[Openstack] Openstack Digest, Vol 27, Issue 10
murali Srikanth
srikanth.as.avm at gmail.com
Fri Sep 11 15:15:07 UTC 2015
Hi Naveen,
Thanks for your quick response, Just now i check the firewall status on my
three nodes.
Please find the below details:
root at controller:~# sudo ufw status verbose
Status: inactive
root at network:~# sudo ufw status verbose
Status: inactive
root at compute:~# sudo ufw status verbose
Status: inactive
Thanks & regards,
Srikanth VM
9035719966
On Fri, Sep 11, 2015 at 7:06 PM, Naveen Yadav <naveen.yadav at aricent.com>
wrote:
>
>
> We are not able to ping openstack instance external Ip address.
>
> >> check your FW, you can try after disabling it.
>
>
>
>
>
> *From:* murali Srikanth [mailto:srikanth.as.avm at gmail.com]
> *Sent:* Friday, September 11, 2015 6:09 PM
> *To:* openstack at lists.openstack.org
> *Subject:* Re: [Openstack] Openstack Digest, Vol 27, Issue 10
>
>
>
> Hi,
>
> I need your assistance on this. We setup openstack 3-node architecture.
>
> OS: Ubuntu 14.04 LTS
>
> Controller Node 1 NIC
>
> Network Node 2 NIC's
>
> Compute Node 2 NIC's
>
> We followed (
> http://docs.openstack.org/kilo/install-guide/install/apt/content/ ) this
> link for openstack setup.
>
> We created router and tenant network as demo user
> We created external network as admin user.
>
> We blindly followed the above url and everything is working fine, except
> below mentioned things.
>
>
>
> Our Problem:
>
> We are not able to ping openstack router gate way IP address.
>
> We are not able to ping openstack instance external Ip address.
>
>
>
>
>
> Thanks in advance.
>
> Thanks & Regards,
>
> Srikanth VM
>
>
>
>
>
>
>
> On Fri, Sep 11, 2015 at 5:30 PM, <openstack-request at lists.openstack.org>
> wrote:
>
> Send Openstack mailing list submissions to
> openstack at lists.openstack.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> or, via email, send a message with subject or body 'help' to
> openstack-request at lists.openstack.org
>
> You can reach the person managing the list at
> openstack-owner at lists.openstack.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Openstack digest..."
>
>
> Today's Topics:
>
> 1. about network configuration (applyhhj)
> 2. Re: about network configuration (Nasir Mahmood)
> 3. Re: question about manila in relationship to nfs-ganesha and
> glusterfs (Ramana Raja)
> 4. help! (Heidi Bretz)
> 5. ??????? LinkedIn (??) ???????????????? (venkatesh kotipalli)
> 6. GBP(Group Based Policy) REST APIs (Shital Patil)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 10 Sep 2015 20:50:54 +0800
> From: "applyhhj"<applyhhj at 163.com>
> To: "openstack"<openstack at lists.openstack.org>
> Subject: [Openstack] about network configuration
> Message-ID: <24a2b2fb.5ffe.14fb74f132c.Coremail.applyhhj at 163.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Everyone,
> I am new to openstack. When following the Install Guidance(kilo
> version) for Ubuntu, I was unable to correctly configure the network. I
> followed the Guidance and set up 1 controller node, 1 network node and 3
> computing nodes. All configuration is almost the same as the Guidance.
> However, if I set the gateway of management interface in network node to
> 10.0.0.1 and change external interface to ?dhcp? mode, which is required by
> my external network environment, then I cannot ping other nodes from
> network nodes. So I comment the gateway configuration and everything works
> fine. But only network node can access to external network, other nodes are
> not able to ping outside website. It will throw ?unknown host? error. Can
> anyone help me with this problem please? Thank you very much!!
>
>
> 2015-09-10
>
>
>
> applyhhj
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.openstack.org/pipermail/openstack/attachments/20150910/21d09df9/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Thu, 10 Sep 2015 18:17:29 +0500
> From: Nasir Mahmood <nasir.mahmood at gmail.com>
> To: applyhhj <applyhhj at 163.com>
> Cc: openstack <openstack at lists.openstack.org>
> Subject: Re: [Openstack] about network configuration
> Message-ID:
> <
> CACnWpYN39vcMegx8t7gAfwYLyknUJZKPDpQBw303PYebNokjcw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> hi
>
> The gateway 10.0.0.1 is for only those hosts where you configure them
> within the physical network requiring outside access. In this case, where
> you wouldn't require any outside access to this private or management LAN
> of 10.0.x.x, I would recommend not to use any gateway at all ( only if you
> are connecting these interfaces using small network switch or a VLAN ).
>
> The other error that might be due to DNS issue. what you getting when you
> type 'nslookup yahoo.com or nslookup google.com'
>
> what are you routing entries on private and public LAN interfaces and have
> you configured them to be isolated from each other?
>
>
>
> On Thu, Sep 10, 2015 at 5:50 PM, applyhhj <applyhhj at 163.com> wrote:
>
> > Hi Everyone,
> >
> > I am new to openstack. When following the Install Guidance(kilo
> > version) for Ubuntu, I was unable to correctly configure the network. I
> > followed the Guidance and set up 1 controller node, 1 network node and 3
> > computing nodes. All configuration is almost the same as the Guidance.
> > However, if I set the gateway of management interface in network node to
> > 10.0.0.1 and change external interface to ?dhcp? mode, which is required
> by
> > my external network environment, then I cannot ping other nodes from
> > network nodes. So I comment the gateway configuration and everything
> works
> > fine. But only network node can access to external network, other nodes
> are
> > not able to ping outside website. It will throw ?unknown host? error. Can
> > anyone help me with this problem please? Thank you very much!!
> >
> >
> >
> >
> > 2015-09-10
> > ------------------------------
> > applyhhj
> >
> > _______________________________________________
> > Mailing list:
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
> >
>
>
> --
> Nasir Mahmood
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.openstack.org/pipermail/openstack/attachments/20150910/5229c1d2/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Thu, 10 Sep 2015 15:07:24 +0000 (UTC)
> From: Ramana Raja <rraja at redhat.com>
> To: openstack at lists.openstack.org
> Subject: Re: [Openstack] question about manila in relationship to
> nfs-ganesha and glusterfs
> Message-ID: <loom.20150910T165214-833 at post.gmane.org>
> Content-Type: text/plain; charset=utf-8
>
> Hi Andrea,
>
> > Andrea Y Ma <ayma at ...> writes:
>
> > I'm trying to use devstack with manila and nfs-ganesha with glusterfs as
> > the backend
> >
> > Environment: I have glusterfs installed on two bare metal systems and
> > devstack using kilo installed on another bare metal system.
> >
> > I'm a little confused about how I should be using ganesha nfs with
> > glusterfs as the backend.
> >
> > Should nfs-ganesha be installed in:
> > a) my glusterFS servers and update the manila.conf setting
> > glusterfs_nfs_server_type= Ganesha
> > b) my devstack
> > c) a service VM that I manually spawn?
>
> Very sorry about the late reply. We've been held up by our deliverables
> for the
> Liberty release. Thanks to your questions it's been easy for us to figure
> out
> the gaps in our documentation. We definitely plan to cover the misses for
> Liberty. For now, I've answered your questions below.
>
> The NFS-Ganesha server can be installed in a), b) or c). To use
> Ganesha-GlusterFS with Manila, Manila's share service needs root access to
> the
> Ganesha server and the GlusterFS server machines to perform privileged
> actions.
