[Openstack] Cant ping private or floating IP
Sylvain Bauza
sylvain.bauza at digimind.com
Wed Feb 20 11:57:15 UTC 2013
Could you please paste :
- /etc/libvirt/qemu/<your_instance_id>.xml
- ip a show vnet0
- brctl show
Sounds like your virtual device is not created. Could you please launch
a new VM and paste /var/log/nova/nova-compute.log ?
Thanks,
-Sylvain
Le 18/02/2013 19:03, Chathura M. Sarathchandra Magurawalage a écrit :
> Hello guys,
>
> I think I have found something which could be the potential cause of
> this problem. I checked my /var/log/libvirt/libvirtd.log and found
> this. These errors occur when I spawn a VM or on reboot.
>
> 2013-02-18 14:38:04.654+0000: 22383: info : libvirt version: 0.9.13
> 2013-02-18 14:38:04.654+0000: 22383: error :
> virNWFilterSnoopLeaseFileRefresh:1882 :
> open("/var/run/libvirt/network/nwfilter.ltmp"): No such file or directory
> 2013-02-18 17:53:53.793+0000: 22372: error :
> virNWFilterDHCPSnoopEnd:2113 : internal error ifname "vnet0" not in
> key map
> 2013-02-18 17:53:53.795+0000: 22372: error : virNetDevGetIndex:657 :
> Unable to get index for interface vnet0: No such device
> 2013-02-18 17:53:58.311+0000: 22370: warning : x86Decode:1346 :
> Preferred CPU model SandyBridge not allowed by hypervisor; closest
> supported model will be used
> (END)
>
>
> Could this be the problem?
>
> Thanks
>
> -----------------------------------------------------------------------------------------------------------------------------
> Chathura Madhusanka Sarathchandra Magurawalage.
> 1NW.2.1, Desk 2
> School of Computer Science and Electronic Engineering
> University Of Essex
> United Kingdom.
>
> Email: csarata at essex.ac.uk <mailto:csarata at essex.ac.uk>
> chathura.sarathchandra at gmail.com <mailto:77.chathura at gmail.com>
> 77.chathura at gmail.com <mailto:77.chathura at gmail.com>
>
>
> On 18 February 2013 14:37, Chathura M. Sarathchandra Magurawalage
> <77.chathura at gmail.com <mailto:77.chathura at gmail.com>> wrote:
>
> I have spawned a VM using cirros-0.3.0-x86_64 image, but it hangs
> on the bootup. The log is as follows.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.0.0-12-virtual (buildd at crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
> [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
> [ 0.000000] ACPI: FACS 000000001fffff40 00040
> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
> [ 0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deffc000)
> [ 0.000000] Booting paravirtualized kernel on KVM
> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296 r8192 d23104 u2097152
> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
> [ 0.000000] KVM setup async PF for cpu 0
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129157
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 497852k/524276k available (6206k kernel code, 460k absent, 25964k reserved, 6907k data, 900k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] allocated 4194304 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Detected 3392.282 MHz processor.
> [ 0.008000] Calibrating delay loop (skipped) preset value.. 6784.56 BogoMIPS (lpj=13569128)
> [ 0.008000] pid_max: default: 32768 minimum: 301
> [ 0.008000] Security Framework initialized
> [ 0.008000] AppArmor: AppArmor initialized
> [ 0.008000] Yama: becoming mindful.
> [ 0.008000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.008311] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.009201] Mount-cache hash table entries: 256
> [ 0.009886] Initializing cgroup subsys cpuacct
> [ 0.010420] Initializing cgroup subsys memory
> [ 0.010935] Initializing cgroup subsys devices
> [ 0.011450] Initializing cgroup subsys freezer
> [ 0.012006] Initializing cgroup subsys net_cls
> [ 0.012517] Initializing cgroup subsys blkio
> [ 0.013021] Initializing cgroup subsys perf_event
> [ 0.013606] CPU: CPU feature xsave disabled, no CPUID level 0xd
> [ 0.014314] mce: CPU supports 10 MCE banks
> [ 0.015067] SMP alternatives: switching to UP code
> [ 0.031928] Freeing SMP alternatives: 24k freed
> [ 0.032017] ACPI: Core revision 20110413
> [ 0.033120] ftrace: allocating 26075 entries in 103 pages
> [ 0.040157] Enabling x2apic
> [ 0.040543] Enabled x2apic
> [ 0.041005] Switched APIC routing to physical x2apic.
> [ 0.042112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.042735] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
> [ 0.044002] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
> [ 0.044002] Brought up 1 CPUs
> [ 0.044002] Total of 1 processors activated (6784.56 BogoMIPS).
> [ 0.044002] devtmpfs: initialized
> [ 0.044758] print_constraints: dummy:
> [ 0.045261] Time: 13:23:57 Date: 02/18/13
> [ 0.045781] NET: Registered protocol family 16
> [ 0.046397] ACPI: bus type pci registered
> [ 0.046931] PCI: Using configuration type 1 for base access
> [ 0.047944] bio: create slab <bio-0> at 0
> [ 0.049221] ACPI: Interpreter enabled
> [ 0.049724] ACPI: (supports S0 S3 S4 S5)
> [ 0.050400] ACPI: Using IOAPIC for interrupt routing
> [ 0.053342] ACPI: No dock devices found.
> [ 0.053823] HEST: Table not found.
> [ 0.054309] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.055363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.057394] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
> [ 0.058290] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
> [ 0.070449] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
> [ 0.077527] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> [ 0.079626] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> [ 0.081053] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> [ 0.083131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> [ 0.085052] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
> [ 0.086160] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.087084] vgaarb: loaded
> [ 0.088006] vgaarb: bridge control possible 0000:00:02.0
> [ 0.088772] SCSI subsystem initialized
> [ 0.089402] usbcore: registered new interface driver usbfs
> [ 0.090049] usbcore: registered new interface driver hub
> [ 0.090671] usbcore: registered new device driver usb
> [ 0.091366] PCI: Using ACPI for IRQ routing
> [ 0.092226] NetLabel: Initializing
> [ 0.092659] NetLabel: domain hash size = 128
> [ 0.093166] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.093735] NetLabel: unlabeled traffic allowed by default
> [ 0.094424] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.095239] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.096008] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> [ 0.100104] Switching to clocksource kvm-clock
> [ 0.103381] Switched to NOHz mode on CPU #0
> [ 0.105479] AppArmor: AppArmor Filesystem Enabled
> [ 0.106028] pnp: PnP ACPI init
> [ 0.106426] ACPI: bus type pnp registered
> [ 0.107361] pnp: PnP ACPI: found 8 devices
> [ 0.107834] ACPI: ACPI bus type pnp unregistered
> [ 0.113757] NET: Registered protocol family 2
> [ 0.114308] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.115168] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.116126] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.116924] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.117635] TCP reno registered
> [ 0.118036] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.118658] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.119360] NET: Registered protocol family 1
> [ 0.119870] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [ 0.120514] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> [ 0.121133] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [ 0.122087] Trying to unpack rootfs image as initramfs...
> [ 0.128136] audit: initializing netlink socket (disabled)
> [ 0.128732] type=2000 audit(1361193838.124:1): initialized
> [ 0.156191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.160939] VFS: Disk quotas dquot_6.5.2
> [ 0.161482] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.167538] Freeing initrd memory: 2000k freed
> [ 0.168234] fuse init (API version 7.16)
> [ 0.168760] msgmni has been set to 976
> [ 0.172508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.173426] io scheduler noop registered
> [ 0.173901] io scheduler deadline registered (default)
> [ 0.174499] io scheduler cfq registered
> [ 0.175032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.175661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.176455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.177316] ACPI: Power Button [PWRF]
> [ 0.178304] ERST: Table is not found!
> [ 0.178861] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 0.179487] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
> [ 0.180578] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> [ 0.181201] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.182651] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [ 0.184109] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
> [ 0.186494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.209836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.231178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.252936] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.276078] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.276821] Linux agpgart interface v0.103
> [ 0.277915] brd: module loaded
> [ 0.278589] loop: module loaded
> [ 0.296757] vda: vda1
> [ 0.298843] scsi0 : ata_piix
> [ 0.299883] scsi1 : ata_piix
> [ 0.300868] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
> [ 0.302557] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
> [ 0.304569] Fixed MDIO Bus: probed
> [ 0.305629] PPP generic driver version 2.4.2
> [ 0.306840] tun: Universal TUN/TAP device driver, 1.6
> [ 0.308173] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com <mailto:maxk at qualcomm.com>>
> [ 0.384685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.386400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.387933] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.389589] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.391806] uhci_hcd 0000:00:01.2: UHCI Host Controller
> [ 0.393273] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> [ 0.395388] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
> [ 0.397118] hub 1-0:1.0: USB hub found
> [ 0.397792] hub 1-0:1.0: 2 ports detected
> [ 0.398326] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.399659] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.400272] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.400857] mousedev: PS/2 mouse device common for all mice
> [ 0.401539] rtc_cmos 00:01: RTC can wake from S4
> [ 0.402183] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 0.402875] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> [ 0.403594] device-mapper: uevent: version 1.0.3
> [ 0.404188] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:dm-devel at redhat.com <mailto:dm-devel at redhat.com>
> [ 0.405131] cpuidle: using governor ladder
> [ 0.405608] cpuidle: using governor menu
> [ 0.406083] EFI Variables Facility v0.08 2004-May-17
> [ 0.406733] TCP cubic registered
> [ 0.407238] NET: Registered protocol family 10
> [ 0.408067] NET: Registered protocol family 17
> [ 0.408585] Registering the dns_resolver key type
> [ 0.409217] registered taskstats version 1
> [ 0.409861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
> [ 0.413008] Magic number: 1:528:382
> [ 0.413527] rtc_cmos 00:01: setting system clock to 2013-02-18 13:23:57 UTC (1361193837)
> [ 0.414461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.415109] EDD information not available.
> [ 0.564916] Freeing unused kernel memory: 900k freed
> [ 0.566068] Write protecting the kernel read-only data: 12288k
> [ 0.574550] Freeing unused kernel memory: 1968k freed
> [ 0.579346] Freeing unused kernel memory: 1368k freed
>
> info: initramfs: up at 0.58
> NOCHANGE: partition 1 is size 64260. it cannot be grown
> info: initramfs loading root from /dev/vda1
> info: /etc/init.d/rc.sysinit: up at 0.75
> [ 0.754862] EXT3-fs (vda1): warning: checktime reached, running e2fsck is recommended
> Starting logging: OK
> Initializing random number generator... done.
> Starting network...
> udhcpc (v1.18.5) started
> Sending discover...
> Sending select for 10.5.5.5...
> Lease of 10.5.5.5 obtained, lease time 120
> deleting routers
> route: SIOCDELRT: No such process
> adding dns 8.8.8.8
> cloud-setup: checkinghttp://169.254.169.254/2009-04-04/meta-data/instance-id
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 1/30: up 0.85. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 2/30: up 191.17. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 3/30: up 381.64. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 4/30: up 572.10. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 5/30: up 762.57. request failed
> wget: can't connect to remote host (169.254.169.254): Connection timed out
> cloud-setup: failed 6/30: up 953.03. request failed
>
> Then again I created another compute node and spawned another VM on there and it wont hang and lets me log in. But does not get an ip. Its log is as follows.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.0.0-12-virtual (buildd at crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
> [ 0.000000] Command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> [ 0.000000] BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
> [ 0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
> [ 0.000000] RAMDISK: 1fdf9000 - 1ffed000
> [ 0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
> [ 0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
> [ 0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
> [ 0.000000] ACPI: FACS 000000001fffff40 00040
> [ 0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
> [ 0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
> [ 0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000001fffd000
> [ 0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
> [ 0.000000] NODE_DATA [000000001fff5000 - 000000001fff9fff]
> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [ 0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009d
> [ 0.000000] 0: 0x00000100 -> 0x0001fffd
> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deffc000)
> [ 0.000000] Booting paravirtualized kernel on KVM
> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296 r8192 d23104 u2097152
> [ 0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
> [ 0.000000] KVM setup async PF for cpu 0
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129157
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: LABEL=cirros-rootfs ro console=tty0 console=ttyS0 console=hvc0
> [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 497852k/524276k available (6206k kernel code, 460k absent, 25964k reserved, 6907k data, 900k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] allocated 4194304 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Detected 2388.000 MHz processor.
> [ 0.008000] Calibrating delay loop (skipped) preset value.. 4776.00 BogoMIPS (lpj=9552000)
> [ 0.008000] pid_max: default: 32768 minimum: 301
> [ 0.008060] Security Framework initialized
> [ 0.009366] AppArmor: AppArmor initialized
> [ 0.012006] Yama: becoming mindful.
> [ 0.013281] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.016066] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.018349] Mount-cache hash table entries: 256
> [ 0.020129] Initializing cgroup subsys cpuacct
> [ 0.021491] Initializing cgroup subsys memory
> [ 0.022851] Initializing cgroup subsys devices
> [ 0.024016] Initializing cgroup subsys freezer
> [ 0.025363] Initializing cgroup subsys net_cls
> [ 0.026715] Initializing cgroup subsys blkio
> [ 0.028030] Initializing cgroup subsys perf_event
> [ 0.029573] mce: CPU supports 10 MCE banks
> [ 0.031197] SMP alternatives: switching to UP code
> [ 0.147933] Freeing SMP alternatives: 24k freed
> [ 0.148079] ACPI: Core revision 20110413
> [ 0.150559] ftrace: allocating 26075 entries in 103 pages
> [ 0.157762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.159467] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
> [ 0.164009] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
> [ 0.164009] Brought up 1 CPUs
> [ 0.164014] Total of 1 processors activated (4776.00 BogoMIPS).
> [ 0.166755] devtmpfs: initialized
> [ 0.170360] print_constraints: dummy:
> [ 0.172104] Time: 13:24:44 Date: 02/18/13
> [ 0.173418] NET: Registered protocol family 16
> [ 0.174937] ACPI: bus type pci registered
> [ 0.176142] PCI: Using configuration type 1 for base access
> [ 0.178569] bio: create slab <bio-0> at 0
> [ 0.182563] ACPI: Interpreter enabled
> [ 0.184015] ACPI: (supports S0 S3 S4 S5)
> [ 0.185710] ACPI: Using IOAPIC for interrupt routing
> [ 0.191250] ACPI: No dock devices found.
> [ 0.192014] HEST: Table not found.
> [ 0.193107] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.196032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.201426] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
> [ 0.203612] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
> [ 0.222828] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
> [ 0.230916] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> [ 0.233519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> [ 0.236105] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> [ 0.238340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> [ 0.240838] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
> [ 0.243162] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.244018] vgaarb: loaded
> [ 0.244970] vgaarb: bridge control possible 0000:00:02.0
> [ 0.248376] SCSI subsystem initialized
> [ 0.249892] usbcore: registered new interface driver usbfs
> [ 0.251464] usbcore: registered new interface driver hub
> [ 0.252071] usbcore: registered new device driver usb
> [ 0.253742] PCI: Using ACPI for IRQ routing
> [ 0.256479] NetLabel: Initializing
> [ 0.257580] NetLabel: domain hash size = 128
> [ 0.258875] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.260035] NetLabel: unlabeled traffic allowed by default
> [ 0.261665] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.264019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.265888] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
> [ 0.272194] Switching to clocksource kvm-clock
> [ 0.274531] Switched to NOHz mode on CPU #0
> [ 0.285035] AppArmor: AppArmor Filesystem Enabled
> [ 0.286499] pnp: PnP ACPI init
> [ 0.287542] ACPI: bus type pnp registered
> [ 0.289770] pnp: PnP ACPI: found 8 devices
> [ 0.291018] ACPI: ACPI bus type pnp unregistered
> [ 0.298943] NET: Registered protocol family 2
> [ 0.300379] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.302578] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.305173] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.307360] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.309146] TCP reno registered
> [ 0.310196] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.311822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.313682] NET: Registered protocol family 1
> [ 0.315006] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [ 0.316674] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> [ 0.318307] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [ 0.320480] audit: initializing netlink socket (disabled)
> [ 0.322019] type=2000 audit(1361193885.316:1): initialized
> [ 0.344239] Trying to unpack rootfs image as initramfs...
> [ 0.358871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.365890] VFS: Disk quotas dquot_6.5.2
> [ 0.367186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.376084] fuse init (API version 7.16)
> [ 0.377439] msgmni has been set to 972
> [ 0.392139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.394429] io scheduler noop registered
> [ 0.395634] io scheduler deadline registered (default)
> [ 0.397194] io scheduler cfq registered
> [ 0.399476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.401085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.402998] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.405233] ACPI: Power Button [PWRF]
> [ 0.417377] ERST: Table is not found!
> [ 0.418791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 0.420438] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
> [ 0.432170] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> [ 0.433814] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.438359] Freeing initrd memory: 2000k freed
> [ 0.441355] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [ 0.443792] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
> [ 0.447889] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.472678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.496702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.521704] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.545496] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.547267] Linux agpgart interface v0.103
> [ 0.549897] brd: module loaded
> [ 0.551553] loop: module loaded
> [ 0.554797] vda: vda1
> [ 0.556875] scsi0 : ata_piix
> [ 0.558025] scsi1 : ata_piix
> [ 0.559060] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
> [ 0.560911] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
> [ 0.563676] Fixed MDIO Bus: probed
> [ 0.565407] PPP generic driver version 2.4.2
> [ 0.567404] tun: Universal TUN/TAP device driver, 1.6
> [ 0.569609] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com <mailto:maxk at qualcomm.com>>
> [ 0.606807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.609530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.612116] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.614760] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
> [ 0.618308] uhci_hcd 0000:00:01.2: UHCI Host Controller
> [ 0.619885] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> [ 0.622297] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
> [ 0.624142] hub 1-0:1.0: USB hub found
> [ 0.625358] hub 1-0:1.0: 2 ports detected
> [ 0.626777] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 0.630038] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.631498] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.633058] mousedev: PS/2 mouse device common for all mice
> [ 0.634804] rtc_cmos 00:01: RTC can wake from S4
> [ 0.636473] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 0.638306] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> [ 0.640167] device-mapper: uevent: version 1.0.3
> [ 0.641633] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:dm-devel at redhat.com <mailto:dm-devel at redhat.com>
> [ 0.644149] cpuidle: using governor ladder
> [ 0.645427] cpuidle: using governor menu
> [ 0.646682] EFI Variables Facility v0.08 2004-May-17
> [ 0.648412] TCP cubic registered
> [ 0.649633] NET: Registered protocol family 10
> [ 0.651585] NET: Registered protocol family 17
> [ 0.652979] Registering the dns_resolver key type
> [ 0.654619] registered taskstats version 1
> [ 0.656246] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
> [ 0.671472] Magic number: 1:81:433
> [ 0.672837] rtc_cmos 00:01: setting system clock to 2013-02-18 13:24:45 UTC (1361193885)
> [ 0.675260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.676968] EDD information not available.
