Open Stack

Thanks. Will check that.  
When I create an instance in the public or private nets they ping.  Why do router ports behave differently than instance ports?  Only the Northbound router port is down and won't ping.   Will check settings ASAP thanks 

Chris. 

Sent from my iPhone

> On Mar 23, 2016, at 7:52 AM, Kevin Benton <kevin at benton.pub> wrote:
> 
> Ok. The same settings should apply to Linux bridge.
> 
> Make sure you have external_network_bridge defined in your L3 agent as an empty value.
> 
> Then your external network should be created with the provider type of 'flat' and the physical network corresponding to the one you have defined in your bridge mappings in the L2 agent  that attaches to the bridge going to your external physical network.
> 
>> On Mar 23, 2016 7:25 AM, <chrishull42 at gmail.com> wrote:
>> Kevin;
>> Thank you Very much.  I'll check.   I did a manual Liberty install so I may have done something wrong.  I am using LinuxBridge (not OpenVSwitch) if that helps.  Will post results to list soon.  Would like to be able to use floating IPs, a more convenient form of ipTables basically.  
>> 
>> Chris. 
>> 
>> Sent from my iPhone
>> 
>>> On Mar 23, 2016, at 7:16 AM, Kevin Benton <kevin at benton.pub> wrote:
>>> 
>>> Do you have external_network_bridge set to an empty value in the l3 agent config? If not, the l3 agent will use a legacy mode of wiring up the port and it's status field may not be ACTIVE.
>>> 
>>> The routers are tested thousands of times in the gate every day, so they work. It's just a matter of getting your configuration correct.
>>> 
>>> Yes, you can use a VM to route as well.
>>> 
>>>> On Mar 23, 2016 7:06 AM, <chrishull42 at gmail.com> wrote:
>>>> Hi all;
>>>> It appears that Liberty Neutron routers do not work.  The Northbound port is always Down.
>>>> 
>>>> What I'd like to do is dedicate an instance (CentOS) to routing between the Public net and other nets.  Has anyone done this.  Setting up the router is trivial.  But I'm a little worried about interaction with Neutron Ports.  I need to assign fixed IPs so I can route from the Internet to a server instance.
>>>> 
>>>> Ideas?
>>>> 
>>>> Thanks
>>>> - Chris.
>>>> 
>>>> Sent from my iPhone
>>>> _______________________________________________
>>>> OpenStack-operators mailing list
>>>> OpenStack-operators at lists.openstack.org
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack-operators/attachments/20160323/62f7e531/attachment.html>