[Openstack] Cant ping private or floating IP

Chathura M. Sarathchandra Magurawalage 77.chathura at gmail.com
Sun Feb 17 01:47:39 UTC 2013


Do you mean br-ex interface and eth0.2? well the br-ex was created by
openstack and eth0.2 is the network that I get access to outside from.

Thanks.


On 17 February 2013 01:33, Jean-Baptiste RANSY <
jean-baptiste.ransy at alyseo.com> wrote:

>  You have two interfaces with the same ip address
>
> The problem must be here now.
>
> JB
>
>
>  *root at controller:~# ip addr show*
> 4: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UP
>     link/ether d4:ae:52:bb:aa:20 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.2.225/24 brd 192.168.2.255 scope global eth0.2
>     inet6 fe80::d6ae:52ff:febb:aa20/64 scope link
>        valid_lft forever preferred_lft forever
> 7: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
> UNKNOWN
>      link/ether 9a:41:c8:8a:9e:49 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.2.225/24 scope global br-ex
>
>
>
> On 02/17/2013 02:15 AM, Chathura M. Sarathchandra Magurawalage wrote:
>
> Hello JB,
>
>  I changed the IP and restarted the quantum-l3-agent but still no luck :(
>
>  Thanks.
>
>
> -----------------------------------------------------------------------------------------------------------------------------
> Chathura Madhusanka Sarathchandra Magurawalage.
> 1NW.2.1, Desk 2
> School of Computer Science and Electronic Engineering
> University Of Essex
>  United Kingdom.
>
>  Email: csarata at essex.ac.uk
>           chathura.sarathchandra at gmail.com <77.chathura at gmail.com>
>            77.chathura at gmail.com
>
>
> On 17 February 2013 00:47, Jean-Baptiste RANSY <
> jean-baptiste.ransy at alyseo.com> wrote:
>
>>  and restart quantum-l3-agent :)
>>
>> JB
>>
>>
>> On 02/17/2013 01:46 AM, Jean-Baptiste RANSY wrote:
>>
>> Found !
>>
>> On the controller node you must change the metadata_ip in
>> /etc/quantum/l3_agent.ini
>>
>> This params is used to create the nat rule quantum-l3-agent-PREROUTING
>>
>> Just replace 127.0.0.1 by 192.168.2.225 and that should be ok.
>>
>> JB
>>
>>
>> On 02/17/2013 01:04 AM, Jean-Baptiste RANSY wrote:
>>
>> Hi, Chathura
>>
>> The compute node log file /var/log/nova/nova-api.log is too light (maybe
>> logrotate :p)
>>
>> Please, clear nova-api.log, restart nova-api service, start a new
>> instance and wait cloud-init fail to retrieve metadata.
>>
>> Thx,
>>
>> JB
>>
>>
>> On 02/16/2013 11:35 PM, Chathura M. Sarathchandra Magurawalage wrote:
>>
>>  Thanks for that.
