Open Stack

Yes mongo db is running.

Please find the log details

[root at controller ~]# tailf /var/log/mongodb/mongodb.log
Tue May 27 15:41:18.259 [conn2] command admin.$cmd command: {
replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
0ms
Tue May 27 15:41:30.929 [DataFileSync] flushing mmaps took 1ms  for 2 files
Tue May 27 15:41:31.095 [TTLMonitor] query local.system.indexes query: {
expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0
keyUpdates:0 locks(micros) r:273 nreturned:0 reslen:20 0ms
Tue May 27 15:41:33.518 [conn2] run command admin.$cmd { listDatabases: 1.0
}
Tue May 27 15:41:33.519 [conn2] opening db:  ceilometer
Tue May 27 15:41:33.519 [conn2] command admin.$cmd command: {
listDatabases: 1.0 } ntoreturn:1 keyUpdates:0 locks(micros) R:2 W:438 r:39
reslen:181 1ms
Tue May 27 15:41:33.524 [conn2] run command admin.$cmd { replSetGetStatus:
1.0, forShell: 1.0 }
Tue May 27 15:41:33.524 [conn2] command admin.$cmd command: {
replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
0ms
Tue May 27 15:42:17.588 [conn2] run command admin.$cmd { replSetGetStatus:
1.0, forShell: 1.0 }
Tue May 27 15:42:17.588 [conn2] command admin.$cmd command: {
replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
0ms
Tue May 27 15:42:30.929 [DataFileSync] flushing mmaps took 1ms  for 4 files
Tue May 27 15:42:31.095 [TTLMonitor] query ceilometer.system.indexes query:
{ expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:12
keyUpdates:0 locks(micros) r:176 nreturned:0 reslen:20 0ms
Tue May 27 15:42:31.095 [TTLMonitor] query local.system.indexes query: {
expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0
keyUpdates:0 locks(micros) r:217 nreturned:0 reslen:20 0ms


mongod (pid  5210) is running...
[root at controller ~]# mongo
mongo         mongodump     mongofiles    mongooplog    mongorestore
mongosniff    mongotop
mongod        mongoexport   mongoimport   mongoperf     mongos
mongostat
[root at controller ~]# mongo
MongoDB shell version: 2.4.6
connecting to: test
> show dbs
ceilometer    0.203125GB
local    0.078125GB



wat is the cause for 8777 port not able to show up when startiing
ceilometer api service

Regards,
Dhanesh.




On Tue, May 27, 2014 at 3:29 PM, Eoghan Glynn <eglynn at redhat.com> wrote:

