Open Stack

It works!!!
I didn't read the comments above this parameter carefully.
Thank you very much, Neil.


2013/8/22 Neil Tong <Neil.Tong at evault.com>

> Try changing the following line
>
> Original: swift_store_auth_address = 192.168.0.1:5000/v2.0/
> New: swift_store_auth_address = http://192.168.0.1:5000/v2.0/
>
> If you look at the comments preceding that line it looks like it no method
> is defined it defaults to https.
>
> Neil
> ________________________________________
> From: Piotr Kopec [pkopec17 at gmail.com]
> Sent: Thursday, August 22, 2013 7:39 AM
> To: Neil Tong
> Cc: openstack at lists.openstack.org
> Subject: Re: [Openstack] Glance API shows authentication errno 1 during
> uploading image to swift's container
>
> Thanks for response.
>
> [root at openstack182 swift]# cat /etc/glance/glance-api.conf
> [DEFAULT]
> # Show more verbose log output (sets INFO log level output)
> verbose = True
>
> # Show debugging output in logs (sets DEBUG log level output)
> debug = False
>
> # Which backend scheme should Glance use by default is not specified
> # in a request to add a new image to Glance? Known schemes are determined
> # by the known_stores option below.
> # Default: 'file'
> default_store = swift
>
> # List of which store classes and store class locations are
> # currently known to glance at startup.
> #known_stores = glance.store.filesystem.Store,
> #               glance.store.http.Store,
> #               glance.store.rbd.Store,
> #               glance.store.s3.Store,
> #               glance.store.swift.Store,
>
> # Maximum image size (in bytes) that may be uploaded through the
> # Glance API server. Defaults to 1 TB.
> # WARNING: this value should only be increased after careful consideration
> # and must be set to a value under 8 EB (9223372036854775808).
> #image_size_cap = 1099511627776
>
> # Address to bind the API server
> bind_host = 0.0.0.0
>
> # Port the bind the API server to
> bind_port = 9292
>
> # Log to this file. Make sure you do not set the same log
> # file for both the API and registry servers!
> log_file = /var/log/glance/api.log
>
> # Backlog requests when creating socket
> backlog = 4096
>
> # TCP_KEEPIDLE value in seconds when creating socket.
> # Not supported on OS X.
> #tcp_keepidle = 600
>
> # SQLAlchemy connection string for the reference implementation
> # registry server. Any valid SQLAlchemy connection string is fine.
> # See:
> http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine
> sql_connection = mysql://glance:openstack@192.168.0.1/glance<
> http://192.168.0.1/glance>
>
> # Period in seconds after which SQLAlchemy should reestablish its
> connection
> # to the database.
> #
> # MySQL uses a default `wait_timeout` of 8 hours, after which it will drop
> # idle connections. This can result in 'MySQL Gone Away' exceptions. If you
> # notice this, you can lower this value to ensure that SQLAlchemy
> reconnects
> # before MySQL can drop the connection.
> sql_idle_timeout = 3600
>
> # Number of Glance API worker processes to start.
> # On machines with more than one CPU increasing this value
> # may improve performance (especially if using SSL with
> # compression turned on). It is typically recommended to set
> # this value to the number of CPUs present on your machine.
> workers = 1
>
> # Role used to identify an authenticated user as administrator
> #admin_role = admin
>
> # Allow unauthenticated users to access the API with read-only
> # privileges. This only applies when using ContextMiddleware.
> #allow_anonymous_access = False
>
> # Allow access to version 1 of glance api
> #enable_v1_api = True
>
> # Allow access to version 2 of glance api
> #enable_v2_api = True
>
> # Return the URL that references where the data is stored on
> # the backend storage system.  For example, if using the
> # file system store a URL of 'file:///path/to/image' will
> # be returned to the user in the 'direct_url' meta-data field.
> # The default value is false.
> #show_image_direct_url = False
>
> # ================= Syslog Options ============================
>
> # Send logs to syslog (/dev/log) instead of to file specified
> # by `log_file`
> use_syslog = False
>
> # Facility to use. If unset defaults to LOG_USER.
