Open Stack

You need to enable the VLAN option restart neutron and then you are good to go!

> On Jun 18, 2017, at 9:08 AM, Kevin Benton <kevin at benton.pub> wrote:
> 
> Ok. So the actual error message is "Invalid input for operation: physical_network 'provider1' unknown  for VLAN provider network.".
> 
> That means that in your Neutron server configuration file under the [ml2_type_vlan] section you need to add 'provider1' to the 'network_vlan_ranges' option. 
> 
> 
> 
> On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evonosky at gmail.com <mailto:alex.evonosky at gmail.com>> wrote:
> Kevin-
> 
> Thank you for the tip.  The Debug is attached as well.
> 
> Thank you.
> 
> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <kevin at benton.pub <mailto:kevin at benton.pub>> wrote:
> The openstack command should have an option to enable debugging so you can get the error message. Try openstack --debug
> 
> 
> 
> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evonosky at gmail.com <mailto:alex.evonosky at gmail.com>> wrote:
> Gary-
> 
> Thank you for the feedback.  I issued the command while tailing the log:
> 
> 2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The server could not comply with the request since it is either malformed or otherwise incorrect.
> 2017-06-18 10:24:51.843 12018 INFO neutron.wsgi [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 664dc5e6023140eca0faeb2d0ecc31c2 - 
> 
> 
> As for the ocata config, this was built by using the ocata:
> 
> https://docs.openstack.org/ocata/install-guide-ubuntu/ <https://docs.openstack.org/ocata/install-guide-ubuntu/>
> 
> 
> Thank you.
> 
> 
> 
> 
> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkotton at vmware.com <mailto:gkotton at vmware.com>> wrote:
> Hi,
> 
> Please look in /var/log/neutron/neutron-server.log
> 
> That should provide and exception trace
> 
> Thanks
> 
> Gary
> 
>  
> 
> From: Alex Evonosky <alex.evonosky at gmail.com <mailto:alex.evonosky at gmail.com>>
> Date: Sunday, June 18, 2017 at 5:04 PM
> To: "openstack at lists.openstack.org <mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org <mailto:openstack at lists.openstack.org>>
> Subject: [Openstack] Routed provider networks
> 
>  
> 
> Hello-
> 
>  
> 
> I wanted to test the routed provider networks of Ocata, and following the example config:
> 
>  
> 
> https://docs.openstack.org/ocata/networking-guide/config-routed-networks.html <https://docs.openstack.org/ocata/networking-guide/config-routed-networks.html>
>  
> 
> I typed in the following on my controller node:
> 
>  
> 
>  
> 
> @openstack-controller1:~# openstack network create --share --provider-physical-network provider1 --provider-network-type vlan --provider-segment 2016 multisegment1
> 
>  
> 
> and I receive this:
> 
>  
> 
> Error while executing command: Bad Request
> 
>  
> 
>  
> 
> Is there a log that may show what this error is referring to?
> 
>  
> 
>  
> 
> Thank you.
> 
>  
> 
> 
> 
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack>
> Post to     : openstack at lists.openstack.org <mailto:openstack at lists.openstack.org>
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack <http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack>
> 
> 
> 
> 
> !DSPAM:1,5946a8b7174771029252334! _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> 
> !DSPAM:1,5946a8b7174771029252334!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20170618/c412c0e0/attachment.html>