[Openstack] Cant ping private or floating IP

Chathura M. Sarathchandra Magurawalage 77.chathura at gmail.com
Mon Feb 18 14:37:09 UTC 2013


I have spawned a VM using cirros-0.3.0-x86_64 image, but it hangs on the
bootup. The log is as follows.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-12-virtual (buildd at crested) (gcc
version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct
7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
[    0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
console=ttyS0 console=hvc0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[    0.000000]  BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
[    0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[    0.000000] RAMDISK: 1fdf9000 - 1ffed000
[    0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS  BXPCRSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS  BXPCFACP
00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01   BXPC   BXDSDT
00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000001fffff40 00040
[    0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS  BXPCSSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS  BXPCAPIC
00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS  BXPCHPET
00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000001fffd000
[    0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
[    0.000000]   NODE_DATA [000000001fff5000 - 000000001fff9fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0001fffd
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:deffc000)
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296
r8192 d23104 u2097152
[    0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 129157
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: LABEL=cirros-rootfs ro
console=tty0 console=ttyS0 console=hvc0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 497852k/524276k available (6206k kernel code,
460k absent, 25964k reserved, 6907k data, 900k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[    0.000000] Detected 3392.282 MHz processor.
[    0.008000] Calibrating delay loop (skipped) preset value.. 6784.56
BogoMIPS (lpj=13569128)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] Security Framework initialized
[    0.008000] AppArmor: AppArmor initialized
[    0.008000] Yama: becoming mindful.
[    0.008000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.008311] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009201] Mount-cache hash table entries: 256
[    0.009886] Initializing cgroup subsys cpuacct
[    0.010420] Initializing cgroup subsys memory
[    0.010935] Initializing cgroup subsys devices
[    0.011450] Initializing cgroup subsys freezer
[    0.012006] Initializing cgroup subsys net_cls
[    0.012517] Initializing cgroup subsys blkio
[    0.013021] Initializing cgroup subsys perf_event
[    0.013606] CPU: CPU feature xsave disabled, no CPUID level 0xd
[    0.014314] mce: CPU supports 10 MCE banks
[    0.015067] SMP alternatives: switching to UP code
[    0.031928] Freeing SMP alternatives: 24k freed
[    0.032017] ACPI: Core revision 20110413
[    0.033120] ftrace: allocating 26075 entries in 103 pages
[    0.040157] Enabling x2apic
[    0.040543] Enabled x2apic
[    0.041005] Switched APIC routing to physical x2apic.
[    0.042112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042735] CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
[    0.044002] Performance Events: unsupported p6 CPU model 15 no PMU
driver, software events only.
[    0.044002] Brought up 1 CPUs
[    0.044002] Total of 1 processors activated (6784.56 BogoMIPS).
[    0.044002] devtmpfs: initialized
[    0.044758] print_constraints: dummy:
[    0.045261] Time: 13:23:57  Date: 02/18/13
[    0.045781] NET: Registered protocol family 16
[    0.046397] ACPI: bus type pci registered
[    0.046931] PCI: Using configuration type 1 for base access
[    0.047944] bio: create slab <bio-0> at 0
[    0.049221] ACPI: Interpreter enabled
[    0.049724] ACPI: (supports S0 S3 S4 S5)
[    0.050400] ACPI: Using IOAPIC for interrupt routing
[    0.053342] ACPI: No dock devices found.
[    0.053823] HEST: Table not found.
[    0.054309] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[    0.055363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.057394] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by
PIIX4 ACPI
[    0.058290] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.070449]  pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
[    0.077527] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.079626] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.081053] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.083131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.085052] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[    0.086160] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.087084] vgaarb: loaded
[    0.088006] vgaarb: bridge control possible 0000:00:02.0
[    0.088772] SCSI subsystem initialized
[    0.089402] usbcore: registered new interface driver usbfs
[    0.090049] usbcore: registered new interface driver hub
[    0.090671] usbcore: registered new device driver usb
[    0.091366] PCI: Using ACPI for IRQ routing
[    0.092226] NetLabel: Initializing
[    0.092659] NetLabel:  domain hash size = 128
[    0.093166] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.093735] NetLabel:  unlabeled traffic allowed by default