> This can be done by enabling password-less ssh root login for the manila
> service user to the Ganesha server and the GlusterFS server machines when
> both
> these servers run in machines remote to the manila service. And then,
> Manila
> config options need to be set to identify the Ganesha and GlusterFS
> servers.
>
> >
> > I see the following link:
> > http://docs.openstack.org/developer/manila/devref/ganesha.html
> > which points to there being ganesha support built into manila.
> > The only requirement is that I have nfs-ganesha 2.1 or later.
> > This would seem to imply that I should have nfs-ganesha installed
> > on my devstack instance where manila is running. However from the
> > values in the wiki I'm not sure how to point the nanila.conf file
> > to use those parameters. Should I just add them to the glusterfs
> > section I have or do I make a new ganesha section and update a
> > manila config setting?
>
> You can add the ganesha config options to the glusterfs section. Here's an
> example,
> ##
> ## glusterfs-ganesha section
> [glusterfs_ganesha1]
> share_driver = manila.share.drivers.glusterfs.GlusterfsShareDriver
> driver_handles_share_servers = False
> ## config option specifying the GlusterFS volume and GlusterFS server node
> glusterfs_target = root at 172.16.53.14:/manila-nfs-volume
> glusterfs_nfs_server_type = Ganesha
> ## Config option indicating the IP of the Ganesha server node
> ## Here Ganesha server and GlusterFS server are in the same machine.
> glusterfs_ganesha_server_ip = 172.16.53.14
> ganesha_service_name = nfs-ganesha
> share_backend_name = GLUSTERFS_GANESHA
> ## End of Config file
>
> It's not necessary for NFS-Ganesha to run in the GlusterFS server machine.
> It
> can run on a machine that can connect to the GlusterFS server, Manila host,
> and the Manila client's network. The manila-share service figures out
> Ganesha
> server's location using the "glusterfs_ganesha_server_ip" option. The
> glusterfs driver doc should've covered this option, but it does not. This
> needs
> to be sorted out.
>
> The ganesha library in Manila makes use of NFS-Ganesha's D-Bus service and
> Systemd/Upstart service file. Check whether they're available in the
> Ganesha
> server machine. A key yet easy-to-miss step to configure Ganesha for Manila
> is to create a ganesha export directory with an empty file 'INDEX.conf'
> within it.
> This file needs to be included by the Ganesha's config file, done by
> adding the
> following line to ganesha.conf,
> %include <ganesha_export_dir>/INDEX.conf
>
> The above step is covered in the ganesha doc.
>
> > In the glusterFS driver I saw a ganesha reference in this link:
> > http://docs.openstack.org/developer/manila/devref/glusterfs_driver.html
> > So this made me wonder if nfs-ganesha should be installed on the
> > baremetals running glusterfs. I don't see a client/server nfs-ganesha
> > rpm so was thinking I need to install nfs-ganesha on both the
> > devstack and the glusterfs servers. Please correct me if I am wrong.
> > The instructions I found for nfs-ganesha was the following:
> >
> http://blog.gluster.org/2014/09/glusterfs-and-nfs-ganesha-integration/
>
> The following two NFS-Ganesha rpms need to be installed, nfs-ganesha and
> nfs-ganesha-fsal-gluster(for nfs-ganesha v2.1)/nfs-ganesha-gluster(for
> nfs-ganesha v2.2)
> I'm afraid that the gluster blog you mention here is dated. I've requested
> the gluster community to update this doc.
>
> >
> >
> > I was also looking at this video:
> > https://www.youtube.com/watch?v=1zUSFzbhThM
> > #vBrownBag 2014 OpenStack Paris - Bill Owen, Csaba Henk ?
> > Supporting NFS Ganesha in Manila)
> > In the video it shows a slide titled "Improved Ganesha-Based
> > Drivers with Service VM". I'm wondering how the serviceVM got generated.
> > When I tried just with the glusterFsShareDriver I did not notice a
> service
> > VM get spawned. Perhaps I had an error in my setup for using the
> > glusterFSShareDriver so wanted to make sure. Or perhaps I need to do
> some
> >
> > combination of the generic and glusterFsShareDrivers because I did see
> > with
> > the generic driver a service VM getting spawned. Or am I supposed to
> > manually spawn a service VM and install nfs-ganesha on that newly
> > spawned service VM. If so how do I tell manila about it?
>
> The GlusterfsShaserDriver with Ganesha does not yet suppport handling of
> share
> servers. The behaviour that you observe is expected. And the topic of the
> slide
> in the Paris talk still remains a Blueprint that's yet to be implemented.
>
> >
> > Once I have it running then do I need to do something different for the
> > share protocol or is there a document on what the extra-specs should be?
>
> By default, Manila's DevStack plugin sets up manila.conf to allow NFS and
> CIFS
> to be used as share protocols. It also creates a default share type with
> the
> spec "driver_handles_share_servers" as True. "glusterfs" driver with
> Ganehsa
> does not handle share servers so you'd need to create a share type with the
> spec set as False. Here's how you can do it as an OpenStack admin,
> $ manila type-create gluster_ganesha false
>
> You can also add the following extra spec type,
> $ manila type-key gluster_ganesha set share_backend_name=GLUSTERFS_GANESHA
>
> And in the current master(Liberty in progress), not in Kilo, you'd need to
> add
> the following step,
> $ manila type-key gluster_ganesha set snapshot_support=False
>
> You can now create a share using glusterfs driver,
> $ manila create --share-type gluster_ganesha NFS 1
>
>
> Once you've created a share, you'd like to know about the bug,
> https://bugs.launchpad.net/manila/+bug/1493080
> that'd be fixed in Liberty. Not sure if the fix would be backported to
> Kilo.
>
> Thanks,
>
> Ramana
>
> ------------------------------
>
> Message: 4
> Date: Thu, 10 Sep 2015 11:38:01 -0700
> From: "Heidi Bretz" <heidi at openstack.org>
> To: <openstack at lists.openstack.org>
> Subject: [Openstack] help!
> Message-ID: <005b01d0ebf7$d3c2e8c0$7b48ba40$@openstack.org>
> Content-Type: text/plain; charset="us-ascii"
>
> Please unsubscribe me
>
> -----Original Message-----
> From: openstack-request at lists.openstack.org
> [mailto:openstack-request at lists.openstack.org]
> Sent: Wednesday, September 09, 2015 5:00 AM
> To: openstack at lists.openstack.org
> Subject: Openstack Digest, Vol 27, Issue 8
>
> Send Openstack mailing list submissions to
> openstack at lists.openstack.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> or, via email, send a message with subject or body 'help' to
> openstack-request at lists.openstack.org
>
> You can reach the person managing the list at
> openstack-owner at lists.openstack.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Openstack digest..."
>
>
> Today's Topics:
>
> 1. Console via NoVNC showing garbled screen for Windows XP guest
> (Silvano Cirujano Cuesta)
> 2. port-delete issue (Yngvi P?ll ?orfinnsson)
> 3. Re: Query regarding contribution for monitoring of Nova and
> Swift (John Dickinson)
> 4. Re: Query regarding contribution for monitoring of Nova and
> Swift (Erik McCormick)
> 5. Re: port-delete issue (Brian Haley)
> 6. Re: port-delete issue (Yngvi P?ll ?orfinnsson)
> 7. Re: port-delete issue (Yngvi P?ll ?orfinnsson)
> 8. Re: port-delete issue (Brian Haley)
> 9. Re: port-delete issue (Yngvi P?ll ?orfinnsson)
> 10. [OSSA 2015-018] Neutron firewall rules bypass through port
> update (CVE-2015-5240) (Tristan Cacqueray)
> 11. Devstack multinode setup integration with Opendaylight
> (saurabh suman)
> 12. Re: port-delete issue (Yngvi P?ll ?orfinnsson)
> 13. [openstack][swift]Got error when installing swift all in one.
