[Openstack] No instance data found in start-local
Dhastha
dhasthagheer at gmail.com
Mon Oct 14 07:05:38 UTC 2013
Hi all,
I can not ping and ssh openstack instance. I have copied console-log here.
root at ControlNode:~# nova console-log my_instance
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-53-virtual (buildd at allspice) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #81-Ubuntu SMP Thu Aug
22 21:21:26 UTC 2013 (Ubuntu 3.2.0-53.81-virtual 3.2.50)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-53-virtual
root=LABEL=cloudimg-rootfs ro console=ttyS0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
[ 0.000000] BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdfffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fdad0] fdad0
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffd000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37726000 - 37b8b000
[ 0.000000] ACPI: RSDP 00000000000fd8e0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffd740 00034 (v01 BOCHS BXPCRSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP
00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffd9b0 02589 (v01 BXPC BXDSDT
00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 00040
[ 0.000000] ACPI: SSDT 00000000dfffd8b0 000FF (v01 BOCHS BXPCSSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dfffd7c0 0007A (v01 BOCHS BXPCAPIC
00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dfffd780 00038 (v01 BOCHS BXPCHPET
00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1cf7681, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000dfffd
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffd000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82880
r8192 d23616 u1048576
[ 0.000000] kvm-clock: cpu 0, msr 1:1fc13681, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 11fc0dd40
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1030021
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-53-virtual root=LABEL=cloudimg-rootfs
ro console=ttyS0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 4041712k/4718592k available (6556k kernel code,
524760k absent, 152120k reserved, 6639k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Detected 2893.426 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5786.85
BogoMIPS (lpj=11573704)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.010219] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012043] Mount-cache hash table entries: 256
[ 0.012671] Initializing cgroup subsys cpuacct
[ 0.013096] Initializing cgroup subsys memory
[ 0.013510] Initializing cgroup subsys devices
[ 0.013927] Initializing cgroup subsys freezer
[ 0.014340] Initializing cgroup subsys blkio
[ 0.014767] Initializing cgroup subsys perf_event
[ 0.015286] CPU: CPU feature xsave disabled, no CPUID level 0xd
[ 0.015838] mce: CPU supports 10 MCE banks
[ 0.021467] ACPI: Core revision 20110623
[ 0.022631] ftrace: allocating 26576 entries in 105 pages
[ 0.028185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028967] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
[ 0.032001] Performance Events: unsupported p6 CPU model 15 no PMU
driver, software events only.
[ 0.032001] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.032001] Booting Node 0, Processors #1 Ok.
[ 0.008000] CPU: CPU feature xsave disabled, no CPUID level 0xd
[ 0.048013] kvm-clock: cpu 1, msr 1:1fd13681, secondary cpu clock
[ 0.048023] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.048046] Brought up 2 CPUs
[ 0.048048] Total of 2 processors activated (11573.70 BogoMIPS).
[ 0.048045] KVM setup async PF for cpu 1
[ 0.048045] kvm-stealtime: cpu 1, msr 11fd0dd40
[ 0.053506] devtmpfs: initialized
[ 0.053506] EVM: security.selinux
[ 0.053506] EVM: security.SMACK64
[ 0.053506] EVM: security.capability
[ 0.056380] print_constraints: dummy:
[ 0.056802] RTC time: 6:52:44, date: 10/14/13
[ 0.057252] NET: Registered protocol family 16
[ 0.057871] ACPI: bus type pci registered
[ 0.058335] PCI: Using configuration type 1 for base access
[ 0.059483] Trying to unpack rootfs image as initramfs...
[ 0.068780] bio: create slab <bio-0> at 0
[ 0.069299] ACPI: Added _OSI(Module Device)
[ 0.069695] ACPI: Added _OSI(Processor Device)
[ 0.070101] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.070527] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072747] ACPI: Interpreter enabled
[ 0.073106] ACPI: (supports S0 S3 S4 S5)
[ 0.073546] ACPI: Using IOAPIC for interrupt routing
[ 0.084842] ACPI: No dock devices found.
[ 0.085211] HEST: Table not found.
