Open Stack

Ok i started from scratch and now everything is working just fine. Thank you for all your help. 
In the end I believe it was because I did not have haproxy installed. 




________________________________
 From: Eugene Nikanorov <enikanorov at mirantis.com>
To: Jake G. <dj_dark_junglist at yahoo.com> 
Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org> 
Sent: Friday, August 9, 2013 7:50 PM
Subject: Re: [Openstack] Install/Enable Quantum lbass (load balancer) feature?
 


use_namespaces has no effect, lbaas agent in grizzly always relies on namespace support.

Could you execute the failing command manually? 
That needs to be done after you create a vip for the pool.
The command should look like this:
sudo quantum-rootwrap /etc/quantum/rootwrap.conf ip netns exec qlbaas-e10951cd-4cca-4ba4-acc0-0ccde6817029 haproxy -f /var
/lib/quantum/lbaas/e10951cd-4cca-4ba4-acc0-0ccde6817029/conf -p /var/lib/quantum/lbaas/e10951cd-4cca-4ba4-acc0-0ccde6817029/pid

<e10951cd-4cca-4ba4-acc0-0ccde6817029> should be replaced with actual pool_id

Could you also verify that path and file /lib/quantum/lbaas/e10951cd-4cca-4ba4-acc0-0ccde6817029/conf exist?

Thanks,
Eugene.



On Fri, Aug 9, 2013 at 12:39 PM, Jake G. <dj_dark_junglist at yahoo.com> wrote:

Yes this is my Kernel>  2.6.32-358.114.1.openstack.el6.x86_64
>and I enable: 
>
>
>use_namespaces = True
>
>ovs_use_veth = True
>
>
>in /etc/quantum/dhcp_agent.ini and etc/quantum/l3_agent.ini
>
>
>
>
>
>
>
>________________________________
> From: Eugene Nikanorov <enikanorov at mirantis.com>
>To: Jake G. <dj_dark_junglist at yahoo.com> 
>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org> 
>Sent: Friday, August 9, 2013 5:33 PM
>
>Subject: Re: [Openstack] Install/Enable Quantum lbass (load balancer) feature?
> 
>
>
>Jake, haproxy.cfg is created by lbaas agent when you deploy an instance.
>Are you sure your host os has namespace support?
>
>
>Eugene.
>
>
>
>On Fri, Aug 9, 2013 at 12:30 PM, Jake G. <dj_dark_junglist at yahoo.com> wrote:
>
>Good call!
>>Looks like i did but the service wont start. Do you have a sample haproxy.cfg file that will work with Openstack?
>>
>>
>>Thank you
>>
>>
>>
>>________________________________
>> From: Eugene Nikanorov <enikanorov at mirantis.com>
>>To: Jake G. <dj_dark_junglist at yahoo.com> 
>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org> 
>>Sent: Friday, August 9, 2013 3:08 PM
>>
>>Subject: Re: [Openstack] Install/Enable Quantum lbass (load balancer) feature?
>> 
>>
>>
>>Do you have haproxy package installed on your host?
>>
>>
>>
>>On Fri, Aug 9, 2013 at 9:41 AM, Jake G. <dj_dark_junglist at yahoo.com> wrote:
>>
>>I have enabled LBaas on my openstack, but after adding a pool, vip, members, and monitor successfully I am still unable to get load balancing working. 
>>>I found this blog to help me so far http://kimizhang.wordpress.com/2013/08/08/openstack-grizzly-quantum-advanced-features-2/
>>>
>>>
>>>When I run # ps -ef | grep haproxy I dont get much: 
>>>root 27508 2718 0 14:16 pts/1 00:00:00 grep haproxy
>>>
>>>
>>>My logs show an issue with haproxy:
>>>
>>>
>>>RuntimeError: 
>>>Command: ['sudo', 'quantum-rootwrap', '/etc/quantum/rootwrap.conf', 'ip', 'netns', 'exec', 'qlbaas-e10951cd-4cca-4ba4-acc0-0ccde6817029', 'haproxy', '-f', '/var
>>>/lib/quantum/lbaas/e10951cd-4cca-4ba4-acc0-0ccde6817029/conf', '-p', '/var/lib/quantum/lbaas/e10951cd-4cca-4ba4-acc0-0ccde6817029/pid']
>>>Exit code: 255
>>>Stdout: ''
>>>Stderr: 'exec of haproxy failed: No such file or directory\n'
>>>2013-08-09 14:16:17    ERROR [quantum.plugins.services.agent_loadbalancer.agent.manager] Unable to refresh device for pool: e10951cd-4cca-4ba4-acc0-0ccde6817029
>>>Traceback (most recent call last):
>>>  File "/usr/lib/python2.6/site-packages/quantum/plugins/services/agent_loadbalancer/agent/manager.py", line 189, in refresh_device
>>>    self.driver.create(logical_config)
>>>  File "/usr/lib/python2.6/site-packages/quantum/plugins/services/agent_loadbalancer/drivers/haproxy/namespace_driver.py", line 48, in create
>>>    self._spawn(logical_config)
>>>  File "/usr/lib/python2.6/site-packages/quantum/plugins/services/agent_loadbalancer/drivers/haproxy/namespace_driver.py", line 70, in _spawn
>>>    ns.netns.execute(cmd)
>>>  File "/usr/lib/python2.6/site-packages/quantum/agent/linux/ip_lib.py", line 414, in execute
>>>    check_exit_code=check_exit_code)
>>>  File "/usr/lib/python2.6/site-packages/quantum/agent/linux/utils.py", line 61, in execute
>>>    raise RuntimeError(m)
>>>
>>>
>>>Any ideas?
>>>
>>>
>>>
>>>________________________________
>>> From: Eugene Nikanorov <enikanorov at mirantis.com>
>>>To: Jake G. <dj_dark_junglist at yahoo.com> 
>>>Cc: "openstack at lists.openstack.org" <openstack at lists.openstack.org> 
>>>Sent: Thursday, August 8, 2013 7:04 PM
>>>Subject: Re: [Openstack] Install/Enable Quantum lbass (load balancer) feature?
>>> 
>>>
>>>
>>>Hi Jake,
>>>
>>>
>>>Regarding lbaas in grizzly working on RHEL/Centos - it may be problematic as host operation system must support network namespaces. 
>>>If you do have support for network namespaces then you need to do the following steps to setup lbaas service in quantum:
>>>
>>>
>>>
>>>1) specify lbaas plugin in quantum.conf:
>>>service_plugins= lbaas_plugin_classpath.
>>>check quantum/plugins/services/agent_loadbalancer/plugin.py for correct path as currently the name and path has changed.
>>>
>>>
>>>2) to enable lbaas service in horizon you need to do the following:
>>>add the following piece of code to horizon/openstack_dashboard/local/local_settings.py :
>>>
>>>
>>>OPENSTACK_QUANTUM_NETWORK = {
>>>    'enable_lb': False
>>>}
>>>
>>>
>>>3) start quantum-lbaas-agent on the host providing quantum.conf and lbaas-agent.ini. lbaas-agent.ini should reflect core plugin configuration (should have proper interface driver)
>>>
>>>
>>>Note that if host os has no namespace support, all of above will work (e.g. REST API will be functional), but you would not be able to deploy loadbalancer as lbaas agent can only work with namespaces.
>>>
>>>
>>>Thanks,
>>>Eugene.
>>>
>>>
>>>
>>>On Thu, Aug 8, 2013 at 1:14 PM, Jake G. <dj_dark_junglist at yahoo.com> wrote:
>>>
>>>Hi all!
>>>>How can we install/enable the Quantum-lbaas (load balancer) feature for Openstack Grizzly? I dont see any docs for RHEL/CentOS specific installs. 
>>>>I used RDO to deploy Openstack on a single node.
>>>>
>>>>
>>>>
>>>>Thank you! Jake
>>>>_______________________________________________
>>>>Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>Post to     : openstack at lists.openstack.org
>>>>Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openstack.org/pipermail/openstack/attachments/20130812/a9b02d2c/attachment.html>