August 2021 - openstack-discuss - lists.openstack.org

[wallaby][neutron] OVN Geneve multiple tunnels
by Ammad Syed 16 Aug '21

16 Aug '21

Hi, I am using neutron with ovn geneve. Currently I have two nic ports and I have bonded them in active passive bond in linux and assigned an IP address on vlan tagged interface for overlay network. Is it possible that I can use two or more IP addresses for overlay tunnels between compute hosts ? I am planning to assign an IP on each NIC so that I can have redundancy as well as a pair of tunnel with more throughput between compute hosts ? Ammad

2 1

[release] Release countdown for week R-7, Aug 16 - Aug 20
by Herve Beraud 16 Aug '21

16 Aug '21

Development Focus ----------------- We are entering the last weeks of the Xena development cycle. From now until the final release, we'll send a countdown email like this every week. It's probably a good time for teams to take stock of their library and client work that needs to be completed yet. The non-client library freeze is coming up, followed closely by the client lib freeze. Now is a good time to make decisions on deferring feature work to the next development cycle in order to be able to focus on finishing already-started feature work. Please plan accordingly to avoid any last minute rushes to get key functionality in. General Information ------------------- We are now getting close to the end of the cycle, and will be gradually freezing feature work on the various deliverables that make up the OpenStack release. This coming week is the deadline for general libraries (except client libraries): their last feature release needs to happen before "Non-client library freeze" on September 19. Only bugfixes releases will be allowed beyond this point. When requesting those library releases, you can also include the stable/xena branching request with the review (as an example, see the "branches" section here: https://opendev.org/openstack/releases/src/branch/master/deliverables/pike/… A quick reminder of the upcoming freeze dates. Those vary depending on deliverable type: * General libraries (except client libraries) need to have their last feature release before Non-client library freeze (August 19th). Their stable branches are cut early. * Client libraries (think python-*client libraries) need to have their last feature release before Client library freeze (September 2nd) * Deliverables following a cycle-with-rc model (that would be most services) observe a Feature freeze on that same date, September 2nd. Any feature addition beyond that date should be discussed on the mailing-list and get PTL approval. After feature freeze, cycle-with-rc deliverables need to produce a first release candidate (and a stable branch) before RC1 deadline (Sep 13 - Sep 17). * Deliverables following cycle-with-intermediary model can release as necessary, but in all cases before Final RC deadline (Sep 27 - Oct 01). As we are getting to the point of creating stable/xena branches, this would be a good point for teams to review membership in their xena-stable-maint groups. Once the stable/xena branches are cut for a repo, the ability to approve any necessary backports into those branches for xena will be limited to the members of that stable team. If there are any questions about stable policy or stable team membership, please reach out in the #openstack-stable channel. Finally, now is also a good time to start planning what highlights you want for your deliverables in the cycle highlights. The deadline to submit an initial version for those is set to Feature freeze (September 2nd). Background on cycle-highlights: http://lists.openstack.org/pipermail/openstack-discuss/2021-August/024105.h… Project Team Guide, Cycle-Highlights: https://docs.openstack.org/project-team-guide/release-management.html#cycle… knelson [at] openstack.org/diablo_rojo on IRC is available if you need help selecting or writing your highlights Upcoming Deadlines & Dates -------------------------- Non-client library freeze: Aug 19 (R-7 week) Client library freeze: Sep 02 (R-5 week) Xena-3 milestone: Sep 02 (R-5 week) -- Hervé Beraud Senior Software Engineer at Red Hat irc: hberaud https://github.com/4383/ https://twitter.com/4383hberaud

1 0

[rocky][cinder][lvm] VM LVM leakage to packstack host OS
by Alan Davis 16 Aug '21

16 Aug '21

All, I have an issue with LVM on a rocky packstack installation where the LVM constructs inside the VMs running on the server "leak" into the host OS LVM configuration. Here's the listing of the errors from the OS: [root@stack2 log(keystone_apg-project)]# pvs WARNING: Device for PV ILdbcY-VFCm-fnH6-Y3jc-pdWZ-fnl8-PH3TPe not found or rejected by a filter. WARNING: Device for PV yZy8Xk-foKT-ovjV-0EZv-VxEM-GqiP-WH7k53 not found or rejected by a filter. Couldn't find device with uuid ILdbcY-VFCm-fnH6-Y3jc-pdWZ-fnl8-PH3TPe. Couldn't find device with uuid yZy8Xk-foKT-ovjV-0EZv-VxEM-GqiP-WH7k53. PV VG Fmt Attr PSize PFree /dev/md0 cinder-volumes lvm2 a-- <9.10t 4.87t /dev/sdaa pub_vg lvm2 a-- <250.00g 0 /dev/sdac apg-git-encrypted_vg lvm2 a-- <30.00g 0 /dev/sdah encrypted_vg lvm2 a-- <60.00g <60.00g /dev/sdb2 centos_stack2 lvm2 a-- 74.00g 0 [unknown] encrypted_vg lvm2 a-m <60.00g 0 [unknown] encrypted_vg lvm2 a-m <100.00g <100.00g Here are the current cinder.conf lines that seem relevant: # Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to # thin if thin is supported. (string value) # Possible values: # default - <No description provided> # thin - <No description provided> # auto - <No description provided> lvm_type = default # LVM conf file to use for the LVM driver in Cinder; this setting is ignored if # the specified file does not exist (You can also specify 'None' to not use a # conf file even if one exists). (string value) #lvm_conf_file = /etc/cinder/lvm.conf # Suppress leaked file descriptor warnings in LVM commands. (boolean value) #lvm_suppress_fd_warnings = false I think there are several things going on here : duplicate VG names causing LVM to see UUID/name conflicts and "leakage" of LVM data that cinder should be managing to the OS level. What do I need to change in my configuration to fix this and avoid problems in the future? Thanks -- Alan Davis Principal System Administrator Apogee Research LLC Office : 571.384.8941 x26 Cell : 410.701.0518