> (hao wang)
> 14. Re: [openstack][swift]Got error when installing swift all in
> one. (Kota TSUYUZAKI)
> 15. Cannot Attach Volumes Via Horizon (Ludwig Tirazona)
> 16. Neutron with apache2 wsgi module don't ack rabbitMQ messages
> (Heiko Kr?mer)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 8 Sep 2015 17:25:14 +0200
> From: Silvano Cirujano Cuesta <silvano.cirujano-cuesta at siemens.com>
> To: openstack at lists.openstack.org
> Subject: [Openstack] Console via NoVNC showing garbled screen for
> Windows XP guest
> Message-ID: <55EEFDDA.4040505 at siemens.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Hi,
>
> We have a test installation of OpenStack where we can instantiate VMs via
> Horizon without problems.
>
> But when we try to view the graphical console of VMs hosting a WindowsXP
> installation we get the garbled screen that you can see in the screenshot.
>
> Did anybody observed something similar? I couldn't find anybody describing
> similar effects in the internet...
>
> The graphical console via virt-manager looks good, so the QEMU VNC server
> is
> working fine.
>
> The boot-up splash screen also looks good with Horizon, so the VNC
> web-client (right now NoVNC) works at least partially.
>
> Since other VNC clients work fine, I think it's an issue with the NoVNC
> client.
>
> Some information about our environment:
> - OpenStack version: Kilo
> - OpenStack nodes running as VMs in a server that is behind a gateway,
> therefore network latencies can be high
>
> Any help first to find out the origin of the issue and then to fix it will
> be appreciated!
>
> Regards,
> Silvano
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: novnc.png
> Type: image/png
> Size: 46222 bytes
> Desc: not available
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150908/79cc1aa
> 5/attachment-0001.png
> <http://lists.openstack.org/pipermail/openstack/attachments/20150908/79cc1aa5/attachment-0001.png>
> >
>
> ------------------------------
>
> Message: 2
> Date: Tue, 8 Sep 2015 16:01:11 +0000
> From: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>
> To: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
> Subject: [Openstack] port-delete issue
> Message-ID: <1397f802959543b18f1339ac11738929 at simi-mbx-04.siminn.is>
> Content-Type: text/plain; charset="iso-8859-1"
>
> HI
>
> I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ), because
> one port is still in use.
>
> root at opst-ctrl1-dev:/# neutron subnet-delete
> f505a109-07a7-420a-ae6b-aa5995126be7
> Unable to complete operation on subnet
> f505a109-07a7-420a-ae6b-aa5995126be7.
> One or more ports have an IP allocation from this subnet. (HTTP 409)
> (Request-ID: req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
>
> This is the port in use:
> root at opst-ctrl1-dev:/# neutron port-list | grep
> f505a109-07a7-420a-ae6b-aa5995126be7
> | 220f1ad2-10bb-4d17-8cc5-3ad4f86f0b00 | | fa:16:3e:15:20:59 |
> {"subnet_id": "f505a109-07a7-420a-ae6b-aa5995126be7", "ip_address":
> "157.157.8.114"} |
> root at opst-ctrl1-dev:/#
>
> But I can't delete the port
>
> root at opst-ctrl1-dev:/# neutron port-delete
> 220f1ad2-10bb-4d17-8cc5-3ad4f86f0b00
> Port 220f1ad2-10bb-4d17-8cc5-3ad4f86f0b00 has owner network:floatingip and
> therefore cannot be deleted directly via the port API. (HTTP 409)
> (Request-ID: req-4823d685-6dd2-4f31-aa8c-0c8b8aa624a0)
>
> There are no floating ip's left on the system (I've already deleted them)
>
> root at opst-ctrl1-dev:/# neutron floatingip-list
>
> thus the list is empty.
>
> Listing this up in the db shows nothing either:
>
> MariaDB [neutron]> select * from floatingips; Empty set (0.00 sec)
>
>
> Can anyone help on this matter, i.e. how can I delete the port ( and also
> the subnet) ?
>
> Best regards
> Yngvi
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150908/e6d5024
> b/attachment-0001.html
> <http://lists.openstack.org/pipermail/openstack/attachments/20150908/e6d5024b/attachment-0001.html>
> >
>
> ------------------------------
>
> Message: 3
> Date: Tue, 08 Sep 2015 09:26:18 -0700
> From: "John Dickinson" <me at not.mn>
> To: "pragya jain" <prag_2648 at yahoo.co.in>
> Cc: Aparna Datt <aparna.datt at gmail.com>, OpenStack Mailing List
> <openstack at lists.openstack.org>, Anita Goel <goel.anita at gmail.com>
> Subject: Re: [Openstack] Query regarding contribution for monitoring
> of Nova and Swift
> Message-ID: <BD31EA44-72B4-4510-B36A-5525C3CAE230 at not.mn>
> Content-Type: text/plain; charset="utf-8"
>
> I'm the Project Technical Lead for Swift, and I'd be happy to look over a
> summary of your work about monitoring Swift. Feel free to email me directly
> or find me in #openstack-swift on IRC (I'm notmyname).
>
> --John
>
>
>
>
> On 8 Sep 2015, at 3:20, pragya jain wrote:
>
> > ?Hello all
> > Me and my colleague, aparna are carrying out research in the area of
> > cloud computing under Department of CS, University f Delhi.? We would
> > like to contribute our research work regarding monitoring of Nova and
> > Swift. We would appreciate if we can find the appropriate link with
> > whom we can connect to know if our work is relevant for contribution.
> > -----RegardsPragya JainDepartment of Computer ScienceUniversity of
> > DelhiDelhi, India_______________________________________________
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: signature.asc
> Type: application/pgp-signature
> Size: 801 bytes
> Desc: OpenPGP digital signature
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150908/4fd06d1
> f/attachment-0001.pgp
> <http://lists.openstack.org/pipermail/openstack/attachments/20150908/4fd06d1f/attachment-0001.pgp>
> >
>
> ------------------------------
>
> Message: 4
> Date: Tue, 8 Sep 2015 12:42:33 -0400
> From: Erik McCormick <emccormick at cirrusseven.com>
> To: pragya jain <prag_2648 at yahoo.co.in>
> Cc: Aparna Datt <aparna.datt at gmail.com>, OpenStack Mailing List
> <openstack at lists.openstack.org>, Anita Goel <goel.anita at gmail.com>
> Subject: Re: [Openstack] Query regarding contribution for monitoring
> of Nova and Swift
> Message-ID:
> <
> CAHUi5cPO4q351bezn1XBwKXWg0rxnKL06JA6ci1utEvvECaceg at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Tue, Sep 8, 2015 at 6:20 AM, pragya jain <prag_2648 at yahoo.co.in> wrote:
> > Hello all
> >
> > Me and my colleague, aparna are carrying out research in the area of
> > cloud computing under Department of CS, University f Delhi. We would
> > like to contribute our research work regarding monitoring of Nova and
> > Swift. We would appreciate if we can find the appropriate link with
> > whom we can connect to know if our work is relevant for contribution.
