[Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
pragya jain
prag_2648 at yahoo.co.in
Wed Sep 11 05:48:07 UTC 2013
please help me in this regard.
>________________________________
> From: pragya jain <prag_2648 at yahoo.co.in>
>To: Clay Gerrard <clay.gerrard at gmail.com>
>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>Sent: Tuesday, 10 September 2013 11:25 PM
>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>
>
>
>thanks clay, for the help.
>
>
>I run some commands to survey what's on the system:
>
>
>root at arun-Aspire-5742:~# df
>Filesystem 1K-blocks Used Available Use% Mounted on
>/dev/sda4 177866264 4164648 164666508 3% /
>udev 2918600 4 2918596 1% /dev
>tmpfs 1170364 892 1169472 1% /run
>none 5120 4 5116 1% /run/lock
>none 2925908 216 2925692 1% /run/shm
>
>
>root at arun-Aspire-5742:~# cat /proc/mounts
>rootfs / rootfs rw 0 0
>sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
>proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
>udev /dev devtmpfs rw,relatime,size=2918600k,nr_inodes=198985,mode=755 0 0
>devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
>tmpfs /run tmpfs rw,nosuid,relatime,size=1170364k,mode=755 0 0
>/dev/disk/by-uuid/5259827c-cc52-43f4-bc2c-7aac2f927b02 / ext4 rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered 0 0
>none /sys/fs/fuse/connections fusectl rw,relatime 0 0
>none /sys/kernel/debug debugfs rw,relatime 0 0
>none /sys/kernel/security securityfs rw,relatime 0 0
>none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
>none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0
>gvfs-fuse-daemon /home/arun/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
>
>
>root at arun-Aspire-5742:~# ls /sys/block
>loop0 loop3 loop6 ram1 ram12 ram15 ram4 ram7 sda sr1
>loop1 loop4 loop7 ram10 ram13 ram2 ram5 ram8 sdb
>loop2 loop5 ram0 ram11 ram14 ram3 ram6 ram9 sr0
>
>
>root at arun-Aspire-5742:~# sudo blkid
>/dev/sda1: LABEL="System Reserved" UUID="12BA0286BA026717" TYPE="ntfs"
>/dev/sda2: UUID="D8EA06E4EA06BEAE" TYPE="ntfs"
>/dev/sda4: UUID="5259827c-cc52-43f4-bc2c-7aac2f927b02" TYPE="ext4"
>/dev/sda5: UUID="8AE41BA8E41B9613" TYPE="ntfs"
>/dev/sda6: UUID="3A14E4D814E497E1" TYPE="ntfs"
>/dev/sda7: UUID="a7c2ed39-1081-4702-9aed-a42b80a07cff" TYPE="swap"
>/dev/sr1: LABEL="20110729_053228" TYPE="iso9660"
>
>
>root at arun-Aspire-5742:~# sudo mkfs.xfs -L d1 /dev/sda2
>mkfs.xfs: /dev/sda2 appears to contain an existing filesystem (ntfs).
>mkfs.xfs: Use the -f option to force overwrite.
>
>
>which device should I label as "d1"?
>how many devices should I label as "d1", "d2" etc.?
>
>
>Please help me in this regard.
>
>
>
>>________________________________
>> From: Clay Gerrard <clay.gerrard at gmail.com>
>>To: pragya jain <prag_2648 at yahoo.co.in>
>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>Sent: Tuesday, 10 September 2013 12:01 AM
>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>
>>
>>
>>So it looks like you do not have a device '/dev/sdd' - which device do you want to use as "d1" - sda2, sda4, sda5, sda6, sda7 ???
>>
>>
>>
>>On Mon, Sep 9, 2013 at 9:47 AM, pragya jain <prag_2648 at yahoo.co.in> wrote:
>>
>>hello sir
>>>root at arun-Aspire-5742:~# cat /proc/partitions
>>>major minor #blocks name
>>>
>>>
>>> 8 0 488386584 sda
>>> 8 1 102400 sda1
>>> 8 2 102294528 sda2
>>> 8 3 1 sda3
>>> 8 4 180702208 sda4
>>> 8 5 102398278 sda5
>>> 8 6 102398278 sda6
>>> 8 7 487424 sda7
>>> 11 0 1048575 sr0
>>> 11 1 99328 sr1
>>>root at arun-Aspire-5742:~# sudo mkfs.xfs -L d1 /dev/sdb
>>>mkfs.xfs: cannot open /dev/sdb: No medium found
>>>
>>>
>>>pleases help me.
>>>
>>>
>>>
>>>
>>>
>>>>________________________________
>>>> From: Clay Gerrard <clay.gerrard at gmail.com>
>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>Sent: Saturday, 7 September 2013 9:50 PM
>>>>
>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>
>>>>
>>>>
>>>>ok, so it looks like no device with label d1 exists, so you can't mount it, and the account-server can't find it.
