[Openstack] [HyperV][Quantum] Quantum dhcp agent not working for Hyper-V

Peter Pouliot ppouliot at microsoft.com
Thu Jun 6 20:18:08 UTC 2013


Do you have your vswitch properly configured on your hyper-v host?

Are you using vlans?

P


Sent from my Verizon Wireless 4G LTE Smartphone



-------- Original message --------
From: Bruno Oliveira <brunnop.oliveira at gmail.com>
Date: 06/06/2013 3:55 PM (GMT-05:00)
To: Peter Pouliot <ppouliot at microsoft.com>
Cc: Steve Heistand <steve.heistand at nasa.gov>,OpenStack <openstack at lists.launchpad.net>
Subject: Re: [Openstack] [HyperV][Quantum] Quantum dhcp agent not working for Hyper-V


@Steve: yeah, the MAC I see in the DHCP REQUEST is the same that
shows up in the DHCP Server (quantum-server)


@Peter: Hmm, should I enable anything in special in 2012, that I do
not have to in 2008 R2 ?
Because apparently I'm still having the same issue... (I just setup
another host with Hyper-V 2012)

Thank you

--

Bruno Oliveira
Developer, Software Engineer





On Wed, Jun 5, 2013 at 10:46 PM, Peter Pouliot <ppouliot at microsoft.com> wrote:
> First off you should be using hyper-v from 2012 server.  2008 only supports
> flat networking as of the last time I used it.   All active development is
> geared towards 2012 hyper-v.   Functionality for  is minimal for 2008 which
> is also in the wmiv1 namespace.  The legacy/original wmiv1 is basically
> being replaced by wmiv2 for Havana.
>
> Try hyper-v server 2012, we give it away for free.
>
> And use that instead of 2008 hyper-v.  You will have better results and 90%
> more functionality.
>
> P
>
>
>
>
> Sent from my Verizon Wireless 4G LTE Smartphone
>
>
>
> -------- Original message --------
> From: Steve Heistand <steve.heistand at nasa.gov>
> Date: 06/05/2013 7:08 PM (GMT-05:00)
> To: Bruno Oliveira <brunnop.oliveira at gmail.com>
> Cc: OpenStack <openstack at lists.launchpad.net>
> Subject: Re: [Openstack] [HyperV][Quantum] Quantum dhcp agent not working
> for Hyper-V
>
>
> is the MAC addr coming from the hyper-v on the dhcp request the same one the
> dhcp-agent is
> expecting?
>
> s
>
>
> On 06/05/2013 03:23 PM, Bruno Oliveira wrote:
>> Hello all,
>>
>> Guys, there's something regarding quantum that we've been hitting our
>> heads
>> against a wall for a few weeks, but can't figure out. Can you please
>> take a look?
>>
>> Here's the scenario:
>>
>> We currently have a single-node devstack build, running nova (compute),
>> glance,
>> quantum (with OpenVSwitch), swift and cinder -- besides keystone and
>> ceilometer.
>>
>> On that very same machine, our kvm hypervisor is running. Everything
>> works like a charm with it:  dhcp, magic_ip (169.254.169.254), reaching
>> in/outside networks, etc.
>>
>>
>> Now for the issue: there's another host running hyper-v 2008 r2, and on
>> top of that, we got Cloudbase's (cloudbase.it) Compute Driver for Hyper-V.
>> That way, we're successfully being able to create VMs for it (Hyper-V),
>> BUT...
>>
>> Even though there's a virtual switch in there (hyper-v), the network for
>> the
>> instances are not working -> the instances are not being assigned with an
>> IP from quantum-dhcp UNLESS I use the FLAT NETWORK model to assign
>> a public ip for each of them.   So...
>>
>> 1. Is there a must  to have ANOTHER quantum-server just for hyper-v nodes
>> taking that I do not want to use Flat Network ?
>> (by another, I mean one besides the working one I have for KVM)
>>
>> 2. In our case, we're intending to have NAT IPs for each of the instance
>> we
>> have running on hyper-v, not public_ips directly assigned to them, is
>> it possible?
>>
>> After all the testing and research we did, we concluded that  we CAN
>> see the DHCP broadcast coming from hyper-v (via tcpdump'ing on
>> any interface that is on the same subnet) but the DHCP response/reply
>> is not working.
>>
>> Note:  "$quantum agent-list"  DOES list the quantum-agent from kvm
>> but not from hyper-v
>>
>> Does anyone have any guesses or suggestions of what we could
>> possibly try ?
>>
>>
>> Thank you a lot
>>
>> --
>>
>> Bruno Oliveira
>> Developer, Software Engineer
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~openstack
>> Post to     : openstack at lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~openstack
>> More help   : https://help.launchpad.net/ListHelp
>>
>
> --
> ************************************************************************
>  Steve Heistand                           NASA Ames Research Center
>  SciCon Group                             Mail Stop 258-6
>  steve.heistand at nasa.gov  (650) 604-4369  Moffett Field, CA 94035-1000
> ************************************************************************
>  "Any opinions expressed are those of our alien overlords, not my own."
>
> # For Remedy                        #
> #Action: Resolve                    #
> #Resolution: Resolved               #
> #Reason: No Further Action Required #
> #Tier1: User Code                   #
> #Tier2: Other                       #
> #Tier3: Assistance                  #
> #Notification: None                 #
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130606/ef4694ed/attachment.html>


More information about the Openstack mailing list