>
> You may want to cross-post this to openstack-operators. There is a Tools &
> Monitoring working group to help define best practices and share tools and
> configurations. Here's a link to the WG wiki and some of the stuff they've
> been working on.
>
> https://wiki.openstack.org/wiki/Tools_and_Monitoring_WG
> https://wiki.openstack.org/wiki/Operations/Monitoring
> https://wiki.openstack.org/wiki/Operations/Tools
>
> > -----
> > Regards
> > Pragya Jain
> > Department of Computer Science
> > University of Delhi
> > Delhi, India
> >
> > _______________________________________________
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
> -Erik
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 8 Sep 2015 12:45:27 -0400
> From: Brian Haley <brian.haley at hp.com>
> To: openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <55EF10A7.5080607 at hp.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> >
> > I can?t delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> > because one port is still in use.
> >
> > root at opst-ctrl1-dev:/# neutron subnet-delete
> > f505a109-07a7-420a-ae6b-aa5995126be7
> >
> > Unable to complete operation on subnet
> > f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> > req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
>
> Do you have a router on the subnet? Try deleting it.
>
> -Brian
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 8 Sep 2015 17:08:16 +0000
> From: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>
> To: Brian Haley <brian.haley at hp.com>, "openstack at lists.openstack.org"
> <openstack at lists.openstack.org>
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <e10fa1372973473fbe8d8f6ff1282e7e at simi-mbx-04.siminn.is>
> Content-Type: text/plain; charset="iso-8859-1"
>
> HI
> I don't see a router attached :
>
> root at opst-ctrl1-dev:/# neutron subnet-show ext-subnet
> +-------------------+----------------------------------------------------+
> | Field | Value |
> +-------------------+----------------------------------------------------+
> | allocation_pools | {"start": "157.157.8.100", "end": "157.157.8.200"} |
> | cidr | 157.157.8.0/24 |
> | dns_nameservers | 212.30.200.199 |
> | | 212.30.200.200 |
> | enable_dhcp | True |
> | gateway_ip | 157.157.8.1 |
> | host_routes | |
> | id | f505a109-07a7-420a-ae6b-aa5995126be7 |
> | ip_version | 4 |
> | ipv6_address_mode | |
> | ipv6_ra_mode | |
> | name | ext-subnet |
> | network_id | 523721c5-ea5d-42a1-8920-8bc75010f273 |
> | tenant_id | 1dda2478e30d44dda0ca752c6047725d |
> +-------------------+----------------------------------------------------+
> root at opst-ctrl1-dev:/#
>
> best regards
> Yngvi
>
>
> -----Original Message-----
> From: Brian Haley [mailto:brian.haley at hp.com]
> Sent: 8. september 2015 16:45
> To: openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
>
> On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> >
> > I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> > because one port is still in use.
> >
> > root at opst-ctrl1-dev:/# neutron subnet-delete
> > f505a109-07a7-420a-ae6b-aa5995126be7
> >
> > Unable to complete operation on subnet
> > f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> > req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
>
> Do you have a router on the subnet? Try deleting it.
>
> -Brian
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 8 Sep 2015 17:17:04 +0000
> From: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>
> To: Brian Haley <brian.haley at hp.com>, "openstack at lists.openstack.org"
> <openstack at lists.openstack.org>
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <60bec238c4b042acadc1c57a5701194d at simi-mbx-04.siminn.is>
> Content-Type: text/plain; charset="iso-8859-1"
>
> HI
>
>
> I have cleared the gateway on all routers, but it did not help
>
> root at opst-ctrl1-dev:/# neutron router-list
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | id | name |
> external_gateway_info | distributed | ha |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | 164ad471-5ab0-4109-acf5-f88de1e4b5f3 | gw | null
> | False | False |
> | 2371ae6e-8a07-464c-9b3e-3d7d35e96a59 | gw | null
> | False | False |
> | 45ab4a9a-c7fc-4cf6-844c-6265b5620121 | gw | null
> | False | False |
> | 50d16aec-adaf-431d-9b42-f8aff78ea5b8 | gw1 | null
> | False | False |
> | 546456aa-a312-48d5-8a3b-6031b1dcb3a9 | OskarTestRouter | null
> | False | False |
> | 78feb17a-9a29-4ddb-9477-914850d8f5d2 | ElasticRouter | null
> | False | False |
> | 7a06a85c-826a-4f00-a62f-5ae8586ea1fb | adminTest | null
> | False | False |
> | 7ba38ec5-49d9-4fc8-b77f-ef8a38e79af3 | Safni?-router | null
> | False | False |
> | 9e367dd6-ab2c-4949-a5e4-4d8d2787d84b | gw | null
> | False | False |
> | f05c4cc8-724e-4731-bea3-6ef68d794137 | gw1 | null
> | False | False |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
>
> But it did not help.
>
> best regards
> Yngvi
>
> -----Original Message-----
> From: Brian Haley [mailto:brian.haley at hp.com]
> Sent: 8. september 2015 16:45
> To: openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
>
> On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> >
> > I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> > because one port is still in use.
> >
> > root at opst-ctrl1-dev:/# neutron subnet-delete
> > f505a109-07a7-420a-ae6b-aa5995126be7
> >
> > Unable to complete operation on subnet
> > f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> > req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
>
> Do you have a router on the subnet? Try deleting it.
>
> -Brian
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
>
> ------------------------------
>
> Message: 8
> Date: Tue, 8 Sep 2015 13:32:43 -0400
> From: Brian Haley <brian.haley at hp.com>
> To: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>,
> "openstack at lists.openstack.org" <openstack at lists.openstack.org>
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <55EF1BBB.2030807 at hp.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> My only other suggestion is to do a port-list with admin privs and look. I
> can't tell if you're doing that as root != admin necessarily.
>
> -Brian
>
> On 09/08/2015 01:08 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> > I don't see a router attached :
> >
> > root at opst-ctrl1-dev:/# neutron subnet-show ext-subnet
> >
> +-------------------+----------------------------------------------------+
> > | Field | Value
> |
> >
> +-------------------+----------------------------------------------------+
> > | allocation_pools | {"start": "157.157.8.100", "end": "157.157.8.200"}
> |
> > | cidr | 157.157.8.0/24
> |
> > | dns_nameservers | 212.30.200.199
> |
> > | | 212.30.200.200
> |
> > | enable_dhcp | True
> |
> > | gateway_ip | 157.157.8.1
> |
> > | host_routes |
> |
> > | id | f505a109-07a7-420a-ae6b-aa5995126be7
> |
> > | ip_version | 4
> |
> > | ipv6_address_mode |
> |
> > | ipv6_ra_mode |
> |
> > | name | ext-subnet
> |
> > | network_id | 523721c5-ea5d-42a1-8920-8bc75010f273
> |
> > | tenant_id | 1dda2478e30d44dda0ca752c6047725d
> |
> >
> +-------------------+----------------------------------------------------+
> > root at opst-ctrl1-dev:/#
> >
> > best regards
> > Yngvi
> >
> >
> > -----Original Message-----
> > From: Brian Haley [mailto:brian.haley at hp.com]
> > Sent: 8. september 2015 16:45
> > To: openstack at lists.openstack.org
> > Subject: Re: [Openstack] port-delete issue
> >
> > On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> >> HI
> >>
> >> I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> >> because one port is still in use.
