Open Stack

Xav,

The discussion is very important, and hence why both Kyle and I have been
posting these questions on the operator (and dev) lists. Unfortunately, I
wasn't subscribed to the operator's list and missed some responses to
Kyle's message, which were posted only to that list.

As a result, I had an incomplete picture and posted this thread to see if
it was OK to do this without backward compatibility, based on the
(incorrect) assumption that there was no production use. That is corrected
now, and I'm getting all the messages and thanks to everyone, have input on
messages I missed.

So given that, let's try a reset on the discussion, so that I can better
understand the issues...

Do you feel that not having backward compatibility (but having a migration
path) would seriously affect you or would it be manageable?

Is there pain for the customers beyond learning about the new API changes
and capabilities (something that would apply whether there is backward
compatibility or not)?

I was thinking that backward incompatible changes would adversely affect
people who were using client scripts/apps to configure (a large number of)
IPsec connections, where they'd have to have client scripts/apps in-place
to support the new API.

Would there be customers that would fall into that category, or are
customers manually configuring IPSec connections in that they could just
use the new API?

Are there other adverse effects of not having backward compatibility that
need to be considered?

Specifically, we're talking about the VPN service create API no longer
taking a subnet ID (instead an endpoint group is create that contains the
subnet ID), and the IPSec site-to-site connection create API would no
longer take a list of peer CIDRs, but instead would take a pair of endpoint
group IDs (one for the local subnet(s) formally specified by the service
API, and one for peer CIDRs).


Regards,

Paul Michali (pc_m)


On Mon, Aug 24, 2015 at 5:32 PM Xav Paice <xavpaice at gmail.com> wrote:

> I'm sure I'm not the only one that finds the vast amount of traffic in the
> dev list to be completely unmanageable to catch the important messages -
> the ops list is much lower traffic, and as an operator I pay a bunch more
> attention to it.  The discussion of deprecating an API is something that
> HAS to be discussed with operators, on the operators list or highlighted
> somehow so that people get attention drawn to the message.
>
> Let's be clear - I fully appreciate the extra effort that would be
> required in supporting both the new and the old APIs, and also would
> absolutely love to see the new feature.  I do think we need to be able to
> support our customers in the transition, and extra pain for them results in
> lower uptake of the services we provide.
>
> On 25 August 2015 at 09:27, Xav Paice <xavpaice at gmail.com> wrote:
>
>> Also:
>>
>>
>> http://lists.openstack.org/pipermail/openstack-operators/2015-August/007928.html
>>
>> http://lists.openstack.org/pipermail/openstack-operators/2015-August/007891.html
>>
>>
>> On 25 August 2015 at 09:09, Kevin Benton <blak111 at gmail.com> wrote:
>>
>>> It sounds like you might have missed a couple responses:
>>>
>>>
>>> http://lists.openstack.org/pipermail/openstack-operators/2015-August/007903.html
>>>
>>> http://lists.openstack.org/pipermail/openstack-operators/2015-August/007910.html
>>>
>>>
>>> On Mon, Aug 24, 2015 at 1:53 PM, Paul Michali <pc at michali.net> wrote:
>>>
>>>> Xav,
>>>>
>>>> In the email, there were no responses of anyone using VPNaaS *in a
>>>> production environment*. Summary from responders:
>>>>
>>>> Erik M - Tried in Juno with no success. Will retry.
>>>> Edgar M - said no reports from operators about VPNaaS code
>>>> Sam S - Using VPN in VMs and not VPNaaS
>>>> Kevin B - Not used. Use VMs instead
>>>> Sriram S - Indicating not used.
>>>>
>>>> If I misread the responses, or if someone has not spoken up, right now
>>>> is the time to let us know of your situation and the impact this proposal
>>>> would have on your use of VPNaaS IPSec site-to-site connections.
>>>>
>>>> The request here, is that if operators are not using this in a
>>>> production deployment where they need backward compatibility, then we'd
>>>> like to avoid having to provide the complexity needed to support backward
>>>> compatibility.
>>>>
>>>> In the proposal, there are two APIs that would be changed with this
>>>> enhancement. It's detailed in reference [1], and I can elaborate, if needed.
>>>>
>>>> Please keep in mind, that users/operators using previous versions, can
>>>> upgrade to the new version, and any existing VPNaaS configuration will be
>>>> automatically migrated to the new table structures, so that existing IPSec
>>>> connections would continue to operate with the new release.
>>>>
>>>> The proposal would not support using the older APIs, once the new APIs
>>>> are available. Client apps/scripts would need to be updated to use the new
>>>> API (neutron client and the Horizon dashboard will be updated as part of
>>>> the overall effort).
>>>>
>>>> I hope that clarifies the discussion.
>>>>
>>>> Regards,
>>>>
>>>> Paul Michali (pc_m)
>>>>
>>>>
>>>> On Mon, Aug 24, 2015 at 3:50 PM Xav Paice <xavpaice at gmail.com> wrote:
>>>>
>>>>> On 25/08/15 06:32, Paul Michali wrote:
>>>>>
>>>>> As part of the effort to provide support for multiple local subnets
>>>>> for VPNaaS IPSec connections, there are three API changes planned [1].
>>>>>
>>>>> One is to add a new "endpoint groups" API that will describe what is
>>>>> being connected. This is the place were local and peer subnets will be
>>>>> specified. It will allow future VPN flavors to reuse this API for other
>>>>> types of VPN endpoints.
>>>>>
>>>>> The second is to modify the IPSec site connection API to make use of
>>>>> this new endpoint groups API and no longer use the peer CIDRs arguments.
>>>>>
>>>>> The third is to remove the subnet ID from the VPN service API, and
>>>>> again, use the new endpoint groups API for this information (and to allow
>>>>> >1).
>>>>>
>>>>> A previous email send out from Kyle Mestery, asking about the
>>>>> production usage of VPNaaS, did not indicate that this service was used in
>>>>> production by operators.
>>>>>
>>>>>
>>>>> Not true.  There were replies indicating that it is indeed in use, but
>>>>> perhaps not from operators of installations deemed significant enough -
>>>>> what's the criteria here?
>>>>>
>>>>>
>>>>> As a result, we'd like to propose making this change as a non-backward
>>>>> compatible change, which greatly reduces the effort.
>>>>>
>>>>> The change WILL support migration, so older databases can be migrated
>>>>> to the new schema and continue to operate, with future changes using the
>>>>> new API. This gives a smooth upgrade path to the new capability.
>>>>>
>>>>> The change would NOT support the older API in parallel with the new
>>>>> API, so users upgrading would need to also update any client scripts/tools
>>>>> to use the revised/new VPN API.
>>>>>
>>>>>
>>>>> How will this integrate with Horizon?  The majority of our users don't
>>>>> use the API directly, but use Horizon for the config, does this mean we'll
>>>>> be tied in to using a particular version of Horizon to match Neutron?
>>>>>
>>>>>
>>>>> If this is acceptable to operators, we'd like to go forward with these
>>>>> plans. Please respond within 7 days of this email, if you have concerns
>>>>> about the proposal.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Paul Michali (IRC pc_m)
>>>>> VPNaaS Core
>>>>>
>>>>> Ref: https://review.openstack.org/#/c/191944/
>>>>>
>>>>>
>>>>> __________________________________________________________________________
>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribehttp://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>
>>>>>
>>>>>
>>>>> __________________________________________________________________________
>>>>> OpenStack Development Mailing List (not for usage questions)
>>>>> Unsubscribe:
>>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>>
>>>>
>>>>
>>>> __________________________________________________________________________
>>>> OpenStack Development Mailing List (not for usage questions)
>>>> Unsubscribe:
>>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Kevin Benton
>>>
>>>
>>> __________________________________________________________________________
>>> OpenStack Development Mailing List (not for usage questions)
>>> Unsubscribe:
>>> OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>>>
>>>
>>
> __________________________________________________________________________
> OpenStack Development Mailing List (not for usage questions)
> Unsubscribe: OpenStack-dev-request at lists.openstack.org?subject:unsubscribe
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-dev/attachments/20150825/8cd617a8/attachment.html>