[Openstack] [Juno] How to set the VxLAN UDP port number in Juno?
Kevin Benton
blak111 at gmail.com
Mon Aug 10 20:20:19 UTC 2015
+1. If the config file didn't exist, that means that wasn't the correct
file to edit.
Run "ps -ef | grep agent" to find which files the openvswitch agent is
referencing for config and then make the changes to one of those. You
distro may be using something like /etc/neutron/plugin.ini.
On Sun, Aug 9, 2015 at 8:18 PM, Adam Lawson <alawson at aqorn.com> wrote:
> Got a strange mailman message when i sent that out, sending again just in
> case the parsing borked it.
>
> You're saying you had to manually create the "/etc/neutron/plugins/ml2/ml2_conf.ini"
>> file? Pretty sure it's created whenever Neutron is installed so I'd make
>> sure Neutron installed correctly. Don't mean to presume so check the
>> obvious first right? ; )
>
>
> /adam
>
>
> *Adam Lawson*
>
> AQORN, Inc.
> 427 North Tatnall Street
> Ste. 58461
> Wilmington, Delaware 19801-2230
> Toll-free: (844) 4-AQORN-NOW ext. 101
> International: +1 302-387-4660
> Direct: +1 916-246-2072
>
>
> On Sun, Aug 9, 2015 at 8:15 PM, Adam Lawson <alawson at aqorn.com> wrote:
>
>> You're saying you had to manually create the
>> /etc/neutron/plugins/ml2/ml2_conf.ini file? Pretty sure it's created
>> whenever Neutron is installed so I'd make sure Neutron installed correctly.
>> Don't mean to presume so check the obvious first right? ; )
>>
>> /adam
>>
>>
>> *Adam Lawson*
>>
>> AQORN, Inc.
>> 427 North Tatnall Street
>> Ste. 58461
>> Wilmington, Delaware 19801-2230
>> Toll-free: (844) 4-AQORN-NOW ext. 101
>> International: +1 302-387-4660
>> Direct: +1 916-246-2072
>>
>>
>> On Sat, Aug 8, 2015 at 4:38 AM, Danny Choi (dannchoi) <dannchoi at cisco.com
>> > wrote:
>>
>>> It shows port 8472 (otv) is still being used:
>>>
>>> [root at G10-QA4 ~]# netstat -a | grep udp
>>>
>>> *udp* 0 0 0.0.0.0:43320 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:58635 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:bootpc 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:ntp 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 localhost:323 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:sagxtsds 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:mdns 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:otv 0.0.0.0:*
>>>
>>>
>>> *udp* 0 0 0.0.0.0:memcache 0.0.0.0:*
>>>
>>>
>>> *udp*6 0 0 [::]:62175 [::]:*
>>>
>>>
>>> *udp*6 0 0 [::]:ntp [::]:*
>>>
>>>
>>> *udp*6 0 0 localhost:323 [::]:*
>>>
>>>
>>> [root at G10-QA4 ~]# ss -u -a
>>>
>>> State Recv-Q Send-Q
>>> Local Address:Port
>>> Peer Address:Port
>>>
>>> UNCONN 0 0
>>> *:43320
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:58635
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:bootpc
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:ntp
>>> *:*
>>>
>>> UNCONN 0 0
>>> 127.0.0.1:rpki-rtr
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:sagxtsds
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:mdns
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:otv
>>> *:*
>>>
>>> UNCONN 0 0
>>> *:memcache
>>> *:*
>>>
>>> UNCONN 0 0
>>> :::62175
>>> :::*
>>>
>>> UNCONN 0 0
>>> :::ntp
>>> :::*
>>>
>>> UNCONN 0 0
>>> ::1:rpki-rtr
>>> :::*
>>>
>>>
>>> From: Remo Mattei <Remo at Italy1.com>
>>> Date: Friday, August 7, 2015 at 10:11 PM
>>>
>>> To: Danny Choi <dannchoi at cisco.com>
>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
>>> openstack-operators-request at lists.openstack.org" <
>>> openstack-operators-request at lists.openstack.org>, "
>>> openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>> Juno?
>>>
>>> You need to call for udp adding a switch to the command. The ss alone
>>> will not query look at the man page maybe -a works
>>>
>>> Inviato da iPhone
>>>
>>> Il giorno 07/ago/2015, alle ore 18:14, Danny Choi (dannchoi) <
>>> dannchoi at cisco.com> ha scritto:
>>>
>>> Don’t see anything using ss and netstat:
>>>
>>> [root at G10-QA4 ~(keystone_admin)]# ss | grep 4789
>>>
>>> [root at G10-QA4 ~(keystone_admin)]# netstat | grep 4789
>>>
>>> [root at G10-QA4 ~(keystone_admin)]#
>>>
>>> From: Remo Mattei <Remo at Italy1.com>
>>> Date: Friday, August 7, 2015 at 5:16 PM
>>> To: Danny Choi <dannchoi at cisco.com>
>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
>>> openstack-operators-request at lists.openstack.org" <
>>> openstack-operators-request at lists.openstack.org>, "
>>> openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>> Juno?