> >>
> >> root at opst-ctrl1-dev:/# neutron subnet-delete
> >> f505a109-07a7-420a-ae6b-aa5995126be7
> >>
> >> Unable to complete operation on subnet
> >> f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> >> req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
> >
> > Do you have a router on the subnet? Try deleting it.
> >
> > -Brian
> >
> > _______________________________________________
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Tue, 8 Sep 2015 17:42:09 +0000
> From: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>
> To: Brian Haley <brian.haley at hp.com>, "openstack at lists.openstack.org"
> <openstack at lists.openstack.org>
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <d2b7f0b84a664e88b340d120d923bcd1 at simi-mbx-04.siminn.is>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Those are the routers in the system (admin sees this)
>
> root at opst-ctrl1-dev:/# neutron router-list
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | id | name |
> external_gateway_info | distributed | ha |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | 164ad471-5ab0-4109-acf5-f88de1e4b5f3 | gw | null
> | False | False |
> | 2371ae6e-8a07-464c-9b3e-3d7d35e96a59 | gw | null
> | False | False |
> | 45ab4a9a-c7fc-4cf6-844c-6265b5620121 | gw | null
> | False | False |
> | 50d16aec-adaf-431d-9b42-f8aff78ea5b8 | gw1 | null
> | False | False |
> | 546456aa-a312-48d5-8a3b-6031b1dcb3a9 | OskarTestRouter | null
> | False | False |
> | 78feb17a-9a29-4ddb-9477-914850d8f5d2 | ElasticRouter | null
> | False | False |
> | 7a06a85c-826a-4f00-a62f-5ae8586ea1fb | adminTest | null
> | False | False |
> | 7ba38ec5-49d9-4fc8-b77f-ef8a38e79af3 | Safni?-router | null
> | False | False |
> | 9e367dd6-ab2c-4949-a5e4-4d8d2787d84b | gw | null
> | False | False |
> | f05c4cc8-724e-4731-bea3-6ef68d794137 | gw1 | null
> | False | False |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> root at opst-ctrl1-dev:/#
>
>
> but the port does not show up, when I list ports for each router with:
>
> neutron router-port-list ROUTER-ID
>
>
> but it does show up in the general port-list , like
>
> root at opst-ctrl1-dev:/# neutron port-list | grep 157
> | 220f1ad2-10bb-4d17-8cc5-3ad4f86f0b00 | | fa:16:3e:15:20:59 |
> {"subnet_id": "f505a109-07a7-420a-ae6b-aa5995126be7", "ip_address":
> "157.157.8.114"} |
>
>
> Best regards
> Yngvi
>
> -----Original Message-----
> From: Brian Haley [mailto:brian.haley at hp.com]
> Sent: 8. september 2015 17:33
> To: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>;
> openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
>
> My only other suggestion is to do a port-list with admin privs and look. I
> can't tell if you're doing that as root != admin necessarily.
>
> -Brian
>
> On 09/08/2015 01:08 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> > I don't see a router attached :
> >
> > root at opst-ctrl1-dev:/# neutron subnet-show ext-subnet
> >
> +-------------------+----------------------------------------------------+
> > | Field | Value
> |
> >
> +-------------------+----------------------------------------------------+
> > | allocation_pools | {"start": "157.157.8.100", "end": "157.157.8.200"}
> |
> > | cidr | 157.157.8.0/24
> |
> > | dns_nameservers | 212.30.200.199
> |
> > | | 212.30.200.200
> |
> > | enable_dhcp | True
> |
> > | gateway_ip | 157.157.8.1
> |
> > | host_routes |
> |
> > | id | f505a109-07a7-420a-ae6b-aa5995126be7
> |
> > | ip_version | 4
> |
> > | ipv6_address_mode |
> |
> > | ipv6_ra_mode |
> |
> > | name | ext-subnet
> |
> > | network_id | 523721c5-ea5d-42a1-8920-8bc75010f273
> |
> > | tenant_id | 1dda2478e30d44dda0ca752c6047725d
> |
> >
> +-------------------+----------------------------------------------------+
> > root at opst-ctrl1-dev:/#
> >
> > best regards
> > Yngvi
> >
> >
> > -----Original Message-----
> > From: Brian Haley [mailto:brian.haley at hp.com]
> > Sent: 8. september 2015 16:45
> > To: openstack at lists.openstack.org
> > Subject: Re: [Openstack] port-delete issue
> >
> > On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> >> HI
> >>
> >> I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> >> because one port is still in use.
> >>
> >> root at opst-ctrl1-dev:/# neutron subnet-delete
> >> f505a109-07a7-420a-ae6b-aa5995126be7
> >>
> >> Unable to complete operation on subnet
> >> f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> >> req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
> >
> > Do you have a router on the subnet? Try deleting it.
> >
> > -Brian
> >
> > _______________________________________________
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
>
>
>
> ------------------------------
>
> Message: 10
> Date: Tue, 8 Sep 2015 23:42:38 +0000
> From: Tristan Cacqueray <tdecacqu at redhat.com>
> To: openstack-announce at lists.openstack.org,
> openstack at lists.openstack.org
> Subject: [Openstack] [OSSA 2015-018] Neutron firewall rules bypass
> through port update (CVE-2015-5240)
> Message-ID: <55EF726E.9040407 at redhat.com>
> Content-Type: text/plain; charset="utf-8"
>
> ================================================================
> OSSA-2015-018: Neutron firewall rules bypass through port update
> ================================================================
>
> :Date: September 08, 2015
> :CVE: CVE-2015-5240
>
>
> Affects
> ~~~~~~~
> - Neutron: versions through 2014.2.3 and
> 2015.1 versions through 2015.1.1
>
>
> Description
> ~~~~~~~~~~~
> Kevin Benton from Mirantis reported a vulnerability in Neutron. By changing
> the device owner of an instance's port right after it is created, an
> authenticated user may prevent application of firewall rules and so avoid
> IP
> anti-spoofing controls. All Neutron setups using the ML2 plugin or a plugin
> that relies on the security groups AMQP API are affected.
>
>
> Patches
> ~~~~~~~
> - https://review.openstack.org/221345 (Juno)
> - https://review.openstack.org/221344 (Kilo)
> - https://review.openstack.org/221342 (Liberty)
>
>
> Credits
> ~~~~~~~
> - Kevin Benton from Mirantis (CVE-2015-5240)
>
>
> References
> ~~~~~~~~~~
> - https://launchpad.net/bugs/1489111
> - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-5240
>
>
> Notes
> ~~~~~
> - This fix will be included in future 2014.2.4 (juno) and
> 2015.1.2 (kilo) releases.
>
> --
> Tristan Cacqueray
> OpenStack Vulnerability Management Team
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: signature.asc
> Type: application/pgp-signature
> Size: 473 bytes
> Desc: OpenPGP digital signature
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150908/de7365a
> 0/attachment-0001.pgp
> <http://lists.openstack.org/pipermail/openstack/attachments/20150908/de7365a0/attachment-0001.pgp>
> >
>
> ------------------------------
>
> Message: 11
> Date: Wed, 9 Sep 2015 12:09:04 +0530
> From: saurabh suman <90.suman at gmail.com>
> To: openstack at lists.openstack.org
> Subject: [Openstack] Devstack multinode setup integration with
> Opendaylight
> Message-ID:
> <
> CAHoSm6JfNKiFMvv_G3Z56iR9zLj8U6BscOnMZKqs5ZScdXNKmg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
>
> I have a working 2 node openstack setup through devstack. Controller +
> Compute + Opendaylight -> 192.168.10.1 and Compute -> 192.168.10.2
>
> I have br-int and br-tun on both compute and controller node with their
> manager set to ODL and each bridge is connected to controller, as evident
> from ODL GUI.