> #syslog_log_facility = LOG_LOCAL0
>
> # ================= SSL Options ===============================
>
> # Certificate file to use when starting API server securely
> #cert_file = /path/to/certfile
>
> # Private key file to use when starting API server securely
> #key_file = /path/to/keyfile
>
> # CA certificate file to use to verify connecting clients
> #ca_file = /path/to/cafile
>
> # ================= Security Options ==========================
>
> # AES key for encrypting store 'location' metadata, including
> # -- if used -- Swift or S3 credentials
> # Should be set to a random string of length 16, 24 or 32 bytes
> #metadata_encryption_key = <16, 24 or 32 char registry metadata key>
>
> # ============ Registry Options ===============================
>
> # Address to find the registry server
> registry_host = 192.168.0.1
>
> # Port the registry server is listening on
> registry_port = 9191
>
> # What protocol to use when connecting to the registry server?
> # Set to https for secure HTTP communication
> registry_client_protocol = http
>
> # The path to the key file to use in SSL connections to the
> # registry server, if any. Alternately, you may set the
> # GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file
> #registry_client_key_file = /path/to/key/file
>
> # The path to the cert file to use in SSL connections to the
> # registry server, if any. Alternately, you may set the
> # GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file
> #registry_client_cert_file = /path/to/cert/file
>
> # The path to the certifying authority cert file to use in SSL connections
> # to the registry server, if any. Alternately, you may set the
> # GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file
> #registry_client_ca_file = /path/to/ca/file
>
> # When using SSL in connections to the registry server, do not require
> # validation via a certifying authority. This is the registry's equivalent
> of
> # specifying --insecure on the command line using glanceclient for the API
> # Default: False
> #registry_client_insecure = False
>
> # The period of time, in seconds, that the API server will wait for a
> registry
> # request to complete. A value of '0' implies no timeout.
> # Default: 600
> #registry_client_timeout = 600
>
> # Whether to automatically create the database tables.
> # Default: False
> #db_auto_create = False
>
> # ============ Notification System Options =====================
>
> # Notifications can be sent when images are create, updated or deleted.
> # There are three methods of sending notifications, logging (via the
> # log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid
> # message queue), or noop (no notifications sent, the default)
> notifier_strategy = noop
>
> # Configuration options if sending notifications via rabbitmq (these are
> # the defaults)
> rabbit_host = localhost
> rabbit_port = 5672
> rabbit_use_ssl = false
> rabbit_userid = guest
> rabbit_password = guest
> rabbit_virtual_host = /
> rabbit_notification_exchange = glance
> rabbit_notification_topic = notifications
> rabbit_durable_queues = False
>
> # Configuration options if sending notifications via Qpid (these are
> # the defaults)
> qpid_notification_exchange = glance
> qpid_notification_topic = notifications
> qpid_host = 192.168.0.1
> qpid_port = 5672
> qpid_username =
> qpid_password =
> qpid_sasl_mechanisms =
> qpid_reconnect_timeout = 0
> qpid_reconnect_limit = 0
> qpid_reconnect_interval_min = 0
> qpid_reconnect_interval_max = 0
> qpid_reconnect_interval = 0
> qpid_heartbeat = 5
> # Set to 'ssl' to enable SSL
> qpid_protocol = tcp
> qpid_tcp_nodelay = True
>
> # ============ Filesystem Store Options ========================
>
> # Directory that the Filesystem backend store
> # writes image data to
> filesystem_store_datadir = /var/lib/glance/images/
>
> # ============ Swift Store Options =============================
>
> # Version of the authentication service to use
> # Valid versions are '2' for keystone and '1' for swauth and rackspace
> swift_store_auth_version = 2
>
> # Address where the Swift authentication service lives
> # Valid schemes are 'http://' and 'https://'
> # If no scheme specified,  default to 'https://'
> # For swauth, use something like '127.0.0.1:8080/v1.0/<
> http://127.0.0.1:8080/v1.0/>'
> swift_store_auth_address = 192.168.0.1:5000/v2.0/
>
> # User to authenticate against the Swift authentication service
> # If you use Swift authentication service, set it to 'account':'user'
> # where 'account' is a Swift storage account and 'user'
> # is a user in that account
> swift_store_user = service:swift
>
> # Auth key for the user authenticating against the
> # Swift authentication service
> swift_store_key = openstack
>
> # Container within the account that the account should use
> # for storing images in Swift
> swift_store_container = glance
>
> # Do we create the container if it does not exist?