>
> > OperationalError: (OperationalError) unable to open database file None
> None
>
> Your config file implies mongodb usage for the metering store:
>
>   [database]
>   connection = mongodb://ceilometer:ceilometer@controller:27017/ceilometer
>
> Is mongo installed and running the expected host & port? (controller:27017)
>
> ----- Original Message -----
> > Hi
> >
> > please find the log file for ceilometer api
> >
> > [root at controller ceilometer]# tailf /var/log/ceilometer/api.log
> > 2014-05-27 15:16:30.236 4914 WARNING keystoneclient.middleware.auth_token
> > [-] Configuring auth_uri to point to the public identity endpoint is
> > required; clients may not be able to authenticate against an admin
> endpoint
> > 2014-05-27 15:16:30.237 4914 INFO keystoneclient.middleware.auth_token
> [-]
> > Using /tmp/keystone-signing-FvjNMu as cache directory for signing
> > certificate
> > 2014-05-27 15:16:30.654 4914 CRITICAL ceilometer [-] OperationalError:
> > (OperationalError) unable to open database file None None
> >
> > 2014-05-27 15:19:08.520 4950 INFO keystoneclient.middleware.auth_token
> [-]
> > Starting keystone auth_token middleware
> > 2014-05-27 15:19:08.521 4950 WARNING keystoneclient.middleware.auth_token
> > [-] Configuring admin URI using auth fragments. This is deprecated, use
> > 'identity_uri' instead.
> > 2014-05-27 15:19:08.521 4950 WARNING keystoneclient.middleware.auth_token
> > [-] Configuring auth_uri to point to the public identity endpoint is
> > required; clients may not be able to authenticate against an admin
> endpoint
> > 2014-05-27 15:19:08.523 4950 INFO keystoneclient.middleware.auth_token
> [-]
> > Using /tmp/keystone-signing-14uzsO as cache directory for signing
> > certificate
> > 2014-05-27 15:19:08.913 4950 CRITICAL ceilometer [-] OperationalError:
> > (OperationalError) unable to open database file None None
> >
> > please find the log file for ceilometer central.
> >
> > 2014-05-27 15:19:59.182 4969 ERROR
> ceilometer.openstack.common.threadgroup
> > [-] coercing to Unicode: need string or buffer, NoneType found
> > 2014-05-27 15:19:59.182 4969 TRACE
> ceilometer.openstack.common.threadgroup
> > Traceback (most recent call last):
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> >
> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py",
> > line 125, in wait
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     x.wait()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> >
> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py",
> > line 47, in wait
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     return self.thread.wait()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 168, in
> > wait
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     return
> self._exit_event.wait()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/eventlet/event.py", line 116, in wait
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     return
> hubs.get_hub().switch()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/eventlet/hubs/hub.py", line 187, in
> switch
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     return self.greenlet.switch()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 194, in
> > main
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     result = function(*args,
> > **kwargs)
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> >
> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/service.py",
> > line 486, in run_service
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     service.start()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/ceilometer/agent.py", line 137, in
> start
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     self.pipeline_manager =
> > pipeline.setup_pipeline()
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup   File
> > "/usr/lib/python2.6/site-packages/ceilometer/pipeline.py", line 524, in
> > setup_pipeline
> > 2014-05-27 15:19:59.182 4969 TRACE
> > ceilometer.openstack.common.threadgroup     with open(cfg_file) as fap:
> > 2014-05-27 15:19:59.182 4969 TRACE
> ceilometer.openstack.common.threadgroup
> > TypeError: coercing to Unicode: need string or buffer, NoneType found
> > 2014-05-27 15:19:59.182 4969 TRACE
> ceilometer.openstack.common.threadgroup
> > (END)
> >
> >
> > Regards,
> > Dhanesh
> >
> >
> > On Tue, May 27, 2014 at 2:49 PM, Eoghan Glynn <eglynn at redhat.com> wrote:
> >
> > >
> > > Set debug=True and verbose=True in your ceilometer.conf.
> > >
> > > Restart the ceilometer API service.
> > >
> > > Check /var/log/ceilometer/api.log for errors.
> > >
> > > Similarly for the central agent.
> > >
> > > ----- Original Message -----
> > > > Hi All,
> > > >
> > > >
> > > > 8777 port is not up i started all the service.
> > > >
> > > > I have followed the icehouse document for fedora.
> > > >
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api restart
> > > > Stopping openstack-ceilometer-api:                         [FAILED]
> > > > Starting openstack-ceilometer-api:                         [  OK  ]
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api restart
> > > > Stopping openstack-ceilometer-api:                         [  OK  ]
> > > > Starting openstack-ceilometer-api:                         [  OK  ]
> > > > [root at controller ~]# netstat -atlpn | grep 8777
> > > >
> > > > note: not showing the 8777 port
> > > >
> > > > ceilometer service  status
> > > >
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api status
> > > > openstack-ceilometer-api dead but pid file exists
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-central status
> > > > openstack-ceilometer-central dead but pid file exists