>
> *On controller node*:
>
> [image: Inline image 1]
>
>
> On Compute node
>
> [image: Inline image 1]
>
> I am able to create a network.But when I launch a cirros VM, in the logs I
> see, *udhcpc (v1.21.1) started Sending discover... Sending discover...
> Sending discover...*
>
> My DHCP server is running with IP 10.20.30.2 (IP allocated from network
> created) and corresponding tap device is attached to br-int. when I run
> ovs-ofctl dump-ports br-int , I do not see any traffic going to dhcp tap
> though tap device created for VM is sending packets.
>
> After few minutes "lease fail" message is displayed and IP is not allocated
> to VM.
>
> Can anyone help me out here.
>
>
> Regards,
>
> Saurav
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd
> 3/attachment-0001.html
> <http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd3/attachment-0001.html>
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Compute_OVS.JPG
> Type: image/jpeg
> Size: 54795 bytes
> Desc: not available
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd
> 3/attachment-0002.jpe
> <http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd3/attachment-0002.jpe>
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: controller_OVS.JPG
> Type: image/jpeg
> Size: 79960 bytes
> Desc: not available
> URL:
> <
> http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd
> 3/attachment-0003.jpe
> <http://lists.openstack.org/pipermail/openstack/attachments/20150909/eb80ffd3/attachment-0003.jpe>
> >
>
> ------------------------------
>
> Message: 12
> Date: Wed, 9 Sep 2015 09:24:24 +0000
> From: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>
> To: Brian Haley <brian.haley at hp.com>, "openstack at lists.openstack.org"
> <openstack at lists.openstack.org>
> Subject: Re: [Openstack] port-delete issue
> Message-ID: <9ca3e2f111064ecf8eccd3fcf1ef351e at simi-mbx-04.siminn.is>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi
> This is the solution ;-)
> https://ask.openstack.org/en/question/67752/unable-to-delete-port/
>
> best regards
> Yngvi
>
>
> -----Original Message-----
> From: Yngvi P?ll ?orfinnsson
> Sent: 8. september 2015 17:42
> To: Brian Haley <brian.haley at hp.com>; openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
>
> Those are the routers in the system (admin sees this)
>
> root at opst-ctrl1-dev:/# neutron router-list
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | id | name |
> external_gateway_info | distributed | ha |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> | 164ad471-5ab0-4109-acf5-f88de1e4b5f3 | gw | null
> | False | False |
> | 2371ae6e-8a07-464c-9b3e-3d7d35e96a59 | gw | null
> | False | False |
> | 45ab4a9a-c7fc-4cf6-844c-6265b5620121 | gw | null
> | False | False |
> | 50d16aec-adaf-431d-9b42-f8aff78ea5b8 | gw1 | null
> | False | False |
> | 546456aa-a312-48d5-8a3b-6031b1dcb3a9 | OskarTestRouter | null
> | False | False |
> | 78feb17a-9a29-4ddb-9477-914850d8f5d2 | ElasticRouter | null
> | False | False |
> | 7a06a85c-826a-4f00-a62f-5ae8586ea1fb | adminTest | null
> | False | False |
> | 7ba38ec5-49d9-4fc8-b77f-ef8a38e79af3 | Safni?-router | null
> | False | False |
> | 9e367dd6-ab2c-4949-a5e4-4d8d2787d84b | gw | null
> | False | False |
> | f05c4cc8-724e-4731-bea3-6ef68d794137 | gw1 | null
> | False | False |
>
> +--------------------------------------+-----------------+------------------
> -----+-------------+-------+
> root at opst-ctrl1-dev:/#
>
>
> but the port does not show up, when I list ports for each router with:
>
> neutron router-port-list ROUTER-ID
>
>
> but it does show up in the general port-list , like
>
> root at opst-ctrl1-dev:/# neutron port-list | grep 157
> | 220f1ad2-10bb-4d17-8cc5-3ad4f86f0b00 | | fa:16:3e:15:20:59 |
> {"subnet_id": "f505a109-07a7-420a-ae6b-aa5995126be7", "ip_address":
> "157.157.8.114"} |
>
>
> Best regards
> Yngvi
>
> -----Original Message-----
> From: Brian Haley [mailto:brian.haley at hp.com]
> Sent: 8. september 2015 17:33
> To: Yngvi P?ll ?orfinnsson <yngvith at siminn.is>;
> openstack at lists.openstack.org
> Subject: Re: [Openstack] port-delete issue
>
> My only other suggestion is to do a port-list with admin privs and look. I
> can't tell if you're doing that as root != admin necessarily.
>
> -Brian
>
> On 09/08/2015 01:08 PM, Yngvi P?ll ?orfinnsson wrote:
> > HI
> > I don't see a router attached :
> >
> > root at opst-ctrl1-dev:/# neutron subnet-show ext-subnet
> >
> +-------------------+----------------------------------------------------+
> > | Field | Value
> |
> >
> +-------------------+----------------------------------------------------+
> > | allocation_pools | {"start": "157.157.8.100", "end": "157.157.8.200"}
> |
> > | cidr | 157.157.8.0/24
> |
> > | dns_nameservers | 212.30.200.199
> |
> > | | 212.30.200.200
> |
> > | enable_dhcp | True
> |
> > | gateway_ip | 157.157.8.1
> |
> > | host_routes |
> |
> > | id | f505a109-07a7-420a-ae6b-aa5995126be7
> |
> > | ip_version | 4
> |
> > | ipv6_address_mode |
> |
> > | ipv6_ra_mode |
> |
> > | name | ext-subnet
> |
> > | network_id | 523721c5-ea5d-42a1-8920-8bc75010f273
> |
> > | tenant_id | 1dda2478e30d44dda0ca752c6047725d
> |
> >
> +-------------------+----------------------------------------------------+
> > root at opst-ctrl1-dev:/#
> >
> > best regards
> > Yngvi
> >
> >
> > -----Original Message-----
> > From: Brian Haley [mailto:brian.haley at hp.com]
> > Sent: 8. september 2015 16:45
> > To: openstack at lists.openstack.org
> > Subject: Re: [Openstack] port-delete issue
> >
> > On 09/08/2015 12:01 PM, Yngvi P?ll ?orfinnsson wrote:
> >> HI
> >>
> >> I can't delete a subnet (id f505a109-07a7-420a-ae6b-aa5995126be7 ),
> >> because one port is still in use.
> >>
> >> root at opst-ctrl1-dev:/# neutron subnet-delete
> >> f505a109-07a7-420a-ae6b-aa5995126be7
> >>
> >> Unable to complete operation on subnet
> >> f505a109-07a7-420a-ae6b-aa5995126be7. One or more ports have an IP
> allocation from this subnet. (HTTP 409) (Request-ID:
> >> req-fbd64f19-2888-4d87-8e60-bc2cc920cd12)
> >
> > Do you have a router on the subnet? Try deleting it.
> >
> > -Brian
> >
> > _______________________________________________
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack at lists.openstack.org
> > Unsubscribe :
> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
>
> ------------------------------
>
> Message: 13
> Date: Wed, 9 Sep 2015 17:26:59 +0800
> From: hao wang <sxmatch1986 at gmail.com>
> To: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
> Subject: [Openstack] [openstack][swift]Got error when installing swift
> all in one.