> [ 0.814934] Freeing unused kernel memory: 900k freed
> [ 0.817578] Write protecting the kernel read-only data: 12288k
> [ 0.827394] Freeing unused kernel memory: 1968k freed
> [ 0.834295] Freeing unused kernel memory: 1368k freed
>
> info: initramfs: up at 0.85
> NOCHANGE: partition 1 is size 64260. it cannot be grown
> info: initramfs loading root from /dev/vda1
> info: /etc/init.d/rc.sysinit: up at 1.09
> [ 1.100339] EXT3-fs (vda1): warning: checktime reached, running e2fsck is recommended
> Starting logging: OK
> Initializing random number generator... done.
> Starting network...
> udhcpc (v1.18.5) started
> Sending discover...
> Sending discover...
> Sending discover...
> No lease, failing
> WARN: /etc/rc3.d/S40-network failed
> cloud-setup: checkinghttp://169.254.169.254/2009-04-04/meta-data/instance-id
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 1/30: up 10.43. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 2/30: up 11.45. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 3/30: up 12.47. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 4/30: up 13.48. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 5/30: up 14.49. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 6/30: up 15.51. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 7/30: up 16.52. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 8/30: up 17.54. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 9/30: up 18.55. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 10/30: up 19.57. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 11/30: up 20.58. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 12/30: up 21.60. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 13/30: up 22.61. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 14/30: up 23.62. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 15/30: up 24.64. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 16/30: up 25.65. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 17/30: up 26.66. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 18/30: up 27.68. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 19/30: up 28.69. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 20/30: up 29.71. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 21/30: up 30.72. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 22/30: up 31.73. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 23/30: up 32.75. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 24/30: up 33.76. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 25/30: up 34.77. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 26/30: up 35.78. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 27/30: up 36.82. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 28/30: up 37.83. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 29/30: up 38.85. request failed
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-setup: failed 30/30: up 39.86. request failed
> cloud-setup: after 30 fails, debugging
> cloud-setup: running debug (30 tries reached)
> ############ debug start ##############
> ### /etc/rc.d/init.d/sshd start
> /etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not found
> route: fscanf
> ### ifconfig -a
> eth0 Link encap:Ethernet HWaddr FA:16:3E:4B:FE:5F
> inet6 addr: fe80::f816:3eff:fe4b:fe5f/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:13 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:1706 (1.6 KiB) TX bytes:1224 (1.1 KiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> ### route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> route: fscanf
> ### cat /etc/resolv.conf
> cat: can't open '/etc/resolv.conf': No such file or directory
> ### gateway not found
> /etc/rc3.d/S45-cloud-setup: line 66: can't open /etc/resolv.conf: no such file
> ### pinging nameservers
> ### uname -a
> Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC 2011 x86_64 GNU/Linux
> ### lsmod
> Module Size Used by Not tainted
> vfat 17585 0
> fat 61475 1 vfat
> isofs 40253 0
> ip_tables 27473 0
> x_tables 29846 1 ip_tables
> pcnet32 42078 0
> 8139cp 27412 0
> ne2k_pci 13691 0
> 8390 18856 1 ne2k_pci
> e1000 108573 0
> acpiphp 24080 0
> ### dmesg | tail
> [ 1.214878] acpiphp: Slot [30] registered
> [ 1.214899] acpiphp: Slot [31] registered
> [ 1.228073] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [ 1.228076] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 1.236351] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> [ 1.242803] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 1.250444] pcnet32: pcnet32.c:v1.35 21.Apr.2008tsbogend at alpha.franken.de <mailto:tsbogend at alpha.franken.de>
> [ 1.260202] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.344253] Refined TSC clocksource calibration: 2387.967 MHz.
> [ 2.108346] eth0: IPv6 duplicate address fe80::f816:3eff:fe4b:fe5f detected!
> ### tail -n 25 /var/log/messages
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 0.948101] usb 1-1: new full speed USB device number 2 using uhci_hcd
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 0.971567] EXT3-fs: barriers not enabled
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 0.971818] kjournald starting. Commit interval 5 seconds
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 0.971836] EXT3-fs (vda1): mounted filesystem with ordered data mode
> Feb 18 06:24:46 cirros kern.warn kernel: [ 1.100339] EXT3-fs (vda1): warning: checktime reached, running e2fsck is recommended
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.103064] EXT3-fs (vda1): using internal journal
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.213929] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214172] acpiphp: Slot [1] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214207] acpiphp: Slot [2] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214228] acpiphp: Slot [3] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214249] acpiphp: Slot [4] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214289] acpiphp: Slot [5] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214312] acpiphp: Slot [6] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214335] acpiphp: Slot [7] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214358] acpiphp: Slot [8] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214380] acpiphp: Slot [9] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.214403] acpiphp: Slot [10] registered
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.228073] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.228076] e1000: Copyright (c) 1999-2006 Intel Corporation.