[    0.094424] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.095239] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.096008] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.100104] Switching to clocksource kvm-clock
[    0.103381] Switched to NOHz mode on CPU #0
[    0.105479] AppArmor: AppArmor Filesystem Enabled
[    0.106028] pnp: PnP ACPI init
[    0.106426] ACPI: bus type pnp registered
[    0.107361] pnp: PnP ACPI: found 8 devices
[    0.107834] ACPI: ACPI bus type pnp unregistered
[    0.113757] NET: Registered protocol family 2
[    0.114308] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.115168] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[    0.116126] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.116924] TCP: Hash tables configured (established 16384 bind 16384)
[    0.117635] TCP reno registered
[    0.118036] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.118658] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.119360] NET: Registered protocol family 1
[    0.119870] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.120514] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.121133] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.122087] Trying to unpack rootfs image as initramfs...
[    0.128136] audit: initializing netlink socket (disabled)
[    0.128732] type=2000 audit(1361193838.124:1): initialized
[    0.156191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.160939] VFS: Disk quotas dquot_6.5.2
[    0.161482] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.167538] Freeing initrd memory: 2000k freed
[    0.168234] fuse init (API version 7.16)
[    0.168760] msgmni has been set to 976
[    0.172508] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[    0.173426] io scheduler noop registered
[    0.173901] io scheduler deadline registered (default)
[    0.174499] io scheduler cfq registered
[    0.175032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.175661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.176455] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.177316] ACPI: Power Button [PWRF]
[    0.178304] ERST: Table is not found!
[    0.178861] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.179487] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
11 (level, high) -> IRQ 11
[    0.180578] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.181201] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.182651] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.184109] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
10 (level, high) -> IRQ 10
[    0.186494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.209836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.231178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.252936] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.276078] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.276821] Linux agpgart interface v0.103
[    0.277915] brd: module loaded
[    0.278589] loop: module loaded
[    0.296757]  vda: vda1
[    0.298843] scsi0 : ata_piix
[    0.299883] scsi1 : ata_piix
[    0.300868] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[    0.302557] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[    0.304569] Fixed MDIO Bus: probed
[    0.305629] PPP generic driver version 2.4.2
[    0.306840] tun: Universal TUN/TAP device driver, 1.6
[    0.308173] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.384685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.386400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.387933] uhci_hcd: USB Universal Host Controller Interface driver
[    0.389589] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.391806] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    0.393273] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[    0.395388] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
[    0.397118] hub 1-0:1.0: USB hub found
[    0.397792] hub 1-0:1.0: 2 ports detected
[    0.398326] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
at 0x60,0x64 irq 1,12
[    0.399659] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.400272] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.400857] mousedev: PS/2 mouse device common for all mice
[    0.401539] rtc_cmos 00:01: RTC can wake from S4
[    0.402183] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.402875] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.403594] device-mapper: uevent: version 1.0.3
[    0.404188] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel at redhat.com
[    0.405131] cpuidle: using governor ladder
[    0.405608] cpuidle: using governor menu
[    0.406083] EFI Variables Facility v0.08 2004-May-17
[    0.406733] TCP cubic registered
[    0.407238] NET: Registered protocol family 10
[    0.408067] NET: Registered protocol family 17
[    0.408585] Registering the dns_resolver key type
[    0.409217] registered taskstats version 1
[    0.409861] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[    0.413008]   Magic number: 1:528:382
[    0.413527] rtc_cmos 00:01: setting system clock to 2013-02-18
13:23:57 UTC (1361193837)
[    0.414461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.415109] EDD information not available.
[    0.564916] Freeing unused kernel memory: 900k freed
[    0.566068] Write protecting the kernel read-only data: 12288k
[    0.574550] Freeing unused kernel memory: 1968k freed
[    0.579346] Freeing unused kernel memory: 1368k freed

