Open Stack

Don’t see anything using ss and netstat:


[root at G10-QA4 ~(keystone_admin)]# ss | grep 4789

[root at G10-QA4 ~(keystone_admin)]# netstat | grep 4789

[root at G10-QA4 ~(keystone_admin)]#

From: Remo Mattei <Remo at Italy1.com<mailto:Remo at Italy1.com>>
Date: Friday, August 7, 2015 at 5:16 PM
To: Danny Choi <dannchoi at cisco.com<mailto:dannchoi at cisco.com>>
Cc: Erik McCormick <emccormick at cirrusseven.com<mailto:emccormick at cirrusseven.com>>, "openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>" <openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>>, "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>
Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in Juno?

Check using ss or netstat and see if the port is open.

Remo

Inviato da iPhone

Il giorno 07/ago/2015, alle ore 13:44, Danny Choi (dannchoi) <dannchoi at cisco.com<mailto:dannchoi at cisco.com>> ha scritto:

Yes, I did restart the Neutron service.

Danny

From: Remo Mattei <Remo at Italy1.com<mailto:Remo at Italy1.com>>
Date: Friday, August 7, 2015 at 4:42 PM
To: Danny Choi <dannchoi at cisco.com<mailto:dannchoi at cisco.com>>
Cc: Erik McCormick <emccormick at cirrusseven.com<mailto:emccormick at cirrusseven.com>>, "openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>" <openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>>, "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>
Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in Juno?

Did you restart the services?

Inviato da iPhone

Il giorno 07/ago/2015, alle ore 13:16, Danny Choi (dannchoi) <dannchoi at cisco.com<mailto:dannchoi at cisco.com>> ha scritto:

Hi Erik,

I added the following in ml2_config.ini file but it did not work; still using port 8472 afterwards.

[agent]
vxlan_udp_port=4789

Regards,
Danny

From: Erik McCormick <emccormick at cirrusseven.com<mailto:emccormick at cirrusseven.com>>
Date: Friday, August 7, 2015 at 9:57 AM
To: Danny Choi <dannchoi at cisco.com<mailto:dannchoi at cisco.com>>
Cc: "openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>" <openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>>, "openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>" <openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>>, "Chow, Anthony T (Anthony)** CTR **" <anthony.chow at alcatel-lucent.com<mailto:anthony.chow at alcatel-lucent.com>>
Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in Juno?


Yes.

On Aug 7, 2015 9:17 AM, "Danny Choi (dannchoi)" <dannchoi at cisco.com<mailto:dannchoi at cisco.com>> wrote:
Hi Erik,

Do you mean the ml2_config.ini file?

Thanks,
Danny

On 8/6/15, 6:08 PM, "Erik McCormick" <emccormick at cirrusseven.com<mailto:emccormick at cirrusseven.com>> wrote:

>in your ML2 config
>[agent]
>vxlan_udp_port=4789
>
>On Thu, Aug 6, 2015 at 5:46 PM, Chow, Anthony T (Anthony)** CTR **
><anthony.chow at alcatel-lucent.com<mailto:anthony.chow at alcatel-lucent.com>> wrote:
>> Danny,
>>
>>
>>
>> Are you using Open vSwitch for your VXLAN?
>>
>>
>>
>> Anthony.
>>
>>
>>
>> From: Danny Choi (dannchoi) [mailto:dannchoi at cisco.com<mailto:dannchoi at cisco.com>]
>> Sent: Thursday, August 06, 2015 5:56 AM
>> To: openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>;
>> openstack-operators-request at lists.openstack.org<mailto:openstack-operators-request at lists.openstack.org>
>> Subject: [Openstack] [Juno] How to set the VxLAN UDP port number in
>>Juno?
>>
>>
>>
>> Hi,
>>
>>
>>
>> Linux default VxLAN UDP port is 8472.
>>
>>
>>
>> How to change it to IANA assigned port 4789 in Juno?
>>
>>
>>
>> Thanks,
>>
>> Danny
>>
>>
>> _______________________________________________
>> Mailing list:
>>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to     : openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
>> Unsubscribe :
>>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>

_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to     : openstack at lists.openstack.org<mailto:openstack at lists.openstack.org>
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack


!DSPAM:1,55c515ff239671643581755!
!DSPAM:1,55c51a10247869866410012!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20150808/8e4dc7b8/attachment.html>