Open Stack

Thanks a lot Jeremy. I'm now running the reproduce.sh to see what happens.

> [3] Check-job devstack log:
> 
>http://logs.openstack.org/49/484049/1/check/gate-congress-dsvm-py35-api-my
>sql-ubuntu-xenial-nv/7ae2814/logs/devstacklog.txt.gz

And oops, I linked to and older run of the check-job devstack log. Here¹s
a more appropriate version:
http://logs.openstack.org/53/485053/1/check/gate-congress-dsvm-py35-api-mys
ql-ubuntu-xenial-nv/7f07b73/logs/devstacklog.txt.gz

In this log, I see it successfully installing congress client here:
| Installing collected packages: python-congressclient

|   Running setup.py develop for python-congressclient

| Successfully installed python-congressclient

| + ./stack.sh:main:941                      :   use_library_from_git
python-openstackclient

| + inc/python:use_library_from_git:378      :   local enabled=1
| + inc/python:use_library_from_git:379      :   [[ python-congressclient
= \A\L\L ]]
| + inc/python:use_library_from_git:379      :   [[
,python-congressclient, =~ ,python-openstackclient, ]]
| + inc/python:use_library_from_git:380      :   return 1

(http://logs.openstack.org/53/485053/1/check/gate-congress-dsvm-py35-api-my
sql-ubuntu-xenial-nv/7f07b73/logs/devstacklog.txt.gz#_2017-07-19_06_26_31_5
46)

>From then on there is nothing noteworthy re: congress client until it says
the client is not installed correctly:
| + inc/python:check_libs_from_git:395       :   lib_installed_from_git
python-congressclient

...
| + inc/python:check_libs_from_git:401       :   die 401 'The following
LIBS_FROM_GIT were not installed correct:  python-congressclient¹

(http://logs.openstack.org/53/485053/1/check/gate-congress-dsvm-py35-api-my
sql-ubuntu-xenial-nv/7f07b73/logs/devstacklog.txt.gz#_2017-07-19_06_36_41_2
01)

Clark suggested that perhaps in install for python-congressclient was
going to python2 instead of python3. So I¹m investigating that.

Thanks again!

On 7/19/17, 11:19 AM, "Jeremy Stanley" <fungi at yuggoth.org> wrote:

>On 2017-07-18 12:47:07 -0700 (-0700), Eric K wrote:
>> Hi all, looking for some hints/tips. Thanks so much in advance.
>> 
>> My local python3 devstack setup [2] succeeds, but in check-job a
>>similarly
>> configured devstack setup [1] fails for not installing congress client.
>> 
>> ./stack.sh:1439:check_libs_from_git
>> /opt/stack/new/devstack/inc/python:401:die
>> [ERROR] /opt/stack/new/devstack/inc/python:401 The following
>>LIBS_FROM_GIT
>> were not installed correct: python-congressclient
>> 
>> 
>> It seems that the devstack setup in check-job never attempted to install
>> congress client. Comparing the log [4] in my local run to the log in
>> check-job [3], all these steps in my local log are absent from the
>> check-job log:
>> ++/opt/stack/congress/devstack/settings:source:9
>> CONGRESSCLIENT_DIR=/opt/stack/python-congressclient
>> 
>> ++/opt/stack/congress/devstack/settings:source:52
>> 
>>CONGRESSCLIENT_REPO=git://git.openstack.org/openstack/python-congressclie
>>nt.git
>> 
>> Cloning into '/opt/stack/python-congressclient'
>> 
>> Check python version for : /opt/stack/python-congressclient
>> Automatically using 3.5 version to install
>> /opt/stack/python-congressclient based on classifiers
>> 
>> 
>> Installing collected packages: python-congressclient
>>   Running setup.py develop for python-congressclient
>> Successfully installed python-congressclient
>> 
>> 
>> [1] Check-job config:
>> 
>>https://github.com/openstack-infra/project-config/blob/master/jenkins/job
>>s/congress.yaml#L65
>> 
>>https://github.com/openstack-infra/project-config/blob/master/jenkins/job
>>s/congress.yaml#L111
>> 
>> [2] Local devstack local.conf:
>> https://pastebin.com/qzuYTyAE
>> 
>> [3] Check-job devstack log:
>> 
>>http://logs.openstack.org/49/484049/1/check/gate-congress-dsvm-py35-api-m
>>ysql-ubuntu-xenial-nv/7ae2814/logs/devstacklog.txt.gz
>> 
>> [4] Local devstack log:
>> https://ufile.io/c9jhm
>
>Did you attempt comparison to the local.conf the job used?
>
>http://logs.openstack.org/49/484049/1/check/gate-congress-dsvm-py35-api-my
>sql-ubuntu-xenial-nv/7ae2814/logs/local.conf.txt.gz
>
>Also, if you haven't seen it, every devstack-gate run includes a
>convenience script you should be able to use to reproduce locally
>with the same settings:
>
>http://logs.openstack.org/49/484049/1/check/gate-congress-dsvm-py35-api-my
>sql-ubuntu-xenial-nv/7ae2814/logs/reproduce.sh
>
>Further, https://review.openstack.org/484158 seems to have changed
>the behavior of the job since the log you posted from the 14th. Is
>the result still the same in this case?
>-- 
>Jeremy Stanley
>__________________________________________________________________________
>OpenStack Development Mailing List (not for usage questions)
>Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev