[Openstack] Routed provider networks
Alex Evonosky
alex.evonosky at gmail.com
Sun Jun 18 16:20:25 UTC 2017
Kevin-
you nailed it:
openstack network create --share --provider-physical-network provider1
--provider-network-type vlan --provider-segment 2016 multisegment1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | UP |
| availability_zone_hints | |
| availability_zones | |
| created_at | 2017-06-18T16:19:33Z |
| description | |
| dns_domain | None |
| id | d607c5db-cd30-4e60-8ba9-d84f82a1e6bd |
| ipv4_address_scope | None |
| ipv6_address_scope | None |
| is_default | None |
| mtu | 1500 |
| name | multisegment1 |
| port_security_enabled | True |
| project_id | 664dc5e6023140eca0faeb2d0ecc31c2 |
| provider:network_type | vlan |
| provider:physical_network | provider1 |
| provider:segmentation_id | 2016 |
| qos_policy_id | None |
| revision_number | 3 |
| router:external | Internal |
| segments | None |
| shared | True |
| status | ACTIVE |
| subnets | |
| updated_at | 2017-06-18T16:19:33Z |
+---------------------------+--------------------------------------+
Thank you for helping on a Sunday!
On Sun, Jun 18, 2017 at 12:16 PM, Remo Mattei <Remo at italy1.com> wrote:
> Its not going to be there.. you need to look into the plugins directory.
>
>
> grep provider *
> ml2_conf.ini:# Default network type for external networks when no provider
> attributes are
> ml2_conf.ini:# specified. By default it is None, which means that if
> provider attributes are
> ml2_conf.ini:# specifying physical_network names usable for VLAN provider
> and tenant
>
>
>
>
> On Jun 18, 2017, at 9:13 AM, Alex Evonosky <alex.evonosky at gmail.com>
> wrote:
>
> Thank you Kevin,
>
> In the /etc/neutron/neutron.conf file, there is no [ml2_type_vlan]
> section under ocata. Do I need to add this section in?
>
> Thank you.
>
> On Sun, Jun 18, 2017 at 12:08 PM, Kevin Benton <kevin at benton.pub> wrote:
>
>> Ok. So the actual error message is "Invalid input for operation:
>> physical_network 'provider1' unknown for VLAN provider network.".
>>
>> That means that in your Neutron server configuration file under the
>> [ml2_type_vlan] section you need to add 'provider1' to the
>> 'network_vlan_ranges' option.
>>
>>
>>
>> On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evonosky at gmail.com>
>> wrote:
>>
>>> Kevin-
>>>
>>> Thank you for the tip. The Debug is attached as well.
>>>
>>> Thank you.
>>>
>>> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <kevin at benton.pub> wrote:
>>>
>>>> The openstack command should have an option to enable debugging so you
>>>> can get the error message. Try openstack --debug
>>>>
>>>>
>>>>
>>>> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evonosky at gmail.com
>>>> > wrote:
>>>>
>>>>> Gary-
>>>>>
>>>>> Thank you for the feedback. I issued the command while tailing the
>>>>> log:
>>>>>
>>>>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource
>>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The
>>>>> server could not comply with the request since it is either malformed or
>>>>> otherwise incorrect.*
>>>>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi
>>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66
>>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - *
>>>>>
>>>>>
>>>>> As for the ocata config, this was built by using the ocata:
>>>>>
>>>>> https://docs.openstack.org/ocata/install-guide-ubuntu/
>>>>>
>>>>>
>>>>> Thank you.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkotton at vmware.com> wr
>>>>> ote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Please look in /var/log/neutron/neutron-server.log
>>>>>>
>>>>>> That should provide and exception trace
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Gary
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From: *Alex Evonosky <alex.evonosky at gmail.com>
>>>>>> *Date: *Sunday, June 18, 2017 at 5:04 PM
>>>>>> *To: *"openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>> *Subject: *[Openstack] Routed provider networks
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hello-
>>>>>>
>>>>>>
>>>>>>
>>>>>> I wanted to test the routed provider networks of Ocata, and following
>>>>>> the example config:
>>>>>>
>>>>>>
>>>>>>
>>>>>> https://docs.openstack.org/ocata/networking-guide/config-rou
>>>>>> ted-networks.html
>>>>>>
>>>>>>
>>>>>>
>>>>>> I typed in the following on my controller node:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> @openstack-controller1:~# openstack network create --share
>>>>>> --provider-physical-network provider1 --provider-network-type vlan
>>>>>> --provider-segment 2016 multisegment1
>>>>>>
>>>>>>
>>>>>>
>>>>>> and I receive this:
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Error while executing command: Bad Request*
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Is there a log that may show what this error is referring to?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/
>>>>> openstack
>>>>> Post to : openstack at lists.openstack.org
>>>>> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/
>>>>> openstack
>>>>>
>>>>>
>>>>
>>>
>>
> !DSPAM:1,5946a6cb169661288915335! ______________________________
> _________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/
> openstack
>
> !DSPAM:1,5946a6cb169661288915335!
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20170618/0e54c1a4/attachment.html>
More information about the Openstack
mailing list