info: initramfs: up at 0.58
NOCHANGE: partition 1 is size 64260. it cannot be grown
info: initramfs loading root from /dev/vda1
info: /etc/init.d/rc.sysinit: up at 0.75
[    0.754862] EXT3-fs (vda1): warning: checktime reached, running
e2fsck is recommended
Starting logging: OK
Initializing random number generator... done.
Starting network...
udhcpc (v1.18.5) started
Sending discover...
Sending select for 10.5.5.5...
Lease of 10.5.5.5 obtained, lease time 120
deleting routers
route: SIOCDELRT: No such process
adding dns 8.8.8.8
cloud-setup: checking http://169.254.169.254/2009-04-04/meta-data/instance-id
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 1/30: up 0.85. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 2/30: up 191.17. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 3/30: up 381.64. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 4/30: up 572.10. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 5/30: up 762.57. request failed
wget: can't connect to remote host (169.254.169.254): Connection timed out
cloud-setup: failed 6/30: up 953.03. request failed



Then again I created another compute node and spawned another VM on
there and it wont hang and lets me log in. But does not get an ip. Its
log is as follows.


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-12-virtual (buildd at crested) (gcc
version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct
7 18:19:02 UTC 2011 (Ubuntu 3.0.0-12.20-virtual 3.0.4)
[    0.000000] Command line: LABEL=cirros-rootfs ro console=tty0
console=ttyS0 console=hvc0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
[    0.000000]  BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1fffd max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000fdaf0] fdaf0
[    0.000000] init_memory_mapping: 0000000000000000-000000001fffd000
[    0.000000] RAMDISK: 1fdf9000 - 1ffed000
[    0.000000] ACPI: RSDP 00000000000fd990 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000001fffd7b0 00034 (v01 BOCHS  BXPCRSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000001fffff80 00074 (v01 BOCHS  BXPCFACP
00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000001fffd9b0 02589 (v01   BXPC   BXDSDT
00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000001fffff40 00040
[    0.000000] ACPI: SSDT 000000001fffd910 0009E (v01 BOCHS  BXPCSSDT
00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000001fffd830 00072 (v01 BOCHS  BXPCAPIC
00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000001fffd7f0 00038 (v01 BOCHS  BXPCHPET
00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000001fffd000
[    0.000000] Initmem setup node 0 0000000000000000-000000001fffd000
[    0.000000]   NODE_DATA [000000001fff5000 - 000000001fff9fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ce28c1, boot clock
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0001fffd
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:deffc000)
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fa00000 s79296
r8192 d23104 u2097152
[    0.000000] kvm-clock: cpu 0, msr 0:1fa128c1, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 129157
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: LABEL=cirros-rootfs ro
console=tty0 console=ttyS0 console=hvc0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 497852k/524276k available (6206k kernel code,
460k absent, 25964k reserved, 6907k data, 900k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[    0.000000] Detected 2388.000 MHz processor.
[    0.008000] Calibrating delay loop (skipped) preset value.. 4776.00
BogoMIPS (lpj=9552000)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008060] Security Framework initialized
[    0.009366] AppArmor: AppArmor initialized
[    0.012006] Yama: becoming mindful.
[    0.013281] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.016066] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018349] Mount-cache hash table entries: 256
[    0.020129] Initializing cgroup subsys cpuacct
[    0.021491] Initializing cgroup subsys memory
[    0.022851] Initializing cgroup subsys devices
[    0.024016] Initializing cgroup subsys freezer
[    0.025363] Initializing cgroup subsys net_cls
[    0.026715] Initializing cgroup subsys blkio
[    0.028030] Initializing cgroup subsys perf_event
[    0.029573] mce: CPU supports 10 MCE banks
[    0.031197] SMP alternatives: switching to UP code
[    0.147933] Freeing SMP alternatives: 24k freed
[    0.148079] ACPI: Core revision 20110413
[    0.150559] ftrace: allocating 26075 entries in 103 pages
[    0.157762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159467] CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
[    0.164009] Performance Events: unsupported p6 CPU model 15 no PMU
driver, software events only.
[    0.164009] Brought up 1 CPUs
[    0.164014] Total of 1 processors activated (4776.00 BogoMIPS).
[    0.166755] devtmpfs: initialized
[    0.170360] print_constraints: dummy:
[    0.172104] Time: 13:24:44  Date: 02/18/13
[    0.173418] NET: Registered protocol family 16
[    0.174937] ACPI: bus type pci registered
[    0.176142] PCI: Using configuration type 1 for base access
[    0.178569] bio: create slab <bio-0> at 0
[    0.182563] ACPI: Interpreter enabled
[    0.184015] ACPI: (supports S0 S3 S4 S5)
[    0.185710] ACPI: Using IOAPIC for interrupt routing
[    0.191250] ACPI: No dock devices found.
[    0.192014] HEST: Table not found.
[    0.193107] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[    0.196032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.201426] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by
PIIX4 ACPI
[    0.203612] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.222828]  pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
[    0.230916] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.233519] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.236105] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.238340] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.240838] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[    0.243162] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.244018] vgaarb: loaded
