Open Stack

Yes, should be on br-ex. 


Can you check your l3.conf file? One way would be to define br-ex as
external bridge there.

> external_network_bridge = br-ex

Then restart l3 service and see if it changes...


Andreas



On Mi, 2015-06-17 at 07:23 +0000, Mitchell Chen wrote:
> Hi All,
> 
>  
> 
> I setup the net, subnet and virtual router as the Kilo installation
> quid descried. Right after  “neutron router-gateway-set demo-router
> ext-net” command, I saw the qg port was created in the bridge br-int.
> Isn’t it supposed to be in the external bridge, br-ex?
> 
>  
> 
> root at stack:/home/stack# ovs-vsctl show
> 
> a7868820-c6a3-4670-b1b0-82bad350e264
> 
>     Bridge "br-eth1"
> 
>         Port "phy-br-eth1"
> 
>             Interface "phy-br-eth1"
> 
>                 type: patch
> 
>                 options: {peer="int-br-eth1"}
> 
>         Port "eth1"
> 
>             Interface "eth1"
> 
>         Port "br-eth1"
> 
>             Interface "br-eth1"
> 
>                 type: internal
> 
>     Bridge br-int
> 
>         fail_mode: secure
> 
>         Port "qr-a829657e-25"
> 
>             tag: 1
> 
>             Interface "qr-a829657e-25"
> 
>                 type: internal
> 
>         Port "tapa62ab986-9a"
> 
>             tag: 1
> 
>             Interface "tapa62ab986-9a"
> 
>                 type: internal
> 
>         Port "int-br-eth1"
> 
>             Interface "int-br-eth1"
> 
>                 type: patch
> 
>                 options: {peer="phy-br-eth1"}
> 
>         Port br-int
> 
>             Interface br-int
> 
>                 type: internal
> 
>         Port "qg-1846cc5e-55"
> 
>             Interface "qg-1846cc5e-55"
> 
>                 type: internal
> 
>     Bridge br-ex
> 
>         Port "eth2"
> 
>             Interface "eth2"
> 
>         Port br-ex
> 
>             Interface br-ex
> 
>                 type: internal
> 
>     ovs_version: "2.3.1"
> 
>  
> 
> Please advice.
> 
>  
> 
> Thanks,
> 
> Mitchell
> 
> 
> ************* Email Confidentiality Notice ********************
> The information contained in this e-mail message (including any 
> attachments) may be confidential, proprietary, privileged, or otherwise
> exempt from disclosure under applicable laws. It is intended to be 
> conveyed only to the designated recipient(s). Any use, dissemination, 
> distribution, printing, retaining or copying of this e-mail (including its 
> attachments) by unintended recipient(s) is strictly prohibited and may 
> be unlawful. If you are not an intended recipient of this e-mail, or believe 
> that you have received this e-mail in error, please notify the sender 
> immediately (by replying to this e-mail), delete any and all copies of 
> this e-mail (including any attachments) from your system, and do not
> disclose the content of this e-mail to any other person. Thank you!
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

-- 
Andreas
(IRC: scheuran)