Open Stack

Hi dhanesh,
     add this to your config file

log_dir=/var/log/ceilometer

It will work


On Tue, May 27, 2014 at 3:45 PM, dhanesh1212121212 <dhanesh1212 at gmail.com>wrote:

> Yes mongo db is running.
>
> Please find the log details
>
> [root at controller ~]# tailf /var/log/mongodb/mongodb.log
> Tue May 27 15:41:18.259 [conn2] command admin.$cmd command: {
> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
> 0ms
> Tue May 27 15:41:30.929 [DataFileSync] flushing mmaps took 1ms  for 2 files
> Tue May 27 15:41:31.095 [TTLMonitor] query local.system.indexes query: {
> expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0
> keyUpdates:0 locks(micros) r:273 nreturned:0 reslen:20 0ms
> Tue May 27 15:41:33.518 [conn2] run command admin.$cmd { listDatabases:
> 1.0 }
> Tue May 27 15:41:33.519 [conn2] opening db:  ceilometer
> Tue May 27 15:41:33.519 [conn2] command admin.$cmd command: {
> listDatabases: 1.0 } ntoreturn:1 keyUpdates:0 locks(micros) R:2 W:438 r:39
> reslen:181 1ms
> Tue May 27 15:41:33.524 [conn2] run command admin.$cmd { replSetGetStatus:
> 1.0, forShell: 1.0 }
> Tue May 27 15:41:33.524 [conn2] command admin.$cmd command: {
> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
> 0ms
> Tue May 27 15:42:17.588 [conn2] run command admin.$cmd { replSetGetStatus:
> 1.0, forShell: 1.0 }
> Tue May 27 15:42:17.588 [conn2] command admin.$cmd command: {
> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0  reslen:76
> 0ms
> Tue May 27 15:42:30.929 [DataFileSync] flushing mmaps took 1ms  for 4 files
> Tue May 27 15:42:31.095 [TTLMonitor] query ceilometer.system.indexes
> query: { expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0
> nscanned:12 keyUpdates:0 locks(micros) r:176 nreturned:0 reslen:20 0ms
> Tue May 27 15:42:31.095 [TTLMonitor] query local.system.indexes query: {
> expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0
> keyUpdates:0 locks(micros) r:217 nreturned:0 reslen:20 0ms
>
>
> mongod (pid  5210) is running...
> [root at controller ~]# mongo
> mongo         mongodump     mongofiles    mongooplog    mongorestore
> mongosniff    mongotop
> mongod        mongoexport   mongoimport   mongoperf     mongos
> mongostat
> [root at controller ~]# mongo
> MongoDB shell version: 2.4.6
> connecting to: test
> > show dbs
> ceilometer    0.203125GB
> local    0.078125GB
>
>
>
> wat is the cause for 8777 port not able to show up when startiing
> ceilometer api service
>
> Regards,
> Dhanesh.
>
>
>
>
> On Tue, May 27, 2014 at 3:29 PM, Eoghan Glynn <eglynn at redhat.com> wrote:
>
>>
>> > OperationalError: (OperationalError) unable to open database file None
>> None
>>
>> Your config file implies mongodb usage for the metering store:
>>
>>   [database]
>>   connection = mongodb://ceilometer:ceilometer@controller
>> :27017/ceilometer
>>
>> Is mongo installed and running the expected host & port?
>> (controller:27017)
>>
>> ----- Original Message -----
>> > Hi
>> >
>> > please find the log file for ceilometer api
>> >
>> > [root at controller ceilometer]# tailf /var/log/ceilometer/api.log
>> > 2014-05-27 15:16:30.236 4914 WARNING
>> keystoneclient.middleware.auth_token
>> > [-] Configuring auth_uri to point to the public identity endpoint is
>> > required; clients may not be able to authenticate against an admin
>> endpoint
>> > 2014-05-27 15:16:30.237 4914 INFO keystoneclient.middleware.auth_token
>> [-]
>> > Using /tmp/keystone-signing-FvjNMu as cache directory for signing
>> > certificate
>> > 2014-05-27 15:16:30.654 4914 CRITICAL ceilometer [-] OperationalError:
>> > (OperationalError) unable to open database file None None
>> >
>> > 2014-05-27 15:19:08.520 4950 INFO keystoneclient.middleware.auth_token
>> [-]
>> > Starting keystone auth_token middleware
>> > 2014-05-27 15:19:08.521 4950 WARNING
>> keystoneclient.middleware.auth_token
>> > [-] Configuring admin URI using auth fragments. This is deprecated, use
>> > 'identity_uri' instead.
>> > 2014-05-27 15:19:08.521 4950 WARNING
>> keystoneclient.middleware.auth_token
>> > [-] Configuring auth_uri to point to the public identity endpoint is
>> > required; clients may not be able to authenticate against an admin
>> endpoint
>> > 2014-05-27 15:19:08.523 4950 INFO keystoneclient.middleware.auth_token
>> [-]
>> > Using /tmp/keystone-signing-14uzsO as cache directory for signing
>> > certificate
>> > 2014-05-27 15:19:08.913 4950 CRITICAL ceilometer [-] OperationalError:
>> > (OperationalError) unable to open database file None None
>> >
>> > please find the log file for ceilometer central.
>> >
>> > 2014-05-27 15:19:59.182 4969 ERROR
>> ceilometer.openstack.common.threadgroup
>> > [-] coercing to Unicode: need string or buffer, NoneType found
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> ceilometer.openstack.common.threadgroup
