August 2022 - openstack-discuss - lists.openstack.org

[tc] August 2022 OpenInfra Board Sync
by Jeremy Stanley 11 Aug '22

11 Aug '22

The Open Infrastructure Foundation Board of Directors is endeavoring to engage in regular check-ins with official OpenInfra projects. The goal is for a loosely structured discussion one-hour in length, involving members of the board and the OpenStack TC, along with other interested community members. This is not intended to be a formal presentation, and no materials need to be prepared in advance. I've started an Etherpad where participants can brainstorm potential topics of conversation, time-permitting: https://etherpad.opendev.org/p/2022-08-board-openstack-sync I've also created a Framadate poll has in order to identify a few preferred dates and times. Responses must be submitted by Friday, 2022-07-15, in order to provide the board members with time to pick from the available options. The poll can be found here: https://framadate.org/atdFRM8YeUtauSgC Feel free to reply here on the mailing list, or you can reach out to me directly by E-mail or as fungi in the #openstack-tc IRC channel, with any questions you may have. -- Jeremy Stanley

1 3

[kolla] Best way to restart controllers
by Yves Gd 11 Aug '22

11 Aug '22

Hi all, We are looking for the best way to process system upgrades on our controller nodes and especially the best way to restart them (we have 3 controllers nodes with routers ha). If we just restart them one by one (waiting long time between each), we have already seen rabbitmq cluster errors (needing a complete restart of rabbitmq). With a kolla stop, a restart and a kolla deploy, some docker containers are restarted on others nodes. The administration guides describes how to add or remove a node but not this simple case. How do you proceed securely? Thanks for all, Yves

1 0

[all][tc] Technical Committee next weekly meeting on 2022 Aug 11 at 1500 UTC
by Ghanshyam Mann 10 Aug '22

10 Aug '22

Hello Everyone, The technical Committee's next weekly meeting is scheduled for 2022 Aug 11, at 1500 UTC. If you would like to add topics for discussion, please add them to the below wiki page by Wednesday, Aug 10 at 2100 UTC. https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting -gmann

1 1

[cinder] Bug deputy report for week of 08-10-2022
by Sofia Enriquez 10 Aug '22

10 Aug '22

This is a bug report from 08-03-2022 to 08-10-2022. Agenda: https://etherpad.opendev.org/p/cinder-bug-squad-meeting ----------------------------------------------------------------------------------------- Low - https://bugs.launchpad.net/cinder/+bug/1984169 "RBD pool stats are reported inaccurately." Fix proposed to master. - https://bugs.launchpad.net/cinder/+bug/1984000 "Infinidat Cinder driver consistency groups feature is broken." Fix proposed to master. Cheers, Sofia -- Sofía Enriquez she/her Software Engineer Red Hat PnT <https://www.redhat.com> IRC: @enriquetaso @RedHat <https://twitter.com/redhat> Red Hat <https://www.linkedin.com/company/red-hat> Red Hat <https://www.facebook.com/RedHatInc> <https://www.redhat.com>

1 0

[neutron][ovn] ovn-bgp-agent EVPN mode question
by Satish Patel 10 Aug '22

10 Aug '22

Folks, I am trying to set up the following lab and so far everything looks good and working but I have some doubts or questions to make sure it's really working as expected. Lab Ref: https://ltomasbo.wordpress.com/2021/06/25/openstack-networking-with-evpn/ rack-1-host-1 (controller) rack-1-host-2 (compute1 - This is hosting cr-lrp ports, inshort router) rack-2-host-1 (compute2) I have created two vms vagrant@rack-1-host-1:~$ nova list nova CLI is deprecated and will be a removed in a future release +--------------------------------------+------+--------+------------+-------------+--------------------------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+------+--------+------------+-------------+--------------------------------------+ | aecb4f10-c46f-4551-b112-44e4dc007e88 | vm1 | ACTIVE | - | Running | private-test=10.0.0.105 | | ceae14b9-70c2-4dbc-8071-0d64d9a0ca84 | vm2 | ACTIVE | - | Running | private-test=10.0.0.86, 172.16.1.200 | +--------------------------------------+------+--------+------------+-------------+--------------------------------------+ # on rack-1-host-2 when i spun up vm2 which endup on rack-1-host-2 hence it created vrf-2001 on dummy lo-2001 interface and exposed vm2 ip address 10.0.0.86/32 96: vrf-2001: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP group default qlen 1000 link/ether 22:cc:25:b3:7b:96 brd ff:ff:ff:ff:ff:ff 97: br-2001: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-2001 state UP group default qlen 1000 link/ether 0a:c3:23:7a:8f:0c brd ff:ff:ff:ff:ff:ff inet6 fe80::851:67ff:fe64:b2c3/64 scope link valid_lft forever preferred_lft forever 98: vxlan-2001: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-2001 state UNKNOWN group default qlen 1000 link/ether 0a:c3:23:7a:8f:0c brd ff:ff:ff:ff:ff:ff inet6 fe80::8c3:23ff:fe7a:8f0c/64 scope link valid_lft forever preferred_lft forever 99: lo-2001: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-2001 state UNKNOWN group default qlen 1000 link/ether d6:60:da:91:2e:6d brd ff:ff:ff:ff:ff:ff inet 10.0.0.86/32 scope global lo-2001 valid_lft forever preferred_lft forever inet6 fe80::d460:daff:fe91:2e6d/64 scope link valid_lft forever preferred_lft forever # on rack-2-host-1 when i created vm1 which endup on rack-2-host-1 but it doesn't expose the vm ip address. Is that normal behavior? When I attach a floating ip to vm2 then why does my floating ip address not get exposed in BGP? Thank you in advance

