Open Stack

Hi Jake, 
what options did you use in your localrc?  If you have run the ./stack.sh you have to unstack it before you stack it again. In addition you have to check and see if your dnsmasq is running so there are a few things to check but overall devstack is pretty simple. Let me know if you have any questions..

Remo


On Jul 29, 2013, at 08:05 , Jake G. <dj_dark_junglist at yahoo.com> wrote:

> After running stack.sh, logging into the dashboard, and launching an instance I do not receive a ip from the dhcp service. 
> 
> Do I have to define the floating IP range and other networking info in the localrc? Perhaps this is my issue.
> 
> Should I just run stack.sh without networking info?
> 
> 
> 
> On 2013/07/29, at 22:28, Roman Podolyaka <rpodolyaka at mirantis.com> wrote:
> 
>> Hello Jake,
>> 
>> If you are going to use Neutron for networking, Devstack uses the following configuration by default:
>>   - OpenVSwitch Neutron plugin is used for tenant L2-networking (tenant network type is 'local' by default, so you can only connect VMs running on a single node)
>>   - two bridges are created: br-int (for connection of VMs running on this node) and br-ex (to provide access to the external network)
>> 
>> No additional configuration is needed to deploy Devstack with Neutron enabled. After that you should be able to run VMs, create tenant networks, Neutron routers, etc.
>> 
>> Could you please elaborate more on the problem that you have?
>> 
>> Thanks,
>> Roman
>> 
>> 
>> On Mon, Jul 29, 2013 at 3:48 PM, Jake G. <Dj_dark_junglist at yahoo.com> wrote:
>> I think I'm getting the basic networking configuration wrong. 
>> 
>> I have a single Ubuntu  host with 2 nics. 
>> One nic has a static IP 
>> And the other is up but no config.
>> 
>> What about flat networking and all that stuff that goes into the localrc file? 
>> 
>> 
>> 
>> On 2013/07/29, at 21:18, Roman Podolyaka <rpodolyaka at mirantis.com> wrote:
>> 
>>> Hello Jake,
>>> 
>>> Do you want to deploy a single node Devstack installation that would use Neutron instead of Nova for networking?
>>> 
>>> It should be as simple as putting these lines into your localrc file and running stack.sh once again:
>>> 
>>> disable_service n-net
>>> enable_service q-svc
>>> enable_service q-agt
>>> enable_service q-dhcp
>>> enable_service q-l3
>>> enable_service q-meta
>>> enable_service quantum
>>> enable_service q-lbaas
>>> 
>>> Thanks,
>>> Roman
>>> 
>>> 
>>> On Mon, Jul 29, 2013 at 1:55 PM, Jake G. <dj_dark_junglist at yahoo.com> wrote:
>>> Networking for quantum is still kicking my butt.
>>> 
>>> Would any devstack users be kind enough to post your localrc network settings here?
>>> 
>>> I am using a allinone devstack node.
>>> 
>>> Thank you!
>>> 
>>> 
>>> _______________________________________________
>>> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> Post to     : openstack at lists.openstack.org
>>> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> 
>>> 
>> 
> !DSPAM:2,51f6b919244381354520966!
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack at lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> 
> 
> !DSPAM:2,51f6b919244381354520966!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130729/f7ec0ae4/attachment.html>