[Openstack] Quantum subnet floatingip-create problem.
Chathura M. Sarathchandra Magurawalage
77.chathura at gmail.com
Sat Feb 9 18:29:30 UTC 2013
Hello,
I followed the folsom basic install instructions in
http://docs.openstack.org/folsom/basic-install/content/basic-install_operate.html
Now it fails to create a VM successfully.
I get the following error when I run the command:
quantum floatingip-create --port_id b8b3fe12-9644-455f-8a29-0e19c6573cee
95d35cd4-4c61-4fa7-855c-9de41424106d
Unable to find network with name '95d35cd4-4c61-4fa7-855c-9de41424106d'
External network 26b88521-5d1e-4f40-a4f5-74f8a8136335 is not reachable from
subnet 95d35cd4-4c61-4fa7-855c-9de41424106d. Therefore, cannot associate
Port b8b3fe12-9644-455f-8a29-0e19c6573cee with a Floating IP.
And when I look at the log of the instance I see,
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-37-virtual (buildd at allspice) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #58-Ubuntu SMP Thu Jan
24 15:48:03 UTC 2013 (Ubuntu 3.2.0-37.58-virtual 3.2.35)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-37-virtual
root=LABEL=cloudimg-rootfs ro console=ttyS0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fffd000 (usable)
[ 0.000000] BIOS-e820: 000000007fffd000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fffd max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fdae0] fdae0
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fffd000
[ 0.000000] RAMDISK: 3776c000 - 37bae000
[ 0.000000] ACPI: RSDP 00000000000fd980 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000007fffd7b0 00034 (v01 BOCHS BXPCRSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP
00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000007fffd9b0 02589 (v01 BXPC BXDSDT
00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000007fffff40 00040
[ 0.000000] ACPI: SSDT 000000007fffd910 0009E (v01 BOCHS BXPCSSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000007fffd830 00072 (v01 BOCHS BXPCAPIC
00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000007fffd7f0 00038 (v01 BOCHS BXPCHPET
00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fffd000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fffd000
[ 0.000000] NODE_DATA [000000007fff8000 - 000000007fffcfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1cf7681, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007fffd
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:7effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82880
r8192 d23616 u2097152
[ 0.000000] kvm-clock: cpu 0, msr 0:7fc13681, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 7fc0dd40
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 515971
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-37-virtual root=LABEL=cloudimg-rootfs
ro console=ttyS0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 2043632k/2097140k available (6541k kernel code,
468k absent, 53040k reserved, 6652k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Detected 3392.282 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 6784.56
BogoMIPS (lpj=13569128)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008552] Mount-cache hash table entries: 256
[ 0.009069] Initializing cgroup subsys cpuacct
[ 0.009415] Initializing cgroup subsys memory
[ 0.009736] Initializing cgroup subsys devices
[ 0.010074] Initializing cgroup subsys freezer
[ 0.010404] Initializing cgroup subsys blkio
[ 0.010727] Initializing cgroup subsys perf_event
[ 0.011132] CPU: CPU feature xsave disabled, no CPUID level 0xd
[ 0.012012] mce: CPU supports 10 MCE banks
[ 0.012815] SMP alternatives: switching to UP code
[ 0.030072] Freeing SMP alternatives: 24k freed
[ 0.030476] ACPI: Core revision 20110623
[ 0.031410] ftrace: allocating 27027 entries in 106 pages
[ 0.036214] Enabling x2apic
[ 0.036447] Enabled x2apic
[ 0.036762] Switched APIC routing to physical x2apic.
[ 0.037807] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040004] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
[ 0.044002] Performance Events: unsupported p6 CPU model 15 no PMU
driver, software events only.
[ 0.044002] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.044002] Brought up 1 CPUs
[ 0.044002] Total of 1 processors activated (6784.56 BogoMIPS).
