Open Stack

Hi George,

It would be a pleasure to help you on this, do you still have problems 
with the deployment?
In OpenStack there are two types of networking that can be used 
a)nova-network and b)neutron.
Given your specified question i assume you are going with option a), 
then in that case the br100 bridge should be present (manually created - 
if you follow a manual deployment) on the controller node.
May be you can provide the link of the guide you are following so that 
we check if there is a need for correction on this.
One more thing, since you are using Centos you can consider using RedHat 
RDO ( http://openstack.redhat.com ) for the deployment.

Feel free to contact me with regard to any issues you have.
Best regards,
Thanassis

On 27/12/2013 8:12 μμ, Georgios Dimitrakakis wrote:
> Hi people!
>
> I am following the exact steps of the "Openstack Installation Guide" 
> for Havana on a CentOS 6.5
>
> The problem is that when I try create the network on the controller 
> node using this :
>
> nova --debug network-create vmnet --fixed-range-v4=x.x.x.x/32 
> --bridge-interface=br100 --multi-host=T
>
> I get an error that the br100 interface cannot be found.
>
> So, my question is the following: should this interface appear on the 
> controller node , on the compute node or on both nodes?
>
> What do I have to do to set it up properly since it doesn't appear on 
> any of them??
>
> I have found this bug for CentOS 6.4 and I am not sure that has been 
> corrected for 6.5.
>
>
> Could someone help me a bit with this??
>
>
> Best,
>
> G.
>
> _______________________________________________
> Mailing list: 
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack at lists.openstack.org
> Unsubscribe : 
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>