> Message-ID:
> <CAOEh+o0714WzHCM1YFkoKS=
> o2bjPGh6T7cDcvhoS+Lzn0PrUBA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hi, all
>
> I was installing swift all-in-one in my virtual machine, OS is ubuntu
> 14.04.
>
> But I got errors when I start the swift service by using "startmain"
> script:
>
> liberasurecode[2969]: liberasurecode_backend_open: dynamic linking error
> libJerasure.so: cannot open shared object file: No such file or directory
> Traceback (most recent call last):
> File "/usr/local/bin/swift-object-server", line 6, in <module>
> exec(compile(open(__file__).read(), __file__, 'exec'))
> File "/swift/bin/swift-object-server", line 19, in <module>
> from swift.common.wsgi import run_wsgi
> File "/swift/swift/common/wsgi.py", line 39, in <module>
> from swift.common.storage_policy import BindPortsCache
> File "/swift/swift/common/storage_policy.py", line 738, in <module>
> reload_storage_policies()
> File "/swift/swift/common/storage_policy.py", line 730, in
> reload_storage_policies
> _POLICIES = parse_storage_policies(policy_conf)
> File "/swift/swift/common/storage_policy.py", line 686, in
> parse_storage_policies
> policy = policy_cls.from_config(policy_index, config_options)
> File "/swift/swift/common/storage_policy.py", line 251, in from_config
> return cls(policy_index, **policy_options)
> File "/swift/swift/common/storage_policy.py", line 387, in __init__
> ec_type=self._ec_type)
> File "/usr/local/lib/python2.7/dist-packages/pyeclib/ec_iface.py",
> line 172, in __init__
> chksum_type=self.chksum_type)
> File "/usr/local/lib/python2.7/dist-packages/pyeclib/utils.py", line 73,
> in create_instance
> instance = object_class(*args, **kwargs)
> File "/usr/local/lib/python2.7/dist-packages/pyeclib/core.py", line 61,
> in
> __init__
> self.algsig_chksum)
> pyeclib.Error: Invalid arguments passed to liberasurecode_instance_create
>
>
> I'm sure the libjerasure2 has been installed. So is there a solution to
> fix
> this issue?
>
> Thanks.
> --
> Best Wishes For You!
>
>
>
> ------------------------------
>
> Message: 14
> Date: Wed, 09 Sep 2015 18:40:42 +0900
> From: Kota TSUYUZAKI <tsuyuzaki.kota at lab.ntt.co.jp>
> To: hao wang <sxmatch1986 at gmail.com>
> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
> Subject: Re: [Openstack] [openstack][swift]Got error when installing
> swift all in one.
> Message-ID: <55EFFE9A.7030002 at lab.ntt.co.jp>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi, Hao
>
> Did you already do the setting for where shared jerasure library located?
> The log message looks that Linux system doesn't have a seach path for that.
>
> Like:
> - Add /usr/local/lib path (if you installed libJerasure.so in another
> location, you should set the path here) into /etc/ld.so.conf
> - sudo ldconfig
>
> That helps Linux system to search shared object library.
> Details is described in here. [1]
>
> 1: https://bitbucket.org/kmgreen2/pyeclib
>
> Best
> Kota
>
> (2015/09/09 18:26), hao wang wrote:
> > Hi, all
> >
> > I was installing swift all-in-one in my virtual machine, OS is ubuntu
> 14.04.
> >
> > But I got errors when I start the swift service by using "startmain"
> script:
> >
> > liberasurecode[2969]: liberasurecode_backend_open: dynamic linking
> > error libJerasure.so: cannot open shared object file: No such file or
> > directory
> > Traceback (most recent call last):
> > File "/usr/local/bin/swift-object-server", line 6, in <module>
> > exec(compile(open(__file__).read(), __file__, 'exec'))
> > File "/swift/bin/swift-object-server", line 19, in <module>
> > from swift.common.wsgi import run_wsgi
> > File "/swift/swift/common/wsgi.py", line 39, in <module>
> > from swift.common.storage_policy import BindPortsCache
> > File "/swift/swift/common/storage_policy.py", line 738, in <module>
> > reload_storage_policies()
> > File "/swift/swift/common/storage_policy.py", line 730, in
> > reload_storage_policies
> > _POLICIES = parse_storage_policies(policy_conf)
> > File "/swift/swift/common/storage_policy.py", line 686, in
> > parse_storage_policies
> > policy = policy_cls.from_config(policy_index, config_options)
> > File "/swift/swift/common/storage_policy.py", line 251, in from_config
> > return cls(policy_index, **policy_options)
> > File "/swift/swift/common/storage_policy.py", line 387, in __init__
> > ec_type=self._ec_type)
> > File "/usr/local/lib/python2.7/dist-packages/pyeclib/ec_iface.py",
> > line 172, in __init__
> > chksum_type=self.chksum_type)
> > File "/usr/local/lib/python2.7/dist-packages/pyeclib/utils.py", line
> > 73, in create_instance
> > instance = object_class(*args, **kwargs)
> > File "/usr/local/lib/python2.7/dist-packages/pyeclib/core.py", line
> > 61, in __init__
> > self.algsig_chksum)
> > pyeclib.Error: Invalid arguments passed to liberasurecode_instance_create
> >
> >
> > I'm sure the libjerasure2 has been installed. So is there a solution
> > to fix this issue?
> >
> > Thanks.
>
>
>
>
>
>
> ------------------------------
>
> Message: 15
> Date: Wed, 09 Sep 2015 18:24:31 +0800
> From: Ludwig Tirazona <ljtirazona at codebridge.com.ph>
> To: openstack at lists.openstack.org
> Subject: [Openstack] Cannot Attach Volumes Via Horizon
> Message-ID: <55F008DF.9040807 at codebridge.com.ph>
> Content-Type: text/plain; charset=utf-8
>
> Hello Everyone,
>
> I devstacked a deployment, just for PoC purposes. I have a problem
> wherein I can't attach volumes to instances via Horizon, but can do so
> via the nova CLI tool, so it seems that Cinder and Nova are set up
> properly. Right after attempting to attach a volume, Horizon gives me
> this error: "Error: Unable to attach volume."
>
> I took a look at the nova API logs, and I see this log:
>
> 2015-09-09 18:01:00.704 DEBUG nova.api.openstack.wsgi
> [req-8bde1423-b8cf-4a7f-a743-92c2a5a26ae4 admin admin] Returning 400 to
> user: Invalid input for field/attribute device. Value: . u'' does not
> match '(^/dev/x{0,1}[a-z]{0,1}d{0,1})([a-z]+)[0-9]*$' from (pid=25349)
> __call__ /opt/stack/nova/nova/api/openstack/wsgi.py:1175
>
>
> It looks like nova-api is looking for a "/dev/something" value for u,
> but Horizon only passes a blank value.
>
> The following link has the logs for Horizon.
> http://pastebin.com/DiwzW0tD
>
> What can I do to fix this? Inelegant solutions are very much welcome, I
> just want this to get working as soon as possible.
> Help would be greatly appreciated. Thanks!
>
>
>
> ------------------------------
>
> Message: 16
> Date: Wed, 9 Sep 2015 13:41:00 +0200
> From: Heiko Kr?mer <hkraemer at anynines.com>
> To: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
> Subject: [Openstack] Neutron with apache2 wsgi module don't ack
> rabbitMQ messages
> Message-ID: <55F01ACC.8060008 at anynines.com>
> Content-Type: text/plain; charset=utf-8
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi guys,
>
> another day, another problem :).
