Open Stack

Hi,

After applied these change, is your neutron ml2 configuration correct? Mainly the below parts:
If still cannot work, could you please describe the errors?
Beside these, we find xenserver dom0 lacks of conntrack support for neutron-ovs-agent in compute node, there is a fix waiting for review https://review.openstack.org/#/c/341304/

1.       In nova.conf, two configurations should be set
[DEFAULT]
firewall_driver = nova.virt.firewall.NoopFirewallDriver

security_group_api=neutron

use_neutron = True
[xenserver]
ovs_integration_bridge =
vif_driver = nova.virt.xenapi.vif.XenAPIOpenVswitchDriver
 2.       In neutron,  check configurations ml2_conf.ini in compute node which is used for neutron L2 agent

[agent]

minimize_polling = False

root_helper_daemon =

root_helper = /usr/local/bin/neutron-rootwrap-xen-dom0 /etc/neutron/rootwrap.conf

[ovs]

integration_bridge =

bridge_mappings =
Thanks,
Huan

From: Adhi Priharmanto [mailto:adhi.pri at gmail.com]
Sent: Thursday, September 15, 2016 3:48 PM
To: Huan Xie
Cc: openstack at lists.openstack.org
Subject: Re: [Openstack] Security Groups Can't Apply in Kilo with Neutron & XenServer

Hi, I still no luck for this problem, even I using liberty release, Security groups still not applied on network. can you help me again ?

On Thu, Mar 17, 2016 at 10:55 AM, Adhi Priharmanto <adhi.pri at gmail.com<mailto:adhi.pri at gmail.com>> wrote:
Ok, 'll try to patched my neutron

On Tue, Mar 15, 2016 at 8:52 AM, Huan Xie <huan.xie at citrix.com<mailto:huan.xie at citrix.com>> wrote:
Hi,
For apply the patch, you need to download the changed file with this https://review.openstack.org/#/c/251271/ and its dependent changes, you can find its dependent changes in the right corner(Related Changes) in you open the link.
For files that you need edit, in the middle of the code review page, you can find a section called “Files”, this part shows you which files are changed.

Best Regards//Huan

From: Adhi Priharmanto [mailto:adhi.pri at gmail.com<mailto:adhi.pri at gmail.com>]
Sent: Monday, March 14, 2016 6:21 PM
To: Huan Xie
Cc: openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Subject: Re: [Openstack] Security Groups Can't Apply in Kilo with Neutron & XenServer

Hi Xie,

I also commented on your post at blog.citrix :) , for step 1 - 3 was clear for me. I still confused about patched code in https://review.openstack.org/#/c/251271/ for some file, could you more explain how to, which file that I should edit ?

Thanks before

On Mon, Mar 14, 2016 at 3:34 PM, Huan Xie <huan.xie at citrix.com<mailto:huan.xie at citrix.com>> wrote:
Hi Adhi,

Do you use devstack to deploy XenServer + Kilo or manually?
Current Kilo release does not support XenServer + Neutron security group, because security group is implemented via iptables on Linux bridge, however, there is no Linux bridge created when booting a new instance.
But we now have a new fix to support neutron security group, we have tested that it can work, this will be implemented as a blue print https://review.openstack.org/#/c/251271/
So, if you want to use neutron security group in Kilo, you should add some patch for your code and also please make the configurations as below:


1.       In nova.conf, two configurations should be set
[DEFAULT]
firewall_driver = nova.virt.firewall.NoopFirewallDriver

security_group_api=neutron


[xenserver]
ovs_integration_bridge =
vif_driver = nova.virt.xenapi.vif.XenAPIOpenVswitchDriver

                If you don’t know how to configure ovs_integration_bridge, then you can refer this blog https://www.citrix.com/blogs/2015/11/30/integrating-xenserver-rdo-and-neutron/


2.       In neutron,  check configurations ml2_conf.ini in compute node which is used for neutron L2 agent

[agent]

minimize_polling = False

root_helper_daemon =

root_helper = /usr/local/bin/neutron-rootwrap-xen-dom0 /etc/neutron/rootwrap.conf



[ovs]

integration_bridge =

bridge_mappings =

                Also for ovs configuration items, if you don’t clear on how to configure them, refer the blog


3.       In neutron, check configurations /etc/neutron/rootwrap.conf in compute node

[xenapi]

# XenAPI configuration is only required by the L2 agent if it is to

# target a XenServer/XCP compute host's dom0.

xenapi_connection_url=

xenapi_connection_username=

xenapi_connection_password=


Best Regards//Huan


-------- Original Message --------
Subject: [Openstack] Security Groups Can't Apply in Kilo with Neutron & XenServer
From: Adhi Priharmanto
To: openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
CC:
Hi all,

I had Openstack Kilo installed on my lab, for Compute Hypervisor I use XenServer 6.5, and networking Using Neutron OVS. For Controller, Network, and Compute node I'm using Ubuntu 14.04.

My problem was Security Groups rules doesn't applied to the instance that created. For example, there is no rule for SSH port 22 in security group i defined to the instance, but instance with floating IP able to login by ssh from external network.

I've already add this option on my nova.conf

firewall_driver=nova.virt.xenapi.firewall.Dom0IptablesFirewallDriver

and also defined firewall_driver on my ml2_conf.ini at Controller, Network, and Compute node

[ovs]
enable_security_group = True
enable_ipset = True
firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver

can somebody help me with this problem ?


--
Cheers,


Adhi Priharmanto
about.me/a_dhi<http://about.me/a_dhi>









_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to     : openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack



--
Cheers,


Adhi Priharmanto
about.me/a_dhi<http://about.me/a_dhi>






+62-812-82121584<tel:%2B62-812-82121584>




--
Cheers,


Adhi Priharmanto
about.me/a_dhi











--
Cheers,


Adhi Priharmanto
about.me/a_dhi






+62-812-82121584

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160918/68b4e8f9/attachment.html>