>> > Traceback (most recent call last):
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> >
>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py",
>> > line 125, in wait
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     x.wait()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> >
>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py",
>> > line 47, in wait
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     return self.thread.wait()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 168, in
>> > wait
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     return
>> self._exit_event.wait()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/eventlet/event.py", line 116, in wait
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     return
>> hubs.get_hub().switch()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/eventlet/hubs/hub.py", line 187, in
>> switch
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     return
>> self.greenlet.switch()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 194, in
>> > main
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     result = function(*args,
>> > **kwargs)
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> >
>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/service.py",
>> > line 486, in run_service
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     service.start()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/ceilometer/agent.py", line 137, in
>> start
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     self.pipeline_manager =
>> > pipeline.setup_pipeline()
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup   File
>> > "/usr/lib/python2.6/site-packages/ceilometer/pipeline.py", line 524, in
>> > setup_pipeline
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> > ceilometer.openstack.common.threadgroup     with open(cfg_file) as fap:
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> ceilometer.openstack.common.threadgroup
>> > TypeError: coercing to Unicode: need string or buffer, NoneType found
>> > 2014-05-27 15:19:59.182 4969 TRACE
>> ceilometer.openstack.common.threadgroup
>> > (END)
>> >
>> >
>> > Regards,
>> > Dhanesh
>> >
>> >
>> > On Tue, May 27, 2014 at 2:49 PM, Eoghan Glynn <eglynn at redhat.com>
>> wrote:
>> >
>> > >
>> > > Set debug=True and verbose=True in your ceilometer.conf.
>> > >
>> > > Restart the ceilometer API service.
>> > >
>> > > Check /var/log/ceilometer/api.log for errors.
>> > >
>> > > Similarly for the central agent.
>> > >
>> > > ----- Original Message -----
>> > > > Hi All,
>> > > >
>> > > >
>> > > > 8777 port is not up i started all the service.
>> > > >
>> > > > I have followed the icehouse document for fedora.
>> > > >
>> > > >
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api restart
>> > > > Stopping openstack-ceilometer-api:                         [FAILED]
>> > > > Starting openstack-ceilometer-api:                         [  OK  ]
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api restart
>> > > > Stopping openstack-ceilometer-api:                         [  OK  ]
>> > > > Starting openstack-ceilometer-api:                         [  OK  ]
>> > > > [root at controller ~]# netstat -atlpn | grep 8777
>> > > >
>> > > > note: not showing the 8777 port
>> > > >
>> > > > ceilometer service  status
>> > > >
>> > > >
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-api status
>> > > > openstack-ceilometer-api dead but pid file exists
>> > > >
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-central
>> status
>> > > > openstack-ceilometer-central dead but pid file exists
>> > > >
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-collector
>> status
>> > > > openstack-ceilometer-collector (pid  8905) is running...
>> > > >
>> > > > [root at controller ~]# /etc/init.d/openstack-ceilometer-notification
>> > > status
>> > > > openstack-ceilometer-agent-notification (pid  10307) is running...
>> > > >
>> > > >
>> > > > [root at controller ~]#
>> /etc/init.d/openstack-ceilometer-alarm-notifier
>> > > status
>> > > > openstack-ceilometer-alarm-notifier (pid  8947) is running...
>> > > >
>> > > > [root at controller ~]#
>> /etc/init.d/openstack-ceilometer-alarm-evaluator
>> > > status
>> > > > openstack-ceilometer-alarm-evaluator (pid  8926) is running...
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > Attaching the ceilometer.conf file along with this mail. Please
>> fing the
>> > > > attachment.
>> > > >
>> > > >
>> > > >
>> > > > Verify the Telemetry installation
>> > > >
>> > > > To test the Telemetry installation, download an image from the Image
>> > > > Service, and use the *ceilometer* command to display usage
>> statistics.
>> > > >
>> > > >    1.
>> > > >
