[Openstack] Oz for CentOS image not work for key inject

Shake Chen shake.chen at gmail.com
Wed Jan 8 16:00:27 UTC 2014


Hi  Ritesh

Now I have test the ubuntu and fedora image , work well, so my Openstack
setting have no problem.

so the problem is the in my  image.






On Wed, Jan 8, 2014 at 6:02 PM, Ritesh Nanda <riteshnanda09 at gmail.com>wrote:

> Hello,
>
> You need to check your metadata service is running. In case of nuetron you
> need to enable nova metadata service and do some configuration to make it
> act as proxy.
>
> Check this out
>
> To allow virtual machines to access the Compute metadata information, the
> Networking metadata agent must be enabled and configured. The agent will
> act as a proxy for the Compute metadata service.
>
> On the controller, edit the /etc/nova/nova.conf file to define a secret
> key that will be shared between the Compute Service and the Networking
> metadata agent.
>
> Add to the [DEFAULT] section:
> [image: Select Text]
> 1
> 2
> 3
> [DEFAULT]
> neutron_metadata_proxy_shared_secret = METADATA_PASS
> service_neutron_metadata_proxy = true
>
> Restart the nova-api service:
>
> # service nova-api restart
>
> http://docs.openstack.org/havana/install-guide/install/apt/content/neutron-install.dedicated-network-node.html
>
> Regards,
> Ritesh
>
>
>
> On Wed, Jan 8, 2014 at 2:31 PM, Shake Chen <shake.chen at gmail.com> wrote:
>
>> Hi
>>
>> Now I use RDO deploy Openstack Havana, use GRE network.
>>
>> I use Ubuntu image, work well,
>>
>> but I according to the
>> http://docs.openstack.org/grizzly/openstack-image/content/ch_creating_images_automatically.html
>>
>> use Oz create centOS6.4 image, include cloud init.
>>
>> when create instance use the image, the log show
>>
>> Rebuilding /boot/initrd-2.6.32-431.3.1.el6.x86_64kdump.img
>> Starting kdump:[  OK  ]
>> Starting cloud-init: ci-info: lo    : 1 127.0.0.1       255.0.0.0       .
>> ci-info: eth0  : 1 10.10.10.4      255.255.255.0   fa:16:3e:50:bf:91
>> ci-info: route-0: 10.10.10.0      0.0.0.0         255.255.255.0   eth0   U
>> ci-info: route-1: 169.254.0.0     0.0.0.0         255.255.0.0     eth0   U
>> ci-info: route-2: 0.0.0.0         10.10.10.1      0.0.0.0         eth0   UG
>> cloud-init start running: Wed, 08 Jan 2014 07:44:22 +0000. up 24.15 seconds
>> 2014-01-08 02:44:25,861 - DataSourceEc2.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [3/120s]: url error [[Errno 113] No route to host]
>>
>>
>>
>> Now I can use root user login vm, check the router
>>
>> # route
>> Kernel IP routing table
>> Destination     Gateway         Genmask         Flags Metric Ref    Use
>> Iface
>> 10.10.10.0      *               255.255.255.0   U     0      0        0
>> eth0
>> link-local      *               255.255.0.0     U     1002   0        0
>> eth0
>> default         10.10.10.1      0.0.0.0         UG    0      0        0
>> eth0
>>
>> but I can not access 169.254.169.254
>>
>> # curl -f http://169.254.169.254/openstack
>> curl: (7) couldn't connect to host
>>
>> the image have installed cloud init.
>>
>> # rpm -qa | grep cloud-init
>> cloud-init-0.6.3-0.12.bzr532.el6.noarch
>>
>>
>>
>>
>>
>>
>>
>> --
>> Shake Chen
>>
>>
>> _______________________________________________
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to     : openstack at lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>
>
> --
>
>
> * With Regards  *
>
>
> * Ritesh Nanda*
>
>
>  <http://www.ericsson.com/>
>
>
>
>


-- 
Shake Chen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20140109/8d8cdfd7/attachment.html>


More information about the Openstack mailing list