Open Stack

No I still have that error. Other than that I don't see any other errors.

On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <eblock at nde.ag> wrote:

> So I guess the mentioned error should be resolved? Does it work now?
>
>
>
> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>
> Yes I I have it set up in nova.conf and neutron.conf
>>
>> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <eblock at nde.ag> wrote:
>>
>> And did you change it to auth_type instead of auth_plugin? Also you should
>>> make sure that this option is in the correct section of your config file,
>>> for example
>>>
>>> [keystone_authtoken]
>>> ...
>>> auth_type = password
>>>
>>> or
>>>
>>> [neutron]
>>> ...
>>> auth_type = password
>>>
>>>
>>> Regards,
>>> Eugen
>>>
>>>
>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>
>>> Hi Eugen,
>>>
>>>>
>>>> Thanks. Log says its an error. Here is the full log.
>>>> http://pastebin.com/K1f4pJhB
>>>>
>>>> -Paras.
>>>>
>>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <eblock at nde.ag> wrote:
>>>>
>>>> Hi Paras,
>>>>
>>>>>
>>>>> the option auth_plugin is deprecated (from nova.conf):
>>>>>
>>>>> ---cut here---
>>>>> # Authentication type to load (unknown value)
>>>>> # Deprecated group/name - [DEFAULT]/auth_plugin
>>>>> auth_type = password
>>>>> ---cut here---
>>>>>
>>>>> But as far as I can tell, you should only get a warning, not an error,
>>>>> I've seen some of these warnings in my logs, but it works (I work with
>>>>> openSUSE). To get Mitaka working at all I simply tried to set the same
>>>>> options as in my working Liberty configs, and then I searched for
>>>>> deprecation warnings and additional options mentioned in the Mitaka
>>>>> guide.
>>>>>
>>>>> Hope this helps!
>>>>>
>>>>> Regards,
>>>>> Eugen
>>>>>
>>>>>
>>>>> Zitat von Paras pradhan <pradhanparas at gmail.com>:
>>>>>
>>>>>
>>>>> Can somebody share the nova.conf and neutron.conf from working mitaka?
>>>>> I
>>>>> am
>>>>>
>>>>> also following the same guide and ran into a problem.
>>>>>>
>>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions
>>>>>> NoSuchOptError: no such option in group neutron: auth_plugin
>>>>>>
>>>>>> Not sure what did I do wrong. It was while launching an instance.
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Paras.
>>>>>>
>>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <
>>>>>> nasir.mahmood at gmail.com
>>>>>> >
>>>>>> wrote:
>>>>>>
>>>>>> Martinx,
>>>>>>
>>>>>>
>>>>>>> glad to see that you are able to dig into the typo issue. I
>>>>>>> remember, I
>>>>>>> had to completely re-re-clean install my virtual setup of OpenStack
>>>>>>> for a
>>>>>>> POC back in 2015 , just because I have had miss-configured my
>>>>>>> neutron.conf's mysql DB connector information.
>>>>>>>
>>>>>>> Cheers!
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>> Nasir Mahmood
>>>>>>>
>>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ <
>>>>>>> thiagocmartinsc at gmail.com> wrote:
>>>>>>>
>>>>>>> FIXED!! I knew it was a typo somewhere!   LOL
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02
>>>>>>>>
>>>>>>>> Thank you guys!
>>>>>>>>
>>>>>>>> Sorry about the buzz on TWO mail lists...
>>>>>>>>
>>>>>>>> At least, now we know that Nova silent fail on its start up, if
>>>>>>>> somethings aren't configured according... And there is no
>>>>>>>> verification
>>>>>>>> steps to test the communication between Nova and Neutron.
>>>>>>>>
>>>>>>>>  Mitaka is working now on Xenial! YAY!!
>>>>>>>>
>>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and
>>>>>>>> multi-node deployments, fully automated!
>>>>>>>>
>>>>>>>> Cheers!