[    0.244970] vgaarb: bridge control possible 0000:00:02.0
[    0.248376] SCSI subsystem initialized
[    0.249892] usbcore: registered new interface driver usbfs
[    0.251464] usbcore: registered new interface driver hub
[    0.252071] usbcore: registered new device driver usb
[    0.253742] PCI: Using ACPI for IRQ routing
[    0.256479] NetLabel: Initializing
[    0.257580] NetLabel:  domain hash size = 128
[    0.258875] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260035] NetLabel:  unlabeled traffic allowed by default
[    0.261665] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.264019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.265888] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.272194] Switching to clocksource kvm-clock
[    0.274531] Switched to NOHz mode on CPU #0
[    0.285035] AppArmor: AppArmor Filesystem Enabled
[    0.286499] pnp: PnP ACPI init
[    0.287542] ACPI: bus type pnp registered
[    0.289770] pnp: PnP ACPI: found 8 devices
[    0.291018] ACPI: ACPI bus type pnp unregistered
[    0.298943] NET: Registered protocol family 2
[    0.300379] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.302578] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[    0.305173] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.307360] TCP: Hash tables configured (established 16384 bind 16384)
[    0.309146] TCP reno registered
[    0.310196] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.311822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.313682] NET: Registered protocol family 1
[    0.315006] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.316674] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.318307] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.320480] audit: initializing netlink socket (disabled)
[    0.322019] type=2000 audit(1361193885.316:1): initialized
[    0.344239] Trying to unpack rootfs image as initramfs...
[    0.358871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.365890] VFS: Disk quotas dquot_6.5.2
[    0.367186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.376084] fuse init (API version 7.16)
[    0.377439] msgmni has been set to 972
[    0.392139] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[    0.394429] io scheduler noop registered
[    0.395634] io scheduler deadline registered (default)
[    0.397194] io scheduler cfq registered
[    0.399476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.401085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.402998] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.405233] ACPI: Power Button [PWRF]
[    0.417377] ERST: Table is not found!
[    0.418791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.420438] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
11 (level, high) -> IRQ 11
[    0.432170] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.433814] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.438359] Freeing initrd memory: 2000k freed
[    0.441355] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.443792] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
10 (level, high) -> IRQ 10
[    0.447889] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.472678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.496702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.521704] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.545496] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.547267] Linux agpgart interface v0.103
[    0.549897] brd: module loaded
[    0.551553] loop: module loaded
[    0.554797]  vda: vda1
[    0.556875] scsi0 : ata_piix
[    0.558025] scsi1 : ata_piix
[    0.559060] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[    0.560911] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[    0.563676] Fixed MDIO Bus: probed
[    0.565407] PPP generic driver version 2.4.2
[    0.567404] tun: Universal TUN/TAP device driver, 1.6
[    0.569609] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[    0.606807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.609530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.612116] uhci_hcd: USB Universal Host Controller Interface driver
[    0.614760] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
10 (level, high) -> IRQ 10
[    0.618308] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    0.619885] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[    0.622297] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c040
[    0.624142] hub 1-0:1.0: USB hub found
[    0.625358] hub 1-0:1.0: 2 ports detected
[    0.626777] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
at 0x60,0x64 irq 1,12
[    0.630038] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.631498] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.633058] mousedev: PS/2 mouse device common for all mice
[    0.634804] rtc_cmos 00:01: RTC can wake from S4
[    0.636473] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.638306] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.640167] device-mapper: uevent: version 1.0.3
[    0.641633] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel at redhat.com
[    0.644149] cpuidle: using governor ladder
[    0.645427] cpuidle: using governor menu
[    0.646682] EFI Variables Facility v0.08 2004-May-17
[    0.648412] TCP cubic registered
[    0.649633] NET: Registered protocol family 10
[    0.651585] NET: Registered protocol family 17
[    0.652979] Registering the dns_resolver key type
[    0.654619] registered taskstats version 1
[    0.656246] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[    0.671472]   Magic number: 1:81:433
[    0.672837] rtc_cmos 00:01: setting system clock to 2013-02-18
13:24:45 UTC (1361193885)
[    0.675260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.676968] EDD information not available.
[    0.814934] Freeing unused kernel memory: 900k freed
[    0.817578] Write protecting the kernel read-only data: 12288k
[    0.827394] Freeing unused kernel memory: 1968k freed
[    0.834295] Freeing unused kernel memory: 1368k freed