> swift_store_create_container_on_put = True
>
> # What size, in MB, should Glance start chunking image files
> # and do a large object manifest in Swift? By default, this is
> # the maximum object size in Swift, which is 5GB
> swift_store_large_object_size = 5120
>
> # When doing a large object manifest, what size, in MB, should
> # Glance write chunks to Swift? This amount of data is written
> # to a temporary disk buffer during the process of chunking
> # the image file, and the default is 200MB
> swift_store_large_object_chunk_size = 200
>
> # Whether to use ServiceNET to communicate with the Swift storage servers.
> # (If you aren't RACKSPACE, leave this False!)
> #
> # To use ServiceNET for authentication, prefix hostname of
> # `swift_store_auth_address` with 'snet-'.
> # Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
> swift_enable_snet = False
>
> # If set to True enables multi-tenant storage mode which causes Glance
> images
> # to be stored in tenant specific Swift accounts.
> #swift_store_multi_tenant = False
>
> # A list of swift ACL strings that will be applied as both read and
> # write ACLs to the containers created by Glance in multi-tenant
> # mode. This grants the specified tenants/users read and write access
> # to all newly created image objects. The standard swift ACL string
> # formats are allowed, including:
> # <tenant_id>:<username>
> # <tenant_name>:<username>
> # *:<username>
> # Multiple ACLs can be combined using a comma separated list, for
> # example: swift_store_admin_tenants = service:glance,*:admin
> #swift_store_admin_tenants =
>
> # The region of the swift endpoint to be used for single tenant. This
> setting
> # is only necessary if the tenant has multiple swift endpoints.
> #swift_store_region =
>
> # ============ S3 Store Options =============================
>
> # Address where the S3 authentication service lives
> # Valid schemes are 'http://' and 'https://'
> # If no scheme specified,  default to 'http://'
> s3_store_host = 127.0.0.1:8080/v1.0/
>
> # User to authenticate against the S3 authentication service
> s3_store_access_key = <20-char AWS access key>
>
> # Auth key for the user authenticating against the
> # S3 authentication service
> s3_store_secret_key = <40-char AWS secret key>
>
> # Container within the account that the account should use
> # for storing images in S3. Note that S3 has a flat namespace,
> # so you need a unique bucket name for your glance images. An
> # easy way to do this is append your AWS access key to "glance".
> # S3 buckets in AWS *must* be lowercased, so remember to lowercase
> # your AWS access key if you use it in your bucket name below!
> s3_store_bucket = <lowercased 20-char aws access key>glance
>
> # Do we create the bucket if it does not exist?
> s3_store_create_bucket_on_put = False
>
> # When sending images to S3, the data will first be written to a
> # temporary buffer on disk. By default the platform's temporary directory
> # will be used. If required, an alternative directory can be specified
> here.
> #s3_store_object_buffer_dir = /path/to/dir
>
> # When forming a bucket url, boto will either set the bucket name as the
> # subdomain or as the first token of the path. Amazon's S3 service will
> # accept it as the subdomain, but Swift's S3 middleware requires it be
> # in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'.
> #s3_store_bucket_url_format = subdomain
>
> # ============ RBD Store Options =============================
>
> # Ceph configuration file path
> # If using cephx authentication, this file should
> # include a reference to the right keyring
> # in a client.<USER> section
> rbd_store_ceph_conf = /etc/ceph/ceph.conf
>
> # RADOS user to authenticate as (only applicable if using cephx)
> rbd_store_user = glance
>
> # RADOS pool in which images are stored
> rbd_store_pool = images
>
> # Images will be chunked into objects of this size (in megabytes).