>>>>>>>> Thiago
>>>>>>>>
>>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <
>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>> >
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <
>>>>>>>> thiagocmartinsc at gmail.com
>>>>>>>> >
>>>>>>>>
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Guys,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>  I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using
>>>>>>>>>> the
>>>>>>>>>> following document:
>>>>>>>>>>
>>>>>>>>>>  http://docs.openstack.org/mitaka/install-guide-ubuntu
>>>>>>>>>>
>>>>>>>>>>  Yes, I know, the above document is for installing Mitaka on top
>>>>>>>>>> of
>>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is
>>>>>>>>>> that
>>>>>>>>>> on
>>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive,
>>>>>>>>>> since
>>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that document,
>>>>>>>>>> right?
>>>>>>>>>>  =)
>>>>>>>>>>
>>>>>>>>>>  At first, OpenStack installation goes okay, without any errors,
>>>>>>>>>> all
>>>>>>>>>> services comes up, etc... However, it is not possible to launch an
>>>>>>>>>> Instance.
>>>>>>>>>>
>>>>>>>>>>  *** Errors on launching the Instance:
>>>>>>>>>>
>>>>>>>>>>  - Right after launching it:
>>>>>>>>>>
>>>>>>>>>>  https://paste.ubuntu.com/15902503/
>>>>>>>>>>
>>>>>>>>>>  - Spawning it, after Glance finishes the download, similar error
>>>>>>>>>> a
>>>>>>>>>> second time:
>>>>>>>>>>
>>>>>>>>>>  https://paste.ubuntu.com/15902556/
>>>>>>>>>>
>>>>>>>>>>  What am I missing?
>>>>>>>>>>
>>>>>>>>>>  Apparently, Nova is not authorized to talk with Neutron but, I am
>>>>>>>>>> following the docs (maybe it is just a typo somewhere?)...
>>>>>>>>>>
>>>>>>>>>>  Also, I have an Ansible automation to deploy it, so, it is less
>>>>>>>>>> error
>>>>>>>>>> prone. And however can help me, will see how I am deploying it.
>>>>>>>>>>
>>>>>>>>>>  I see no error on Admin Dashboard, all services are up.
>>>>>>>>>>
>>>>>>>>>>  NOTE: My Ansible playbooks is in a sense, "
>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated",
>>>>>>>>>> it
>>>>>>>>>> is
>>>>>>>>>> very close to it, step-by-step.
>>>>>>>>>>
>>>>>>>>>>  How can I debug this? I mean, how can I try to do, what Nova is
>>>>>>>>>> doing
>>>>>>>>>> (its connection with Neutron), to make sure that the settings are
>>>>>>>>>> in
>>>>>>>>>> place
>>>>>>>>>> correctly?
>>>>>>>>>>
>>>>>>>>>>  Here is how I am installing Mitaka on Xenial:
>>>>>>>>>>
>>>>>>>>>> ---
>>>>>>>>>>  1- Install Ubuntu 16.04 server 64-bit on bare-metal;
>>>>>>>>>>
>>>>>>>>>>    * Configure your /etc/hostname and /etc/hosts.
>>>>>>>>>>
>>>>>>>>>>    DETAILS:
>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  2- Clone the automation:
>>>>>>>>>>
>>>>>>>>>>     cd ~
>>>>>>>>>>     git clone https://github.com/tmartinx/svauto.git
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  3- Run the automation to install OpenStack (all-in-one)
>>>>>>>>>>
>>>>>>>>>>     cd ~/svauto
>>>>>>>>>>
>>>>>>>>>>    ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16
>>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka
>>>>>>>>>> --openstack-installation
>>>>>>>>>> --dry-run
>>>>>>>>>>
>>>>>>>>>>    ansible-playbook -c local site-openstack.yml --extra-vars
>>>>>>>>>> "openstack_installation=yes"
>>>>>>>>>> ---
>>>>>>>>>>
>>>>>>>>>>  NOTE: If you don't use "--dry-run" option, Ansible will be
>>>>>>>>>> executed
>>>>>>>>>> automatically by "os-deploy.sh".