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.236351] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.242803] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.250444] pcnet32: pcnet32.c:v1.35 21.Apr.2008tsbogend at alpha.franken.de <mailto:tsbogend at alpha.franken.de>
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.260202] ip_tables: (C) 2000-2006 Netfilter Core Team
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 1.344253] Refined TSC clocksource calibration: 2387.967 MHz.
> Feb 18 06:24:46 cirroskern.info <http://kern.info> kernel: [ 2.108346] eth0: IPv6 duplicate address fe80::f816:3eff:fe4b:fe5f detected!
> ############ debug end ##############
> cloud-setup: failed to read iid from metadata. tried 30
> WARN: /etc/rc3.d/S45-cloud-setup failed
> Starting dropbear sshd: generating rsa key... generating dsa key... OK
> ===== cloud-final: system completely up in 41.37 seconds ====
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> instance-id:
> public-ipv4:
> local-ipv4 :
> wget: can't connect to remote host (169.254.169.254): Network is unreachable
> cloud-userdata: failed to read instance id
> WARN: /etc/rc3.d/S99-cloud-userdata failed
> ____ ____ ____
> / __/ __ ____ ____ / __ \/ __/
> / /__ / // __// __// /_/ /\ \
> \___//_//_/ /_/ \____/___/
> http://launchpad.net/cirros
>
>
>
> login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for root.
>
> cirros login:
>
> Additionally when I try to create more than 5 instances it throws the following exception.
>
>
>
>
>
> Error: Quota exceeded for instances: Requested 1, but already used 10 of 10 instances (HTTP 413) (Request-ID: req-09f00a85-900b-4f11-94fe-e7f8e4311032)
>
>
>
>
>
> Thanks.
>
>
>
>
>
>
> On 18 February 2013 13:30, Chathura M. Sarathchandra Magurawalage
> <77.chathura at gmail.com <mailto:77.chathura at gmail.com>> wrote:
>
> Yes definitely I will post it here for future reference for
> anybody.
>
> On 18 February 2013 13:28, Guilherme Russi
> <luisguilherme.cr at gmail.com
> <mailto:luisguilherme.cr at gmail.com>> wrote:
>
> Got it, I have one virtual interface too, to make the
> management and VM conf part. If you find anything, let me
> know, please.
>
> Thanks.
>
>
>
> 2013/2/18 Chathura M. Sarathchandra Magurawalage
> <77.chathura at gmail.com <mailto:77.chathura at gmail.com>>
>
> I have only got 1 NIC but got two virtual interface
> for two different networks. I have got network node in
> the same physical machine too.
>
>
> On 18 February 2013 13:15, Guilherme Russi
> <luisguilherme.cr at gmail.com
> <mailto:luisguilherme.cr at gmail.com>> wrote:
>
> How did you install your controller node? I mean,
> mine I have 2 NICs and I installed the network
> node at the same physical machine.
>
>
> 2013/2/18 Chathura M. Sarathchandra Magurawalage
> <77.chathura at gmail.com
> <mailto:77.chathura at gmail.com>>
>
> Hello Guilherme,
>
> No, I am still having the problem :(
>
>
> On 18 February 2013 13:01, Guilherme Russi
> <luisguilherme.cr at gmail.com
> <mailto:luisguilherme.cr at gmail.com>> wrote:
>
> Hello Chathura,
>
> Have succeeded with your network? I'm
> having problems with mine too.
>
> Thanks.
>
> Guilherme.
>
>
> 2013/2/17 Chathura M. Sarathchandra
> Magurawalage <77.chathura at gmail.com
> <mailto:77.chathura at gmail.com>>
>
> Hope you had a good night sleep :)
>
> Yes sure I will be on irc. my nickname
> is chathura77
>
> Thanks
>
> On 17 February 2013 13:15,
> Jean-Baptiste RANSY
> <jean-baptiste.ransy at alyseo.com
> <mailto:jean-baptiste.ransy at alyseo.com>>
> wrote:
>
> ping
>
> Are you on IRC ?
>
> JB
>
>
>
> On 02/17/2013 04:07 AM,
> Jean-Baptiste RANSY wrote:
>> Add Cirros Image to Glance :)
>>
>> Username: cirros
>> Password: cubswin:)
>>
>> http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html
>>
>> to join your VM, it's a bit dirty
>> but you can :
>> - put your computer in the same
>> subnet as your controller
>> (192.168.2.0/24
>> <http://192.168.2.0/24>)
>> - then adds a static route to the
>> subnet of your VM. (ip route add
>> 10.5.5.0/24 <http://10.5.5.0/24>
>> gw 192.168.2.151 <tel:192.168.2.151>)
>> (192.168.2.151
>> <tel:%28192.168.2.151> is the
>> quantum gateway)
>>
>> I'm going to sleep, we will
>> continue tomorrow.