info: initramfs: up at 0.85
NOCHANGE: partition 1 is size 64260. it cannot be grown
info: initramfs loading root from /dev/vda1
info: /etc/init.d/rc.sysinit: up at 1.09
[    1.100339] EXT3-fs (vda1): warning: checktime reached, running
e2fsck is recommended
Starting logging: OK
Initializing random number generator... done.
Starting network...
udhcpc (v1.18.5) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
WARN: /etc/rc3.d/S40-network failed
cloud-setup: checking http://169.254.169.254/2009-04-04/meta-data/instance-id
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 1/30: up 10.43. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 2/30: up 11.45. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 3/30: up 12.47. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 4/30: up 13.48. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 5/30: up 14.49. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 6/30: up 15.51. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 7/30: up 16.52. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 8/30: up 17.54. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 9/30: up 18.55. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 10/30: up 19.57. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 11/30: up 20.58. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 12/30: up 21.60. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 13/30: up 22.61. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 14/30: up 23.62. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 15/30: up 24.64. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 16/30: up 25.65. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 17/30: up 26.66. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 18/30: up 27.68. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 19/30: up 28.69. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 20/30: up 29.71. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 21/30: up 30.72. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 22/30: up 31.73. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 23/30: up 32.75. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 24/30: up 33.76. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 25/30: up 34.77. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 26/30: up 35.78. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 27/30: up 36.82. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 28/30: up 37.83. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 29/30: up 38.85. request failed
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-setup: failed 30/30: up 39.86. request failed
cloud-setup: after 30 fails, debugging
cloud-setup: running debug (30 tries reached)
############ debug start ##############
### /etc/rc.d/init.d/sshd start
/etc/rc3.d/S45-cloud-setup: line 66: /etc/rc.d/init.d/sshd: not found
route: fscanf
### ifconfig -a
eth0      Link encap:Ethernet  HWaddr FA:16:3E:4B:FE:5F
          inet6 addr: fe80::f816:3eff:fe4b:fe5f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:13 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1706 (1.6 KiB)  TX bytes:1224 (1.1 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