>>>>
>>>>
>>>>Devices get labeled when you put the file system on them (the `mkfs.xfs` command)
>>>>
>>>>
>>>>I saw in screenshot 10 you had mis-typed the mkfs.xfs command:
>>>>
>>>>
>>>>`sudo mkfs.xfs -f -i size=512 -L d3/dev/sdd`
>>>>
>>>>
>>>>That should be:
>>>>
>>>>
>>>>`sudo mkfs.xfs -f -i size=512 -L d3 /dev/sdd`
>>>>
>>>>
>>>>notice the space between the label "d3" and the device "/dev/sdd"
>>>>
>>>>
>>>>Also, fairly recently people have stopped recommending the larger inode size, so the commands should be:
>>>>
>>>>
>>>>`sudo mkfs.xfs -L d1 /dev/sdb`
>>>>`sudo mkfs.xfs -L d2 /dev/sdc`
>>>>
>>>>`sudo mkfs.xfs -L d3 /dev/sdd`
>>>>
>>>>
>>>>
>>>>and maybe:
>>>>
>>>>
>>>>`sudo mkfs.xfs -L d4 /dev/sde`
>>>>
>>>>
>>>>
>>>>... actually how many devices do you have in the system? Can I get a paste of the full output of `cat /proc/partitions`?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>On Fri, Sep 6, 2013 at 9:45 PM, pragya jain <prag_2648 at yahoo.co.in> wrote:
>>>>
>>>>hello sir,
>>>>>
>>>>>
>>>>>I did the following job:
>>>>>
>>>>>
>>>>>root at arun-Aspire-5742:~# sudo mount -t xfs -o noatime,nodiratime,logbufs=8 -L d1 /srv/node/d1
>>>>>
>>>>>mount: no such partition found
>>>>>root at arun-Aspire-5742:~# sudo mount -t xfs -o noatime,nodiratime,logbufs=8 -L d1 \srv/node/d1
>>>>>mount: no such partition found
>>>>>root at arun-Aspire-5742:~# cd /opt/swift/etc
>>>>>root at arun-Aspire-5742:/opt/swift/etc# sudo mount -t xfs -o noatime,nodiratime,logbufs=8 -L d1 /srv/node/d1
>>>>>mount: no such partition found
>>>>>root at arun-Aspire-5742:/opt/swift/etc# sudo mount -t xfs -o noatime,nodiratime,logbufs=8 -L d1 \srv/node/d1
>>>>>mount: no such partition found
>>>>>root at arun-Aspire-5742:/opt/swift/etc# cd ~
>>>>>root at arun-Aspire-5742:~# mount d1 /srv/node/d1
>>>>>mount: special device d1 does not exist
>>>>>root at arun-Aspire-5742:~# vi /etc/swift/account-server.conf
>>>>>root at arun-Aspire-5742:~# mount d1 /srv/node/d1
>>>>>mount: special device d1 does not exist
>>>>>root at arun-Aspire-5742:~# cd /opt/swift/etc
>>>>>root at arun-Aspire-5742:/opt/swift/etc# mount d1 /srv/node/d1
>>>>>mount: special device d1 does not exist
>>>>>root at arun-Aspire-5742:/opt/swift/etc# sudo reboot
>>>>>
>>>>>
>>>>>root at arun-Aspire-5742:~# mount
>>>>>/dev/sda4 on / type ext4 (rw,errors=remount-ro)
>>>>>proc on /proc type proc (rw,noexec,nosuid,nodev)
>>>>>sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
>>>>>none on /sys/fs/fuse/connections type fusectl (rw)
>>>>>none on /sys/kernel/debug type debugfs (rw)
>>>>>none on /sys/kernel/security type securityfs (rw)
>>>>>udev on /dev type devtmpfs (rw,mode=0755)
>>>>>devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
>>>>>tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
>>>>>none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
>>>>>none on /run/shm type tmpfs (rw,nosuid,nodev)
>>>>>gvfs-fuse-daemon on /home/arun/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=arun)
>>>>>
>>>>>
>>>>>I am attaching some screenshots which tells what I had done earlier when I was preparing and mounting the devices.
>>>>>
>>>>>>________________________________
>>>>>> From: Clay Gerrard <clay.gerrard at gmail.com>
>>>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>Cc: "pangj at laposte.net" <pangj at laposte.net>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>Sent: Friday, 6 September 2013 8:58 PM
>>>>>>
>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>
>>>>>>
>>>>>>
>>>>>>Sep 4 11:14:04 arun-Aspire-5742 proxy-server ERROR Insufficient Storage 127.0.0.1:6002/d1 (txn: txb0d8717ab05c4cf0bdebd-005226c8a4)
>>>>>>
>>>>>>
>>>>>>The account server on 127.0.0.1:6002/d1 returned 507 indicating it couldn't find a useable file system for the device labeled d1.
>>>>>>
>>>>>>
>>>>>>The account server has a config option "devices" in the "DEFAULT" section of "/etc/swift/account-server.conf" that will indicate the base mount point for devices (typicailly it's "/srv/node"). That path is prepended to the device name that's sent in the request ("d1" in this case).
>>>>>>
>>>>>>
>>>>>>So there should be a filesystem (xfs typically) mounted at "/srv/node/d1"
>>>>>>
>>>>>>
>>>>>>Try mounting it manually `mount d1 /srv/node/d1` and double check the output from `mount` and your "/etc/fstab"
>>>>>>
>>>>>>
>>>>>>
>>>>>>On Thu, Sep 5, 2013 at 9:39 PM, pragya jain <prag_2648 at yahoo.co.in> wrote:
>>>>>>
>>>>>>please help me in this regard.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>________________________________
>>>>>>>> From: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>To: Clay Gerrard <clay.gerrard at gmail.com>
>>>>>>>>
>>>>>>>>Cc: "pangj at laposte.net" <pangj at laposte.net>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>Sent: Thursday, 5 September 2013 10:02 AM
>>>>>>>>
>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>root at arun-Aspire-5742:~# grep txb0d8717ab05c4cf0bdebd-005226c8a4 /var/log/syslogSep 4 11:14:04 arun-Aspire-5742 account-server 127.0.0.1 - - [04/Sep/2013:05:44:04 +0000] "GET /d1/19164/AUTH_prag2648" 507 - "txb0d8717ab05c4cf0bdebd-005226c8a4" "GET http://localhost:8080/v1/AUTH_prag2648/" "proxy-server 3182" 0.0021 ""
>>>>>>>>Sep 4 11:14:04 arun-Aspire-5742 proxy-server ERROR Insufficient Storage 127.0.0.1:6002/d1 (txn: txb0d8717ab05c4cf0bdebd-005226c8a4)
>>>>>>>>Sep 4 11:14:05 arun-Aspire-5742 proxy-server Account GET returning 503 for [507] (txn: txb0d8717ab05c4cf0bdebd-005226c8a4) (client_ip: 127.0.0.1)
>>>>>>>>Sep 4 11:14:05 arun-Aspire-5742 proxy-server 127.0.0.1 127.0.0.1 04/Sep/2013/05/44/05 GET /v1/AUTH_prag2648/ HTTP/1.0 503 - curl/7.22.0%20%28i686-pc-linux-gnu%29%20libcurl/7.22.0%20OpenSSL/1.0.1%20zlib/1.2.3.4%20libidn/1.23%20librtmp/2.3 AUTH_tk4be7b90194c747468c4973675db15ca5 - 118 - txb0d8717ab05c4cf0bdebd-005226c8a4 - 0.2774 - -
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>________________________________