[ 0.044002] devtmpfs: initialized
[ 0.044002] EVM: security.selinux
[ 0.044002] EVM: security.SMACK64
[ 0.044002] EVM: security.capability
[ 0.044444] print_constraints: dummy:
[ 0.044769] RTC time: 14:58:00, date: 02/09/13
[ 0.045125] NET: Registered protocol family 16
[ 0.045594] ACPI: bus type pci registered
[ 0.045963] PCI: Using configuration type 1 for base access
[ 0.046858] bio: create slab <bio-0> at 0
[ 0.047231] ACPI: Added _OSI(Module Device)
[ 0.047544] ACPI: Added _OSI(Processor Device)
[ 0.047869] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.048005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.049562] ACPI: Interpreter enabled
[ 0.049839] ACPI: (supports S0 S3 S4 S5)
[ 0.050177] ACPI: Using IOAPIC for interrupt routing
[ 0.052713] ACPI: No dock devices found.
[ 0.053014] HEST: Table not found.
[ 0.053266] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.054011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.055918] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by
PIIX4 ACPI
[ 0.056011] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.072712] pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
[ 0.079186] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.080348] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.081528] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.082008] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.082488] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.083087] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.083656] vgaarb: loaded
[ 0.083851] vgaarb: bridge control possible 0000:00:02.0
[ 0.084091] i2c-core: driver [aat2870] using legacy suspend method
[ 0.084530] i2c-core: driver [aat2870] using legacy resume method
[ 0.085028] SCSI subsystem initialized
[ 0.085494] usbcore: registered new interface driver usbfs
[ 0.085891] usbcore: registered new interface driver hub
[ 0.086302] usbcore: registered new device driver usb
[ 0.086745] PCI: Using ACPI for IRQ routing
[ 0.087264] NetLabel: Initializing
[ 0.087514] NetLabel: domain hash size = 128
[ 0.088006] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.088368] NetLabel: unlabeled traffic allowed by default
[ 0.088802] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.089305] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.089734] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.096073] Switching to clocksource kvm-clock
[ 0.102310] AppArmor: AppArmor Filesystem Enabled
[ 0.102734] pnp: PnP ACPI init
[ 0.103009] ACPI: bus type pnp registered
[ 0.103906] pnp: PnP ACPI: found 8 devices
[ 0.104257] ACPI: ACPI bus type pnp unregistered
[ 0.110395] NET: Registered protocol family 2
[ 0.110770] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.111731] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.114007] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.114889] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.115352] TCP reno registered
[ 0.115584] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.116027] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.116533] NET: Registered protocol family 1
[ 0.116856] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.117339] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.117752] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.118272] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.118687] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11
(level, high) -> IRQ 11
[ 0.119282] pci 0000:00:01.2: PCI INT D disabled
[ 0.119885] Trying to unpack rootfs image as initramfs...
[ 0.124217] audit: initializing netlink socket (disabled)
[ 0.124615] type=2000 audit(1360421881.120:1): initialized
[ 0.160139] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.161760] VFS: Disk quotas dquot_6.5.2
[ 0.162078] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.162847] fuse init (API version 7.17)
[ 0.163194] msgmni has been set to 3991
[ 0.180064] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.184084] io scheduler noop registered
[ 0.184379] io scheduler deadline registered (default)
[ 0.184777] io scheduler cfq registered
[ 0.185154] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.185577] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.186139] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.186685] ACPI: Power Button [PWRF]
[ 0.187458] ERST: Table is not found!
[ 0.187734] GHES: HEST is not enabled!