>> *
>> *
>> *root at controller:~# ip addr show*
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>> qlen 1000
>>     link/ether d4:ae:52:bb:aa:20 brd ff:ff:ff:ff:ff:ff
>>     inet 10.10.10.1/24 brd 10.10.10.255 scope global eth0
>>     inet6 fe80::d6ae:52ff:febb:aa20/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>>     link/ether d4:ae:52:bb:aa:21 brd ff:ff:ff:ff:ff:ff
>> 4: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
>> state UP
>>     link/ether d4:ae:52:bb:aa:20 brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.2.225/24 brd 192.168.2.255 scope global eth0.2
>>     inet6 fe80::d6ae:52ff:febb:aa20/64 scope link
>>        valid_lft forever preferred_lft forever
>> 5: br-int: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
>> UNKNOWN
>>     link/ether ba:7a:e9:dc:2b:41 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::b87a:e9ff:fedc:2b41/64 scope link
>>        valid_lft forever preferred_lft forever
>> 7: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
>> UNKNOWN
>>      link/ether 9a:41:c8:8a:9e:49 brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.2.225/24 scope global br-ex
>> 8: tapf71b5b86-5c: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UNKNOWN
>>     link/ether 2a:44:a3:d1:7d:f3 brd ff:ff:ff:ff:ff:ff
>>     inet 10.5.5.2/24 brd 10.5.5.255 scope global tapf71b5b86-5c
>>     inet6 fe80::2844:a3ff:fed1:7df3/64 scope link
>>        valid_lft forever preferred_lft forever
>> 9: qr-4d088f3a-78: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UNKNOWN
>>     link/ether ca:5b:8d:4d:6d:fb brd ff:ff:ff:ff:ff:ff
>>     inet 10.5.5.1/24 brd 10.5.5.255 scope global qr-4d088f3a-78
>>     inet6 fe80::c85b:8dff:fe4d:6dfb/64 scope link
>>        valid_lft forever preferred_lft forever
>> 10: qg-6f8374cb-cb: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UNKNOWN
>>     link/ether 0e:7f:dd:3a:80:bc brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.2.151/24 brd 192.168.2.255 scope global qg-6f8374cb-cb
>>     inet6 fe80::c7f:ddff:fe3a:80bc/64 scope link
>>        valid_lft forever preferred_lft forever
>> 27: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>     link/ether 8a:cf:ec:7c:15:40 brd ff:ff:ff:ff:ff:ff
>>
>>  *cat /proc/sys/net/ipv4/ip_forward*
>> 1
>>
>>  *root at computenode:~# ip addr show*
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>> qlen 1000
>>     link/ether d4:ae:52:bb:a1:9d brd ff:ff:ff:ff:ff:ff
>>     inet 10.10.10.12/24 brd 10.10.10.255 scope global eth0
>>     inet6 fe80::d6ae:52ff:febb:a19d/64 scope link
>>        valid_lft forever preferred_lft forever
>> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>>     link/ether d4:ae:52:bb:a1:9e brd ff:ff:ff:ff:ff:ff
>> 4: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
>> state UP
>>     link/ether d4:ae:52:bb:a1:9d brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.2.234/24 brd 192.168.2.255 scope global eth0.2
>>     inet6 fe80::d6ae:52ff:febb:a19d/64 scope link
>>        valid_lft forever preferred_lft forever
>> 5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>     link/ether ae:9b:43:09:af:40 brd ff:ff:ff:ff:ff:ff
>> 9: qbr256f5ed2-43: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> noqueue state UP
>>     link/ether c6:c0:df:64:c6:99 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::20e8:b9ff:fe6c:6f55/64 scope link
>>        valid_lft forever preferred_lft forever
>> 10: qvo256f5ed2-43: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
>> qdisc pfifo_fast state UP qlen 1000
>>     link/ether 76:25:8b:fd:90:3b brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::7425:8bff:fefd:903b/64 scope link
>>        valid_lft forever preferred_lft forever
>> 11: qvb256f5ed2-43: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
>> qdisc pfifo_fast master qbr256f5ed2-43 state UP qlen 1000
>>     link/ether c6:c0:df:64:c6:99 brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::c4c0:dfff:fe64:c699/64 scope link
>>        valid_lft forever preferred_lft forever
>> 13: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>     link/ether be:8c:30:78:35:48 brd ff:ff:ff:ff:ff:ff
>> 15: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> master qbr256f5ed2-43 state UNKNOWN qlen 500
>>     link/ether fe:16:3e:57:ec:ff brd ff:ff:ff:ff:ff:ff
>>     inet6 fe80::fc16:3eff:fe57:ecff/64 scope link
>>        valid_lft forever preferred_lft forever
>>
>>  btw cronus is my compute node and I have renamed it to computenode to
>> understand it better.
>>
>> On 16 February 2013 22:11, Jean-Baptiste RANSY <
>> jean-baptiste.ransy at alyseo.com> wrote:
>>
>>>  Download in progress
>>>
>>> Can you send me the output of those commands i forgot :
>>>
>>> Controller Node:
>>> $ ip addr show
>>> $ cat /proc/sys/net/ipv4/ip_forward
>>>
>>> Compute Node:
>>> $ ip addr show
>>>
>>>
>>> JB
>>>
>>>
>>>
>>> On 02/16/2013 10:45 PM, Chathura M. Sarathchandra Magurawalage wrote:
>>>
>>>  Thanks Ransy,
>>>
>>>  I have created a tar file with the configuration and log files in it.
