Open Stack

Hi,

Couple of days ago, I updated my guide about this issue. 

Cheers!

On 14 juil. 2012, at 04:03, Travis Rhoden <trhoden at gmail.com> wrote:

> Josh,
> 
> Thanks so much for the pointers.  I did not figure out that libvirt was trying to read /etc/ceph/ceph.conf.  It was in fact being denied by apparmor.  I fixed my problem by editing /etc/apparmor.d/libvirt/TEMPLATE and adding "/etc/ceph/** r," to the template.  Now it works for newly spawned VMs.
> 
> Again, thanks a lot.
> 
>  - Travis
> 
> On Fri, Jul 13, 2012 at 7:40 PM, Josh Durgin <josh.durgin at inktank.com> wrote:
> On 07/13/2012 03:09 PM, Travis Rhoden wrote:
> Was this problem ever resolved?  I'm having the identical issue right now
> (perhaps because I am following Sebastien's guide [0]).  I found this
> question raised on LP [1], but no helpful responses, and no linked bug.  I
> can confirm that I can attach an RBD instance manually through virsh, no
> problem. So it is not a libvirt thing.  It sure appears to be a faulty disk
> attachment definition from OpenStack.
> 
> I didn't notice this launchpad question before, but I'll copy my answer
> below for the mailing list archives:
> 
> Right now the RBD driver in OpenStack requires you to have your monitor addresses in /etc/ceph/ceph.conf. When you have them there, putting them in the libvirt xml is unnecessary. You do have to make sure that the unix user who ends up running qemu/kvm has read access to /etc/ceph/ceph.conf, and e.g. apparmor isn't preventing qemu/kvm from reading it.
> 
> This dependency on /etc/ceph/ceph.conf should be removed in the future.
> 
> 
> I'm running the latest packages on Ubuntu 12.04 for OpensStack (essex) and
> Ceph (argonaut).
> 
> I can confirm when using nova volume-attach it does not matter what device
> you pick, dev/vdb, dev/vdf, whatever.  Always fails.  /dev/vdb manually
> works great.
> 
> If the answer above doesn't help, what error message do you get?
> Is there any info in the libvirt logs for the instance?
> 
> Josh
> 
> [0]
> http://www.sebastien-han.fr/blog/2012/06/10/introducing-ceph-to-openstack/
> [1] https://answers.launchpad.net/nova/+question/201366
> 
>   - Travis
> 
> On Fri, May 25, 2012 at 8:32 PM, Josh Durgin <josh.durgin at inktank.com>wrote:
> 
> On 05/25/2012 01:31 AM, Sébastien Han wrote:
> 
> Hi everyone,
> 
> I setup a ceph cluster and I use the RBD driver for nova-volume.
> I can create volumes and snapshots but currently I can't attach them to
> an instance.
> Apparently the volume is detected as busy but it's not, no matter which
> name I choose.
> I tried from horizon and the command line, same issue.
> 
> $ nova --debug volume-attach de3743be-69be-4ec3-8de3-**fc7df6903a97 12
> 
> /dev/vdc
> connect: (localhost, 5000)
> send: 'POST /v2.0/tokens HTTP/1.1\r\nHost:
> localhost:5000\r\nContent-**Length: 100\r\ncontent-type:
> application/json\r\naccept-**encoding: gzip, deflate\r\naccept:
> application/json\r\nuser-**agent: python-novaclient\r\n\r\n{"**auth":
> 
> {"tenantName": "admin", "passwordCredentials": {"username": "admin",
> "password": "admin"}}}'
> reply: 'HTTP/1.1 200 OK\r\n'
> header: Content-Type: application/json
> header: Vary: X-Auth-Token
> header: Date: Fri, 25 May 2012 08:29:46 GMT
> header: Transfer-Encoding: chunked
> connect: (172.17.1.6, 8774)
> send: u'GET
> /v2/**d1f5d27ccf594cdbb034c8a4123494**e9/servers/de3743be-69be-4ec3-**
> 
> 8de3-fc7df6903a97
> HTTP/1.1\r\nHost: 172.17.1.6:8774
> <http://172.17.1.6:8774>\r\nx-**auth-project-id: admin\r\nx-auth-token:
> 
> 37ff6354b9114178889128175494c6**66\r\naccept-encoding: gzip,
> deflate\r\naccept: application/json\r\nuser-**agent:
> 
> python-novaclient\r\n\r\n'
> reply: 'HTTP/1.1 200 OK\r\n'
> header: X-Compute-Request-Id: req-fc7686dd-7dff-4ea2-b2dd-**be584dadb7c1
> 
> header: Content-Type: application/json
> header: Content-Length: 1371
> header: Date: Fri, 25 May 2012 08:29:46 GMT
> send: u'POST
> /v2/**d1f5d27ccf594cdbb034c8a4123494**e9/servers/de3743be-69be-4ec3-**
> 8de3-fc7df6903a97/os-volume_**attachments
> 
> HTTP/1.1\r\nHost: 172.17.1.6:8774
> <http://172.17.1.6:8774>\r\**nContent-Length: 60\r\nx-auth-project-id:
> 
> 
> admin\r\naccept-encoding: gzip, deflate\r\naccept:
> application/json\r\nx-auth-**token:
> 37ff6354b9114178889128175494c6**66\r\nuser-agent:
> python-novaclient\r\ncontent-**type:
> application/json\r\n\r\n{"**volumeAttachment": {"device": "/dev/vdc",
> 
> "volumeId": 12}}'
> reply: 'HTTP/1.1 200 OK\r\n'
> header: X-Compute-Request-Id: req-4a22f603-4aad-4ae9-99a2-**6a7bcacf974f
> 
> header: Content-Type: application/json
> header: Content-Length: 48
> header: Date: Fri, 25 May 2012 08:29:46 GMT
> $ echo $?
> 0
> 
> See the logs here:
> http://paste.openstack.org/**show/18163/<http://paste.openstack.org/show/18163/>
> 
> 
> Hi Seb,
> 
> It looks like the DeviceIsBusy exception is raised when libvirt
> returns failure for any reason when attaching a volume. Try turning on
> debug logging for libvirt and attaching again, and posting the logs
> from libvirt.
> 
> You might need to upgrade libvirt - the version in Ubuntu 12.04 should
> work, or upstream libvirt 0.9.12.
> 
> Josh
> 
> 
>   If you need more information let me know :)
> Thank you in advance.
> 
> Cheers.
> 
> ~Seb
> 
> 
> ______________________________**_________________
> Mailing list: https://launchpad.net/~**openstack<https://launchpad.net/%7Eopenstack>
> Post to     : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~**openstack<https://launchpad.net/%7Eopenstack>
> More help   : https://help.launchpad.net/**ListHelp<https://help.launchpad.net/ListHelp>
> 
> 
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20120715/36302c5b/attachment.html>