### route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
route: fscanf
### cat /etc/resolv.conf
cat: can't open '/etc/resolv.conf': No such file or directory
### gateway not found
/etc/rc3.d/S45-cloud-setup: line 66: can't open /etc/resolv.conf: no such file
### pinging nameservers
### uname -a
Linux cirros 3.0.0-12-virtual #20-Ubuntu SMP Fri Oct 7 18:19:02 UTC
2011 x86_64 GNU/Linux
### lsmod
Module                  Size  Used by    Not tainted
vfat                   17585  0
fat                    61475  1 vfat
isofs                  40253  0
ip_tables              27473  0
x_tables               29846  1 ip_tables
pcnet32                42078  0
8139cp                 27412  0
ne2k_pci               13691  0
8390                   18856  1 ne2k_pci
e1000                 108573  0
acpiphp                24080  0
### dmesg | tail
[    1.214878] acpiphp: Slot [30] registered
[    1.214899] acpiphp: Slot [31] registered
[    1.228073] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.228076] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.236351] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[    1.242803] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.250444] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend at alpha.franken.de
[    1.260202] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.344253] Refined TSC clocksource calibration: 2387.967 MHz.
[    2.108346] eth0: IPv6 duplicate address fe80::f816:3eff:fe4b:fe5f detected!
### tail -n 25 /var/log/messages
Feb 18 06:24:46 cirros kern.info kernel: [    0.948101] usb 1-1: new
full speed USB device number 2 using uhci_hcd
Feb 18 06:24:46 cirros kern.info kernel: [    0.971567] EXT3-fs:
barriers not enabled
Feb 18 06:24:46 cirros kern.info kernel: [    0.971818] kjournald
starting.  Commit interval 5 seconds
Feb 18 06:24:46 cirros kern.info kernel: [    0.971836] EXT3-fs
(vda1): mounted filesystem with ordered data mode
Feb 18 06:24:46 cirros kern.warn kernel: [    1.100339] EXT3-fs
(vda1): warning: checktime reached, running e2fsck is recommended
Feb 18 06:24:46 cirros kern.info kernel: [    1.103064] EXT3-fs
(vda1): using internal journal
Feb 18 06:24:46 cirros kern.info kernel: [    1.213929] acpiphp: ACPI
Hot Plug PCI Controller Driver version: 0.5
Feb 18 06:24:46 cirros kern.info kernel: [    1.214172] acpiphp: Slot
[1] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214207] acpiphp: Slot
[2] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214228] acpiphp: Slot
[3] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214249] acpiphp: Slot
[4] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214289] acpiphp: Slot
[5] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214312] acpiphp: Slot
[6] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214335] acpiphp: Slot
[7] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214358] acpiphp: Slot
[8] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214380] acpiphp: Slot
[9] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.214403] acpiphp: Slot
[10] registered
Feb 18 06:24:46 cirros kern.info kernel: [    1.228073] e1000:
Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Feb 18 06:24:46 cirros kern.info kernel: [    1.228076] e1000:
Copyright (c) 1999-2006 Intel Corporation.
Feb 18 06:24:46 cirros kern.info kernel: [    1.236351]
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Feb 18 06:24:46 cirros kern.info kernel: [    1.242803] 8139cp:
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 18 06:24:46 cirros kern.info kernel: [    1.250444] pcnet32:
pcnet32.c:v1.35 21.Apr.2008 tsbogend at alpha.franken.de
Feb 18 06:24:46 cirros kern.info kernel: [    1.260202] ip_tables: (C)
2000-2006 Netfilter Core Team
Feb 18 06:24:46 cirros kern.info kernel: [    1.344253] Refined TSC
clocksource calibration: 2387.967 MHz.
Feb 18 06:24:46 cirros kern.info kernel: [    2.108346] eth0: IPv6
duplicate address fe80::f816:3eff:fe4b:fe5f detected!
############ debug end   ##############
cloud-setup: failed to read iid from metadata. tried 30
WARN: /etc/rc3.d/S45-cloud-setup failed
Starting dropbear sshd: generating rsa key... generating dsa key... OK
===== cloud-final: system completely up in 41.37 seconds ====
wget: can't connect to remote host (169.254.169.254): Network is unreachable
wget: can't connect to remote host (169.254.169.254): Network is unreachable
wget: can't connect to remote host (169.254.169.254): Network is unreachable
  instance-id:
  public-ipv4:
  local-ipv4 :
wget: can't connect to remote host (169.254.169.254): Network is unreachable
cloud-userdata: failed to read instance id
WARN: /etc/rc3.d/S99-cloud-userdata failed
  ____               ____  ____
 / __/ __ ____ ____ / __ \/ __/
/ /__ / // __// __// /_/ /\ \
\___//_//_/  /_/   \____/___/
 http://launchpad.net/cirros