>>>>>>>>> From: Clay Gerrard <clay.gerrard at gmail.com>
>>>>>>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>Cc: "pangj at laposte.net" <pangj at laposte.net>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>Sent: Wednesday, 4 September 2013 9:12 PM
>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>So the builder files look right, you should grep the logs for the transaction id of the request that 503'd and see if the proxy is still getting connection errors (i.e. still trying to connect to 10.0.2.15)
>>>>>>>>>
>>>>>>>>>grep txb0d8717ab05c4cf0bdebd-005226c8a4 /var/log/syslog
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>If the proxy is still going to the old 10.0.2.15 you need to rebalance your rings
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>swift-ring-builder account.builder reblanace
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>-Clay
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>On Tue, Sep 3, 2013 at 10:51 PM, pragya jain <prag_2648 at yahoo.co.in> wrote:
>>>>>>>>>
>>>>>>>>>root at arun-Aspire-5742:/etc/swift# swift-ring-builder object.builder
>>>>>>>>>>object.builder, build version 14
>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>> 2 1 1 127.0.0.1 6000 127.0.0.1 6000 d1 100.00 786432 0.00
>>>>>>>>>>root at arun-Aspire-5742:/etc/swift# swift-ring-builder account.builder
>>>>>>>>>>account.builder, build version 14
>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>> 2 1 1 127.0.0.1 6002 127.0.0.1 6002 d1 100.00 786432 0.00
>>>>>>>>>>root at arun-Aspire-5742:/etc/swift# swift-ring-builder container.builder
>>>>>>>>>>container.builder, build version 11
>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>> 1 1 1 127.0.0.1 6001 127.0.0.1 6001 d1 100.00 786432 0.00
>>>>>>>>>>root at arun-Aspire-5742:/etc/swift# cd ~
>>>>>>>>>>root at arun-Aspire-5742:~# sudo swift-init account start
>>>>>>>>>>Starting account-server...(/etc/swift/account-server.conf)
>>>>>>>>>>root at arun-Aspire-5742:~# sudo swift-init proxy start
>>>>>>>>>>Starting proxy-server...(/etc/swift/proxy-server.conf)
>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Auth-User:prag2648:pragya' -H 'X-Auth-Key:pj2648' http://localhost:8080/auth/v1.0/
>>>>>>>>>>* About to connect() to localhost port 8080 (#0)
>>>>>>>>>>* Trying 127.0.0.1... connected
>>>>>>>>>>> GET /auth/v1.0/ HTTP/1.1
>>>>>>>>>>> User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3
>>>>>>>>>>> Host: localhost:8080
>>>>>>>>>>> Accept: */*
>>>>>>>>>>> X-Auth-User:prag2648:pragya
>>>>>>>>>>> X-Auth-Key:pj2648
>>>>>>>>>>>
>>>>>>>>>>< HTTP/1.1 200 OK
>>>>>>>>>>< X-Storage-Url: http://localhost:8080/v1/AUTH_prag2648
>>>>>>>>>>< X-Auth-Token: AUTH_tk4be7b90194c747468c4973675db15ca5
>>>>>>>>>>< Content-Type: text/html; charset=UTF-8
>>>>>>>>>>< X-Storage-Token: AUTH_tk4be7b90194c747468c4973675db15ca5
>>>>>>>>>>< Content-Length: 0
>>>>>>>>>>< X-Trans-Id: txc07e87d3d4b8487b85d89-005226c820
>>>>>>>>>>< Date: Wed, 04 Sep 2013 05:41:52 GMT
>>>>>>>>>><
>>>>>>>>>>* Connection #0 to host localhost left intact
>>>>>>>>>>* Closing connection #0
>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Storage-Token:AUTH_tk4be7b90194c747468c4973675db15ca5' http://127.0.0.1:8080/v1/AUTH_prag2648/
>>>>>>>>>>* About to connect() to 127.0.0.1 port 8080 (#0)
>>>>>>>>>>* Trying 127.0.0.1... connected
>>>>>>>>>>> GET /v1/AUTH_prag2648/ HTTP/1.1
>>>>>>>>>>> User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3
>>>>>>>>>>> Host: 127.0.0.1:8080
>>>>>>>>>>> Accept: */*
>>>>>>>>>>> X-Storage-Token:AUTH_tk4be7b90194c747468c4973675db15ca5
>>>>>>>>>>>
>>>>>>>>>>< HTTP/1.1 503 Internal Server Error
>>>>>>>>>>< Content-Length: 118
>>>>>>>>>>< Content-Type: text/html; charset=UTF-8
>>>>>>>>>>< X-Trans-Id: tx2301beb46542488597d23-005226c87d
>>>>>>>>>>< Date: Wed, 04 Sep 2013 05:43:26 GMT
>>>>>>>>>><
>>>>>>>>>>* Connection #0 to host 127.0.0.1 left intact
>>>>>>>>>>* Closing connection #0
>>>>>>>>>><html><h1>Service Unavailable</h1><p>The server is currently unavailable. Please try again at a later time.</p></html>root at arun-Aspire-5742:~#
>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Storage-Token:AUTH_tk4be7b90194c747468c4973675db15ca5' http://127.0.0.1/v1/AUTH_prag2648/
>>>>>>>>>>* About to connect() to 127.0.0.1 port 80 (#0)
>>>>>>>>>>* Trying 127.0.0.1... Connection refused
>>>>>>>>>>* couldn't connect to host
>>>>>>>>>>* Closing connection #0
>>>>>>>>>>curl: (7) couldn't connect to host
>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Storage-Token:AUTH_tk4be7b90194c747468c4973675db15ca5' http://localhost:8080/v1/AUTH_prag2648/
>>>>>>>>>>* About to connect() to localhost port 8080 (#0)
>>>>>>>>>>* Trying 127.0.0.1... connected
>>>>>>>>>>> GET /v1/AUTH_prag2648/ HTTP/1.1
>>>>>>>>>>> User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3
>>>>>>>>>>> Host: localhost:8080
>>>>>>>>>>> Accept: */*
>>>>>>>>>>> X-Storage-Token:AUTH_tk4be7b90194c747468c4973675db15ca5
>>>>>>>>>>>
>>>>>>>>>>< HTTP/1.1 503 Internal Server Error
>>>>>>>>>>< Content-Length: 118
>>>>>>>>>>< Content-Type: text/html; charset=UTF-8
>>>>>>>>>>< X-Trans-Id: txb0d8717ab05c4cf0bdebd-005226c8a4
>>>>>>>>>>< Date: Wed, 04 Sep 2013 05:44:05 GMT
>>>>>>>>>><
>>>>>>>>>>* Connection #0 to host localhost left intact
>>>>>>>>>>* Closing connection #0
>>>>>>>>>><html><h1>Service Unavailable</h1><p>The server is currently unavailable. Please try again at a later time.</p></html>root at arun-Aspire-5742:~#
>>>>>>>>>>root at arun-Aspire-5742:~# grep txa4c98c518382430ab9f5f-005222dede /var/log/syslogroot at arun-Aspire-5742:~#
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>________________________________
>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>Cc: Gareth <academicgareth at gmail.com>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>Sent: Friday, 30 August 2013 1:15 PM
>>>>>>>>>>>
>>>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>Hmm....
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>1) No Container and Object servers are running
>>>>>>>>>>>2) Only one drive in the ring
>>>>>>>>>>>3) No device been mount to /srv/node/* , unless you are disabling mount_check
>>>>>>>>>>>4) Did you setup rsync yet ?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>Maybe you can follow the online document to complete the above items.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>Good luck~
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>+Hugo Kuo+
>>>>>>>>>>>hugo at swiftstack.com
>>>>>>>>>>>
>>>>>>>>>>>tonytkdk at gmail.com
>>>>>>>>>>>
>>>>>>>>>>>+886 935004793
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>2013/8/30 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>
>>>>>>>>>>>root at arun-Aspire-5742:~# swift-ring-builder /etc/swift/account.builder
>>>>>>>>>>>>/etc/swift/account.builder, build version 1
>>>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>>>> 0 1 1 10.0.2.15 6000 10.0.2.15 6000 d1 100.00 786432 0.00
>>>>>>>>>>>>root at arun-Aspire-5742:~# swift-ring-builder /etc/swift/container.builder
>>>>>>>>>>>>/etc/swift/container.builder, build version 1
>>>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>>>> 0 1 1 10.0.2.15 6001 10.0.2.15 6001 d1 100.00 786432 0.00
>>>>>>>>>>>>root at arun-Aspire-5742:~# swift-ring-builder /etc/swift/object.builder
>>>>>>>>>>>>/etc/swift/object.builder, build version 1
>>>>>>>>>>>>262144 partitions, 3.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 balance
>>>>>>>>>>>>The minimum number of hours before a partition can be reassigned is 24
>>>>>>>>>>>>Devices: id region zone ip address port replication ip replication port name weight partitions balance meta
>>>>>>>>>>>> 0 1 1 10.0.2.15 6002 10.0.2.15 6002 d1 100.00 786432 0.00
>>>>>>>>>>>>root at arun-Aspire-5742:~# ps aux | grep swift
>>>>>>>>>>>>swift 5174 0.0 0.1 18700 11548 ? Ss 10:45 0:00 /usr/bin/python /usr/local/bin/swift-account-server /etc/swift/account-server.conf
>>>>>>>>>>>>swift 5181 0.0 0.1 18976 9624 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-account-server /etc/swift/account-server.conf
>>>>>>>>>>>>swift 5182 0.0 0.1 18992 9616 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-account-server /etc/swift/account-server.conf
>>>>>>>>>>>>swift 5183 0.0 0.1 18992 9620 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-account-server /etc/swift/account-server.conf
>>>>>>>>>>>>swift 5184 0.0 0.1 18992 9632 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-account-server /etc/swift/account-server.conf
>>>>>>>>>>>>swift 5192 0.0 0.2 18296 11812 ? Ss 10:45 0:00 /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>swift 5197 0.0 0.2 23512 15552 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>swift 5198 0.0 0.2 23524 15628 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>swift 5199 0.0 0.2 23524 15300 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>swift 5200 0.0 0.2 23524 15300 ? S 10:45 0:00 /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>root 6986 0.0 0.0 4388 828 pts/0 S+ 11:46 0:00 grep --color=auto swift
>>>>>>>>>>>>root at arun-Aspire-5742:~# df -h
>>>>>>>>>>>>Filesystem Size Used Avail Use% Mounted on
>>>>>>>>>>>>/dev/sda4 170G 3.8G 158G 3% /
>>>>>>>>>>>>udev 2.8G 4.0K 2.8G 1% /dev
>>>>>>>>>>>>tmpfs 1.2G 908K 1.2G 1% /run
>>>>>>>>>>>>none 5.0M 4.0K 5.0M 1% /run/lock
>>>>>>>>>>>>none 2.8G 220K 2.8G 1% /run/shm
>>>>>>>>>>>>/dev/sda2 98G 25G 73G 26% /media/D8EA06E4EA06BEAE
>>>>>>>>>>>>/dev/sda5 98G 54G 45G 55% /media/8AE41BA8E41B9613
>>>>>>>>>>>>root at arun-Aspire-5742:~# ls /srv/node/*
>>>>>>>>>>>>/srv/node/d1:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>/srv/node/d2:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>/srv/node/d3:
>>>>>>>>>>>>root at arun-Aspire-5742:~# netstat -antulp
>>>>>>>>>>>>Active Internet connections (servers and established)
>>>>>>>>>>>>Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
>>>>>>>>>>>>tcp 0 0 127.0.0.1:11211 0.0.0.0:* LISTEN 941/memcached
>>>>>>>>>>>>tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 5192/python
>>>>>>>>>>>>tcp 0 0 0.0.0.0:6002 0.0.0.0:* LISTEN 5174/python
>>>>>>>>>>>>tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 6936/dnsmasq
>>>>>>>>>>>>tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 596/cupsd
>>>>>>>>>>>>tcp 0 0 101.58.138.11:56680 207.171.162.71:443 ESTABLISHED 2042/chrome
>>>>>>>>>>>>tcp 0 0 127.0.0.1:11211 127.0.0.1:45287 ESTABL
>>>>>>>>>>>>ISHED 941/memcached
>>>>>>>>>>>>tcp 0 0 127.0.0.1:11211 127.0.0.1:45292 ESTABLISHED 941/memcached
>>>>>>>>>>>>tcp 0 0 127.0.0.1:45287 127.0.0.1:11211 ESTABLISHED 5197/python
>>>>>>>>>>>>tcp 1 0 101.58.138.11:34377 91.189.89.144:80 CLOSE_WAIT 1674/ubuntu-geoip-p
>>>>>>>>>>>>tcp 0 0 127.0.0.1:45292 127.0.0.1:11211 ESTABLISHED 5198/python
>>>>>>>>>>>>tcp6 0 0 ::1:631 :::* LISTEN 596/cupsd
>>>>>>>>>>>>udp 0 0 127.0.0.1:11211 0.0.0.0:* 941/memcached
>>>>>>>>>>>>udp 0 0 0.0.0.0:46638 0.0.0.0:* 576/avahi-daemon: r
>>>>>>>>>>>>udp 0 0 127.0.0.1:53 0.0.0.0:* 6936/dnsmasq
>>>>>>>>>>>>udp 0 0 0.0.0.0:5353 0.0.0.0:* 576/avahi-daemon: r
>>>>>>>>>>>>udp6 0 0 :::55335 :::* 576/avahi-daemon: r
>>>>>>>>>>>>udp6 0 0 :::5353 :::* 576/avahi-daemon: r
>>>>>>>>>>>>root at arun-Aspire-5742:~# swift-init all status
>>>>>>>>>>>>No container-updater running
>>>>>>>>>>>>No account-auditor running
>>>>>>>>>>>>No object-replicator running
>>>>>>>>>>>>proxy-server running (5192 - /etc/swift/proxy-server.conf)
>>>>>>>>>>>>No container-replicator running
>>>>>>>>>>>>No object-auditor running
>>>>>>>>>>>>No object-expirer running
>>>>>>>>>>>>No container-auditor running
>>>>>>>>>>>>No container-server running
>>>>>>>>>>>>account-server running (5174 - /etc/swift/account-server.conf)
>>>>>>>>>>>>No account-reaper running
>>>>>>>>>>>>No container-sync running
>>>>>>>>>>>>No account-replicator running
>>>>>>>>>>>>No object-updater running
>>>>>>>>>>>>No object-server running
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>________________________________
>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>Cc: Gareth <academicgareth at gmail.com>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>Sent: Friday, 30 August 2013 11:23 AM
>>>>>>>>>>>>>
>>>>>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>Hi Pragya :
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>I'm in highly recommends that you can go through the Swift online document http://docs.openstack.org/developer/swift/index.html .