>>> Please download it using the following URL. I have pasted the output of the
>>> commands below.
>>>
>>>  https://www.dropbox.com/s/qyfcsn50060y304/confilesnlogs.tar
>>>
>>>  *Controller node:*
>>> *root at controller:~# keystone endpoint-list*
>>> +----------------------------------+-----------+-------------------------------------------------+-------------------------------------------------+--------------------------------------------+Controller
>>> node
>>> |                id                |   region  |
>>>  publicurl                    |                   internalurl
>>>     |                  adminurl                  |
>>>
>>> +----------------------------------+-----------+-------------------------------------------------+-------------------------------------------------+--------------------------------------------+
>>> | 2c9a1cb0fe8247d9b7716432cf459fe5 | RegionOne |
>>> http://192.168.2.225:8774/v2/$(tenant_id)s   |
>>> http://192.168.2.225:8774/v2/$(tenant_id)s   |
>>> http://192.168.2.225:8774/v2/$(tenant_id)s |
>>> | 2d306903ed3342a8aaaac7c5680c116f | RegionOne |
>>> http://192.168.2.225:9696/           |
>>> http://192.168.2.225:9696/           |
>>> http://192.168.2.225:9696/         |
>>> | 3848114f120f42bf819bc2443b28ac9e | RegionOne |
>>> http://192.168.2.225:8080/v1/AUTH_$(tenant_id)s |
>>> http://192.168.2.225:8080/v1/AUTH_$(tenant_id)s |
>>> http://192.168.2.225:8080/v1        |
>>> | 4955173b8d9e4d33ae4a5b29dc12c74d | RegionOne |
>>> http://192.168.2.225:8776/v1/$(tenant_id)s   |
>>> http://192.168.2.225:8776/v1/$(tenant_id)s   |
>>> http://192.168.2.225:8776/v1/$(tenant_id)s |
>>> | d313aa76bf854dde94f33a49a9f0c8ac | RegionOne |
>>> http://192.168.2.225:9292/v2          |
>>> http://192.168.2.225:9292/v2          |
>>> http://192.168.2.225:9292/v2        |
>>> | e5aa4ecf3cbe4dd5aba9b204c74fee6a | RegionOne |
>>> http://192.168.2.225:5000/v2.0         |
>>> http://192.168.2.225:5000/v2.0         |
>>> http://192.168.2.225:35357/v2.0       |
>>> | fba6f790e3b444c890d114f13cd32b37 | RegionOne |
>>> http://192.168.2.225:8773/services/Cloud    |
>>> http://192.168.2.225:8773/services/Cloud    |
>>> http://192.168.2.225:8773/services/Admin  |
>>>
>>> +----------------------------------+-----------+-------------------------------------------------+-------------------------------------------------+--------------------------------------------+
>>>
>>>  *root at controller:~# ip link show*
>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>>> qlen 1000
>>>     link/ether d4:ae:52:bb:aa:20 brd ff:ff:ff:ff:ff:ff
>>> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>>>     link/ether d4:ae:52:bb:aa:21 brd ff:ff:ff:ff:ff:ff
>>>  4: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UP
>>>     link/ether d4:ae:52:bb:aa:20 brd ff:ff:ff:ff:ff:ff
>>> 5: br-int: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
>>> state UNKNOWN
>>>     link/ether ba:7a:e9:dc:2b:41 brd ff:ff:ff:ff:ff:ff
>>> 7: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
>>> UNKNOWN
>>>     link/ether 9a:41:c8:8a:9e:49 brd ff:ff:ff:ff:ff:ff
>>> 8: tapf71b5b86-5c: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UNKNOWN
>>>     link/ether 2a:44:a3:d1:7d:f3 brd ff:ff:ff:ff:ff:ff
>>> 9: qr-4d088f3a-78: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UNKNOWN
>>>     link/ether ca:5b:8d:4d:6d:fb brd ff:ff:ff:ff:ff:ff
>>> 10: qg-6f8374cb-cb: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UNKNOWN
>>>     link/ether 0e:7f:dd:3a:80:bc brd ff:ff:ff:ff:ff:ff
>>> 27: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>>     link/ether 8a:cf:ec:7c:15:40 brd ff:ff:ff:ff:ff:ff
>>>
>>>  *root at controller:~# ip route show*
>>> default via 192.168.2.253 dev eth0.2
>>> default via 192.168.2.253 dev eth0.2  metric 100
>>> 10.5.5.0/24 dev tapf71b5b86-5c  proto kernel  scope link  src 10.5.5.2
>>> 10.5.5.0/24 dev qr-4d088f3a-78  proto kernel  scope link  src 10.5.5.1
>>> 10.10.10.0/24 dev eth0  proto kernel  scope link  src 10.10.10.1
>>> 192.168.2.0/24 dev eth0.2  proto kernel  scope link  src 192.168.2.225
>>> 192.168.2.0/24 dev qg-6f8374cb-cb  proto kernel  scope link  src
>>> 192.168.2.151
>>> 192.168.2.0/24 dev br-ex  proto kernel  scope link  src 192.168.2.225
>>>
>>> *$ ip netns show (Did not return anything)*
>>>
>>>  *root at controller:~# ovs-vsctl show*
>>> a566afae-d7a8-42a9-aefe-8b0f2f7054a3
>>>     Bridge br-tun
>>>         Port "gre-4"
>>>             Interface "gre-4"
>>>                 type: gre
>>>                 options: {in_key=flow, out_key=flow,
>>> remote_ip="10.10.10.12"}
>>>         Port "gre-3"
>>>             Interface "gre-3"
>>>                  type: gre
>>>                 options: {in_key=flow, out_key=flow,
>>> remote_ip="127.0.0.1"}
>>>         Port patch-int
>>>             Interface patch-int
>>>                 type: patch
>>>                 options: {peer=patch-tun}
>>>         Port br-tun
>>>              Interface br-tun
>>>                 type: internal
>>>         Port "gre-1"
>>>             Interface "gre-1"
>>>                 type: gre
>>>                  options: {in_key=flow, out_key=flow,
>>> remote_ip="10.0.0.3"}
>>>     Bridge br-ex
>>>          Port br-ex
>>>             Interface br-ex
>>>                 type: internal
>>>         Port "qg-6f8374cb-cb"
>>>             Interface "qg-6f8374cb-cb"
>>>                 type: internal
>>>         Port "br0"
>>>              Interface "br0"
>>>     Bridge br-int
>>>         Port br-int
>>>             Interface br-int
>>>                 type: internal
>>>          Port "tapf71b5b86-5c"
>>>             tag: 1
>>>             Interface "tapf71b5b86-5c"
>>>                 type: internal
>>>         Port patch-tun
>>>             Interface patch-tun
>>>                 type: patch
>>>                 options: {peer=patch-int}
>>>          Port "qr-4d088f3a-78"
>>>             tag: 1
>>>             Interface "qr-4d088f3a-78"
>>>                 type: internal
>>>     ovs_version: "1.4.0+build0"
>>>
>>>
>>>  *Compute node:*
>>>
>>>  *root at cronus:~# ip link show*
>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>>>      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
>>> qlen 1000
>>>     link/ether d4:ae:52:bb:a1:9d brd ff:ff:ff:ff:ff:ff
>>> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>>>     link/ether d4:ae:52:bb:a1:9e brd ff:ff:ff:ff:ff:ff
>>> 4: eth0.2 at eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UP
>>>     link/ether d4:ae:52:bb:a1:9d brd ff:ff:ff:ff:ff:ff
>>> 5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>>     link/ether ae:9b:43:09:af:40 brd ff:ff:ff:ff:ff:ff
>>> 9: qbr256f5ed2-43: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>>> noqueue state UP
>>>     link/ether c6:c0:df:64:c6:99 brd ff:ff:ff:ff:ff:ff
>>> 10: qvo256f5ed2-43: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
>>> qdisc pfifo_fast state UP qlen 1000
>>>     link/ether 76:25:8b:fd:90:3b brd ff:ff:ff:ff:ff:ff
>>> 11: qvb256f5ed2-43: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500