>
> * Icehouse
> * Apache2.4
> * Ubuntu 14.04
>
> I'm scaling our Neutron API endpoints to different servers to reach more
> throughput. In this case i decided to use apache2 with WSGI module to
> run the server in multi threaded mode to use optimal all CPU cores and
> handle more parallel requests.
>
> I create a vHost and a wsgi startup script file
>
> script:
>
> |from neutron.openstack.common import log as logging
> from neutron.common import config
>
> logging.setup('neutron')
> config.parse(['--config-file', '/etc/neutron/neutron.conf',
> '--config-file', '/etc/neutron/plugins/ml2/ml2_conf.ini'])
> application = config.load_paste_app("neutron")|
>
> vhost:
>
> |Listen *:9696
> <VirtualHost *:9696>
> WSGIScriptAlias / /var/www/cgi-bin/neutron
> WSGIDaemonProcess neutron-public user=neutron group=neutron
> processes=3 threads=10
> WSGIProcessGroup neutron-public
> WSGIApplicationGroup %{GLOBAL}
> WSGIPassAuthorization On
>
> LogLevel info
> ErrorLog /var/log/apache2/neutron-error.log
> CustomLog /var/log/apache2/neutron-access.log combined
> </VirtualHost>|
>
> So the server is running well, all requests are working well but i see
> on the messaging bus (rabbitmq) unack messages in two queues as far as
> the apache2 is running. The unack messages on both queues
> (n-lbaas-plugin & q-metering-plugin) is increasing over time. As soon as
> i switch to the build-IN webserver of Neutron all messages on both
> queues will ack and deliver.
>
> Is there any trick or is that a problem with multi thread ?
>
> Cheers and thanks
> Heiko
>
> - --
> anynines.com
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1
>
> iQEcBAEBAgAGBQJV8BrMAAoJELxFogM4ixOF8WIH/Aw+nXtaIAzZIyHn6XdvDQqf
> P2qDnGO460CtnKVYUBtLxxeTqOj0w2/g7A5ijvAXY97D0dSKmE08xwXFj1XA8zq9
> kTT5IKOf6M6OhXkYnNJWVWD+qNSseL8svRrUOhjVCu+PQBlm2k7EDRtyG3OySWQo
> M6RR9UvOUWZfnr8FJzA/p/K7Zha4POCoFjW3MxWJ9TC/Gv8+jhhO2HRBHz3H+OTE
> abq1CFv8f7/RwDJ1z05ZVoy7QolACLCd2mEAjaUmvAGp+iqy7gU/NRwNagDjExHw
> imwEO/DMYppz7//FUWCWQwNlu731sKIKBTx8DX2WeZz//rip0fi4vD8sys8NSsQ=
> =HQfo
> -----END PGP SIGNATURE-----
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Openstack mailing list
> openstack at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
> End of Openstack Digest, Vol 27, Issue 8
> ****************************************
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 11 Sep 2015 01:53:30 +0000 (UTC)
> From: venkatesh kotipalli <member at linkedin.com>
> To: ??? <openstack at lists.openstack.org>
> Subject: [Openstack] ??????? LinkedIn (??) ????????????????
> Message-ID:
> <1176099700.3442449.1441936410384.JavaMail.app at ltx1-app6310.prod>
> Content-Type: text/plain; charset="utf-8"
>
> ??????
> ?? LinkedIn (??) ?????????????????
>
> venkatesh kotipalli
> Cloud InfraStructure Engineer at Simplify DC
>
> ??:
> https://www.linkedin.com/e/v2?e=64uxg4-ieezpc9b-1u&a=invite-accept&midToken=AQH0SkAEnsMymg&tracking=eml-comm_invm-b-accept-newinvite&ek=invite_member_28&mboxId=I6047919489427738624_500&sharedKey=__ZQ1zvM&invitationId=6047919478241529856&fromReminder=false&fromEmail=true
>
> venkatesh kotipalli?????
> https://www.linkedin.com/e/v2?e=64uxg4-ieezpc9b-1u&t=npv&midToken=AQH0SkAEnsMymg&tracking=eml-comm_invm-b-name-newinvite&ek=invite_member_28&invitationAccept=370958548_I6047919489427738624_500&authType=name&authToken=v-W3&memberID=425289714
>
> ???????????????????????:
> https://www.linkedin.com/e/v2?e=64uxg4-ieezpc9b-1u&t=lun&midToken=AQH0SkAEnsMymg&tracking=eml-comm_invm-f-unsub-newinvite&ek=invite_member_28&loid=AQEJeA1XzKO39wAAAU-6G4bxCHGTPXbzZxNhkAji_V4R-1C7AIb9RRbnrA8j1uMu0BkHfwNolvg3rRrtRrIXDzmXiRl7&eid=64uxg4-ieezpc9b-1u
>
> ??????????? (???? - yocto????)? ????????????:
> https://www.linkedin.com/e/v2?e=64uxg4-ieezpc9b-1u&a=customerServiceUrl&midToken=AQH0SkAEnsMymg&ek=invite_member_28&articleId=4788
> ©
> <https://www.linkedin.com/e/v2?e=64uxg4-ieezpc9b-1u&a=customerServiceUrl&midToken=AQH0SkAEnsMymg&ek=invite_member_28&articleId=4788©>;
> 2015 LinkedIn Ireland Limited?LinkedIn?LinkedIn ???? InMail ?? LinkedIn
> Corporation ???????? (??) ?????????????
> LinkedIn ? LinkedIn Ireland Limited ???????
> ???????????????????: 477441
> ????: 70 Sir John Robersons Quay, Dublin 2?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.openstack.org/pipermail/openstack/attachments/20150911/24495d49/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 6
> Date: Fri, 11 Sep 2015 12:57:47 +0530
> From: Shital Patil <shital.patil at gslab.com>
> To: "<openstack at lists.openstack.org>" <openstack at lists.openstack.org>
> Cc: Sagar Pradhan <sagar.pradhan at gslab.com>
> Subject: [Openstack] GBP(Group Based Policy) REST APIs
> Message-ID:
> <CADdv+15bE9ptY5_NXcPyXEJA6wfrUq6v1UWVW+hhJS0v=
> CxOsQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello Guys,
>
> >From blueprint it looks likeGBP is currently using neutron REST and in
> next
> release plan is to write wrapper over it but I was interested to know *when
> will GBP have its own REST exposed so that it can be consumed by
> applications having **programmatic interaction with openstack ?*
>
> Thanks,
> Shital
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.openstack.org/pipermail/openstack/attachments/20150911/905a9596/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> Openstack mailing list
> openstack at lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
> End of Openstack Digest, Vol 27, Issue 10
> *****************************************
>
>
> "DISCLAIMER: This message is proprietary to Aricent and is intended solely
> for the use of the individual to whom it is addressed. It may contain
> privileged or confidential information and should not be circulated or used
> for any purpose other than for what it is intended. If you have received
> this message in error, please notify the originator immediately. If you are
> not the intended recipient, you are notified that you are strictly
> prohibited from using, copying, altering, or disclosing the contents of
> this message. Aricent accepts no responsibility for loss or damage arising
> from the use of the information transmitted by this email including damage
> from virus."
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150911/0b731898/attachment.html>
More information about the Openstack
mailing list