>>>>>>>>>>>>>It's a good place to understand the basic architecture, especially swift *terms*
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>Check rings :
>>>>>>>>>>>>>$> swift-ring-builder /etc/swift/object.builder
>>>>>>>>>>>>>>$> swift-ring-builder /etc/swift/container.builder
>>>>>>>>>>>>>>$> swift-ring-builder /etc/swift/account.builder
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>Check Swift workers :
>>>>>>>>>>>>>$> swift-init all status
>>>>>>>>>>>>>>$> ps aux | grep swift
>>>>>>>>>>>>>>$> df -h
>>>>>>>>>>>>>>$> ls /srv/node/*
>>>>>>>>>>>>>>$> netstat -antulp
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>+Hugo Kuo+
>>>>>>>>>>>>>hugo at swiftstack.com
>>>>>>>>>>>>>
>>>>>>>>>>>>>tonytkdk at gmail.com
>>>>>>>>>>>>>
>>>>>>>>>>>>>+886 935004793
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>2013/8/30 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>
>>>>>>>>>>>>>hello sir,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>I am working on single node.
>>>>>>>>>>>>>>Please let me know how to check network topology and ring structure.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>________________________________
>>>>>>>>>>>>>>> From: Gareth <academicgareth at gmail.com>
>>>>>>>>>>>>>>>To: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>Cc: pragya jain <prag_2648 at yahoo.co.in>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>Sent: Friday, 30 August 2013 8:11 AM
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Pragya
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>The v1.0 auth uses tempauth for swift, like what you config in proxy-server.conf. All account data is read from that file, so you couldn't add/delete account in tempauth without modifying config file and restart swift.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>BTW, your curl link here "curl -v -H 'X-Storage-Token:AUTH_tk3867b7599d5346559ee0baaa09e0f40d' http://localhost:8080/v1/AUTH_prag2648/" actually is a GET request, which means getting account data. If you config everything correctly, it must have valid response. And you logs are a better way to find what happened in this request (set log level to DEBUG, and you will get more details).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>On Fri, Aug 30, 2013 at 7:47 AM, Kuo Hugo <tonytkdk at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Hi Pragya,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>I need more information.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>1) Please draw a network topology of your environment
>>>>>>>>>>>>>>>>2) How many nodes do you have?
>>>>>>>>>>>>>>>>3) What's the ring looks like ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>Hugo Kuo
>>>>>>>>>>>>>>>>hugo at swiftstack.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>tonytkdk at gmail.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>+886 935004793
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>hello sir,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>connection is established successfully. But, when I try to create an account, I face the problem.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# sudo swift-init account start
>>>>>>>>>>>>>>>>>Starting account-server...(/etc/swift/account-server.conf)
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# sudo swift-init proxy start
>>>>>>>>>>>>>>>>>Starting proxy-server...(/etc/swift/proxy-server.conf)
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Auth-User:prag2648:pragya' -H 'X-Auth-Key:pj2648' http://localhost:8080/auth/v1.0/
>>>>>>>>>>>>>>>>>* About to connect() to localhost port 8080 (#0)
>>>>>>>>>>>>>>>>>* Trying 127.0.0.1... connected
>>>>>>>>>>>>>>>>>> GET /auth/v1.0/ HTTP/1.1
>>>>>>>>>>>>>>>>>> User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3
>>>>>>>>>>>>>>>>>> Host: localhost:8080
>>>>>>>>>>>>>>>>>> Accept: */*
>>>>>>>>>>>>>>>>>> X-Auth-User:prag2648:pragya
>>>>>>>>>>>>>>>>>> X-Auth-Key:pj2648
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>< HTTP/1.1 200 OK
>>>>>>>>>>>>>>>>>< X-Storage-Url: http://localhost:8080/v1/AUTH_prag2648
>>>>>>>>>>>>>>>>>< X-Auth-Token: AUTH_tk3867b7599d5346559ee0baaa09e0f40d
>>>>>>>>>>>>>>>>>< Content-Type: text/html; charset=UTF-8
>>>>>>>>>>>>>>>>>< X-Storage-Token: AUTH_tk3867b7599d5346559ee0baaa09e0f40d
>>>>>>>>>>>>>>>>>< Content-Length: 0
>>>>>>>>>>>>>>>>>< X-Trans-Id: txe2ab76a7617e40399f456-00521f3d16
>>>>>>>>>>>>>>>>>< Date: Thu, 29 Aug 2013 12:22:46 GMT
>>>>>>>>>>>>>>>>><
>>>>>>>>>>>>>>>>>* Connection #0 to host localhost left intact
>>>>>>>>>>>>>>>>>* Closing connection #0
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# python
>>>>>>>>>>>>>>>>>Python 2.7.3 (default, Apr 10 2013, 05:46:21)
>>>>>>>>>>>>>>>>>[GCC 4.6.3] on linux2
>>>>>>>>>>>>>>>>>Type "help", "copyright", "credits" or "license" for more information.