>>> qdisc pfifo_fast master qbr256f5ed2-43 state UP qlen 1000
>>>     link/ether c6:c0:df:64:c6:99 brd ff:ff:ff:ff:ff:ff
>>> 13: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>>>     link/ether be:8c:30:78:35:48 brd ff:ff:ff:ff:ff:ff
>>> 15: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>>> master qbr256f5ed2-43 state UNKNOWN qlen 500
>>>     link/ether fe:16:3e:57:ec:ff brd ff:ff:ff:ff:ff:ff
>>>
>>>   *root at cronus:~# ip route show*
>>> default via 192.168.2.253 dev eth0.2  metric 100
>>> 10.10.10.0/24 dev eth0  proto kernel  scope link  src 10.10.10.12
>>> 192.168.2.0/24 dev eth0.2  proto kernel  scope link  src 192.168.2.234
>>>
>>>   *root at cronus:~# ovs-vsctl show*
>>> d85bc334-6d64-4a13-b851-d56b18ff1549
>>>     Bridge br-int
>>>         Port "qvo0e743b01-89"
>>>             tag: 4095
>>>             Interface "qvo0e743b01-89"
>>>         Port "qvo256f5ed2-43"
>>>             tag: 1
>>>             Interface "qvo256f5ed2-43"
>>>         Port patch-tun
>>>             Interface patch-tun
>>>                 type: patch
>>>                 options: {peer=patch-int}
>>>         Port br-int
>>>             Interface br-int
>>>                 type: internal
>>>         Port "qvoee3d4131-2a"
>>>             tag: 4095
>>>             Interface "qvoee3d4131-2a"
>>>         Port "qvocbc816bd-3d"
>>>             tag: 4095
>>>             Interface "qvocbc816bd-3d"
>>>     Bridge br-tun
>>>         Port br-tun
>>>             Interface br-tun
>>>                 type: internal
>>>         Port "gre-2"
>>>             Interface "gre-2"
>>>                 type: gre
>>>                 options: {in_key=flow, out_key=flow,
>>> remote_ip="10.10.10.1"}
>>>         Port "gre-1"
>>>             Interface "gre-1"
>>>                 type: gre
>>>                 options: {in_key=flow, out_key=flow,
>>> remote_ip="10.0.0.3"}
>>>         Port patch-int
>>>             Interface patch-int
>>>                 type: patch
>>>                 options: {peer=patch-tun}
>>>         Port "gre-3"
>>>             Interface "gre-3"
>>>                 type: gre
>>>                 options: {in_key=flow, out_key=flow,
>>> remote_ip="127.0.0.1"}
>>>     ovs_version: "1.4.0+build0"
>>>
>>>
>>>  Thanks I appreciate your help.
>>>
>>>   On 16 February 2013 16:49, Jean-Baptiste RANSY <
>>> jean-baptiste.ransy at alyseo.com> wrote:
>>>
>>>>  Please provide files listed bellow :
>>>>
>>>> Controller Node :
>>>> /etc/nova/nova.conf
>>>> /etc/nova/api-paste.ini
>>>> /etc/quantum/l3_agent.ini
>>>> /etc/quantum/quantum.conf
>>>> /etc/quantum/dhcp_agent.ini
>>>> /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini
>>>> /etc/quantum/api-paste.ini
>>>> /var/log/nova/*.log
>>>> /var/log/quantum/*.log
>>>>
>>>> Compute Node :
>>>> /etc/nova/nova.conf
>>>> /etc/nova/nova-compute.conf
>>>> /etc/nova/api-paste.ini
>>>> /etc/quantum/quantum.conf
>>>> /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini
>>>> /var/log/nova/*.log
>>>> /var/log/quantum/*.log
>>>>
>>>> Plus, complete output of the following commands :
>>>>
>>>> Controller Node :
>>>> $ keystone endpoint-list
>>>> $ ip link show
>>>> $ ip route show
>>>> $ ip netns show
>>>> $ ovs-vsctl show
>>>>
>>>> Compute Node :
>>>> $ ip link show
>>>> $ ip route show
>>>> $ ovs-vsctl show
>>>>
>>>> Regards,
>>>>
>>>> Jean-Baptiste RANSY
>>>>
>>>>
>>>>
>>>> On 02/16/2013 05:32 PM, Chathura M. Sarathchandra Magurawalage wrote:
>>>>
>>>> Hello Jean,
>>>>
>>>>  Thanks for your reply.