>>>
>>> Check using ss or netstat and see if the port is open.
>>>
>>> Remo
>>>
>>> Inviato da iPhone
>>>
>>> Il giorno 07/ago/2015, alle ore 13:44, Danny Choi (dannchoi) <
>>> dannchoi at cisco.com> ha scritto:
>>>
>>> Yes, I did restart the Neutron service.
>>>
>>> Danny
>>>
>>> From: Remo Mattei <Remo at Italy1.com>
>>> Date: Friday, August 7, 2015 at 4:42 PM
>>> To: Danny Choi <dannchoi at cisco.com>
>>> Cc: Erik McCormick <emccormick at cirrusseven.com>, "
>>> openstack-operators-request at lists.openstack.org" <
>>> openstack-operators-request at lists.openstack.org>, "
>>> openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>> Juno?
>>>
>>> Did you restart the services?
>>>
>>> Inviato da iPhone
>>>
>>> Il giorno 07/ago/2015, alle ore 13:16, Danny Choi (dannchoi) <
>>> dannchoi at cisco.com> ha scritto:
>>>
>>> Hi Erik,
>>>
>>> I added the following in ml2_config.ini file but it did not work; still
>>> using port 8472 afterwards.
>>>
>>> [agent]
>>> vxlan_udp_port=4789
>>>
>>> Regards,
>>> Danny
>>>
>>> From: Erik McCormick <emccormick at cirrusseven.com>
>>> Date: Friday, August 7, 2015 at 9:57 AM
>>> To: Danny Choi <dannchoi at cisco.com>
>>> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>, "
>>> openstack-operators-request at lists.openstack.org" <
>>> openstack-operators-request at lists.openstack.org>, "Chow, Anthony T
>>> (Anthony)** CTR **" <anthony.chow at alcatel-lucent.com>
>>> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>> Juno?
>>>
>>> Yes.
>>> On Aug 7, 2015 9:17 AM, "Danny Choi (dannchoi)" <dannchoi at cisco.com>
>>> wrote:
>>>
>>>> Hi Erik,
>>>>
>>>> Do you mean the ml2_config.ini file?
>>>>
>>>> Thanks,
>>>> Danny
>>>>
>>>> On 8/6/15, 6:08 PM, "Erik McCormick" <emccormick at cirrusseven.com>
>>>> wrote:
>>>>
>>>> >in your ML2 config
>>>> >[agent]
>>>> >vxlan_udp_port=4789
>>>> >
>>>> >On Thu, Aug 6, 2015 at 5:46 PM, Chow, Anthony T (Anthony)** CTR **
>>>> ><anthony.chow at alcatel-lucent.com> wrote:
>>>> >> Danny,
>>>> >>
>>>> >>
>>>> >>
>>>> >> Are you using Open vSwitch for your VXLAN?
>>>> >>
>>>> >>
>>>> >>
>>>> >> Anthony.
>>>> >>
>>>> >>
>>>> >>
>>>> >> From: Danny Choi (dannchoi) [mailto:dannchoi at cisco.com]
>>>> >> Sent: Thursday, August 06, 2015 5:56 AM
>>>> >> To: openstack at lists.openstack.org;
>>>> >> openstack-operators-request at lists.openstack.org
>>>> >> Subject: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>>> >>Juno?
>>>> >>
>>>> >>
>>>> >>
>>>> >> Hi,
>>>> >>
>>>> >>
>>>> >>
>>>> >> Linux default VxLAN UDP port is 8472.
>>>> >>
>>>> >>
>>>> >>
>>>> >> How to change it to IANA assigned port 4789 in Juno?
>>>> >>
>>>> >>
>>>> >>
>>>> >> Thanks,
>>>> >>
>>>> >> Danny
>>>> >>
>>>> >>
>>>> >> _______________________________________________
>>>> >> Mailing list:
>>>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>> >> Post to : openstack at lists.openstack.org
>>>> >> Unsubscribe :
>>>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>> >>
>>>>
>>>> _______________________________________________
>>> Mailing list:
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> Post to : openstack at lists.openstack.org
>>> Unsubscribe :
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>
>>>
>>>
>>> !DSPAM:1,55c51a10247869866410012!
>>>
>>> !DSPAM:1,55c5583e69231918657901!
>>>
>>>
>>> _______________________________________________
>>> Mailing list:
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> Post to : openstack at lists.openstack.org
>>> Unsubscribe :
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>
>>>
>>
>
> _______________________________________________
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
--
Kevin Benton
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150810/5eb3e5af/attachment.html>
More information about the Openstack
mailing list