Open Stack

Hi Samer,

The fuel-slave-* VM's can't get DHCP settings from network. It looks like
the problem with network settings, the order of them is wrong.
On the picture they are mixed (vboxnet2, vboxnet0, vboxnet1), the correct
order is by the number (vboxnet0, vboxnet1, vboxnet2).
Also, if you modify or create them manualy - they shouldn't work as
expected!

Please try from the scratch, stop and remove all the VM's (fuel-master,
fuel-slave-1, fuel-slave-2, fuel-slave-3),
then go to the setting and remove all the networks: Host-only (vboxnet0,
vboxnet1, vboxnet2) and NAT networks (if any).
Finally run launch.sh again. All the networks will be recreated with the
correct settings.



On Fri, Mar 11, 2016 at 5:22 PM, Samer Machara <
samer.machara at telecom-sudparis.eu> wrote:

> Hello,
>   Sorry, I don't know what I'm missing. After executing the script,
> everything seems OK but in the Fuel UI I have the following message:
>
> "A pool of one or more unallocated nodes is needed for this operation.
> To add to the pool,configure nodes to boot from the network (a.k.a. PXE
> booting).
> Fuel will automatically provision and discover the nodes."
>
> So I check the VMs slaves, and I have this message:
> I reboot the VMs but apparently they do not find the any OS.
>
>
>
> I check the network configuration of vms and it looks OK.
>
>
>
>
>
> Here are the outputs from the script:
>
> samer at samerWS01:~/virtualbox$ ./launch.sh
> Checking for 'expect'... OK
> If you run this script under Cygwin, you may have to add path to
> VirtualBox directory to your PATH.
> Usually it is enough to run "export PATH=$PATH:"/cygdrive/c/Program
> Files/Oracle/VirtualBox"
> Checking for "VBoxManage"... OK
> Checking for VirtualBox Extension Pack... OK
> Checking for Mirantis OpenStack ISO image... OK
> Going to use Mirantis OpenStack ISO file iso/MirantisOpenStack-7.0.iso
> Checking if SSH client installed... OK
> Checking if ipconfig or ifconfig installed... OK
> Setup is done.
> Deleting host-only interface: vboxnet2...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Deleting host-only interface: vboxnet0...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Deleting host-only interface: vboxnet1...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface vboxnet0 was successfully created
> Disabling DHCP server on interface: vboxnet0...
> Configuring IP address 10.20.0.1 and network mask 255.255.255.0 on
> interface: vboxnet0...
> + VBoxManage hostonlyif ipconfig vboxnet0 --ip 10.20.0.1 --netmask
> 255.255.255.0
> + set +x
> Verifying interface vboxnet0 has IP 10.20.0.1 and mask 255.255.255.0
> properly set.
> OK.
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface vboxnet1 was successfully created
> Disabling DHCP server on interface: vboxnet1...
> Configuring IP address 172.16.0.254 and network mask 255.255.255.0 on
> interface: vboxnet1...
> + VBoxManage hostonlyif ipconfig vboxnet1 --ip 172.16.0.254 --netmask
> 255.255.255.0
> + set +x
> Verifying interface vboxnet1 has IP 172.16.0.254 and mask 255.255.255.0
> properly set.
> OK.
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface vboxnet2 was successfully created
> Disabling DHCP server on interface: vboxnet2...
> Configuring IP address 172.16.1.1 and network mask 255.255.255.0 on
> interface: vboxnet2...
> + VBoxManage hostonlyif ipconfig vboxnet2 --ip 172.16.1.1 --netmask
> 255.255.255.0
> + set +x
> Verifying interface vboxnet2 has IP 172.16.1.1 and mask 255.255.255.0
> properly set.
> OK.
> Virtual machine 'fuel-master' is created and registered.
> UUID: da6a8351-1f91-4b79-8ba6-9b3138f06bae
> Settings file: '/home/samer/VirtualBox VMs/fuel-master/fuel-master.vbox'
> Adding hostonly adapter to fuel-master and bridging with host NIC
> vboxnet0...
> Adding disk to fuel-master, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: fbfc46aa-7256-499d-8910-dfe89d44506c
> Adding serial numbers of disks to fuel-master...
>
> Adding hostonly adapter to fuel-master and bridging with host NIC
> vboxnet1...
> Adding NAT adapter to fuel-master for outbound network access through the
> host system...
> VBoxManage: error: Machine 'fuel-master' is not currently running
>
> Waiting for VM "fuel-master" to power on...
> VM "fuel-master" has been successfully started.
> Waiting for product VM to install. Please do NOT abort the script...
> Checking for internet connectivity on the host system... OK
> Checking local DNS configuration... OK
> Enabling outbound network/internet access for the product VM...
> Waiting until the network services are restarted...