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-collector
> status
> > > > openstack-ceilometer-collector (pid  8905) is running...
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-notification
> > > status
> > > > openstack-ceilometer-agent-notification (pid  10307) is running...
> > > >
> > > >
> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-alarm-notifier
> > > status
> > > > openstack-ceilometer-alarm-notifier (pid  8947) is running...
> > > >
> > > > [root at controller ~]#
> /etc/init.d/openstack-ceilometer-alarm-evaluator
> > > status
> > > > openstack-ceilometer-alarm-evaluator (pid  8926) is running...
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Attaching the ceilometer.conf file along with this mail. Please fing
> the
> > > > attachment.
> > > >
> > > >
> > > >
> > > > Verify the Telemetry installation
> > > >
> > > > To test the Telemetry installation, download an image from the Image
> > > > Service, and use the *ceilometer* command to display usage
> statistics.
> > > >
> > > >    1.
> > > >
> > > >    Use the ceilometer meter-list command to test the access to
> Telemetry:
> > > >
> > > >    $ ceilometer meter-list
> > > >
> > > >
> > > >
> > > > Error:
> > > >
> > > >  ceilometer meter-list
> > > > Error communicating with http://controller:8777 [Errno 111]
> Connection
> > > > refused
> > > >
> > > >
> > > > Regards,
> > > > Dhanesh.
> > > >
> > > >
> > > > On Tue, May 20, 2014 at 3:04 PM, Eoghan Glynn <eglynn at redhat.com>
> wrote:
> > > >
> > > > >
> > > > > What's your configured database connection?
> > > > >
> > > > > (in /etc/ceilometer/ceilometer.conf)
> > > > >
> > > > > If its a sqlalchemy-based URL (e.g. mysql or postgres) have you run
> > > > > ceilometer-dbsync?
> > > > >
> > > > > (either directly, or a side-effect of the installation process)
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > > Hi All,
> > > > > >
> > > > > > ps -fe | grep ceilometer-api
> > > > > >
> > > > > > No process is running.
> > > > > >
> > > > > > status is showing its dead.
> > > > > >
> > > > > >
> > > > > > Api Error log.
> > > > > >
> > > > > > [root at controller ceilometer]# tailf api.log
> > > > > > 2014-05-20 14:42:39.476 10768 WARNING
> > > > > keystoneclient.middleware.auth_token
> > > > > > [-] Configuring auth_uri to point to the public identity
> endpoint is
> > > > > > required; clients may not be able to authenticate against an
> admin
> > > > > endpoint
> > > > > > 2014-05-20 14:42:39.477 10768 INFO
> > > keystoneclient.middleware.auth_token
> > > > > [-]
> > > > > > Using /tmp/keystone-signing-w05DPS as cache directory for signing
> > > > > > certificate
> > > > > > 2014-05-20 14:42:39.877 10768 CRITICAL ceilometer [-]
> > > OperationalError:
> > > > > > (OperationalError) unable to open database file None None
> > > > > >
> > > > > > 2014-05-20 14:49:47.686 12502 INFO
> > > keystoneclient.middleware.auth_token
> > > > > [-]
> > > > > > Starting keystone auth_token middleware
> > > > > > 2014-05-20 14:49:47.687 12502 WARNING
> > > > > keystoneclient.middleware.auth_token
> > > > > > [-] Configuring admin URI using auth fragments. This is
> deprecated,
> > > use
> > > > > > 'identity_uri' instead.
> > > > > > 2014-05-20 14:49:47.687 12502 WARNING
> > > > > keystoneclient.middleware.auth_token
> > > > > > [-] Configuring auth_uri to point to the public identity
> endpoint is
> > > > > > required; clients may not be able to authenticate against an
> admin
> > > > > endpoint
> > > > > >
> > > > > > 2014-05-20 14:49:47.688 12502 INFO
> > > keystoneclient.middleware.auth_token
> > > > > [-]
> > > > > > Using /tmp/keystone-signing-zXbRzr as cache directory for signing
> > > > > > certificate
> > > > > > 2014-05-20 14:49:48.080 12502 CRITICAL ceilometer [-]
> > > OperationalError:
> > > > > > (OperationalError) unable to open database file None None
> > > > > >
> > > > > >
> > > > > >
> > > > > > Regards,
> > > > > > Dhanesh.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Tue, May 20, 2014 at 1:29 PM, Eoghan Glynn <eglynn at redhat.com
> >
> > > wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > Hi All,
> > > > > > > >
> > > > > > > > Please find the error iam getting after finishing the
> ceilometer
> > > > > > > > configuration in controller and compute.
> > > > > > > >
> > > > > > > > Error:
> > > > > > > >
> > > > > > > > [root at compute1 ceilometer]# ceilometer meter-list
> > > > > > > > Error communicating with http://controller:8777 [Errno 111]
> > > > > Connection
> > > > > > > > refused
> > > > > > > >
> > > > > > > > I have started all the services. I noticed 8777 port is not
> > > > > listening.
> > > > > > > >
> > > > > > > > Please gimme some advice.
> > > > > > >
> > > > > > > Check if the ceilometer-api service is actually running on the
> > > expected
> > > > > > > node.
> > > > > > >
> > > > > > > e.g. on Fedora and derivatives with RPMs installed:
> > > > > > >
> > > > > > >   $ sudo service openstack-ceilometer-api status
> > > > > > >
> > > > > > > elsewhere:
> > > > > > >
> > > > > > >   $ ps -fe | grep ceilometer-api
> > > > > > >
> > > > > > > Also check your firewall rules to ensure that the
> ceilometer-api
> > > > > endpoint
> > > > > > > (i.e. port 8777) is accessible from the host on which you run
> the
> > > > > client.
> > > > > > >
> > > > > > > Cheers,
> > > > > > > Eoghan
> > > > > > >
> > > > > > > > I have finished almost all except ceilometer.
> > > > > > > >
> > > > > > > > Attaching the output of #ceilometer --debug meter-list
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Dhanesh
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20140527/aa7a5f19/attachment.html>