login as 'cirros' user. default password: 'cubswin:)'. use 'sudo' for root.

cirros login:


Additionally when I try to create more than 5 instances it throws the
following exception.

Error: Quota exceeded for instances: Requested 1, but already used 10
of 10 instances (HTTP 413) (Request-ID:
req-09f00a85-900b-4f11-94fe-e7f8e4311032)


Thanks.



On 18 February 2013 13:30, Chathura M. Sarathchandra Magurawalage <
77.chathura at gmail.com> wrote:

> Yes definitely I will post it here for future reference for anybody.
>
> On 18 February 2013 13:28, Guilherme Russi <luisguilherme.cr at gmail.com>wrote:
>
>> Got it, I have one virtual interface too, to make the management and VM
>> conf part. If you find anything, let me know, please.
>>
>> Thanks.
>>
>>
>>
>> 2013/2/18 Chathura M. Sarathchandra Magurawalage <77.chathura at gmail.com>
>>
>>> I have only got 1 NIC but got two virtual interface for two different
>>> networks. I have got network node in the same physical machine too.
>>>
>>>
>>> On 18 February 2013 13:15, Guilherme Russi <luisguilherme.cr at gmail.com>wrote:
>>>
>>>> How did you install your controller node? I mean, mine I have 2 NICs
>>>> and I installed the network node at the same physical machine.
>>>>
>>>>
>>>> 2013/2/18 Chathura M. Sarathchandra Magurawalage <77.chathura at gmail.com
>>>> >
>>>>
>>>> Hello Guilherme,
>>>>>
>>>>> No, I am still having the problem :(
>>>>>
>>>>>
>>>>> On 18 February 2013 13:01, Guilherme Russi <luisguilherme.cr at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> Hello Chathura,
>>>>>>
>>>>>>  Have succeeded with your network? I'm having problems with mine too.
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>> Guilherme.
>>>>>>
>>>>>>
>>>>>> 2013/2/17 Chathura M. Sarathchandra Magurawalage <
>>>>>> 77.chathura at gmail.com>
>>>>>>
>>>>>> Hope you had a good night sleep :)
>>>>>>>
>>>>>>> Yes sure I will be on irc. my nickname is chathura77
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> On 17 February 2013 13:15, Jean-Baptiste RANSY <
>>>>>>> jean-baptiste.ransy at alyseo.com> wrote:
>>>>>>>
>>>>>>>>  ping
>>>>>>>>
>>>>>>>> Are you on IRC ?
>>>>>>>>
>>>>>>>> JB
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 02/17/2013 04:07 AM, Jean-Baptiste RANSY wrote:
>>>>>>>>
>>>>>>>> Add Cirros Image to Glance :)
>>>>>>>>
>>>>>>>> Username: cirros
>>>>>>>> Password: cubswin:)
>>>>>>>>
>>>>>>>>
>>>>>>>> http://docs.openstack.org/trunk/openstack-compute/install/apt/content/uploading-to-glance.html
>>>>>>>>
>>>>>>>> to join your VM, it's a bit dirty but you can :
>>>>>>>> - put your computer in the same subnet as your controller (
>>>>>>>> 192.168.2.0/24)
>>>>>>>> - then adds a static route to the subnet of your VM. (ip route add
>>>>>>>> 10.5.5.0/24 gw 192.168.2.151)
>>>>>>>> (192.168.2.151 is the quantum gateway)
>>>>>>>>
>>>>>>>> I'm going to sleep, we will continue tomorrow.
>>>>>>>>
>>>>>>>> JB
>>>>>>>>
>>>>>>>> PS : You also should get some sleep :)
>>>>>>>>
>>>>>>>>
>>>>>>>> On 02/17/2013 03:53 AM, Chathura M. Sarathchandra Magurawalage
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>  oh that's weird.
>>>>>>>>
>>>>>>>>  I still get this error. couldnt this be because I cannot ping the
>>>>>>>> VM in the first place?. Because as far as I know metadata takes care of ssh
>>>>>>>> keys. But what if you cant reach the VM in the first place?
>>>>>>>>
>>>>>>>>  no instance data found in start-local
>>>>>>>>
>>>>>>>> ci-info: lo    : 1 127.0.0.1       255.0.0.0       .
>>>>>>>>
>>>>>>>> ci-info: eth0  : 1 10.5.5.3        255.255.255.0   fa:16:3e:a7:28:25
>>>>>>>>
>>>>>>>> ci-info: route-0: 0.0.0.0         10.5.5.1        0.0.0.0         eth0   UG
>>>>>>>>
>>>>>>>> ci-info: route-1: 10.5.5.0        0.0.0.0         255.255.255.0   eth0   U
>>>>>>>>
>>>>>>>> cloud-init start running: Sun, 17 Feb 2013 02:45:35 +0000. up 3.51 seconds
>>>>>>>>
>>>>>>>> 2013-02-17 02:48:25,840 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/120s]: url error [timed out]
>>>>>>>>
>>>>>>>> 2013-02-17 02:49:16,893 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [101/120s]: url error [timed out]
>>>>>>>>
>>>>>>>> 2013-02-17 02:49:34,912 - util.py[WARNING]: 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [119/120s]: url error [timed out]
>>>>>>>>
>>>>>>>> 2013-02-17 02:49:35,913 - DataSourceEc2.py[CRITICAL]: giving up on md after 120 seconds
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> no instance data found in start
>>>>>>>>
>>>>>>>> Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
>>>>>>>>
>>>>>>>>  * Starting AppArmor profiles       [80G
>>>>>>>> [74G[ OK ]
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>  On 17 February 2013 02:41, Jean-Baptiste RANSY <
>>>>>>>> jean-baptiste.ransy at alyseo.com> wrote:
>>>>>>>>
>>>>>>>>>  For me, it's normal that you are not able to curl
>>>>>>>>> 169.254.169.254 from your compute and controller nodes : Same thing on my
>>>>>>>>> side, but my VM get their metadata.
>>>>>>>>>
>>>>>>>>> Try to lunch an instance.
>>>>>>>>>
>>>>>>>>> JB
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 02/17/2013 03:35 AM, Chathura M. Sarathchandra Magurawalage
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>  root at computernode:~# curl -v  http://169.254.169.254
>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
>>>>>>>>> *   Trying 169.254.169.254...
>>>>>>>>>
>>>>>>>>>  root at controller:~# curl -v  http://169.254.169.254
>>>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
>>>>>>>>> *   Trying 169.254.169.254...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  root at athena:~# iptables -L -n -v
>>>>>>>>> Chain INPUT (policy ACCEPT 59009 packets, 22M bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>> 59493   22M quantum-l3-agent-INPUT  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>> 59493   22M nova-api-INPUT  all  --  *      *       0.0.0.0/0
>>>>>>>>>        0.0.0.0/0
>>>>>>>>>   484 73533 ACCEPT     47   --  *      *       0.0.0.0/0
>>>>>>>>>    0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain FORWARD (policy ACCEPT 707 packets, 47819 bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>   707 47819 quantum-filter-top  all  --  *      *       0.0.0.0/0
>>>>>>>>> 0.0.0.0/0
>>>>>>>>>   707 47819 quantum-l3-agent-FORWARD  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>   707 47819 nova-filter-top  all  --  *      *       0.0.0.0/0