>>>>>>>>>>>>>>>>>>>> import swift.common.memcached as memcached
>>>>>>>>>>>>>>>>>>>> memcache = memcached.MemcacheRing(['127.0.0.1:11211'])
>>>>>>>>>>>>>>>>>>>> print memcache.get('AUTH_/user/prag2648:pragya')
>>>>>>>>>>>>>>>>>AUTH_tk3867b7599d5346559ee0baaa09e0f40d
>>>>>>>>>>>>>>>>>>>> print memcache.get('AUTH_/token/AUTH_tk3867b7599d5346559ee0baaa09e0f40d')
>>>>>>>>>>>>>>>>>[1377865366.826027, 'prag2648,prag2648:pragya,.reseller_admin,AUTH_prag2648']
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Storage-Token:AUTH_tk3867b7599d5346559ee0baaa09e0f40d' http://127.0.0.1/v1/Auth_prag2648/
>>>>>>>>>>>>>>>>>* About to connect() to 127.0.0.1 port 80 (#0)
>>>>>>>>>>>>>>>>>* Trying 127.0.0.1... Connection refused
>>>>>>>>>>>>>>>>>* couldn't connect to host
>>>>>>>>>>>>>>>>>* Closing connection #0
>>>>>>>>>>>>>>>>>curl: (7) couldn't connect to host
>>>>>>>>>>>>>>>>>root at arun-Aspire-5742:~# curl -v -H 'X-Storage-Token:AUTH_tk3867b7599d5346559ee0baaa09e0f40d' http://localhost:8080/v1/AUTH_prag2648/
>>>>>>>>>>>>>>>>>* About to connect() to localhost port 8080 (#0)
>>>>>>>>>>>>>>>>>* Trying 127.0.0.1... connected
>>>>>>>>>>>>>>>>>> GET /v1/AUTH_prag2648/ HTTP/1.1
>>>>>>>>>>>>>>>>>> User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.1 zlib/
>>>>>>>>>>>>>>>>>1.2.3.4 libidn/1.23 librtmp/2.3
>>>>>>>>>>>>>>>>>> Host: localhost:8080
>>>>>>>>>>>>>>>>>> Accept: */*
>>>>>>>>>>>>>>>>>> X-Storage-Token:AUTH_tk3867b7599d5346559ee0baaa09e0f40d
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>< HTTP/1.1 503 Internal Server Error
>>>>>>>>>>>>>>>>>< Content-Length: 118
>>>>>>>>>>>>>>>>>< Content-Type: text/html; charset=UTF-8
>>>>>>>>>>>>>>>>>< X-Trans-Id: txd6fd9eead36e4b74b0869-00521f3efe
>>>>>>>>>>>>>>>>>< Date: Thu, 29 Aug 2013 12:30:55 GMT
>>>>>>>>>>>>>>>>><
>>>>>>>>>>>>>>>>>* Connection #0 to host localhost left intact
>>>>>>>>>>>>>>>>>* Closing connection #0
>>>>>>>>>>>>>>>>><html><h1>Service Unavailable</h1><p>The server is currently unavailable. Please try again at a later time.</p></html>root at arun-Aspire-5742:~#
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>Please help me in this regard.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>---
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>Pragya Jain
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>________________________________
>>>>>>>>>>>>>>>>>> From: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>To: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>Sent: Thursday, 29 August 2013 4:47 PM
>>>>>>>>>>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>Thanks Kuo very much for this help.
>>>>>>>>>>>>>>>>>>connection is successfully established.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>________________________________
>>>>>>>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>>To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>Sent: Thursday, 29 August 2013 3:46 PM
>>>>>>>>>>>>>>>>>>>Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>curl -v -H 'X-Auth-User:admin:admin' -H 'X-Auth-Key:admin' http://localhost:8080/auth/v1.0/
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>+Hugo Kuo+
>>>>>>>>>>>>>>>>>>>hugo at swiftstack.com
>>>>>>>>>>>>>>>>>>>tonytkdk at gmail.com
>>>>>>>>>>>>>>>>>>>+886 935004793
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# netstat -antulp | grep 8080
>>>>>>>>>>>>>>>>>>>> tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 2421/python
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> user = swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ________________________________
>>>>>>>>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>>> To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>> Sent: Thursday, 29 August 2013 2:47 PM
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> gt; netstat -antulp | grep 8080
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 1) is 8080 port been used ?
>>>>>>>>>>>>>>>>>>>> 2) What's the value of *user* parameter in proxy-server.conf https://github.com/openstack/swift/blob/master/etc/proxy-server.conf-sample#L7
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> +Hugo Kuo+
>>>>>>>>>>>>>>>>>>>> hugo at swiftstack.com
>>>>>>>>>>>>>>>>>>>> tonytkdk at gmail.com
>>>>>>>>>>>>>>>>>>>> +886 935004793
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello sir,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I run the command:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# find / -name swift-proxy-server
>>>>>>>>>>>>>>>>>>>> /opt/swift/build/scripts-2.7/swift-proxy-server
>>>>>>>>>>>>>>>>>>>> /opt/swift/bin/swift-proxy-server
>>>>>>>>>>>>>>>>>>>> /usr/local/bin/swift-proxy-server
>>>>>>>>>>>>>>>>>>>> /usr/local/lib/python2.7/dist-packages/swift-1.9.2-py2.7.egg/EGG-INFO/scripts/swift-proxy-server
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# /usr/bin/python /usr/local/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>>>>>>>> File "/usr/local/bin/swift-proxy-server", line 5, in <module>
>>>>>>>>>>>>>>>>>>>> pkg_resources.run_script('swift==1.9.2', 'swift-proxy-server')
>>>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/dist-packages/pkg_resources.py", line 499, in run_script
>>>>>>>>>>>>>>>>>>>> self.require(requires)[0].run_script(script_name, ns)
>>>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/dist-packages/pkg_resources.py", line 1235, in run_script
>>>>>>>>>>>>>>>>>>>> execfile(script_filename, namespace, namespace)
>>>>>>>>>>>>>>>>>>>> File "/usr/local/lib/python2.7/dist-packages/swift-1.9.2-py2.7.egg/EGG-INFO/scripts/swift-proxy-server", line 22, in <module>
>>>>>>>>>>>>>>>>>>>> run_wsgi(conf_file, 'proxy-server', default_port=8080, **options)
>>>>>>>>>>>>>>>>>>>> File "/usr/local/lib/python2.7/dist-packages/swift-1.9.2-py2.7.egg/swift/common/wsgi.py", line 251, in run_wsgi
>>>>>>>>>>>>>>>>>>>> sock = get_socket(conf, default_port=kwargs.get('default_port', 8080))
>>>>>>>>>>>>>>>>>>>> File "/usr/local/lib/python2.7/dist-packages/swift-1.9.2-py2.7.egg/swift/common/wsgi.py", line 168, in get_socket
>>>>>>>>>>>>>>>>>>>> bind_addr[0], bind_addr[1], bind_timeout))
>>>>>>>>>>>>>>>>>>>> Exception: Could not bind to 0.0.0.0:8080 after trying for 30 seconds
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ________________________________
>>>>>>>>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>>> To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>> Sent: Thursday, 29 August 2013 2:19 PM
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> find out the swift-proxy-server binary in your OS. (The path in example just an assumption)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> gt; find / -name swift-proxy-server
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> +Hugo Kuo+
>>>>>>>>>>>>>>>>>>>> hugo at swiftstack.com
>>>>>>>>>>>>>>>>>>>> tonytkdk at gmail.com
>>>>>>>>>>>>>>>>>>>> +886 935004793
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello sir
