[Openstack] [Juno] How to set the VxLAN UDP port number in Juno?
Erik McCormick
emccormick at cirrusseven.com
Tue Aug 11 13:02:58 UTC 2015
On Aug 11, 2015 8:48 AM, "Danny Choi (dannchoi)" <dannchoi at cisco.com> wrote:
>
> /etc/neutron/plugins/ml2/ml2_conf.ini does exist already.
>
> I added the following to it as Erik suggested and it did not work, port
8472 is still being used afterwards.
>
> [agent]
> vxlan_udp_port=4789
>
There should have been an agent section in there already. I included the
header for reference. Can you make sure you put it in the existing section?
> I’m using Linux Bridge, not OVS.
>
I don't think the option should behave differently with linuxbridge, but
I'm not sure. I'll have to take a look.
> From: Kevin Benton <blak111 at gmail.com>
> Date: Monday, August 10, 2015 at 4:20 PM
> To: Adam Lawson <alawson at aqorn.com>
> Cc: Danny Choi <dannchoi at cisco.com>, "
openstack-operators-request at lists.openstack.org" <
openstack-operators-request at lists.openstack.org>, "
openstack at lists.openstack.org" <openstack at lists.openstack.org>
>
> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in
Juno?
>
> +1. If the config file didn't exist, that means that wasn't the correct
file to edit.
>
> Run "ps -ef | grep agent" to find which files the openvswitch agent is
referencing for config and then make the changes to one of those. You
distro may be using something like /etc/neutron/plugin.ini.
>
> On Sun, Aug 9, 2015 at 8:18 PM, Adam Lawson <alawson at aqorn.com> wrote:
>>
>> Got a strange mailman message when i sent that out, sending again just
in case the parsing borked it.
>>
>>> You're saying you had to manually create the
"/etc/neutron/plugins/ml2/ml2_conf.ini" file? Pretty sure it's created
whenever Neutron is installed so I'd make sure Neutron installed correctly.
Don't mean to presume so check the obvious first right? ; )
>>
>>
>> /adam
>>
>>
>> Adam Lawson
>>
>> AQORN, Inc.
>> 427 North Tatnall Street
>> Ste. 58461
>> Wilmington, Delaware 19801-2230
>> Toll-free: (844) 4-AQORN-NOW ext. 101
>> International: +1 302-387-4660
>> Direct: +1 916-246-2072
>>
>>
>> On Sun, Aug 9, 2015 at 8:15 PM, Adam Lawson <alawson at aqorn.com> wrote:
>>>
>>> You're saying you had to manually create the
/etc/neutron/plugins/ml2/ml2_conf.ini file? Pretty sure it's created
whenever Neutron is installed so I'd make sure Neutron installed correctly.
Don't mean to presume so check the obvious first right? ; )
>>>
>>> /adam
>>>
>>>
>>> Adam Lawson
>>>
>>> AQORN, Inc.
>>> 427 North Tatnall Street
>>> Ste. 58461
>>> Wilmington, Delaware 19801-2230
>>> Toll-free: (844) 4-AQORN-NOW ext. 101
>>> International: +1 302-387-4660
>>> Direct: +1 916-246-2072
>>>
>>>
>>> On Sat, Aug 8, 2015 at 4:38 AM, Danny Choi (dannchoi) <
dannchoi at cisco.com> wrote:
>>>>
>>>> It shows port 8472 (otv) is still being used:
>>>>
>>>> [root at G10-QA4 ~]# netstat -a | grep udp
>>>>
>>>> udp 0 0 0.0.0.0:43320 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:58635 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:bootpc 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:ntp 0.0.0.0:*
>>>>
>>>> udp 0 0 localhost:323 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:sagxtsds 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:mdns 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:otv 0.0.0.0:*
>>>>
>>>> udp 0 0 0.0.0.0:memcache 0.0.0.0:*
>>>>
>>>> udp6 0 0 [::]:62175 [::]:*
>>>>
>>>> udp6 0 0 [::]:ntp [::]:*
>>>>
>>>> udp6 0 0 localhost:323 [::]:*
>>>>
>>>> [root at G10-QA4 ~]# ss -u -a
>>>>
>>>> State Recv-Q Send-Q
Local Address:Port
Peer Address:Port
>>>>
>>>> UNCONN 0 0
*:43320
*:*
>>>>
>>>> UNCONN 0 0
*:58635
*:*
>>>>
>>>> UNCONN 0 0
*:bootpc
*:*
>>>>
>>>> UNCONN 0 0
*:ntp
*:*
>>>>
>>>> UNCONN 0 0
127.0.0.1:rpki-rtr
*:*
>>>>
>>>> UNCONN 0 0
*:sagxtsds
*:*
>>>>
>>>> UNCONN 0 0
*:mdns
*:*
>>>>
>>>> UNCONN 0 0
*:otv
*:*
>>>>
>>>> UNCONN 0 0
*:memcache
*:*
>>>>
>>>> UNCONN 0 0
:::62175
:::*
>>>>
>>>> UNCONN 0 0
:::ntp
:::*
>>>>
>>>> UNCONN 0 0
::1:rpki-rtr
:::*
>>>>
>>>>
>>>>
>>>> From: Remo Mattei <Remo at Italy1.com>
>>>> Date: Friday, August 7, 2015 at 10:11 PM
>>>>
>>>> To: Danny Choi <dannchoi at cisco.com>
>>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
openstack-operators-request at lists.openstack.org" <
openstack-operators-request at lists.openstack.org>, "
openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number
in Juno?
