Open Stack

And did you change it to auth_type instead of auth_plugin? Also you  
should make sure that this option is in the correct section of your  
config file, for example

[keystone_authtoken]
...
auth_type = password

or

[neutron]
...
auth_type = password

Regards,
Eugen


Zitat von Paras pradhan <pradhanparas at gmail.com>:

> Hi Eugen,
>
> Thanks. Log says its an error. Here is the full log.
> http://pastebin.com/K1f4pJhB
>
> -Paras.
>
> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>
>> Hi Paras,
>>
>> the option auth_plugin is deprecated (from nova.conf):
>>
>> ---cut here---
>> # Authentication type to load (unknown value)
>> # Deprecated group/name - [DEFAULT]/auth_plugin
>> auth_type = password
>> ---cut here---
>>
>> But as far as I can tell, you should only get a warning, not an error,
>> I've seen some of these warnings in my logs, but it works (I work with
>> openSUSE). To get Mitaka working at all I simply tried to set the same
>> options as in my working Liberty configs, and then I searched for
>> deprecation warnings and additional options mentioned in the Mitaka guide.
>>
>> Hope this helps!
>>
>> Regards,
>> Eugen
>>
>>
>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>
>>
>> Can somebody share the nova.conf and neutron.conf from working mitaka? I am
>>> also following the same guide and ran into a problem.
>>>
>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>
>>> Not sure what did I do wrong. It was while launching an instance.
>>>
>>>
>>> Thanks
>>>
>>> Paras.
>>>
>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <nasir.mahmood at gmail.com>
>>> wrote:
>>>
>>> Martinx,
>>>>
>>>> glad to see that you are able to dig into the typo issue. I remember, I
>>>> had to completely re-re-clean install my virtual setup of OpenStack for a
>>>> POC back in 2015 , just because I have had miss-configured my
>>>> neutron.conf's mysql DB connector information.
>>>>
>>>> Cheers!
>>>>
>>>>
>>>> Regards,
>>>> Nasir Mahmood
>>>>
>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>> thiagocmartinsc at gmail.com> wrote:
>>>>
>>>> FIXED!! I knew it was a typo somewhere!   LOL
>>>>>
>>>>>
>>>>>
>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>
>>>>> Thank you guys!
>>>>>
>>>>> Sorry about the buzz on TWO mail lists...
>>>>>
>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>> somethings aren't configured according... And there is no verification
>>>>> steps to test the communication between Nova and Neutron.
>>>>>
>>>>>  Mitaka is working now on Xenial! YAY!!
>>>>>
>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>> multi-node deployments, fully automated!
>>>>>
>>>>> Cheers!
>>>>> Thiago
>>>>>
>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>>>>> wrote:
>>>>>
>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <thiagocmartinsc at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> Guys,
>>>>>>>
>>>>>>>  I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using the
>>>>>>> following document:
>>>>>>>
>>>>>>>  http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>
>>>>>>>  Yes, I know, the above document is for installing Mitaka on top of
>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is that
>>>>>>> on
>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive, since
>>>>>>> Mitaka is the default on Xenial, so, I can follow that document,
>>>>>>> right?
>>>>>>>  =)
>>>>>>>
>>>>>>>  At first, OpenStack installation goes okay, without any errors, all
>>>>>>> services comes up, etc... However, it is not possible to launch an
>>>>>>> Instance.
>>>>>>>
>>>>>>>  *** Errors on launching the Instance:
>>>>>>>
>>>>>>>  - Right after launching it:
>>>>>>>
>>>>>>>  https://paste.ubuntu.com/15902503/
>>>>>>>
>>>>>>>  - Spawning it, after Glance finishes the download, similar error a
>>>>>>> second time:
>>>>>>>
>>>>>>>  https://paste.ubuntu.com/15902556/
>>>>>>>
>>>>>>>  What am I missing?
>>>>>>>
>>>>>>>  Apparently, Nova is not authorized to talk with Neutron but, I am
>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>
>>>>>>>  Also, I have an Ansible automation to deploy it, so, it is less error
>>>>>>> prone. And however can help me, will see how I am deploying it.
>>>>>>>
>>>>>>>  I see no error on Admin Dashboard, all services are up.
>>>>>>>
>>>>>>>  NOTE: My Ansible playbooks is in a sense, "
>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated", it
>>>>>>> is
>>>>>>> very close to it, step-by-step.
>>>>>>>
>>>>>>>  How can I debug this? I mean, how can I try to do, what Nova is doing
>>>>>>> (its connection with Neutron), to make sure that the settings are in