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks for the help
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# /usr/bin/python /usr/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>>>>>>>>> /usr/bin/python: can't open file '/usr/bin/swift-proxy-server': [Errno 2] No such file or directory
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> this is the result of the command.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> please help in this regard.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> -----
>>>>>>>>>>>>>>>>>>>> Pragya Jain
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ________________________________
>>>>>>>>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>>> To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>> Sent: Thursday, 29 August 2013 1:20 PM
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Obviously, There's no proxy server running on your node.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please execute it on the node where proxy-server located:
>>>>>>>>>>>>>>>>>>>> (I assume the binary is in /usr/bin and conf file is in /etc/swift)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> gt; /usr/bin/python /usr/bin/swift-proxy-server /etc/swift/proxy-server.conf
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> What's the result ?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> +Hugo Kuo+
>>>>>>>>>>>>>>>>>>>> hugo at swiftstack.com
>>>>>>>>>>>>>>>>>>>> tonytkdk at gmail.com
>>>>>>>>>>>>>>>>>>>> +886 935004793
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello sir
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks for the suggestion.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> (1) I give the space between pj2648 and .admin and also between .admin and .reseller_admin and tried the connection again, but face the same problem
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# vi /etc/swift/proxy-server.conf
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> and make following changes:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> user_admin_admin = admin .admin .reseller_admin
>>>>>>>>>>>>>>>>>>>> user_test_tester = testing .admin
>>>>>>>>>>>>>>>>>>>> user_test2_tester2 = testing2 .admin
>>>>>>>>>>>>>>>>>>>> user_test_tester3 = testing3
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> user_prag2648_pragya = pj2648 .admin .reseller_admin
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> and then
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init account start
>>>>>>>>>>>>>>>>>>>> Starting account-server...(/etc/swift/account-server.conf)
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init proxy start
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Starting proxy-server...(/etc/swift/proxy-server.conf)
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# curl -v -H 'X-Auth-User:prag2648:pragya' -H 'X-Auth-Key:pj2648' http://localhost/auth/v1.0/
>>>>>>>>>>>>>>>>>>>> * About to connect() to localhost port 80 (#0)
>>>>>>>>>>>>>>>>>>>> * Trying 127.0.0.1... Connection refused
>>>>>>>>>>>>>>>>>>>> * couldn't connect to host
>>>>>>>>>>>>>>>>>>>> * Closing connection #0
>>>>>>>>>>>>>>>>>>>> curl: (7) couldn't connect to host
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> (2) I also tired the connection with user admin:admin
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# curl -v -H 'X-Auth-User:admin:admin' -H 'X-Auth-Key:admin' http://localhost/auth/v1.0/
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> * About to connect() to localhost port 80 (#0)
>>>>>>>>>>>>>>>>>>>> * Trying 127.0.0.1... Connection refused
>>>>>>>>>>>>>>>>>>>> * couldn't connect to host
>>>>>>>>>>>>>>>>>>>> * Closing connection #0
>>>>>>>>>>>>>>>>>>>> curl: (7) couldn't connect to host
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> (3) I also run the command to verify the port number of proxy
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# ps aux | grep proxy
>>>>>>>>>>>>>>>>>>>> nobody 2124 0.0 0.0 5384 1164 ? S 10:39 0:00 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --no-hosts --bind-interfaces --pid-file=/var/run/sendsigs.omit.d/network-manager.dnsmasq.pid --listen-address=127.0.0.1 --conf-file=/var/run/nm-dns-dnsmasq.conf --cache-size=0 --proxy-dnssec
>>>>>>>>>>>>>>>>>>>> root 2724 0.0 0.0 4368 828 pts/0 R+ 10:52 0:00 grep --color=auto proxy
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# netstat -antulp
>>>>>>>>>>>>>>>>>>>> Active Internet connections (servers and established)
>>>>>>>>>>>>>>>>>>>> Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
>>>>>>>>>>>>>>>>>>>> tcp 0 0 127.0.0.1:11211 0.0.0.0:* LISTEN 931/memcached
>>>>>>>>>>>>>>>>>>>> tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 2124/dnsmasq
>>>>>>>>>>>>>>>>>>>> tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 623/cupsd
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:51521 74.125.236.132:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 1 0 115.184.7.223:46280 91.189.89.144:80 CLOSE_WAIT 1663/ubuntu-geoip-p
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:60563 173.194.38.147:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:43256 124.124.201.179:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:41791 124.124.201.169:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:36669 124.124.252.9:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:51747 173.194.38.184:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:54229 74.125.236.44:443 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:36185 173.194.36.26:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp 0 0 115.184.7.223:38854 74.125.236.109:80 TIME_WAIT -
>>>>>>>>>>>>>>>>>>>> tcp6 0 0 ::1:631 :::* LISTEN 623/cupsd
>>>>>>>>>>>>>>>>>>>> udp 0 0 0.0.0.0:5353 0.0.0.0:* 619/avahi-daemon: r
>>>>>>>>>>>>>>>>>>>> udp 0 0 0.0.0.0:53489 0.0.0.0:* 619/avahi-daemon: r
>>>>>>>>>>>>>>>>>>>> udp 0 0 127.0.0.1:11211 0.0.0.0:* 931/memcached
>>>>>>>>>>>>>>>>>>>> udp 0 0 127.0.0.1:53 0.0.0.0:* 2124/dnsmasq
>>>>>>>>>>>>>>>>>>>> udp6 0 0 :::5353 :::* 619/avahi-daemon: r
>>>>>>>>>>>>>>>>>>>> udp6 0 0 :::36705 :::* 619/avahi-daemon: r
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please help to proceed further.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Pragya jain
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ________________________________
>>>>>>>>>>>>>>>>>>>> From: Kuo Hugo <tonytkdk at gmail.com>
>>>>>>>>>>>>>>>>>>>> To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> Cc: Amanda Plimpton <amanda at swiftstack.com>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>> Sent: Wednesday, 28 August 2013 9:59 PM
>>>>>>>>>>>>>>>>>>>> Subject: Re: [Openstack] Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 1) user_prag2648_pragya = pj2648.admin.reseller_admin try to have a space between pj2648 and .admin . How about to test with user admin:admin ?
