Open Stack

Can you change the net configuration? 

kvm -m 2048 -cdrom windows_server_2012_x64.iso -drive file=windows_server_2012.img,if=scsi,index=0,boot=on -boot d -net nic,model=e1000, -net tap -nographic -vnc :10

thanks!


Razique Mahroua - Nuage & Co
razique.mahroua at gmail.com
Tel : +33 9 72 37 94 15



Le 2 juil. 2013 à 11:35, "Narayanan, Krishnaprasad" <narayana at uni-mainz.de> a écrit :
> Hi Razique,
>  
> I have executed the below command and got a warning message as I have mentioned below. I opened the VNC from GUI in order to install the Windows image, but I was unable to locate the virtio ISO image.
>  
> Do you see any problems in the command? Can you suggest any solutions in this regard?
>  
> Thanks
> Krishnaprasad
> From: Openstack [mailto:openstack-bounces+narayana=uni-mainz.de at lists.launchpad.net] On Behalf Of Narayanan, Krishnaprasad
> Sent: Donnerstag, 27. Juni 2013 00:15
> To: Razique Mahroua
> Cc: openstack at lists.launchpad.net
> Subject: Re: [Openstack] Windows Image in OpenStack
>  
> Hi,
>  
> I executed the below command
> “kvm -m 2048 -no-reboot -boot order=d -drive file=windows_server_2012.img,if=virtio,boot=off -drive file=windows_server_2012_x64.iso,media=cdrom,boot=on -drive file=virtio-win-0.1-59.iso,media=cdrom,boot=off -net nic,model=virtio -nographic –vnc :1”
>  
> and I got the following warning “vlan0 is not connected to host network”. Is this a valid behavior?
>  
> When I connected to the VNC and tried to discover the Virtio driver, I was unable to discover it. Can anybody suggest where I am going wrong or any solution in order to get rid of the problem?
>  
> Thanks
> Krishnaprasad
> From: Razique Mahroua [mailto:razique.mahroua at gmail.com] 
> Sent: Samstag, 22. Juni 2013 20:23
> To: Narayanan, Krishnaprasad
> Cc: openstack at lists.launchpad.net
> Subject: Re: [Openstack] Windows Image in OpenStack
>  
> Can you try that command
>  
> kvm -m 2048 -no-reboot -boot order=d -drive file=windowsr2.img,if=virtio,boot=off -drive file=windows-2008r2.iso,media=cdrom,boot=on -drive file=virtio-win-0.1-30.iso,media=cdrom,boot=off -net nic,model=virtio -nographic -vnc :1
>  
> 
> Razique Mahroua - Nuage & Co
> razique.mahroua at gmail.com
> Tel : +33 9 72 37 94 15
> 
> <image001.jpg>
>  
>  
> Make sure to use the good comas and spaces :-)
>  
> regard
> Razique
>  
>  
> Le 21 juin 2013 à 11:58, "Narayanan, Krishnaprasad" <narayana at uni-mainz.de> a écrit :
>  
> 
> Hi,
>  
> Thanks for your response. When I execute the command (egrep ‘(vmx|svm)’ /proc/cpuinfo) in the compute node, I am getting an output that starts with “flags” and with several lines (refer image below). Any suggestions would be appreciated.
>  
> <image002.png>
>  
> Cheers,
> Krishnaprasad
>  
> From: Razique Mahroua [mailto:razique.mahroua at gmail.com] 
> Sent: Freitag, 21. Juni 2013 11:46
> To: Narayanan, Krishnaprasad
> Cc: openstack at lists.launchpad.net
> Subject: Re: [Openstack] Windows Image in OpenStack
>  
> Hey Krishnaprasad, 
> you cannot run kmv is the server doesn't contain the virtualization instruction.
> Can you run : 
> $ egrep '(vmx|svm)' /proc/cpuinfo
>  
> thanks!
>  
> Razique Mahroua - Nuage & Co
> razique.mahroua at gmail.com
> Tel : +33 9 72 37 94 15
> 
> <image001.jpg>
>  
> Le 21 juin 2013 à 11:22, "Narayanan, Krishnaprasad" <narayana at uni-mainz.de> a écrit :
> 
> 
> 
> Hallo All,
>  
> When I tried to execute the commands provided in the OpenStack guide for installing Windows Image, I am getting the following error: “kvm: -drive file=windows_server_2012.img: drive with bus=0, unit=0 (index=0) exists”.
>  
> The command was executed on a compute node that was virtualizable. Command was “kvm -m 2048 -no-reboot -boot order=d -drive file=windows_server_2012.img if=virtio,boot=off -drive file=windows_server_2012_x64.iso,media=cdrom boot=on -drive file=virtio-win-0.1-59.iso,media=cdrom,boot=off -net nic,model=virtio -nographic -vnc :1”.
>  
> Can anybody suggest me pointers to get rid of this problem?
>  
> Thanks
> Krishnaprasad
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130703/c6dfd2ae/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: NUAGECO-LOGO-Fblan_petit.jpg
Type: image/jpeg
Size: 10122 bytes
Desc: not available
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130703/c6dfd2ae/attachment.jpg>