OK thanks, very good :) Best regards Yngvi From: Remo Mattei [mailto:Remo at Italy1.com] Sent: 21. ágúst 2015 11:47 To: Yngvi Páll Þorfinnsson <yngvith at siminn.is> Cc: openstack at lists.openstack.org Subject: Re: [Openstack] neutron network list in openstack Yes it's called overlapping IPs. You can turn this off if you would like. neutron.conf:# Enable or disable overlapping IPs for subnets allow_overlapping_ips = True Hopefully this help. Remo On Aug 21, 2015, at 13:25, Yngvi Páll Þorfinnsson <yngvith at siminn.is<mailto:yngvith at siminn.is>> wrote: Hi I have a question about network configuration. When I list networks on the openstack controller, there are i.e. four networks with the label "net1" with different id's of course but 3 of them have the same subnet defination : 10.0.0.0/24 as seen in the list below. ( my collegues have been busy). Every subnet has a different tenant ID. Is this the default behaviour in Openstack? I.e. the name will be 'net1' and the subnet created will be "10.0.0.0/24" ? If I source as admin, the list is like this: <image001.png> <image002.png> Best regards Yngvi !DSPAM:1,55d70da7322041344175386! _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack at lists.openstack.org<mailto:openstack at lists.openstack.org> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack !DSPAM:1,55d70da7322041344175386! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150821/cde35d7f/attachment.html>