>>>>>>>>>>>>>>>>>>>> 2) Verify the port number of proxy by
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> gt; ps aux | grep proxy
>>>>>>>>>>>>>>>>>>>> gt; netstat -antulp
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 3) Check the Proxy for how to setup bind_port https://github.com/openstack/swift/blob/master/etc/proxy-server.conf-sample
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> +Hugo Kuo+
>>>>>>>>>>>>>>>>>>>> hugo at swiftstack.com
>>>>>>>>>>>>>>>>>>>> tonytkdk at gmail.com
>>>>>>>>>>>>>>>>>>>> +886 935004793
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2013/8/29 pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello sir,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please help me in knowing how to use 8080 port
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ________________________________
>>>>>>>>>>>>>>>>>>>> From: Amanda Plimpton <amanda at swiftstack.com>
>>>>>>>>>>>>>>>>>>>> To: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> Cc: "joe at swiftstack.com" <joe at swiftstack.com>; "contact at swiftstack.com" <contact at swiftstack.com>; anita goel <goel.anita at gmail.com>
>>>>>>>>>>>>>>>>>>>> Sent: Tuesday, 27 August 2013 9:40 AM
>>>>>>>>>>>>>>>>>>>> Subject: Re: Fw: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Did Edward's suggestion of using port 8080 help at all? The error seems to indicate a network setting issue. You may wish to double check the settings and configuration.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Given your interest in Swift I would also recommend locating a nearby OpenStack group or attending an event such as http://openstackindia.wordpress.com/2013/08/14/openstack-india-day-2013-announced/
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thank you,
>>>>>>>>>>>>>>>>>>>> Amanda
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> SwiftStack Inc.
>>>>>>>>>>>>>>>>>>>> swiftstack.com
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, Aug 26, 2013 at 8:55 PM, pragya jain <prag_2648 at yahoo.co.in> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello sir!
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please help me in setting up Tempauth authentication & authorization with Swift.
>>>>>>>>>>>>>>>>>>>> same error is continued.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ----- Forwarded Message -----
>>>>>>>>>>>>>>>>>>>> From: pragya jain <prag_2648 at yahoo.co.in>
>>>>>>>>>>>>>>>>>>>> To: "joe at swiftstack.com" <joe at swiftstack.com>; "clay.gerrard at gmail.com" <clay.gerrard at gmail.com>; "contact at swiftstack.com" <contact at swiftstack.com>; "openstack at ask.openstack.org" <openstack at ask.openstack.org>; "openstack at lists.openstack.org" <openstack at lists.openstack.org>
>>>>>>>>>>>>>>>>>>>> Cc: anita goel <goel.anita at gmail.com>
>>>>>>>>>>>>>>>>>>>> Sent: Monday, 26 August 2013 12:06 PM
>>>>>>>>>>>>>>>>>>>> Subject: problem in setting up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> hello,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I have to configure proxy server.
>>>>>>>>>>>>>>>>>>>> For this,
>>>>>>>>>>>>>>>>>>>> I have to edit /etc/swift/swift.conf and change the swift_hash_path_suffix to something secret and then, start the proxy server process
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> for this, I use the following commands:
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# vi /etc/swift/swift.conf
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> make following changes (highlighted) in the file:
>>>>>>>>>>>>>>>>>>>> swift_hash_path_suffix =pragya
>>>>>>>>>>>>>>>>>>>> swift_hash_path_prefix =jain
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> save and exit.
>>>>>>>>>>>>>>>>>>>> then, I run the command:
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init proxy start
>>>>>>>>>>>>>>>>>>>> Starting proxy-server...(/etc/swift/proxy-server.conf)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Now, I have to set up Tempauth authentication & authorization with Swift
>>>>>>>>>>>>>>>>>>>> for this, I run the following command:
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# vi /etc/swift/proxy-server.conf
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> make following changes (highlighted) in the file:
>>>>>>>>>>>>>>>>>>>> allow_account_management =true
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>> [filter:tempauth]
>>>>>>>>>>>>>>>>>>>> use = egg:swift#tempauth
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>> user_admin_admin = admin .admin .reseller_admin
>>>>>>>>>>>>>>>>>>>> user_test_tester = testing .admin
>>>>>>>>>>>>>>>>>>>> user_test2_tester2 = testing2 .admin
>>>>>>>>>>>>>>>>>>>> user_test_tester3 = testing3
>>>>>>>>>>>>>>>>>>>> user_prag2648_pragya = pj2648.admin.reseller_admin
>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> save and exit
>>>>>>>>>>>>>>>>>>>> Then, run following commands:
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init account start
>>>>>>>>>>>>>>>>>>>> Starting account-server...(/etc/swift/account-server.conf)
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init proxy restart
>>>>>>>>>>>>>>>>>>>> Signal proxy-server pid: 2476 signal: 15
>>>>>>>>>>>>>>>>>>>> proxy-server (2476) appears to have stopped
>>>>>>>>>>>>>>>>>>>> Starting proxy-server...(/etc/swift/proxy-server.conf)
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# curl -v -H 'X-Auth-User:prag2648:pragya' -H 'X-Auth-Key:pj2648' http://localhost/auth/v1.0/
>>>>>>>>>>>>>>>>>>>> * About to connect() to localhost port 80 (#0)
>>>>>>>>>>>>>>>>>>>> * Trying 127.0.0.1... Connection refused
>>>>>>>>>>>>>>>>>>>> * couldn't connect to host
>>>>>>>>>>>>>>>>>>>> * Closing connection #0
>>>>>>>>>>>>>>>>>>>> curl: (7) couldn't connect to host
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> But, there is an error in establising a connection.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> if, I run the command to start proxy server, then it shows that proxy server is already started.
>>>>>>>>>>>>>>>>>>>> root at arun-Aspire-5742:~# sudo swift-init proxy start
>>>>>>>>>>>>>>>>>>>> proxy-server running (2935 - /etc/swift/proxy-server.conf)
>>>>>>>>>>>>>>>>>>>> proxy-server already started...
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Please help me in this regard.
>>>>>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Pragya Jain
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>>>>>>>>>> Post to : openstack at lists.openstack.org
>>>>>>>>>>>>>>>>>>>> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>>>>Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>>>>>>Post to : openstack at lists.openstack.org
>>>>>>>>>>>>>>>>Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>--
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Gareth
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Cloud Computing, OpenStack, Fitness, Basketball
>>>>>>>>>>>>>>>OpenStack contributor
>>>>>>>>>>>>>>>Company: UnitedStack
>>>>>>>>>>>>>>>My promise: if you find any spelling or grammar mistakes in my email from Mar 1 2013, notify me
>>>>>>>>>>>>>>>and I'll donate $1 or ¥1 to an open organization you specify.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>_______________________________________________
>>>>>>>>>>Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>Post to : openstack at lists.openstack.org
>>>>>>>>>>Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130911/1ed65e25/attachment.html>
More information about the Openstack
mailing list