[ 0.085543] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.086414] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.088815] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by
PIIX4 ACPI
[ 0.089494] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.098037] pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
[ 0.110747] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.111383] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.111999] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.112234] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.112856] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.120139] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.120901] vgaarb: loaded
[ 0.121154] vgaarb: bridge control possible 0000:00:02.0
[ 0.121770] i2c-core: driver [aat2870] using legacy suspend method
[ 0.122336] i2c-core: driver [aat2870] using legacy resume method
[ 0.122974] SCSI subsystem initialized
[ 0.132167] usbcore: registered new interface driver usbfs
[ 0.132732] usbcore: registered new interface driver hub
[ 0.133422] usbcore: registered new device driver usb
[ 0.134180] PCI: Using ACPI for IRQ routing
[ 0.134850] NetLabel: Initializing
[ 0.135174] NetLabel: domain hash size = 128
[ 0.135577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.136028] NetLabel: unlabeled traffic allowed by default
[ 0.136880] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.137556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.138057] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.157670] Switching to clocksource kvm-clock
[ 0.164287] AppArmor: AppArmor Filesystem Enabled
[ 0.164782] pnp: PnP ACPI init
[ 0.165085] ACPI: bus type pnp registered
[ 0.166133] pnp: PnP ACPI: found 8 devices
[ 0.166535] ACPI: ACPI bus type pnp unregistered
[ 0.173076] NET: Registered protocol family 2
[ 0.173589] Freeing initrd memory: 4500k freed
[ 0.173612] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.174704] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.179470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.180676] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.181256] TCP reno registered
[ 0.181543] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182113] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182790] NET: Registered protocol family 1
[ 0.183193] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.183727] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.184275] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.184932] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.185455] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11
(level, high) -> IRQ 11
[ 0.186205] pci 0000:00:01.2: PCI INT D disabled
[ 0.186675] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.187240] Placing 64MB software IO TLB between ffff8800dbffb000 -
ffff8800dfffb000
[ 0.187913] software IO TLB at phys 0xdbffb000 - 0xdfffb000
[ 0.189054] audit: initializing netlink socket (disabled)
[ 0.189571] type=2000 audit(1381733566.188:1): initialized
[ 0.208419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.210960] VFS: Disk quotas dquot_6.5.2
[ 0.211376] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.212531] fuse init (API version 7.17)
[ 0.212982] msgmni has been set to 7902
[ 0.214168] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.214966] io scheduler noop registered
[ 0.215333] io scheduler deadline registered (default)
[ 0.215818] io scheduler cfq registered
[ 0.216262] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.216772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.217465] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.218136] ACPI: Power Button [PWRF]
[ 0.219235] ERST: Table is not found!
[ 0.219576] GHES: HEST is not enabled!
[ 0.220059] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.220588] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
10 (level, high) -> IRQ 10
[ 0.221477] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
11 (level, high) -> IRQ 11
[ 0.222434] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.222962] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
10 (level, high) -> IRQ 10
[ 0.223836] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.245437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.267021] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.349608] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.373981] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.376203] Linux agpgart interface v0.103
[ 0.377590] brd: module loaded
[ 0.378428] loop: module loaded
[ 0.380283] vda: vda1
[ 0.382151] scsi0 : ata_piix
[ 0.383058] scsi1 : ata_piix
[ 0.383702] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.384952] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.386698] Fixed MDIO Bus: probed
[ 0.387423] tun: Universal TUN/TAP device driver, 1.6
[ 0.388373] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.391357] PPP generic driver version 2.4.2
[ 0.392387] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.393586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.394733] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.395898] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
11 (level, high) -> IRQ 11
[ 0.397491] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.398508] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[ 0.399976] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[ 0.401323] hub 1-0:1.0: USB hub found
[ 0.402140] hub 1-0:1.0: 2 ports detected
[ 0.403063] usbcore: registered new interface driver libusual
[ 0.404311] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
at 0x60,0x64 irq 1,12
[ 0.406628] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.407101] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.407703] mousedev: PS/2 mouse device common for all mice
[ 0.408487] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.409504] rtc_cmos 00:01: RTC can wake from S4
[ 0.410079] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.410757] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.411448] device-mapper: uevent: version 1.0.3
[ 0.411959] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel at redhat.com
[ 0.412793] cpuidle: using governor ladder
[ 0.413194] cpuidle: using governor menu
[ 0.413588] EFI Variables Facility v0.08 2004-May-17
[ 0.414188] TCP cubic registered
[ 0.414603] NET: Registered protocol family 10
[ 0.415440] NET: Registered protocol family 17
[ 0.415857] Registering the dns_resolver key type
[ 0.416473] registered taskstats version 1
[ 0.423846] Magic number: 1:51:873
[ 0.444269] rtc_cmos 00:01: setting system clock to 2013-10-14
06:52:45 UTC (1381733565)
[ 0.445118] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.445690] EDD information not available.
[ 0.541829] Freeing unused kernel memory: 924k freed
[ 0.542923] Write protecting the kernel read-only data: 12288k
[ 0.550531] Freeing unused kernel memory: 1616k freed
[ 0.554101] Freeing unused kernel memory: 1192k freed
Loading, please wait...
[ 0.577970] udevd[88]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ 0.672467] FDC 0 is a S82078B
Begin: Running /scripts/local-premount ... [ 0.712075] usb 1-1: new
full-speed USB device number 2 using uhci_hcd
done.
[ 0.734592] EXT4-fs (vda1): mounted filesystem with ordered data
mode. Opts: (null)
Begin: Running /scripts/local-bottom ... [ 0.945564] vda: vda1
GROWROOT: CHANGED: partition=1 start=16065 old: size=4176900
end=4192965 new: size=83859300,end=83875365
[ 1.066447] EXT4-fs (vda1): mounted filesystem with ordered data
mode. Opts: (null)
done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 1.188120] Refined TSC clocksource calibration: 2893.460 MHz.
[ 1.769744] EXT4-fs (vda1): re-mounted. Opts: (null)
cloud-init start-local running: Mon, 14 Oct 2013 06:52:48 +0000. up 3.66 seconds
no instance data found in start-local
--
Cheers,
Dhasthagheer
Jr. Software Engineer
Fundamental Research Group
Indian Institute of Technology, Bombay
More information about the Openstack
mailing list