> # For best performance, this should be a power of two
> rbd_store_chunk_size = 8
>
> # ============ Delayed Delete Options =============================
>
> # Turn on/off delayed delete
> delayed_delete = False
>
> # Delayed delete time in seconds
> scrub_time = 43200
>
> # Directory that the scrubber will use to remind itself of what to delete
> # Make sure this is also set in glance-scrubber.conf
> scrubber_datadir = /var/lib/glance/scrubber
>
> # =============== Image Cache Options =============================
>
> # Base directory that the Image Cache uses
> image_cache_dir = /var/lib/glance/image-cache/
>
> [keystone_authtoken]
> auth_host = 192.168.0.1
> auth_port = 35357
> auth_protocol = http
> admin_tenant_name = service
> admin_user = glance
> admin_password = openstack
>
> [paste_deploy]
> flavor = keystone
> # Name of the paste configuration file that defines the available pipelines
> config_file = /etc/glance/glance-api-paste.ini
>
> # Partial name of a pipeline in your paste configuration file with the
> # service name removed. For example, if your paste section name is
> # [pipeline:glance-api-keystone], you would configure the flavor below
> # as 'keystone'.
> #flavor=
>
> [root at openstack182 swift]# cat /etc/glance/glance-registry.conf
> [DEFAULT]
> # Show more verbose log output (sets INFO log level output)
> verbose = True
>
> # Show debugging output in logs (sets DEBUG log level output)
> debug = False
>
> # Address to bind the registry server
> bind_host = 0.0.0.0
>
> # Port the bind the registry server to
> bind_port = 9191
>
> # Log to this file. Make sure you do not set the same log
> # file for both the API and registry servers!
> log_file = /var/log/glance/registry.log
>
> # Backlog requests when creating socket
> backlog = 4096
>
> # TCP_KEEPIDLE value in seconds when creating socket.
> # Not supported on OS X.
> #tcp_keepidle = 600
>
> # SQLAlchemy connection string for the reference implementation
> # registry server. Any valid SQLAlchemy connection string is fine.
> # See:
> http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine
> sql_connection = mysql://glance:openstack@192.168.0.1/glance<
> http://192.168.0.1/glance>
>
> # Period in seconds after which SQLAlchemy should reestablish its
> connection
> # to the database.
> #
> # MySQL uses a default `wait_timeout` of 8 hours, after which it will drop
> # idle connections. This can result in 'MySQL Gone Away' exceptions. If you
> # notice this, you can lower this value to ensure that SQLAlchemy
> reconnects
> # before MySQL can drop the connection.
> sql_idle_timeout = 3600
>
> # Limit the api to return `param_limit_max` items in a call to a
> container. If
> # a larger `limit` query param is provided, it will be reduced to this
> value.
> api_limit_max = 1000
>
> # If a `limit` query param is not provided in an api request, it will
> # default to `limit_param_default`
> limit_param_default = 25
>
> # Role used to identify an authenticated user as administrator
> #admin_role = admin
>
> # Whether to automatically create the database tables.
> # Default: False
> #db_auto_create = False
>
> # ================= Syslog Options ============================
>
> # Send logs to syslog (/dev/log) instead of to file specified
> # by `log_file`
> use_syslog = False
>
> # Facility to use. If unset defaults to LOG_USER.
> #syslog_log_facility = LOG_LOCAL1
>
> # ================= SSL Options ===============================
>
> # Certificate file to use when starting registry server securely
> #cert_file = /path/to/certfile
>
> # Private key file to use when starting registry server securely
> #key_file = /path/to/keyfile
>
> # CA certificate file to use to verify connecting clients
> #ca_file = /path/to/cafile
>
> [keystone_authtoken]
> auth_host = 192.168.0.1
> auth_port = 35357
> auth_protocol = http
> admin_tenant_name = service
> admin_user = glance
> admin_password = openstack
>
> [paste_deploy]
> flavor = keystone
> # Name of the paste configuration file that defines the available pipelines
> config_file = /etc/glance/glance-registry-paste.ini
>
> # Partial name of a pipeline in your paste configuration file with the
> # service name removed. For example, if your paste section name is
> # [pipeline:glance-registry-keystone], you would configure the flavor below
> # as 'keystone'.
