Open Stack

Hi Gary!

 Thank you for your fast answer!

 1. The plugin described on that guide;

 2.
   quantum-server running on folsom-controller;
   quantum-plugin-openvswitch / quantum-plugin-openvswitch-agent installed
and/or running within the three nodes;
   quantum-dhcp-agent running on folsom-network;
   quantum-l3-agent running on folsom-network.

 3. Can't find any errors on quantum log files, debug enabled on all nodes.
What kind of message can I look for?

 4. "ovs-vsctl show" output (no Instance running right now):

-------
root at folsom-controller:~# ovs-vsctl show
218d7774-104c-4d2d-ae9e-9a8dd9ca2450
    Bridge br-tun
        Port patch-int
            Interface patch-int
                type: patch
                options: {peer=patch-tun}
        Port br-tun
            Interface br-tun
                type: internal
    ovs_version: "1.4.0+build0"


root at folsom-network:~# ovs-vsctl show
b8b94a53-3294-44ba-855e-002af8fa80ba
    Bridge br-tun
        Port patch-int
            Interface patch-int
                type: patch
                options: {peer=patch-tun}
        Port "gre-2"
            Interface "gre-2"
                type: gre
                options: {in_key=flow, out_key=flow, remote_ip="10.0.0.2"}
        Port br-tun
            Interface br-tun
                type: internal
    Bridge br-ex
        Port "eth2"
            Interface "eth2"
        Port br-ex
            Interface br-ex
                type: internal
        Port "qg-168da5ed-dd"
            Interface "qg-168da5ed-dd"
                type: internal
    Bridge br-int
        Port "tapa0f18fc7-bc"
            tag: 1
            Interface "tapa0f18fc7-bc"
                type: internal
        Port br-int
            Interface br-int
                type: internal
        Port "qr-a8d8fda3-d7"
            tag: 1
            Interface "qr-a8d8fda3-d7"
                type: internal
        Port patch-tun
            Interface patch-tun
                type: patch
                options: {peer=patch-int}
    ovs_version: "1.4.0+build0"


root at folsom-compute:~# ovs-vsctl show
86ff13f6-960d-48c5-8e03-e8d688364dd0
    Bridge br-tun
        Port patch-int
            Interface patch-int
                type: patch
                options: {peer=patch-tun}
        Port "gre-1"
            Interface "gre-1"
                type: gre
                options: {in_key=flow, out_key=flow, remote_ip="10.10.10.1"}
        Port br-tun
            Interface br-tun
                type: internal
    Bridge br-int
        Port patch-tun
            Interface patch-tun
                type: patch
                options: {peer=patch-int}
        Port br-int
            Interface br-int
                type: internal
    ovs_version: "1.4.0+build0"
-------

 I followed that guide word by word. With a few changes (because I found
errors and missing informations on that guide) between the tries... Always
with the same result.

 BTW, I made a lots of comments on that guide webpage (I am Thiago
Martins)...

Thank you!
Thiago

On 3 January 2013 06:38, Gary Kotton <gkotton at redhat.com> wrote:

>  Hi,
> In order to be able to help can you please provide the following
> information:
> 1. Which plugin are you using? I assume that it is OpenvSwitch from the
> link :)
> 2. Are all of the Quantum services running:
>     - quantum-server
>     - quantum-openvswitch-agent
>     - quantum-dhcp-agent
> 3. Can you please check if there are any messages in quantum log files?
> 4. Can you also please provide the ovs-vsctl show results (this shows the
> tap device attached to the ovs)
> Thanks
> Gary
>
>
> On 01/03/2013 10:26 AM, Martinx - ジェームズ wrote:
>
> Hello!
>
>   I'm following this guide:
> http://docs.openstack.org/folsom/basic-install/content/basic-install_intro.html
>
>   And I'm getting this from my "Instance Log":
>
>  ----------
>  cloud-init start-local running: Thu, 03 Jan 2013 04:20:52 +0000. up 8.53
> seconds
>
>  no instance data found in start-local
>
>  cloud-init-nonet waiting 120 seconds for a network device.
>
>  cloud-init-nonet gave up waiting for a network device.
>
>  ci-info: lo : 1 127.0.0.1 255.0.0.0 .
>
>  ci-info: eth0 : 1 . . fa:16:3e:83:06:4f
>
>  route_info failed
>
>  Waiting for network configuration...
>
>  Waiting up to 60 more seconds for network configuration...
>
>  Booting system without full network configuration...
>  ----------
>
>   I already tried this guide more than 10 times, always from scratch
> and everytime I hit this problem.
>
>   I'm using Ubuntu 12.04 with Ubuntu Cloud Archives enabled.
>
>   What can I do?
>
>  Thanks!
> Thiago
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp
>
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130103/14b67523/attachment.html>