2 1

Need a help to recover Openstack
by open infra 15 Aug '21

15 Aug '21

Hi, Openstack was failed and noticed that mariadb-server-1 pod is failing. openstack mariadb-server-0 0/1 Running openstack mariadb-server-1 0/1 CrashLoopBackOff I managed to get logs of each pod. mariadb-server-0 log: https://paste.opendev.org/show/808070/ and https://paste.opendev.org/show/808071/ mariadb-server-1 log: https://paste.opendev.org/show/808067/ I highly appreciate if I can get a hint or steps to resolve this issue. OpenStack is deployed on STX. Regards, Danishka

3 4

Pls help newbie :) bare metal new Ansible deployment
by Nicola Ferrari (#554252) 14 Aug '21

14 Aug '21

Dears, I'm new to the list. We're just trying to introduce a demo install of openstack in our network. Our intention was to use 5 machine, already installed with ubuntu-mini 20.04. ostack1 as control node ostack2 -| ostack3 -| AS COMPUTE NODE ostack4 -| ostack5 -| ostack4 - ostack5 also as block storage node, they are connected on a direct storage (sas) where we deployed lvm with a vg named "cinder_volumes". All nodes both are on a /24 network (192.168.32.0/24) behind a router (32.254) and also on a "private" network (10.255.255.0/24) which just interconnect nodes themselves. We inteded to deploy openstack using openstack-ansible, available on github, last stable release. You can see our user_config as attachment. setup-hosts playbook runs with no errors. setup-infrastructure playbook hangs on RUNNING HANDLER [repo_server : reload nginx] **************************************************************************************** FAILED - RETRYING: reload nginx (1 retries left). fatal: [ostack1_repo_container-aabb6a12]: FAILED! => {"attempts": 5, "changed": false, "msg": "Unable to start service nginx: Job for nginx.service failed because the control process exited with error code.\nSee \"systemctl status nginx.service\" and \"journalctl -xe\" for details.\n"} Looking at log I can see that nginx coudn't start due to "Cannot assign requested address: 99" error. I suppose that must be a mistake in the deploy file? Many thanks for your suggestion, and pls, be sorry for my poor english :) Nick

2 2

[cyborg]Cyborg weekly meeting time slot
by 陈克 14 Aug '21

14 Aug '21

Thanks xinran's advice. So that we can have more time to discuss problems at night~ Thanks, Ke Chen

1 0

[all][tc] What's happening in Technical Committee: summary 13th Aug, 21: Reading: 5 min
by Ghanshyam Mann 13 Aug '21