[ 0.188139] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.188579] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI
10 (level, high) -> IRQ 10
[ 0.189330] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI
11 (level, high) -> IRQ 11
[ 0.190396] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.190834] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI
10 (level, high) -> IRQ 10
[ 0.191967] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.193017] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI
11 (level, high) -> IRQ 11
[ 0.200309] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.222029] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.239019] Freeing initrd memory: 4360k freed
[ 0.260487] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.282314] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.303538] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.304110] Linux agpgart interface v0.103
[ 0.305204] brd: module loaded
[ 0.305841] loop: module loaded
[ 0.330819] vda: vda1
[ 0.334238] vdb: unknown partition table
[ 0.335218] scsi0 : ata_piix
[ 0.335488] scsi1 : ata_piix
[ 0.335730] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[ 0.336240] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[ 0.336917] Fixed MDIO Bus: probed
[ 0.337388] tun: Universal TUN/TAP device driver, 1.6
[ 0.338239] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.409945] PPP generic driver version 2.4.2
[ 0.411312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.412509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.413632] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.414775] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI
11 (level, high) -> IRQ 11
[ 0.416303] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.417215] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[ 0.417825] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[ 0.418378] hub 1-0:1.0: USB hub found
[ 0.418698] hub 1-0:1.0: 2 ports detected
[ 0.419077] usbcore: registered new interface driver libusual
[ 0.419532] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
at 0x60,0x64 irq 1,12
[ 0.420599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.420968] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.421433] mousedev: PS/2 mouse device common for all mice
[ 0.422027] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.422853] rtc_cmos 00:01: RTC can wake from S4
[ 0.423305] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.423826] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.424358] device-mapper: uevent: version 1.0.3
[ 0.424777] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel at redhat.com
[ 0.425418] cpuidle: using governor ladder
[ 0.425740] cpuidle: using governor menu
[ 0.426030] EFI Variables Facility v0.08 2004-May-17
[ 0.426572] TCP cubic registered
[ 0.426883] NET: Registered protocol family 10
[ 0.427549] NET: Registered protocol family 17
[ 0.427897] Registering the dns_resolver key type
[ 0.428353] registered taskstats version 1
[ 0.431786] Magic number: 1:577:990
[ 0.432139] rtc_cmos 00:01: setting system clock to 2013-02-09
14:58:00 UTC (1360421880)
[ 0.432780] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.433227] EDD information not available.
[ 0.564912] Freeing unused kernel memory: 924k freed
[ 0.566205] Write protecting the kernel read-only data: 12288k
[ 0.573219] Freeing unused kernel memory: 1632k freed
[ 0.575912] Freeing unused kernel memory: 1200k freed
Loading, please wait...
Begin: Loading essential drivers ... done.
[ 0.587092] udevd[83]: starting version 175
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ 0.692255] FDC 0 is a S82078B
[ 0.728031] usb 1-1: new full-speed USB device number 2 using uhci_hcd
Begin: Running /scripts/local-premount ... [ 1.116065] Refined TSC
clocksource calibration: 3392.134 MHz.
done.
[ 1.282177] EXT4-fs (vda1): mounted filesystem with ordered data
mode. Opts: (null)
Begin: Running /scripts/local-bottom ... [ 1.691661] vda: vda1
GROWROOT: CHANGED: partition=1 start=16065 old: size=4176900
end=4192965 new: size=20948760,end=20964825
[ 1.785653] EXT4-fs (vda1): mounted filesystem with ordered data
mode. Opts: (null)
done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 4.827210] EXT4-fs (vda1): re-mounted. Opts: (null)
cloud-init start-local running: Sat, 09 Feb 2013 14:58:18 +0000. up
18.36 seconds
no instance data found in start-local
cloud-init-nonet waiting 120 seconds for a network device.
unable to connect to system bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
Terminated
* Asking all remaining processes to terminate... [80G
[74G[ OK ]
* All processes ended within 1 seconds.... [80G
[74G[ OK ]
* Deconfiguring network interfaces... [80G
[74G[ OK ]
* Deactivating swap... [80G
[74G[ OK ]
ci-info: lo : 1 127.0.0.1 255.0.0.0 .
ci-info: eth0 : 1 . . fa:16:3e:b8:91:44
route_info failed
cloud-init start running: Sat, 09 Feb 2013 14:59:15 +0000. up 75.46 seconds
2013-02-09 14:59:15,727 - util.py[WARNING]:
'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed
[0/120s]: url error [[Errno 101] Network is unreachable]
mount: / is busy
#then I restarted the VM
* Will now restart
.........
[ 1.671026] EXT4-fs (vda1): re-mounted. Opts: (null)
cloud-init start-local running: Sat, 09 Feb 2013 14:59:23 +0000. up 2.85 seconds
no instance data found in start-local
cloud-init-nonet waiting 120 seconds for a network device.
cloud-init-nonet gave up waiting for a network device.
ci-info: lo : 1 127.0.0.1 255.0.0.0 .
ci-info: eth0 : 1 . . fa:16:3e:b8:91:44
route_info failed
Waiting for network configuration...
Waiting up to 60 more seconds for network configuration...
Booting system without full network configuration...
...
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130209/77b6498b/attachment.html>
More information about the Openstack
mailing list