1 0

Openstack Graphical processors virtualisation
by KK CHN 10 Aug '22

10 Aug '22

1. Does Openstack support GPU virtualization ? We are running a cloud using ussuri with KVM hypervisors. Is creation of vGPUs possible? Does KVM support GPU virtualization or any limitations? 2. What are the supported GPU types? (GRID GPU or GPUs attached to physical blades ) 3. If it supports GPU attached to physical blades, will live migration of the VM be supported. Will OpenStack be able to identify the next host which has an attached GPU and perform live migration, in case of the Failure of One Blade with attached GPU with resident VM. 4. What are the virtualization options if vGPU options are not supported by a particular GPU model? Thanks in advance, Krish

4 4

[PTG] [ironic] Antelope PTG new Etherpad
by Iury Gregory 10 Aug '22

10 Aug '22

Hello everyone, We changed the etherpad link to track the topics we will discuss at the PTG, instead of https://etherpad.opendev.org/p/ironic-ptg-planing-Columbus-OH we will be using https://etherpad.opendev.org/p/ironic-antelope-ptg Feel free to add any topics =) -- *Att[]'s* *Iury Gregory Melo Ferreira * *MSc in Computer Science at UFCG* *Ironic PTL * *Senior Software Engineer at Red Hat Brazil* *Social*: https://www.linkedin.com/in/iurygregory *E-mail: iurygregory(a)gmail.com <iurygregory(a)gmail.com>*

1 0

Need help on rabbitmq
by AJ_ sunny 10 Aug '22

10 Aug '22

Hi team I am using kolla-ansible based openstack infra and getting below error in logs seems frequent rabbitmq disconnections <0.5023.16> closing AMQP connection <0.5023.16> (10.80.0.13:40356 -> 10.80.0.13:5672 - mod_wsgi:19:d3196668-57e5-46dc-8b69-78d73b5873a0): missed heartbeats from client, timeout: 60s AMQP server on 10.80.0.13:5672 is unreachable: [Errno 104] Connection reset by peer. Trying again in 1 seconds.: ConnectionResetError: [Errno 104] Connection reset by peer Is this bug or any resolution for fixing this issue? Thanks Arihant Jain

4 4

[tacker] IRC meeting on Aug 16 cancelled
by Yasufumi Ogawa 10 Aug '22

10 Aug '22

Hi team, Since many of us are going to have a vacation next week, I'll cancel the meeting on Aug 16th. Thanks, Yasufumi

1 0

Correct way to add firewall rules in tripleo | Wallaby
by Swogat Pradhan 10 Aug '22

10 Aug '22

Hi, I am trying to add a rule for zabbix in my tripleo wallaby setup on top of centos 8 stream. i followed https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/feature… but got the error message: [ERROR]: Failed, module return: {'msg': 'value of action must be one of: append, insert, got: accept', 'failed': True, 'invocation': {'module_args': {'state': 'present', 'action': 'accept', 'jump': 'ACCEPT', 'chain': 'INPUT', 'protocol': 'tcp', 'source': '172.25.161.50', 'ctstate': ['NEW'], 'ip_version': 'ipv4', 'comment': '301 allow zabbix ipv4', 'destination_port': '10050', 'table': 'filter', 'match': [], 'syn': 'ignore', 'flush': False}}, 'warnings': ["The value 10050 (type int) in a string field was converted to '10050' (type string). If this does not look like what you expect, quote the entire value to ensure it does not change."], '_ansible_parsed': True} [ERROR]: Failed, return data: {'stdout': None, 'stderr': None, 'msg': 'value of action must be one of: append, insert, got: accept', 'cmd': None, 'rc': 0, 'failed': True} 2022-07-21 01:27:33.335477 | 48d539a1-1679-1e80-25fd-000000005aa1 | TASK | Manage firewall rules 2022-07-21 01:27:33.351515 | 48d539a1-1679-1e80-25fd-000000005542 | FATAL | Manage firewall rules | overcloud-controller-0 | error={"changed": false, "cmd": null, "msg": "value of action must be one of: append, insert, got: accept", "rc": 0, "stderr": null, "stdout": null} When i tried the following link: https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/15… <https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/15…> my script is running fine but rules are not updated in iptables for zabbix. Can you please suggest a correct approach to open port 10050 in tripleo? With regards, Swogat Pradhan

2 1