13 Aug '21

Hello Everyone, Here is this week's summary of the Technical Committee activities. 1. What we completed this week: ========================= * Project Skyline(dashboard) pre-proposal discussion. ** TC discussed the pre-proposal required things for the skyline team need to prepare before the project proposal. Kendall sent it on ML[1]. We will wait for the proposal which will have more implementation details. 2. TC Meetings: ============ * TC held this week meeting on Thursday; you can find the full meeting logs in the below link: - https://meetings.opendev.org/meetings/tc/2021/tc.2021-08-12-15.00.log.html * We will have next week's meeting on Aug 19th, Thursday 15:00 UTC[2]. 3. Activities In progress: ================== TC Tracker for Xena cycle ------------------------------ TC is using the etherpad[3] for Xena cycle working item. We will be checking and updating the status biweekly in the same etherpad. Open Reviews ----------------- * Two open reviews for ongoing activities[4]. Combined PTL/TC Election Season for Yoga ---------------------------------------------------- * Yoga cycle election for PTL and TC will be held combined. * The nomination period officially begins August 17, 2021 23:45. * Please read Helena email for more details[5] Murano Project retirement proposal ------------------------------------------ * During a check on project health, we found that Murano is not active anymore. * No code change in Xena cycle last patch merged 4 months ago: https://review.opendev.org/c/openstack/murano/+/783446 * Core team or PTL are not reachable. * In the TC meeting, we decided to start the proposal for its retirement. If you are using it or interested in maintaining it, please respond to mnaser email on openstack-discuss ML[6] Wallaby testing runtime for centos8 vs centos8-stream ----------------------------------------------------------------- * We continue to discuss it in the TC meeting and we agreed: ** Devstack centos8-stream support can be backported to stable/wallaby with the centos8-stream job. ** We will discuss in PTG whether we should update the TC documentation on testing runtime for stable branch or what to do when centos8 is EOL (in Dec 2021). Project updates ------------------- * Retiring js-openstack-lib [7] Yoga release community-wide goal ----------------------------------------- * Please add the possible candidates in this etherpad [8]. * Current status: Proposed "Secure RBAC" to select for Yoga cycle[9]. PTG planning ---------------- * We are collecting the PTG topics in etherpad[10], feel free to add any topic you would like to discuss. Test support for TLS default: ---------------------------------- * Rico has started a separate email thread over testing with tls-proxy enabled[11], we encourage projects to participate in that testing and help to enable the tls-proxy in gate testing. 4. How to contact the TC: ==================== If you would like to discuss or give feedback to TC, you can reach out to us in multiple ways: 1. Email: you can send the email with tag [tc] on openstack-discuss ML[12]. 2. Weekly meeting: The Technical Committee conduct a weekly meeting every Thursday 15 UTC [13] 3. Office hours: The Technical Committee offers a weekly office hour every Tuesday at 0100 UTC [14] 4. Ping us using 'tc-members' nickname on #openstack-tc IRC channel. [1] http://lists.openstack.org/pipermail/openstack-discuss/2021-August/024088.h… [2] https://wiki.openstack.org/wiki/Meetings/TechnicalCommittee#Next_Meeting [3] https://etherpad.opendev.org/p/tc-xena-tracker [4] https://review.opendev.org/q/project:openstack/governance+status:open [5] http://lists.openstack.org/pipermail/openstack-discuss/2021-August/024093.h… [6] http://lists.openstack.org/pipermail/openstack-discuss/2021-August/024120.h… [7] https://review.opendev.org/c/openstack/governance/+/798540 [8] https://etherpad.opendev.org/p/y-series-goals [9] https://review.opendev.org/c/openstack/governance/+/803783 [10] https://etherpad.opendev.org/p/tc-yoga-ptg [11] http://lists.openstack.org/pipermail/openstack-discuss/2021-June/023000.html [12] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-discuss [13] http://eavesdrop.openstack.org/#Technical_Committee_Meeting [14] http://eavesdrop.openstack.org/#Technical_Committee_Office_hours -gmann

1 0

Octavia
by Chris Lyons 13 Aug '21

13 Aug '21

Octavia group, I created this story to see if I could get some assistance on an Octavia issue I am having with my infra. I did a vanilla install of Openstack Wallaby using the Kolla project with Octavia enabled and auto-configure set. Everything appeared to install fine. When I try to create a load balancer using the horizon console or the cli or through further installs such as cloudfoundry that require a loadbalancer, I get an error from glance about “No image found with tag amphora” even though the image does exist. I hope it is something simple or an oversight on my part. Could I get some ideas or places to look? Story: https://storyboard.openstack.org/#!/story/2009103 Kolla install followed: https://docs.openstack.org/kolla-ansible/latest/reference/networking/octavi… cli output : [root@kolla ~]# openstack image list --tag amphora +--------------------------------------+---------------------+--------+ | ID | Name | Status | +--------------------------------------+---------------------+--------+ | 8f7398e7-7912-43b8-8131-e90f21c91ab4 | amphora | active | | 9bf14389-8521-4fb7-a7db-925f4dea1bf3 | amphora-x64-haproxy | active | +--------------------------------------+---------------------+--------+ [root@kolla ~]# My Infra scripts (relevant): https://github.com/mephmanx/openstack-scripts/blob/32363ef5753fdec381f713c7… I am admin of said infra so if anyone has time or availability (or interest) to log in and take a look I would be happy to provide creds. Thank you for any time that you could provide or offer!

4 11

Backup controller node
by Midhunlal Nb 13 Aug '21

13 Aug '21

Hi team, I have a rocky installed openstack environment and it is working fine.In my set up I have; 1 controller node,2 compute nodes and 1 storage node. Now we are planning to add 1 more controller node as backup.Is it possible to add 1 more controller node in existing set up? if it is possible ,anyone please share the procedure. Thanks & Regards Midhunlal N B +918921245637

1 0

[TripleO] next irc meeting Tuesday 17 August @ 1400 UTC in OFTC #tripleo
by Marios Andreou 12 Aug '21

12 Aug '21

Reminder the next TripleO irc meeting is this coming Tuesday agenda: https://wiki.openstack.org/wiki/Meetings/TripleO one-off items: https://etherpad.opendev.org/p/tripleo-meeting-items (please add any tripleo status/ongoing work etc to the etherpad). Our last meeting was on Aug 03 - you can find logs @ https://meetings.opendev.org/meetings/tripleo/2021/tripleo.2021-08-03-14.00… Hope you can make it, regards, marios

1 0