>>>>
>>>> You need to call for udp adding a switch to the command. The ss alone
will not query look at the man page maybe -a works
>>>>
>>>> Inviato da iPhone
>>>>
>>>> Il giorno 07/ago/2015, alle ore 18:14, Danny Choi (dannchoi) <
dannchoi at cisco.com> ha scritto:
>>>>
>>>>> Don’t see anything using ss and netstat:
>>>>>
>>>>> [root at G10-QA4 ~(keystone_admin)]# ss | grep 4789
>>>>>
>>>>> [root at G10-QA4 ~(keystone_admin)]# netstat | grep 4789
>>>>>
>>>>> [root at G10-QA4 ~(keystone_admin)]#
>>>>>
>>>>>
>>>>> From: Remo Mattei <Remo at Italy1.com>
>>>>> Date: Friday, August 7, 2015 at 5:16 PM
>>>>> To: Danny Choi <dannchoi at cisco.com>
>>>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
openstack-operators-request at lists.openstack.org" <
openstack-operators-request at lists.openstack.org>, "
openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number
in Juno?
>>>>>
>>>>> Check using ss or netstat and see if the port is open.
>>>>>
>>>>> Remo
>>>>>
>>>>> Inviato da iPhone
>>>>>
>>>>> Il giorno 07/ago/2015, alle ore 13:44, Danny Choi (dannchoi) <
dannchoi at cisco.com> ha scritto:
>>>>>
>>>>>> Yes, I did restart the Neutron service.
>>>>>>
>>>>>> Danny
>>>>>>
>>>>>> From: Remo Mattei <Remo at Italy1.com>
>>>>>> Date: Friday, August 7, 2015 at 4:42 PM
>>>>>> To: Danny Choi <dannchoi at cisco.com>
>>>>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
openstack-operators-request at lists.openstack.org" <
openstack-operators-request at lists.openstack.org>, "
openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number
in Juno?
>>>>>>
>>>>>> Did you restart the services?
>>>>>>
>>>>>> Inviato da iPhone
>>>>>>
>>>>>> Il giorno 07/ago/2015, alle ore 13:16, Danny Choi (dannchoi) <
dannchoi at cisco.com> ha scritto:
>>>>>>
>>>>>>> Hi Erik,
>>>>>>>
>>>>>>> I added the following in ml2_config.ini file but it did not work;
still using port 8472 afterwards.
>>>>>>>
>>>>>>> [agent]
>>>>>>> vxlan_udp_port=4789
>>>>>>>
>>>>>>> Regards,
>>>>>>> Danny
>>>>>>>
>>>>>>> From: Erik McCormick <emccormick at cirrusseven.com>
>>>>>>> Date: Friday, August 7, 2015 at 9:57 AM
>>>>>>> To: Danny Choi <dannchoi at cisco.com>
>>>>>>> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>,
"openstack-operators-request at lists.openstack.org" <
openstack-operators-request at lists.openstack.org>, "Chow, Anthony T
(Anthony)** CTR **" <anthony.chow at alcatel-lucent.com>
>>>>>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port
number in Juno?
>>>>>>>
>>>>>>> Yes.
>>>>>>>
>>>>>>> On Aug 7, 2015 9:17 AM, "Danny Choi (dannchoi)" <dannchoi at cisco.com>
wrote:
>>>>>>>>
>>>>>>>> Hi Erik,
>>>>>>>>
>>>>>>>> Do you mean the ml2_config.ini file?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Danny
>>>>>>>>
>>>>>>>> On 8/6/15, 6:08 PM, "Erik McCormick" <emccormick at cirrusseven.com>
wrote:
>>>>>>>>
>>>>>>>> >in your ML2 config
>>>>>>>> >[agent]
>>>>>>>> >vxlan_udp_port=4789
>>>>>>>> >
>>>>>>>> >On Thu, Aug 6, 2015 at 5:46 PM, Chow, Anthony T (Anthony)** CTR **
>>>>>>>> ><anthony.chow at alcatel-lucent.com> wrote:
>>>>>>>> >> Danny,
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Are you using Open vSwitch for your VXLAN?
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Anthony.
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> From: Danny Choi (dannchoi) [mailto:dannchoi at cisco.com]
>>>>>>>> >> Sent: Thursday, August 06, 2015 5:56 AM
>>>>>>>> >> To: openstack at lists.openstack.org;
>>>>>>>> >> openstack-operators-request at lists.openstack.org
>>>>>>>> >> Subject: [Openstack] [Juno] How to set the VxLAN UDP port
number in
>>>>>>>> >>Juno?
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Hi,
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Linux default VxLAN UDP port is 8472.
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> How to change it to IANA assigned port 4789 in Juno?
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> Thanks,
>>>>>>>> >>
>>>>>>>> >> Danny
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> _______________________________________________
>>>>>>>> >> Mailing list:
>>>>>>>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>> >> Post to : openstack at lists.openstack.org
>>>>>>>> >> Unsubscribe :
>>>>>>>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>> >>
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>> Post to : openstack at lists.openstack.org
>>>>>>> Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> !DSPAM:1,55c51a10247869866410012!
>>>>>
>>>>> !DSPAM:1,55c5583e69231918657901!
>>>>
>>>>
>>>> _______________________________________________
>>>> Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>> Post to : openstack at lists.openstack.org
>>>> Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>
>>>
>>
>>
>> _______________________________________________
>> Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack at lists.openstack.org
>> Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>
>
>
> --
> Kevin Benton
>
> _______________________________________________
> Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150811/2497b010/attachment.html>
More information about the Openstack
mailing list