Open Stack

you may want to google about nova-network and neutron. BIG BIG difference. Swift is just an object store. you have br100 which will not work on neutron. Did you do a clean / unstack before you run the new stack.sh?


-- 
Remo Mattei


November 26, 2013 at 10:51:19, John Smith (lbalbalba at gmail.com) ha scritto:

Hi,  


So assuming you think the problem is the network, may I ask what  
logfile and logentry you noticed to make you suspect that ?  

I modified my localrc with your suggestions. When running stack.sh, I  
was asked for a swift password, and provided 'password'. (Do I need to  
set this elsewhere as well ?)  

Just curious: whats the difference between 'neutron' and 'nova network' ?  


After making your modifications, glance image creation fails :  

$ glance image-create --name=cirros-0.3.0-i386 --is-public=true  
--container-format=bare --disk-format=qcow2 <  
cirros-0.3.0-i386-disk.img  
Request returned failure status.  
400 Bad Request  
Client disconnected before sending all data to backend  
(HTTP 400)  


And just in case its relevant, here's the output of 'ifconfig -a'  

$ ifconfig -a  
br100: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500  
inet6 fe80::6cf3:5bff:fe8d:5525 prefixlen 64 scopeid 0x20<link>  
ether 6e:f3:5b:8d:55:25 txqueuelen 0 (Ethernet)  
RX packets 0 bytes 0 (0.0 B)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 6 bytes 468 (468.0 B)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  

br-ex: flags=67<UP,BROADCAST,RUNNING> mtu 1500  
inet 172.24.4.225 netmask 255.255.255.240 broadcast 0.0.0.0  
ether 4e:01:47:ef:50:4e txqueuelen 0 (Ethernet)  
RX packets 10 bytes 776 (776.0 B)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 1 bytes 90 (90.0 B)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  

br-int: flags=67<UP,BROADCAST,RUNNING> mtu 1500  
inet6 fe80::4c4:27ff:feef:a08d prefixlen 64 scopeid 0x20<link>  
ether 9e:6c:79:69:44:44 txqueuelen 0 (Ethernet)  
RX packets 21 bytes 1622 (1.5 KiB)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 6 bytes 468 (468.0 B)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536  
inet 127.0.0.1 netmask 255.0.0.0  
inet6 ::1 prefixlen 128 scopeid 0x10<host>  
loop txqueuelen 0 (Local Loopback)  
RX packets 231252 bytes 210037500 (200.3 MiB)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 231252 bytes 210037500 (200.3 MiB)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  

ovs-system: flags=4098<BROADCAST,MULTICAST> mtu 1500  
ether 82:71:ba:06:cf:46 txqueuelen 0 (Ethernet)  
RX packets 0 bytes 0 (0.0 B)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 0 bytes 0 (0.0 B)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  

p3p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500  
inet 192.168.126.142 netmask 255.255.255.0 broadcast 192.168.126.255  
inet6 fe80::20c:29ff:fe6e:32be prefixlen 64 scopeid 0x20<link>  
ether 00:0c:29:6e:32:be txqueuelen 1000 (Ethernet)  
RX packets 88561 bytes 61914618 (59.0 MiB)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 103321 bytes 15179500 (14.4 MiB)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  
device interrupt 19 base 0x2000  

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500  
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255  
ether 06:09:53:bb:c9:28 txqueuelen 0 (Ethernet)  
RX packets 0 bytes 0 (0.0 B)  
RX errors 0 dropped 0 overruns 0 frame 0  
TX packets 0 bytes 0 (0.0 B)  
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0  




Regards,  


John Smith.  

On Tue, Nov 26, 2013 at 7:08 PM, Remo Mattei <Remo at mattei.org> wrote:  
> I look through the logs and I would suggest to add neutron and not to use  
> nova network.  
>  
> so here is the one I use.  
>  
> add this below your PASSWORD and TOKEN options  
>  
> disable_service n-net  
> enable_service q-svc  
> enable_service q-agt  
> enable_service q-dhcp  
> enable_service q-lbaas  
> enable_service q-l3  
> enable_service q-meta  
> enable_service neutron  
> # Optional, to enable tempest configuration as part of devstack  
> enable_service tempest  
> enable_service s-proxy s-object s-container s-account  
> enable_service heat h-api h-api-cfn h-api-cw h-eng  
> #enable_service n-cell  
> SCREEN_LOGDIR=$DEST/logs/screen  
>  
>  
> let me know  
>  
>  
> --  
> Remo Mattei  
>  
>  

_______________________________________________  
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack  
Post to : openstack at lists.openstack.org  
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack  

!DSPAM:2,5294ee6b70891476013080!  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20131126/413a60d3/attachment.html>