> #flavor=
>
> Regards
> Piotr
>
>
> 2013/8/22 Neil Tong <Neil.Tong at evault.com<mailto:Neil.Tong at evault.com>>
> Can you give us your glance config?
>
> This is the error that makes me suspect some sort of incorrect SSL config
>
> ClientException: Authorization Failure. Authorization Failed: [Errno 1]
> _ssl.c:490: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown
> protocol
>
> Neil
> ________________________________________
> From: Piotr Kopec [pkopec17 at gmail.com<mailto:pkopec17 at gmail.com>]
> Sent: Thursday, August 22, 2013 7:26 AM
> To: Neil Tong
> Cc: openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
> Subject: Re: [Openstack] Glance API shows authentication errno 1 during
> uploading image to swift's container
>
> No. I think all my services are using just http protocol and just password
> for authentication.
> Part of /etc/keystone/keystone.conf below:
> ```[ssl]
> enable = False
> #certfile = /etc/keystone/ssl/certs/keystone.pem
> #keyfile = /etc/keystone/ssl/private/keystonekey.pem
> #ca_certs = /etc/keystone/ssl/certs/ca.pem
> #cert_required = True
>
> [signing]
> #token_format = PKI
> #certfile = /etc/keystone/ssl/certs/signing_cert.pem
> #keyfile = /etc/keystone/ssl/private/signing_key.pem
> #ca_certs = /etc/keystone/ssl/certs/ca.pem
> #key_size = 1024
> #valid_days = 3650
> #ca_password = None```
>
>
> 2013/8/22 Neil Tong <Neil.Tong at evault.com<mailto:Neil.Tong at evault.com
> ><mailto:Neil.Tong at evault.com<mailto:Neil.Tong at evault.com>>>
>
> Looks like an SSL problem, so you have Keystone setup to use SSL?
>
> Piotr Kopec <pkopec17 at gmail.com<mailto:pkopec17 at gmail.com><mailto:
> pkopec17 at gmail.com<mailto:pkopec17 at gmail.com>>> wrote:
>
>
>
> Hello folks,
>
> I have met problem during configuration of Swift as a backend storage
> service for Glance. I have configured Glance according to Red Hat
> Instalation Guide. Now when I am trying to upload image using glance
> image-create command following message occures:
>
>
>
>
> [root at openstack182 ~]# glance image-create --name="Cirros 0.3.1"
> --disk-format=qcow2 --container-format bare <
> /tmp/images/cirros-0.3.1-x86_64-disk.img
> Request returned failure status.
> 500 Internal Server Error
> The server has either erred or is incapable of performing the requested
> operation.
>     (HTTP 500)
>
> So the problem is with Swift server. Although Swift is able to create
> containers and upload files to them usingswift upload command:
>
>
>
>
> [root at openstack182 ~]# swift upload c4 data3.file
> data3.file
> [root at openstack182 ~]# swift list
> c1
> c2
> c3
> c4
> [root at openstack182 ~]# swift list c4
> data3.file
>
> Glance also works well if the default_store parameter is set to file.
>
> After attempting to upload image to swift's container Glance API logs
> shows there is some problem with authentication:
>
>
>
>
> [root at openstack182 ~]# glance image-create --name="Cirros 0.3.1"
> --disk-format=qcow2 --container-format bare <
> /tmp/images/cirros-0.3.1-x86_64-disk.img
> Request returned failure status.
> 500 Internal Server Error
> The server has either erred or is incapable of performing the requested
> operation.