>>>>>>>>>          0.0.0.0/0
>>>>>>>>>   707 47819 nova-api-FORWARD  all  --  *      *       0.0.0.0/0
>>>>>>>>>          0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain OUTPUT (policy ACCEPT 56022 packets, 22M bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>> 56022   22M quantum-filter-top  all  --  *      *       0.0.0.0/0
>>>>>>>>> 0.0.0.0/0
>>>>>>>>> 56022   22M quantum-l3-agent-OUTPUT  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>> 56022   22M nova-filter-top  all  --  *      *       0.0.0.0/0
>>>>>>>>>          0.0.0.0/0
>>>>>>>>> 56022   22M nova-api-OUTPUT  all  --  *      *       0.0.0.0/0
>>>>>>>>>          0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain nova-api-FORWARD (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-INPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 ACCEPT     tcp  --  *      *       0.0.0.0/0
>>>>>>>>>    192.168.2.225        tcp dpt:8775
>>>>>>>>>
>>>>>>>>>  Chain nova-api-OUTPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-local (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-filter-top (2 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>> 56729   22M nova-api-local  all  --  *      *       0.0.0.0/0
>>>>>>>>>        0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain quantum-filter-top (2 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>> 56729   22M quantum-l3-agent-local  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-FORWARD (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-INPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 ACCEPT     tcp  --  *      *       0.0.0.0/0
>>>>>>>>>    192.168.2.225        tcp dpt:8775
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-OUTPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-local (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  root at athena:~# iptables -L -n -v -t nat
>>>>>>>>> Chain PREROUTING (policy ACCEPT 3212 packets, 347K bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>  3212  347K quantum-l3-agent-PREROUTING  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>  3212  347K nova-api-PREROUTING  all  --  *      *       0.0.0.0/0
>>>>>>>>> 0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain INPUT (policy ACCEPT 639 packets, 84948 bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain OUTPUT (policy ACCEPT 3180 packets, 213K bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>  3180  213K quantum-l3-agent-OUTPUT  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>  3180  213K nova-api-OUTPUT  all  --  *      *       0.0.0.0/0
>>>>>>>>>          0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>  3726  247K quantum-l3-agent-POSTROUTING  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>     0     0 nova-api-POSTROUTING  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>     0     0 quantum-postrouting-bottom  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>     0     0 nova-postrouting-bottom  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain nova-api-OUTPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-POSTROUTING (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-PREROUTING (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-float-snat (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain nova-api-snat (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 nova-api-float-snat  all  --  *      *       0.0.0.0/0
>>>>>>>>> 0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain nova-postrouting-bottom (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 nova-api-snat  all  --  *      *       0.0.0.0/0
>>>>>>>>>        0.0.0.0/0
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-OUTPUT (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-POSTROUTING (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>  3726  247K ACCEPT     all  --  !qg-6f8374cb-cb !qg-6f8374cb-cb
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0            ! ctstate DNAT
>>>>>>>>>     0     0 ACCEPT     all  --  *      *       10.5.5.0/24
>>>>>>>>>    192.168.2.225
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-PREROUTING (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 DNAT       tcp  --  *      *       0.0.0.0/0
>>>>>>>>>    169.254.169.254      tcp dpt:80 to:192.168.2.225:8775
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-float-snat (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>
>>>>>>>>>  Chain quantum-l3-agent-snat (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 quantum-l3-agent-float-snat  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>     0     0 SNAT       all  --  *      *       10.5.5.0/24
>>>>>>>>>    0.0.0.0/0            to:192.168.2.151
>>>>>>>>>
>>>>>>>>>  Chain quantum-postrouting-bottom (1 references)
>>>>>>>>>  pkts bytes target     prot opt in     out     source
>>>>>>>>>   destination
>>>>>>>>>     0     0 quantum-l3-agent-snat  all  --  *      *
>>>>>>>>> 0.0.0.0/0            0.0.0.0/0
>>>>>>>>>
>>>>>>>>> thanks.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  On 17 February 2013 02:25, Jean-Baptiste RANSY <
>>>>>>>>> jean-baptiste.ransy at alyseo.com> wrote:
>>>>>>>>>
>>>>>>>>>>  Controller node :
>>>>>>>>>> # iptables -L -n -v
>>>>>>>>>> # iptables -L -n -v -t nat
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 02/17/2013 03:18 AM, Chathura M. Sarathchandra Magurawalage
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> You should be able to curl 169.254.169.254 from compute node,
>>>>>>>>>> which I cant at the moment.
>>>>>>>>>>
>>>>>>>>>>  I have got the bridge set up in the l3_agent.ini
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Mailing list: https://launchpad.net/~openstack
>>>>>>>> Post to     : openstack at lists.launchpad.net
>>>>>>>> Unsubscribe : https://launchpad.net/~openstack
>>>>>>>> More help   : https://help.launchpad.net/ListHelp
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list: https://launchpad.net/~openstack
>>>>>>> Post to     : openstack at lists.launchpad.net
>>>>>>> Unsubscribe : https://launchpad.net/~openstack
>>>>>>> More help   : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130218/7817c17b/attachment.html>


More information about the Openstack mailing list