[openstack-dev] [OSSN 0039] Configuring OpenStack deployments to prevent POODLE attacks

Nathan Kinder nkinder at redhat.com
Tue Oct 21 19:47:54 UTC 2014


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Configuring OpenStack deployments to prevent POODLE attacks
- ---

### Summary ###
POODLE (CVE-2014-3566) is a new attack on SSLv3 that allows an active
network-based attacker to recover the plaintext from a secure connection
using a CBC-mode cipher. Unfortunately, all other cipher modes in SSLv3
are also insecure. Therefore, the recommended solution is to disable
SSLv3. We also discuss an alternative option below. Proper mitigation
requires addressing this issue on SSLv3 clients and servers.


### Affected Services / Software ###
Any service using SSLv3. Depending on the backend SSL library, this
can include many components of an OpenStack cloud:

- - OpenStack services
- - OpenStack clients
- - Web servers (Apache, Nginx, etc)
- - SSL/TLS terminators (Stud, Pound, etc)
- - Proxy services (HAProxy, etc)
- - Miscellaneous services (eventlet, syslog, ldap, smtp, etc)


### Discussion ###
The POODLE attack was first announced on 14 Oct 2014 [1]. For a deeper
technical discussion on POODLE, we refer you to the security advisory
at openssl.org [2] and Daniel Franke's write-up [3]. POODLE affects any
SSL/TLS connection that can be downgraded to SSLv3. This requires both
the client and the server to support SSLv3. Due to the way the protocol
negotiations work, an attacker positioned on the network between the
client and the server can force a downgrade to SSLv3 by selectively
dropping network packets.

The best remediation for POODLE is to disable SSLv3 on all clients and
servers that you control. This will protect you regardless of the
mitigation status on the other end of the connection. An alternative
option is to deploy TLS_FALLBACK_SCSV, which will prevent the downgrade
attack, but could still allow SSLv3 connections if that is the only
supported protocol between the client and server. Any connection that
happens over SSLv3 using a CBC-mode cipher would still be vulnerable.

You can use the OpenSSL s_client tool to test if a server allows SSLv3
connections:

    openssl s_client -connect <domain name>:<port> -ssl3

If the server does not support SSLv3, you will see a handshake failure
message. This indicates that the server does not accept SSLv3
connections. Assuming this server also has SSLv2 disabled, which is a
common default today, then no further configuration is needed. If
the handshake from s_client completes, then the server requires some
configuration. Note that you can perform this step for any service
that has SSL/TLS enabled including OpenStack API endpoints.

Testing clients is slightly more cumbersome because there are likely
many more clients than servers throughout the cloud. However, this
test follows a similar pattern. Using the OpenSSL s_server tool, you
can create an endpoint that only accepts SSLv3:

    openssl s_server -cert <filename> -key <filename> -state \
                     -ssl3 -no_ssl2 -no_tls1 -no_tls1_1 -no_tls1_2 \
                     -tlsextdebug

If the client can connect to this endpoint, the client needs to update
their configuration as described below.


### Recommended Actions ###
We recommend disabling SSLv3 altogether and will provide additional
guidance on how to do this below.

If SSLv3 is still required on your system due to client compatibility
concerns, then TLS_FALLBACK_SCSV is your only choice. In this case you
will need an underlying library that supports TLS_FALLBACK_SCSV (such
as OpenSSL 1.0.1j). Applications using OpenSSL will automatically start
using TLS_FALLBACK_SCSV once OpenSSL is updated. You should perform an
audit in your cloud to verify that all SSL/TLS services do use this
new library:

    ldd <path to binary that uses OpenSSL> | grep ssl

Review the output and ensure that it is linked to the new version of
OpenSSL that includes TLS_FALLBACK_SCSV support.

Disabling SSLv3 can be done at either the application level or the
library level. Doing it at the library level ensures consistency
throughout the cloud. However, if you are not already compiling
OpenSSL then this may not fit into your deployment workflow. In this
case, you must consider each application in turn.

If you are able to recompile your SSL/TLS library, then this is likely
the best option. Disabling SSLv3 at the library level ensures
consistency across the system. For OpenSSL, you can use the "no-ssl3"
build option. Then deploy that library to your cloud and verify that
all SSL/TLS services are using the library using the ldd command
discussed above.

If you are unable to recompile your SSL/TLS library, then you should
reconfigure each application that uses SSL/TLS. Each application has
a different way to handle this configuration. We provide the
configuration option for some of the more common applications below:

Apache:
SSLProtocol All -SSLv2 -SSLv3

Nginx:
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

Stud:
Requires code change, see [4].
After code change use --tls option.

Pound:
Requires code change, see [5].
After code change use DisableSSLv3 option.

HAProxy (only version 1.5+ supports SSL/TLS):
Depends on config, see [6].

Postfix SMTP:
smtpd_tls_mandatory_protocols=!SSLv2,!SSLv3

The OpenStack services and python clients do not currently have a
configuration option for the SSL/TLS protocol version. Therefore, the
best way to avoid SSLv3 with OpenStack code today is to ensure that the
underlying SSL/TLS library (OpenSSL in this case) is compiled without
SSLv3 support, as described above.

Once you have updated all of the necessary software in your cloud, we
recommend using the s_client and s_server test procedures described
above to verify that each service is configured as expected.


### Contacts / References ###
This OSSN: https://wiki.openstack.org/wiki/OSSN/OSSN-0039
Original Launchpad Bug: https://bugs.launchpad.net/ossn/+bug/1382270
OpenStack Security ML: openstack-security at lists.openstack.org
OpenStack Security Group: https://launchpad.net/~openstack-ossg
CVE: CVE-2014-3566

[1]:
http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
[2]: https://www.openssl.org/~bodo/ssl-poodle.pdf
[3]: https://www.dfranke.us/posts/2014-10-14-how-poodle-happened.html
[4]: https://github.com/bumptech/stud/pull/138
[5]:
http://www.apsis.ch/pound/pound_list/archive/2014/2014-10/1413471803000
[6]:
http://blog.haproxy.com/2014/10/15/haproxy-and-sslv3-poodle-vulnerability/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJURrhqAAoJEJa+6E7Ri+EVfH8IAKvIL9BDRcGmdh+5x39bNPvl
e1624qYcnTDqBwuVCn/v8l759salAlrgNl5OmeNTS/ohvMm21uCu0F1usRbHtcCE
uPU4OLsSqbaZaanUyNz5R/80kfNYTcrRANdPWAe8Csl2vKgz3rZIWeDOAStLhtuW
QWbEyiLZOBImSJo+JhcNyOa9d7ZBGq837InrTyv5/UmkRNvUSNeggRxEtwI0X2Cr
e7is/nea/rr9O2C6zpvZAPcmO2s1U/Saqajh3wh3iBo428NxSKa8SV8Uf5E6FLpn
D/1WAPUy2Sd5IWn3gGd0RLkdeNjcMeG0PCJvJBHArEKKw8rCjFBVOEzucetB1jU=
=FbEB
-----END PGP SIGNATURE-----



More information about the OpenStack-dev mailing list