192.168.50.106"
    Bridge br-int
        Controller "tcp:192.168.50.106:6653"
            is_connected: true
        Port br-int
            Interface br-int
                type: internal

sudo ovs-vsctl list-porta br-int
      NO RESULTS
I have not openvswitch-agent.ini

Thanks


2016-07-25 23:34 GMT+02:00 Turbo Fredriksson <turbo at bayour.com>:

> [Please keep this on the list so others can help]
>
> On Jul 25, 2016, at 10:21 PM, Silvia Fichera wrote:
>
> > the result of ifconfig br-int is this:
> > br-int    Link encap:Ethernet  IndirizzoHW 5e:5d:d9:fb:02:40
> >          indirizzo inet6: fe80::5c5d:d9ff:fefb:240/64 Scope:Link
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> >          collisioni:0 txqueuelen:1
> >          Byte RX:0 (0.0 B)  Byte TX:648 (648.0 B)
>
> Ok, that didn't say much. I mixed that up with "br-ex". Could you
> give me/us the full output from the following commands:
>
>         ifconfig
>         ovs-vsctl list-br
>         ovs-vsctl list-ports br-int
>
> > The error now is changed (I have reinstalled the OVS). Now It says
> > libvirtError: internal error: Unable to add port tap356540b7-87 to OVS
> > bridge br-int.
>
> Can you run your Neutron network agent (I'm using OpenvSwitch personally,
> so I would change /etc/neutron/plugins/ml2/openvswitch_agent.ini and
> set 'debug=true' and restart the OpenvSwitch agent).
> --
> As soon as you find a product that you really like,
> they will stop making it.
> - Wilson's Law
>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>



-- 
Silvia Fichera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160727/fe5ca3d7/attachment.html>