> OK
>
> Master node has been installed.
>
>
> Virtual machine 'fuel-slave-1' is created and registered.
> UUID: 31ff8571-4964-44db-9e22-28117e3873f0
> Settings file: '/home/samer/VirtualBox VMs/fuel-slave-1/fuel-slave-1.vbox'
> Adding hostonly adapter to fuel-slave-1 and bridging with host NIC
> vboxnet0...
> Adding disk to fuel-slave-1, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: 0eb39f84-c24e-490b-ace7-bb6f8f075c5f
> Adding serial numbers of disks to fuel-slave-1...
> Adding hostonly adapter to fuel-slave-1 and bridging with host NIC
> vboxnet1...
> Adding hostonly adapter to fuel-slave-1 and bridging with host NIC
> vboxnet2...
>
> Adding disk to fuel-slave-1, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: 7bf07e76-a432-4e39-a51f-0b47a686fae8
> Adding serial numbers of disks to fuel-slave-1...
> Adding disk to fuel-slave-1, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: 2ee57e0e-eafd-44a9-b837-c97ebeaefb32
> Adding serial numbers of disks to fuel-slave-1...
> Waiting for VM "fuel-slave-1" to power on...
> VM "fuel-slave-1" has been successfully started.
>
>
> Virtual machine 'fuel-slave-2' is created and registered.
> UUID: 6bad1f58-ba85-4828-b38f-fe31c9808a48
> Settings file: '/home/samer/VirtualBox VMs/fuel-slave-2/fuel-slave-2.vbox'
> Adding hostonly adapter to fuel-slave-2 and bridging with host NIC
> vboxnet0...
> Adding disk to fuel-slave-2, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: b40e1ccd-27f5-4721-8656-2efd50533f01
> Adding serial numbers of disks to fuel-slave-2...
> Adding hostonly adapter to fuel-slave-2 and bridging with host NIC
> vboxnet1...
> Adding hostonly adapter to fuel-slave-2 and bridging with host NIC
> vboxnet2...
>
> Adding disk to fuel-slave-2, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: d3cdc176-7498-4fb8-8a26-4b888c504c7c
> Adding serial numbers of disks to fuel-slave-2...
> Adding disk to fuel-slave-2, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: 19b679d1-1df2-401b-a55a-b609cbebe43b
> Adding serial numbers of disks to fuel-slave-2...
> Waiting for VM "fuel-slave-2" to power on...
> VM "fuel-slave-2" has been successfully started.
>
>
> Virtual machine 'fuel-slave-3' is created and registered.
> UUID: b323ef72-746f-4eba-ad03-774ea0de2583
> Settings file: '/home/samer/VirtualBox VMs/fuel-slave-3/fuel-slave-3.vbox'
> Adding hostonly adapter to fuel-slave-3 and bridging with host NIC
> vboxnet0...
> Adding disk to fuel-slave-3, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: e8f74bab-1cdd-4ac8-bcf0-72d3af6842ec
> Adding serial numbers of disks to fuel-slave-3...
> Adding hostonly adapter to fuel-slave-3 and bridging with host NIC
> vboxnet1...
> Adding hostonly adapter to fuel-slave-3 and bridging with host NIC
> vboxnet2...
>
> Adding disk to fuel-slave-3, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: c25ab584-146b-454c-b2a5-89310edeedff
> Adding serial numbers of disks to fuel-slave-3...
> Adding disk to fuel-slave-3, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: 120ad4dc-0e9a-4c59-af89-5f24672cf68a
> Adding serial numbers of disks to fuel-slave-3...
> Waiting for VM "fuel-slave-3" to power on...
> VM "fuel-slave-3" has been successfully started.
>
> Slave nodes have been created. They will boot over PXE and get discovered
> by the master node.
> To access master node, please point your browser to:
>     http://10.20.0.2:8000/
> The default username and password is admin:admin
> samer at samerWS01:~/virtualbox$
>
>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
>


-- 
Best Regards,
Maksim Malchuk,
Senior DevOps Engineer,
MOS: Product Engineering,
Mirantis, Inc
<vgordon at mirantis.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 57.png
Type: image/png
Size: 31426 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 57-01.png
Type: image/png
Size: 25532 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0008.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 34-01.png
Type: image/png
Size: 59091 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 51.png
Type: image/png
Size: 128592 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 52.png
Type: image/png
Size: 61370 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0011.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 34-02.png
Type: image/png
Size: 140301 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0012.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20.png
Type: image/png
Size: 64207 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20160311/a546ed5b/attachment-0013.png>