Open Stack

HI all, Another day of failed attempts to get this right. Would appreciate any help you can give. Its been almost 3 weeks and I haven't been able to get past this point.


I have an All-in-one Devstack grizzly deployment here, but I cannot get the networking right no matter how I configure it.


My Physical Host NIC settings are:
-----------------------------------------
auto eth0
iface eth0 inet static
        address 192.168.100.24
        netmask 255.255.255.0
        network 192.168.100.0
        broadcast 192.168.100.255
        gateway 192.168.100.254

#Secondary network not connected to anything(cable not plugged in)
auto eth1
        iface eth1 inet manual
        up ifconfig $IFACE 0.0.0.0 up
        up ip link set $IFACE promisc on
        down ip link set $IFACE promisc off
        down ifconfig $IFACE down
------------------------------------------

What should my localrc file correctly look like? I really dont understand this. Should the floating IPs be on the same subnet as my host IP?
for example, HOST_IP=192.168.100.24/24 with the GW 192.168.100.254       FLOATING_RANGE=192.168.100.0/24

if I dont configure any ips ranges then I always get a 172. IP for my public network and my instances do not get a IP from DHCP services.

Thank you for your help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130801/5ead0d60/attachment.html>