>     (HTTP 500)
> [root at openstack182 ~]# date
> czw, 22 sie 2013, 14:39:00 CEST
> [root at openstack182 ~]# tail -n 50 /var/log/glance/api.log
> 2013-08-22 14:38:49.316 ERROR glance.api.v1.images
> [f32b8f75-054d-4be0-a048-dd797016d043 f554f1bf0c964ab3843214c0dfabf7a6
> c154fa85885b4589aeb3b76f3a8d8beb] Failed to upload image
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images Traceback (most
> recent call last):
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/glance/api/v1/images.py", line 444, in
> _upload
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
> image_meta['size'])
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/glance/store/swift.py", line 321, in add
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
> self._create_container_if_missing(location.container, connection)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/glance/store/swift.py", line 490, in
> _create_container_if_missing
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
> connection.head_container(container)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/swiftclient/client.py", line 1070, in
> head_container
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images     return
> self._retry(None, head_container, container)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/swiftclient/client.py", line 1022, in
> _retry
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images     self.url,
> self.token = self.get_auth()
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/swiftclient/client.py", line 1010, in
> get_auth
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
> insecure=self.insecure)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/swiftclient/client.py", line 329, in
> get_auth
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
> insecure=insecure)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images   File
> "/usr/lib/python2.6/site-packages/swiftclient/client.py", line 266, in
> get_keystoneclient_2_0
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images     raise
> ClientException('Authorization Failure. %s' % err)
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images ClientException:
> Authorization Failure. Authorization Failed: [Errno 1] _ssl.c:490:
> error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
> 2013-08-22 14:38:49.316 8466 TRACE glance.api.v1.images
>
> Some keystone command output:
>
>
>
>
> [root at openstack182 ~]# keystone user-list
> +----------------------------------+---------+---------+-------+
> |                id                |   name  | enabled | email |
> +----------------------------------+---------+---------+-------+
> | f554f1bf0c964ab3843214c0dfabf7a6 |  admin  |   True  |       |
> | ce494e0d76e44f1e9a4e4bccc5d6d3b2 |  cinder |   True  |       |
> | efa48ad1e0cb4142a7043cdc97ff605e |   ec2   |   True  |       |
> | 39d7c739fc31408c97cae9112a6da056 |  glance |   True  |       |
> | 147bf1212187401e8a21ee18a6e174b1 |   nova  |   True  |       |
> | ac2a95560972434a84583df494b721ba | quantum |   True  |       |
> | 97b1c6a788bc476ba620152c769b20b5 |  swift  |   True  |       |
> +----------------------------------+---------+---------+-------+
> [root at openstack182 ~]# keystone tenant-list
> +----------------------------------+---------+---------+
> |                id                |   name  | enabled |
> +----------------------------------+---------+---------+
> | c154fa85885b4589aeb3b76f3a8d8beb |   demo  |   True  |
> | ae243f7ba98441aea224d712cdd97ed0 | service |   True  |
> +----------------------------------+---------+---------+
>
> [root at openstack182 ~]# keystone service-list
>
> +----------------------------------+----------+--------------+------------------------------+
> |                id                |   name   |     type     |
> description          |
>
> +----------------------------------+----------+--------------+------------------------------+
> | 8d5ec35259d2442e999a709f49e6355d |  cinder  |    volume    |    Cinder
> Volume Service     |
> | e93f78475fd8476895ff7a74fac8842b |   ec2    |     ec2      |   EC2
> Compatibility Layer    |
> | 422c6b4ccb8f4765ab55c51d9fd5d11a |  glance  |    image     |
>  Image Service         |
> | 64dd013cbab24a48a8d3b25423d8c555 | keystone |   identity   |
> Identity Service       |
> | c807829b23444d90a065a0597c691424 |   nova   |   compute    |
> Compute Service        |
> | 97179db088674c35b31b51abf9605bc7 | quantum  |   network    | OpenStack
> Networking service |
> | 72a8718bb35143cfaac726cc7a41e60e |  swift   | object-store |    Object
> Storage Service    |
>
> +----------------------------------+----------+--------------+------------------------------+
>
> Could anyone help me with this issue, please?
>
> All answers are appreciated.
>
> Regards.
>
>  Piotr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130822/e3efb965/attachment.html>