>>
>> JB
>>
>> PS : You also should get some
>> sleep :)
>>
>>
>> On 02/17/2013 03:53 AM, Chathura
>> M. Sarathchandra Magurawalage wrote:
>>> oh that's weird.
>>>
>>> I still get this error. couldnt
>>> this be because I cannot ping
>>> the VM in the first place?.
>>> Because as far as I know
>>> metadata takes care of ssh keys.
>>> But what if you cant reach the
>>> VM in the first place?
>>>
>>> no instance data found in start-local
>>>
>>> ci-info: lo : 1 127.0.0.1 255.0.0.0 .
>>>
>>> ci-info: eth0 : 1 10.5.5.3 255.255.255.0 fa:16:3e:a7:28:25
>>>
>>> ci-info: route-0: 0.0.0.0 10.5.5.1 0.0.0.0 eth0 UG
>>>
>>> ci-info: route-1: 10.5.5.0 0.0.0.0 255.255.255.0 eth0 U
>>>
>>> cloud-init start running: Sun, 17 Feb 2013 02:45:35 +0000. up 3.51 seconds
>>>
>>> 2013-02-17 02:48:25,840 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/120s]: url error [timed out]
>>>
>>> 2013-02-17 02:49:16,893 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [101/120s]: url error [timed out]
>>>
>>> 2013-02-17 02:49:34,912 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [119/120s]: url error [timed out]
>>>
>>> 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving up on md after 120 seconds
>>>
>>>
>>>
>>> no instance data found in start
>>>
>>> Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
>>>
>>> * Starting AppArmor profiles [80G
>>> [74G[ OK ]
>>>
>>>
>>> On 17 February 2013 02:41,
>>> Jean-Baptiste RANSY
>>> <jean-baptiste.ransy at alyseo.com
>>> <mailto:jean-baptiste.ransy at alyseo.com>>
>>> wrote:
>>>
>>> For me, it's normal that you
>>> are not able to curl
>>> 169.254.169.254 from your
>>> compute and controller nodes
>>> : Same thing on my side, but
>>> my VM get their metadata.
>>>
>>> Try to lunch an instance.
>>>
>>> JB
>>>
>>>
>>>
>>> On 02/17/2013 03:35 AM,
>>> Chathura M. Sarathchandra
>>> Magurawalage wrote:
>>>> root at computernode:~# curl
>>>> -v http://169.254.169.254
>>>> * About to connect() to
>>>> 169.254.169.254 port 80 (#0)
>>>> * Trying 169.254.169.254...
>>>>
>>>> root at controller:~# curl -v
>>>> http://169.254.169.254
>>>> * About to connect() to
>>>> 169.254.169.254 port 80 (#0)
>>>> * Trying 169.254.169.254...
>>>>
>>>>
>>>> root at athena:~# iptables -L
>>>> -n -v
>>>> Chain INPUT (policy ACCEPT
>>>> 59009 packets, 22M bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 59493 22M
>>>> quantum-l3-agent-INPUT all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 59493 22M nova-api-INPUT
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 484 73533 ACCEPT 47
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain FORWARD (policy
>>>> ACCEPT 707 packets, 47819
>>>> bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 707 47819
>>>> quantum-filter-top all --
>>>> * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 707 47819
>>>> quantum-l3-agent-FORWARD
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 707 47819 nova-filter-top
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 707 47819
>>>> nova-api-FORWARD all --
>>>> * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain OUTPUT (policy ACCEPT
>>>> 56022 packets, 22M bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 56022 22M
>>>> quantum-filter-top all --
>>>> * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 56022 22M
>>>> quantum-l3-agent-OUTPUT
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 56022 22M nova-filter-top
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 56022 22M nova-api-OUTPUT
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain nova-api-FORWARD (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-INPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0 ACCEPT tcp -- *
>>>> * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 192.168.2.225
>>>> <tel:192.168.2.225>
>>>> tcp dpt:8775
>>>>
>>>> Chain nova-api-OUTPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-local (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-filter-top (2
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 56729 22M nova-api-local
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain quantum-filter-top (2
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 56729 22M
>>>> quantum-l3-agent-local all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain
>>>> quantum-l3-agent-FORWARD (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain
>>>> quantum-l3-agent-INPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0 ACCEPT tcp -- *
>>>> * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 192.168.2.225
>>>> <tel:192.168.2.225>
>>>> tcp dpt:8775
>>>>
>>>> Chain
>>>> quantum-l3-agent-OUTPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain
>>>> quantum-l3-agent-local (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> root at athena:~# iptables -L
>>>> -n -v -t nat
