Open Stack

Yes I I have it set up in nova.conf and neutron.conf

On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <eblock at nde.ag> wrote:

> And did you change it to auth_type instead of auth_plugin? Also you should
> make sure that this option is in the correct section of your config file,
> for example
>
> [keystone_authtoken]
> ...
> auth_type = password
>
> or
>
> [neutron]
> ...
> auth_type = password
>
>
> Regards,
> Eugen
>
>
> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>
> Hi Eugen,
>>
>> Thanks. Log says its an error. Here is the full log.
>> http://pastebin.com/K1f4pJhB
>>
>> -Paras.
>>
>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>>
>> Hi Paras,
>>>
>>> the option auth_plugin is deprecated (from nova.conf):
>>>
>>> ---cut here---
>>> # Authentication type to load (unknown value)
>>> # Deprecated group/name - [DEFAULT]/auth_plugin
>>> auth_type = password
>>> ---cut here---
>>>
>>> But as far as I can tell, you should only get a warning, not an error,
>>> I've seen some of these warnings in my logs, but it works (I work with
>>> openSUSE). To get Mitaka working at all I simply tried to set the same
>>> options as in my working Liberty configs, and then I searched for
>>> deprecation warnings and additional options mentioned in the Mitaka
>>> guide.
>>>
>>> Hope this helps!
>>>
>>> Regards,
>>> Eugen
>>>
>>>
>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>
>>>
>>> Can somebody share the nova.conf and neutron.conf from working mitaka? I
>>> am
>>>
>>>> also following the same guide and ran into a problem.
>>>>
>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>>
>>>> Not sure what did I do wrong. It was while launching an instance.
>>>>
>>>>
>>>> Thanks
>>>>
>>>> Paras.
>>>>
>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <nasir.mahmood at gmail.com
>>>> >
>>>> wrote:
>>>>
>>>> Martinx,
>>>>
>>>>>
>>>>> glad to see that you are able to dig into the typo issue. I remember, I
>>>>> had to completely re-re-clean install my virtual setup of OpenStack
>>>>> for a
>>>>> POC back in 2015 , just because I have had miss-configured my
>>>>> neutron.conf's mysql DB connector information.
>>>>>
>>>>> Cheers!
>>>>>
>>>>>
>>>>> Regards,
>>>>> Nasir Mahmood
>>>>>
>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>>> thiagocmartinsc at gmail.com> wrote:
>>>>>
>>>>> FIXED!! I knew it was a typo somewhere!   LOL
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>>
>>>>>> Thank you guys!
>>>>>>
>>>>>> Sorry about the buzz on TWO mail lists...
>>>>>>
>>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>>> somethings aren't configured according... And there is no verification
>>>>>> steps to test the communication between Nova and Neutron.
>>>>>>
>>>>>>  Mitaka is working now on Xenial! YAY!!
>>>>>>
>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>>> multi-node deployments, fully automated!
>>>>>>
>>>>>> Cheers!
>>>>>> Thiago
>>>>>>
>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <thiagocmartinsc at gmail.com
>>>>>> >
>>>>>> wrote:
>>>>>>
>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <thiagocmartinsc at gmail.com
>>>>>> >
>>>>>>
>>>>>>> wrote:
>>>>>>>
>>>>>>> Guys,
>>>>>>>
>>>>>>>>
>>>>>>>>  I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using the
>>>>>>>> following document:
>>>>>>>>
>>>>>>>>  http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>>
>>>>>>>>  Yes, I know, the above document is for installing Mitaka on top of
>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is
>>>>>>>> that
>>>>>>>> on
>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive,
>>>>>>>> since
>>>>>>>> Mitaka is the default on Xenial, so, I can follow that document,
>>>>>>>> right?
>>>>>>>>  =)
>>>>>>>>
>>>>>>>>  At first, OpenStack installation goes okay, without any errors, all
>>>>>>>> services comes up, etc... However, it is not possible to launch an
>>>>>>>> Instance.
>>>>>>>>
>>>>>>>>  *** Errors on launching the Instance:
>>>>>>>>
>>>>>>>>  - Right after launching it:
>>>>>>>>
>>>>>>>>  https://paste.ubuntu.com/15902503/
>>>>>>>>
>>>>>>>>  - Spawning it, after Glance finishes the download, similar error a
>>>>>>>> second time:
>>>>>>>>
>>>>>>>>  https://paste.ubuntu.com/15902556/
>>>>>>>>
>>>>>>>>  What am I missing?
>>>>>>>>
>>>>>>>>  Apparently, Nova is not authorized to talk with Neutron but, I am
>>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>>
>>>>>>>>  Also, I have an Ansible automation to deploy it, so, it is less
>>>>>>>> error
>>>>>>>> prone. And however can help me, will see how I am deploying it.
>>>>>>>>
>>>>>>>>  I see no error on Admin Dashboard, all services are up.
>>>>>>>>
>>>>>>>>  NOTE: My Ansible playbooks is in a sense, "
>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated", it
>>>>>>>> is
>>>>>>>> very close to it, step-by-step.
>>>>>>>>