>>>>>>> place
>>>>>>> correctly?
>>>>>>>
>>>>>>>  Here is how I am installing Mitaka on Xenial:
>>>>>>>
>>>>>>> ---
>>>>>>>  1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>
>>>>>>>    * Configure your /etc/hostname and /etc/hosts.
>>>>>>>
>>>>>>>    DETAILS:
>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>
>>>>>>>
>>>>>>>  2- Clone the automation:
>>>>>>>
>>>>>>>     cd ~
>>>>>>>     git clone https://github.com/tmartinx/svauto.git
>>>>>>>
>>>>>>>
>>>>>>>  3- Run the automation to install OpenStack (all-in-one)
>>>>>>>
>>>>>>>     cd ~/svauto
>>>>>>>
>>>>>>>    ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16
>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>> --openstack-installation
>>>>>>> --dry-run
>>>>>>>
>>>>>>>    ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>> "openstack_installation=yes"
>>>>>>> ---
>>>>>>>
>>>>>>>  NOTE: If you don't use "--dry-run" option, Ansible will be executed
>>>>>>> automatically by "os-deploy.sh".
>>>>>>>
>>>>>>>  I am sharing the Ansible playbooks, because it will be easier to see
>>>>>>> what I am doing.
>>>>>>>
>>>>>>>  About the relevant configuration blocks, I believe that I have it
>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>
>>>>>>>  * neutron.conf:
>>>>>>> -
>>>>>>>
>>>>>>>
>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>> -
>>>>>>>
>>>>>>>  * nova.conf:
>>>>>>> -
>>>>>>>
>>>>>>>
>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>> -
>>>>>>>
>>>>>>>  I already installed OpenStack many, many, many times, since Havana
>>>>>>> release, I'm confident that I am doing it right but, of course, maybe
>>>>>>> I did
>>>>>>> something wrong this time...   =P
>>>>>>>
>>>>>>>  I appreciate any help!
>>>>>>>
>>>>>>> Thanks!
>>>>>>> Thiago
>>>>>>>
>>>>>>>
>>>>>> Hey guys,
>>>>>>
>>>>>>  I am reviewing everything, to make sure that my automation matches
>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>
>>>>>>  Two things...
>>>>>>
>>>>>> ---
>>>>>>  1- All the verification steps (from official doc) passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>> - passed
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>> - passed (mine doesn't have /horizon)
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>
>>>>>>
>>>>>>
>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>> - "6. Launch the instance" - FAIL
>>>>>>
>>>>>>   NOTE: I can create Networks, Subnets, Routers... I can see the Linux
>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>
>>>>>>
>>>>>>  2- This problem happen no matter if deploying it with Linux Bridges
>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>> ---
>>>>>>
>>>>>>  So, I think that OpenStack should provide more verification steps,
>>>>>> specially to test the communication / authentication between its
>>>>>> different
>>>>>> projects, for example:
>>>>>>
>>>>>>  A- Does Nova can communicate with Neutron? How to test this?
>>>>>>
>>>>>>  B- Can Nova download images from Glance? Etc...
>>>>>>
>>>>>>
>>>>>>  Doing more reviews now...
>>>>>>
>>>>>>
>>>>>> Cheers!
>>>>>> Thiago
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list:
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>> Post to     : openstack at lists.openstack.org
>>>>> Unsubscribe :
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> Nasir Mahmood
>>>>
>>>> _______________________________________________
>>>> Mailing list:
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>> Post to     : openstack at lists.openstack.org
>>>> Unsubscribe :
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>
>>>>
>>>>
>>
>>
>> --
>> Eugen Block                             voice   : +49-40-559 51 75
>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>> Postfach 61 03 15
>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>
>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>           Sitz und Registergericht: Hamburg, HRB 90934
>>                   Vorstand: Jens-U. Mozdzen
>>                    USt-IdNr. DE 814 013 983
>>
>>
>>
>> _______________________________________________
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to     : openstack at lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>



-- 
Eugen Block                             voice   : +49-40-559 51 75
NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
Postfach 61 03 15
D-22423 Hamburg                         e-mail  : eblock at nde.ag

         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
           Sitz und Registergericht: Hamburg, HRB 90934
                   Vorstand: Jens-U. Mozdzen
                    USt-IdNr. DE 814 013 983