>>>> Chain PREROUTING (policy
>>>> ACCEPT 3212 packets, 347K
>>>> bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 3212 347K
>>>> quantum-l3-agent-PREROUTING
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 3212 347K
>>>> nova-api-PREROUTING all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain INPUT (policy ACCEPT
>>>> 639 packets, 84948 bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain OUTPUT (policy ACCEPT
>>>> 3180 packets, 213K bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 3180 213K
>>>> quantum-l3-agent-OUTPUT
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 3180 213K nova-api-OUTPUT
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain POSTROUTING (policy
>>>> ACCEPT 0 packets, 0 bytes)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 3726 247K
>>>> quantum-l3-agent-POSTROUTING all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 0 0
>>>> nova-api-POSTROUTING all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 0 0
>>>> quantum-postrouting-bottom
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 0 0
>>>> nova-postrouting-bottom
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain nova-api-OUTPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-POSTROUTING
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-PREROUTING
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-float-snat
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain nova-api-snat (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0 nova-api-float-snat
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain
>>>> nova-postrouting-bottom (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0 nova-api-snat all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> Chain
>>>> quantum-l3-agent-OUTPUT (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain
>>>> quantum-l3-agent-POSTROUTING (1
>>>> references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 3726 247K ACCEPT all
>>>> -- !qg-6f8374cb-cb
>>>> !qg-6f8374cb-cb 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> ! ctstate DNAT
>>>> 0 0 ACCEPT all -- *
>>>> * 10.5.5.0/24
>>>> <http://10.5.5.0/24>
>>>> 192.168.2.225
>>>> <tel:192.168.2.225>
>>>>
>>>> Chain
>>>> quantum-l3-agent-PREROUTING
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0 DNAT tcp -- * *
>>>> 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 169.254.169.254 tcp
>>>> dpt:80
>>>> to:192.168.2.225:8775
>>>> <http://192.168.2.225:8775>
>>>>
>>>> Chain
>>>> quantum-l3-agent-float-snat
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>>
>>>> Chain quantum-l3-agent-snat
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0
>>>> quantum-l3-agent-float-snat
>>>> all -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>> 0 0 SNAT all -- * *
>>>> 10.5.5.0/24
>>>> <http://10.5.5.0/24>
>>>> 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> to:192.168.2.151
>>>> <tel:192.168.2.151>
>>>>
>>>> Chain
>>>> quantum-postrouting-bottom
>>>> (1 references)
>>>> pkts bytes target prot
>>>> opt in out source
>>>> destination
>>>> 0 0
>>>> quantum-l3-agent-snat all
>>>> -- * * 0.0.0.0/0
>>>> <http://0.0.0.0/0>
>>>> 0.0.0.0/0 <http://0.0.0.0/0>
>>>>
>>>> thanks.
>>>>
>>>>
>>>> On 17 February 2013 02:25,
>>>> Jean-Baptiste RANSY
>>>> <jean-baptiste.ransy at alyseo.com
>>>> <mailto:jean-baptiste.ransy at alyseo.com>>
>>>> wrote:
>>>>
>>>> Controller node :
>>>> # iptables -L -n -v
>>>> # iptables -L -n -v -t nat
>>>>
>>>>
>>>>
>>>> On 02/17/2013 03:18 AM,
>>>> Chathura M.
>>>> Sarathchandra
>>>> Magurawalage wrote:
>>>>> You should be able
>>>>> to curl
>>>>> 169.254.169.254 from
>>>>> compute node, which I
>>>>> cant at the moment.
>>>>>
>>>>> I have got the bridge
>>>>> set up in the l3_agent.ini
>>>>
>>>>
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> Mailing list:https://launchpad.net/~openstack <https://launchpad.net/%7Eopenstack>
>> Post to :openstack at lists.launchpad.net <mailto:openstack at lists.launchpad.net>
>> Unsubscribe :https://launchpad.net/~openstack <https://launchpad.net/%7Eopenstack>
>> More help :https://help.launchpad.net/ListHelp
>
>
>
> _______________________________________________
> Mailing list:
> https://launchpad.net/~openstack
> <https://launchpad.net/%7Eopenstack>
> Post to :
> openstack at lists.launchpad.net
> <mailto:openstack at lists.launchpad.net>
> Unsubscribe :
> https://launchpad.net/~openstack
> <https://launchpad.net/%7Eopenstack>
> More help :
> https://help.launchpad.net/ListHelp
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to : openstack at lists.launchpad.net
> Unsubscribe : https://launchpad.net/~openstack
> More help : https://help.launchpad.net/ListHelp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130220/6a1d9965/attachment.html>
More information about the Openstack
mailing list