>>>>>>>>>>
>>>>>>>>>>  I am sharing the Ansible playbooks, because it will be easier to
>>>>>>>>>> see
>>>>>>>>>> what I am doing.
>>>>>>>>>>
>>>>>>>>>>  About the relevant configuration blocks, I believe that I have it
>>>>>>>>>> properly configured (I followed Mitaka docs), like this:
>>>>>>>>>>
>>>>>>>>>>  * neutron.conf:
>>>>>>>>>> -
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf
>>>>>>>>>> -
>>>>>>>>>>
>>>>>>>>>>  * nova.conf:
>>>>>>>>>> -
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf
>>>>>>>>>> -
>>>>>>>>>>
>>>>>>>>>>  I already installed OpenStack many, many, many times, since
>>>>>>>>>> Havana
>>>>>>>>>> release, I'm confident that I am doing it right but, of course,
>>>>>>>>>> maybe
>>>>>>>>>> I did
>>>>>>>>>> something wrong this time...   =P
>>>>>>>>>>
>>>>>>>>>>  I appreciate any help!
>>>>>>>>>>
>>>>>>>>>> Thanks!
>>>>>>>>>> Thiago
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hey guys,
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  I am reviewing everything, to make sure that my automation matches
>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details.
>>>>>>>>>
>>>>>>>>>  Two things...
>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>>  1- All the verification steps (from official doc) passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html
>>>>>>>>> - passed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html
>>>>>>>>> - passed (mine doesn't have /horizon)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html
>>>>>>>>> - passed but, I'm not using any cinder-volume yet
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html
>>>>>>>>> - "6. Launch the instance" - FAIL
>>>>>>>>>
>>>>>>>>>   NOTE: I can create Networks, Subnets, Routers... I can see the
>>>>>>>>> Linux
>>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  2- This problem happen no matter if deploying it with Linux
>>>>>>>>> Bridges
>>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS)
>>>>>>>>> ---
>>>>>>>>>
>>>>>>>>>  So, I think that OpenStack should provide more verification steps,
>>>>>>>>> specially to test the communication / authentication between its
>>>>>>>>> different
>>>>>>>>> projects, for example:
>>>>>>>>>
>>>>>>>>>  A- Does Nova can communicate with Neutron? How to test this?
>>>>>>>>>
>>>>>>>>>  B- Can Nova download images from Glance? Etc...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  Doing more reviews now...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Cheers!
>>>>>>>>> Thiago
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>> Mailing list:
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>>> Unsubscribe :
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>> Nasir Mahmood
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list:
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>> Post to     : openstack at lists.openstack.org
>>>>>>> Unsubscribe :
>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> --
>>>>> Eugen Block                             voice   : +49-40-559 51 75
>>>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>>>> Postfach 61 03 15
>>>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>>>
>>>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>>>                   Vorstand: Jens-U. Mozdzen
>>>>>                    USt-IdNr. DE 814 013 983
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list:
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>> Post to     : openstack at lists.openstack.org
>>>>> Unsubscribe :
>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>
>>>>>
>>>>>
>>>
>>> --
>>> Eugen Block                             voice   : +49-40-559 51 75
>>> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
>>> Postfach 61 03 15
>>> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>>>
>>>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>>>           Sitz und Registergericht: Hamburg, HRB 90934
>>>                   Vorstand: Jens-U. Mozdzen
>>>                    USt-IdNr. DE 814 013 983
>>>
>>>
>>>
>
>
> --
> Eugen Block                             voice   : +49-40-559 51 75
> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
> Postfach 61 03 15
> D-22423 Hamburg                         e-mail  : eblock at nde.ag
>
>         Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>           Sitz und Registergericht: Hamburg, HRB 90934
>                   Vorstand: Jens-U. Mozdzen
>                    USt-IdNr. DE 814 013 983
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20160420/0d0fc041/attachment.html>