>>>>
>>>>  I followed the instructions in
>>>> http://docs.openstack.org/folsom/basic-install/content/basic-install_network.html.
>>>> And my Controller and the Network-node is installed in the same physical
>>>> node.
>>>>
>>>>  I am using Folsom but without Network namespaces.
>>>>
>>>>  But in the website you have provided it states that "If you run both
>>>> L3 + DHCP services on the same node, you should enable namespaces to avoid
>>>> conflicts with routes :"
>>>>
>>>>  But currently quantum-dhcp-agent and quantum-l3-agent are running in
>>>> the same node?
>>>>
>>>>  Additionally the control node serves as a DHCP server for the local
>>>> network ( Don't know if that would make and difference)
>>>>
>>>>  Any idea what the problem could be?
>>>>
>>>>
>>>> On 16 February 2013 16:21, Jean-Baptiste RANSY <
>>>> jean-baptiste.ransy at alyseo.com> wrote:
>>>>
>>>>>  Hello Chathura,
>>>>>
>>>>> Are you using Folsom with Network Namespaces ?
>>>>>
>>>>> If yes, have a look here :
>>>>> http://docs.openstack.org/folsom/openstack-network/admin/content/ch_limitations.html
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Jean-Baptsite RANSY
>>>>>
>>>>>
>>>>>
>>>>> On 02/16/2013 05:01 PM, Chathura M. Sarathchandra Magurawalage wrote:
>>>>>
>>>>>  Hello guys,
>>>>>
>>>>>  The problem still exists. Any ideas?
>>>>>
>>>>>  Thanks
>>>>>
>>>>>   On 15 February 2013 14:37, Sylvain Bauza <sylvain.bauza at digimind.com
>>>>> > wrote:
>>>>>
>>>>>> Metadata API allows to fetch SSH credentials when booting (pubkey I
>>>>>> mean).
>>>>>> If a VM is unable to reach metadata service, then it won't be able to
>>>>>> get its public key, so you won't be able to connect, unless you
>>>>>> specifically go thru a Password authentication (provided password auth is
>>>>>> enabled in /etc/ssh/sshd_config, which is not the case with Ubuntu cloud
>>>>>> archive).
>>>>>> There is also a side effect, the boot process is longer as the
>>>>>> instance is waiting for the curl timeout (60sec.) to finish booting up.
>>>>>>
>>>>>> Re: Quantum, the metadata API is actually DNAT'd from Network node to
>>>>>> the Nova-api node (here 172.16.0.1 as internal management IP) :
>>>>>> Chain quantum-l3-agent-PREROUTING (1 references)
>>>>>>
>>>>>> target     prot opt source               destination
>>>>>>  DNAT       tcp  --  0.0.0.0/0            169.254.169.254      tcp
>>>>>> dpt:80 to:172.16.0.1:8775
>>>>>>
>>>>>>
>>>>>> Anyway, the first step is to :
>>>>>> 1. grab the console.log
>>>>>> 2. access thru VNC to the desired instance
>>>>>>
>>>>>> Troubleshooting will be easier once that done.
>>>>>>
>>>>>> -Sylvain
>>>>>>
>>>>>>
>>>>>>
>>>>>> Le 15/02/2013 14:24, Chathura M. Sarathchandra Magurawalage a écrit :
>>>>>>
>>>>>>>  Hello Guys,
>>>>>>>
>>>>>>> Not sure if this is the right port but these are the results:
>>>>>>>
>>>>>>>  *Compute node:*
>>>>>>>
>>>>>>>
>>>>>>> root at computenode:~# netstat -an | grep 8775
>>>>>>>  tcp        0      0 0.0.0.0:8775 <http://0.0.0.0:8775>  0.0.0.0:*
>>>>>>>               LISTEN
>>>>>>>
>>>>>>> *Controller: *
>>>>>>>
>>>>>>>
>>>>>>> root at controller:~# netstat -an | grep 8775
>>>>>>>  tcp        0      0 0.0.0.0:8775 <http://0.0.0.0:8775>  0.0.0.0:*
>>>>>>>               LISTEN
>>>>>>>
>>>>>>> *Additionally I cant curl 169.254.169.254 from the compute node. I
>>>>>>> am not sure if this is related to not being able to PING the VM.*
>>>>>>>
>>>>>>>
>>>>>>> curl -v http://169.254.169.254
>>>>>>> * About to connect() to 169.254.169.254 port 80 (#0)
>>>>>>> *   Trying 169.254.169.254...