>> > > >    Use the ceilometer meter-list command to test the access to
>> Telemetry:
>> > > >
>> > > >    $ ceilometer meter-list
>> > > >
>> > > >
>> > > >
>> > > > Error:
>> > > >
>> > > >  ceilometer meter-list
>> > > > Error communicating with http://controller:8777 [Errno 111]
>> Connection
>> > > > refused
>> > > >
>> > > >
>> > > > Regards,
>> > > > Dhanesh.
>> > > >
>> > > >
>> > > > On Tue, May 20, 2014 at 3:04 PM, Eoghan Glynn <eglynn at redhat.com>
>> wrote:
>> > > >
>> > > > >
>> > > > > What's your configured database connection?
>> > > > >
>> > > > > (in /etc/ceilometer/ceilometer.conf)
>> > > > >
>> > > > > If its a sqlalchemy-based URL (e.g. mysql or postgres) have you
>> run
>> > > > > ceilometer-dbsync?
>> > > > >
>> > > > > (either directly, or a side-effect of the installation process)
>> > > > >
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > > Hi All,
>> > > > > >
>> > > > > > ps -fe | grep ceilometer-api
>> > > > > >
>> > > > > > No process is running.
>> > > > > >
>> > > > > > status is showing its dead.
>> > > > > >
>> > > > > >
>> > > > > > Api Error log.
>> > > > > >
>> > > > > > [root at controller ceilometer]# tailf api.log
>> > > > > > 2014-05-20 14:42:39.476 10768 WARNING
>> > > > > keystoneclient.middleware.auth_token
>> > > > > > [-] Configuring auth_uri to point to the public identity
>> endpoint is
>> > > > > > required; clients may not be able to authenticate against an
>> admin
>> > > > > endpoint
>> > > > > > 2014-05-20 14:42:39.477 10768 INFO
>> > > keystoneclient.middleware.auth_token
>> > > > > [-]
>> > > > > > Using /tmp/keystone-signing-w05DPS as cache directory for
>> signing
>> > > > > > certificate
>> > > > > > 2014-05-20 14:42:39.877 10768 CRITICAL ceilometer [-]
>> > > OperationalError:
>> > > > > > (OperationalError) unable to open database file None None
>> > > > > >
>> > > > > > 2014-05-20 14:49:47.686 12502 INFO
>> > > keystoneclient.middleware.auth_token
>> > > > > [-]
>> > > > > > Starting keystone auth_token middleware
>> > > > > > 2014-05-20 14:49:47.687 12502 WARNING
>> > > > > keystoneclient.middleware.auth_token
>> > > > > > [-] Configuring admin URI using auth fragments. This is
>> deprecated,
>> > > use
>> > > > > > 'identity_uri' instead.
>> > > > > > 2014-05-20 14:49:47.687 12502 WARNING
>> > > > > keystoneclient.middleware.auth_token
>> > > > > > [-] Configuring auth_uri to point to the public identity
>> endpoint is
>> > > > > > required; clients may not be able to authenticate against an
>> admin
>> > > > > endpoint
>> > > > > >
>> > > > > > 2014-05-20 14:49:47.688 12502 INFO
>> > > keystoneclient.middleware.auth_token
>> > > > > [-]
>> > > > > > Using /tmp/keystone-signing-zXbRzr as cache directory for
>> signing
>> > > > > > certificate
>> > > > > > 2014-05-20 14:49:48.080 12502 CRITICAL ceilometer [-]
>> > > OperationalError:
>> > > > > > (OperationalError) unable to open database file None None
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > Regards,
>> > > > > > Dhanesh.
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > On Tue, May 20, 2014 at 1:29 PM, Eoghan Glynn <
>> eglynn at redhat.com>
>> > > wrote:
>> > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > > Hi All,
>> > > > > > > >
>> > > > > > > > Please find the error iam getting after finishing the
>> ceilometer
>> > > > > > > > configuration in controller and compute.
>> > > > > > > >
>> > > > > > > > Error:
>> > > > > > > >
>> > > > > > > > [root at compute1 ceilometer]# ceilometer meter-list
>> > > > > > > > Error communicating with http://controller:8777 [Errno 111]
>> > > > > Connection
>> > > > > > > > refused
>> > > > > > > >
>> > > > > > > > I have started all the services. I noticed 8777 port is not
>> > > > > listening.
>> > > > > > > >
>> > > > > > > > Please gimme some advice.
>> > > > > > >
>> > > > > > > Check if the ceilometer-api service is actually running on the
>> > > expected
>> > > > > > > node.
>> > > > > > >
>> > > > > > > e.g. on Fedora and derivatives with RPMs installed:
>> > > > > > >
>> > > > > > >   $ sudo service openstack-ceilometer-api status
>> > > > > > >
>> > > > > > > elsewhere:
>> > > > > > >
>> > > > > > >   $ ps -fe | grep ceilometer-api
>> > > > > > >
>> > > > > > > Also check your firewall rules to ensure that the
>> ceilometer-api
>> > > > > endpoint
>> > > > > > > (i.e. port 8777) is accessible from the host on which you run
>> the
>> > > > > client.
>> > > > > > >
>> > > > > > > Cheers,
>> > > > > > > Eoghan
>> > > > > > >
>> > > > > > > > I have finished almost all except ceilometer.
>> > > > > > > >
>> > > > > > > > Attaching the output of #ceilometer --debug meter-list
>> > > > > > > >
>> > > > > > > > Regards,
>> > > > > > > > Dhanesh
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20140527/62ab2d66/attachment.html>