>>>>>>>>  How can I debug this? I mean, how can I try to do, what Nova is
>>>>>>>> doing
>>>>>>>> (its connection with Neutron), to make sure that the settings are in
>>>>>>>> place
>>>>>>>> correctly?
>>>>>>>>
>>>>>>>>  Here is how I am installing Mitaka on Xenial:
>>>>>>>>
>>>>>>>> ---
>>>>>>>>  1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>>
>>>>>>>>    * Configure your /etc/hostname and /etc/hosts.
>>>>>>>>
>>>>>>>>    DETAILS:
>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>>
>>>>>>>>
>>>>>>>>  2- Clone the automation:
>>>>>>>>
>>>>>>>>     cd ~
>>>>>>>>     git clone https://github.com/tmartinx/svauto.git
>>>>>>>>
>>>>>>>>
>>>>>>>>  3- Run the automation to install OpenStack (all-in-one)
>>>>>>>>
>>>>>>>>     cd ~/svauto
>>>>>>>>
>>>>>>>>    ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16
>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>>> --openstack-installation
>>>>>>>> --dry-run
>>>>>>>>
>>>>>>>>    ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>>> "openstack_installation=yes"
>>>>>>>> ---
>>>>>>>>
>>>>>>>>  NOTE: If you don't use "--dry-run" option, Ansible will be executed
>>>>>>>> automatically by "os-deploy.sh".
>>>>>>>>
>>>>>>>>  I am sharing the Ansible playbooks, because it will be easier to
>>>>>>>> see
>>>>>>>> what I am doing.
>>>>>>>>
>>>>>>>>  About the relevant configuration blocks, I believe that I have it
>>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>>
>>>>>>>>  * neutron.conf:
>>>>>>>> -
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>>> -
>>>>>>>>
>>>>>>>>  * nova.conf:
>>>>>>>> -
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>>> -
>>>>>>>>
>>>>>>>>  I already installed OpenStack many, many, many times, since Havana
>>>>>>>> release, I'm confident that I am doing it right but, of course,
>>>>>>>> maybe
>>>>>>>> I did
>>>>>>>> something wrong this time...   =P
>>>>>>>>
>>>>>>>>  I appreciate any help!
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>> Thiago
>>>>>>>>
>>>>>>>>
>>>>>>>> Hey guys,
>>>>>>>
>>>>>>>  I am reviewing everything, to make sure that my automation matches
>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>>
>>>>>>>  Two things...
>>>>>>>
>>>>>>> ---
>>>>>>>  1- All the verification steps (from official doc) passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>>> - passed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>>> - passed (mine doesn't have /horizon)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>>> - "6. Launch the instance" - FAIL
>>>>>>>
>>>>>>>   NOTE: I can create Networks, Subnets, Routers... I can see the
>>>>>>> Linux
>>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>>
>>>>>>>
>>>>>>>  2- This problem happen no matter if deploying it with Linux Bridges
>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>>> ---
>>>>>>>
>>>>>>>  So, I think that OpenStack should provide more verification steps,
>>>>>>> specially to test the communication / authentication between its
>>>>>>> different
>>>>>>> projects, for example:
>>>>>>>
>>>>>>>  A- Does Nova can communicate with Neutron? How to test this?
>>>>>>>
>>>>>>>  B- Can Nova download images from Glance? Etc...
>>>>>>>
>>>>>>>
>>>>>>>  Doing more reviews now...
>>>>>>>
>>>>>>>
>>>>>>> Cheers!
>>>>>>> Thiago
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list:
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>> Post to     : openstack at lists.openstack.org
>>>>>> Unsubscribe :
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> --
>>>>> Nasir Mahmood
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list:
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>> Post to     : openstack at lists.openstack.org
>>>>> Unsubscribe :
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>> --
>>> Eugen Block                             voice   : +49-40-559 51 75
>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>> Postfach 61 03 15
>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>
>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>                   Vorstand: Jens-U. Mozdzen
>>>                    USt-IdNr. DE 814 013 983
>>>
>>>
>>>
>>> _______________________________________________
>>> Mailing list:
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> Post to     : openstack at lists.openstack.org
>>> Unsubscribe :
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>
>>>
>
>
> --
> Eugen Block                             voice   : +49-40-559 51 75
> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
> Postfach 61 03 15
> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>
>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>           Sitz und Registergericht: Hamburg, HRB 90934
>                   Vorstand: Jens-U. Mozdzen
>                    USt-IdNr. DE 814 013 983
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160420/9d3f3969/attachment.html>