>>>>>>>
>>>>>>> Thanks for your help
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> -----------------------------------------------------------------------------------------------------------------------------
>>>>>>> Chathura Madhusanka Sarathchandra Magurawalage.
>>>>>>> 1NW.2.1, Desk 2
>>>>>>> School of Computer Science and Electronic Engineering
>>>>>>> University Of Essex
>>>>>>> United Kingdom.
>>>>>>>
>>>>>>>  Email: csarata at essex.ac.uk <mailto:csarata at essex.ac.uk>
>>>>>>>           chathura.sarathchandra at gmail.com <mailto:
>>>>>>> 77.chathura at gmail.com>
>>>>>>> 77.chathura at gmail.com <mailto:77.chathura at gmail.com>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 15 February 2013 11:03, Anil Vishnoi <vishnoianil at gmail.com<mailto:
>>>>>>> vishnoianil at gmail.com>> wrote:
>>>>>>>
>>>>>>>     If you are using ubuntu cloud image then the only way to log-in
>>>>>>> is
>>>>>>>     to do ssh with the public key. For that you have to create ssh
>>>>>>> key
>>>>>>>     pair and download the ssh key. You can create this ssh pair using
>>>>>>>     horizon/cli.
>>>>>>>
>>>>>>>
>>>>>>>     On Fri, Feb 15, 2013 at 4:27 PM, Sylvain Bauza
>>>>>>>      <sylvain.bauza at digimind.com <mailto:sylvain.bauza at digimind.com>>
>>>>>>>
>>>>>>>
>>>>>>>     wrote:
>>>>>>>
>>>>>>>
>>>>>>>         Le 15/02/2013 11:42, Chathura M. Sarathchandra Magurawalage a
>>>>>>>         écrit :
>>>>>>>
>>>>>>>
>>>>>>>             How can I log into the VM from VNC? What are the
>>>>>>> credentials?
>>>>>>>
>>>>>>>
>>>>>>>         You have multiple ways to get VNC access. The easiest one is
>>>>>>>         thru Horizon. Other can be looking at the KVM command-line
>>>>>>> for
>>>>>>>         the desired instance (on the compute node) and check the vnc
>>>>>>>         port in use (assuming KVM as hypervisor).
>>>>>>>         This is basic knowledge of Nova.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>             nova-api-metadata is running fine in the compute node.
>>>>>>>
>>>>>>>
>>>>>>>         Make sure the metadata port is avaible thanks to telnet or
>>>>>>>         netstat, nova-api can be running without listening on
>>>>>>> metadata
>>>>>>>         port.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>         _______________________________________________
>>>>>>>         Mailing list: https://launchpad.net/~openstack
>>>>>>>          <https://launchpad.net/%7Eopenstack>
>>>>>>>         Post to     : openstack at lists.launchpad.net
>>>>>>>         <mailto:openstack at lists.launchpad.net>
>>>>>>>         Unsubscribe : https://launchpad.net/~openstack
>>>>>>>         <https://launchpad.net/%7Eopenstack>
>>>>>>>
>>>>>>>         More help   : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>     --     Thanks & Regards
>>>>>>>     --Anil Kumar Vishnoi
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>  _______________________________________________
>>>>> Mailing list: https://launchpad.net/~openstack
>>>>>
>>>>> Post to     : openstack at lists.launchpad.net
>>>>> Unsubscribe : https://launchpad.net/~openstack
>>>>> More help   : https://help.launchpad.net/ListHelp
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130217/648e2933/attachment.html>


More information about the Openstack mailing list