Open Stack

Hi Stuart

osds can only come up once at least the initial mon services are
running and formed a quorum, so lets concentrate at getting the mons
up first.
If using cephx authentication all mon services need to be started at
the same time (a similar time), translated to puppet this means all
the puppet runs on the mons need to be started within a certain time
frame (before the timeout of the mons trying to connect each other).
The reason being that the mons first need to form a quorum before most
of the further actions can happen.

Can you provide some additional information about your setup? Specifically:
- what's your exact puppet modules configuration
- what version are you running?
- please be aware that running on Ubuntu 14.04 is currently not
getting integration tested (currently only Ubuntu 12.04 and CentOS 6
are tested, support for CentOS 7 is in the works).
- how many mons are you running
- are the osds running on the same hosts as the mons
- do you use a single network, or do you use separate cluster/public networks
- do you have a firewall running, if yes, can you share your firewall
configuration (iptables -vnL)
- what exactly did you need to patch?

Cheers,
David

On Mon, Feb 23, 2015 at 8:16 PM, Stuart Fox <stuart at demonware.net> wrote:
> Sorry to ask a question and run, I had a busy weekend. I'll be back on the
> ceph POC later today.
>
> I'll paste some outputs from the puppet runs shortly but essentially, no mon
> or osd comes up.
> I had to patch several manifests to explicitly reference /etc/ceph/ceph.conf
> and given that the puppet module calls a reasonable amount of shell code,
> getting debug info is not easy. The puppet runs exit correctly but no
> service comes up.
> I'm using an almost cut'n'paste from USECASES.md, even down to keeping the
> keys the same.
>
> BR,
> Stuart
>
> On Sun, Feb 22, 2015 at 6:57 AM, David Moreau Simard <dmsimard at iweb.com>
> wrote:
>>
>> Hey Stuart,
>>
>> You might want to look at (and use, if you want) the built-in roles and
>> profiles layer [1] which gives you a good idea of how the module is used.
>>
>> It leverages ceph::profile::params to pass values [2] to other classes
>> such as ceph::profile::osd [3].
>>
>> Another good place to look at how to use the module would be the
>> integration tests [4].
>> Since the module is integration tested, this means we actually use the
>> module to deploy a virtual Ceph cluster and we test that the cluster works -
>> see for example the tests for ceph::profile::osd [4].
>>
>> I'm dmsimard on #puppet-openstack and #openstack-operators if you need a
>> hand to get this to work.
>> This is still a relatively new module in comparison to the likes of
>> puppet-nova and such. Feedback and contributions are appreciated!
>>
>> [1]
>> https://github.com/stackforge/puppet-ceph/tree/master/manifests/profile
>> [2]
>> https://github.com/stackforge/puppet-ceph/blob/master/manifests/profile/params.pp
>> [3]
>> https://github.com/stackforge/puppet-ceph/blob/master/manifests/profile/osd.pp
>> [4]
>> https://github.com/stackforge/puppet-ceph/blob/master/spec/system/ceph_profile_osd_spec.rb
>> --
>> David Moreau Simard
>>
>> From: Andrew Woodward <xarses at gmail.com>
>> Date: Saturday, February 21, 2015 at 4:39 PM
>> To: Stuart Fox <stuart at demonware.net>
>> Cc: "openstack-operators at lists.openstack.org"
>> <openstack-operators at lists.openstack.org>, "puppet-openstack at puppetlabs.com"
>> <puppet-openstack at puppetlabs.com>
>> Subject: Re: [Openstack-operators] Ceph puppet module
>>
>> [+puppet-openstack ml]
>>
>> Stuart,
>>
>> Please review the USECASES.md such as [1]. You should find usable examples
>> there. If you are still having problems please reach out with a more detail
>> about what you configuration you are attempting to deploy. The module
>> authors can be found in #puppet-openstack and are usually lurking on the
>> puppet-openstack mailing list (CC'd).
>>
>>
>> [1]https://github.com/stackforge/puppet-ceph/blob/master/USECASES.md#i-want-to-operate-a-production-cluster
>>
>>
>>
>> On Sat, Feb 21, 2015 at 12:04 AM, Stuart Fox <stuart at demonware.net> wrote:
>>>
>>> Hey all
>>>
>>> Im having a complete nightmare trying to get ceph deployed using the
>>> https://github.com/stackforge/puppet-ceph module. Scant documentation isn't
>>> helping my cause!
>>>
>>> Is anybody else using this module? Im attempting to deploy ceph as a
>>> cinder backend in Juno on Ubuntu 14.04 although I haven't gotten as far as
>>> integration yet.
>>>
>>> Does anyone have working example's I could look at?
>>>
>>> --
>>> BR,
>>> Stuart
>>>
>>> _______________________________________________
>>> OpenStack-operators mailing list
>>> OpenStack-operators at lists.openstack.org
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>>>
>>
>>
>>
>> --
>> Andrew
>> Mirantis
>> Fuel community ambassador
>> Ceph community
>
>
>
>
> --
> BR,
> Stuart
>
> _______________________________________________
> OpenStack-operators mailing list
> OpenStack-operators at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>